Export limit exceeded: 110805 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (110805 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-40198 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ext4: avoid potential buffer over-read in parse_apply_sb_mount_options() Unlike other strings in the ext4 superblock, we rely on tune2fs to make sure s_mount_opts is NUL terminated. Harden parse_apply_sb_mount_options() by treating s_mount_opts as a potential __nonstring. | ||||
| CVE-2025-40053 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net: dlink: handle copy_thresh allocation failure The driver did not handle failure of `netdev_alloc_skb_ip_align()`. If the allocation failed, dereferencing `skb->protocol` could lead to a NULL pointer dereference. This patch tries to allocate `skb`. If the allocation fails, it falls back to the normal path. Tested-on: D-Link DGE-550T Rev-A3 | ||||
| CVE-2025-40048 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: uio_hv_generic: Let userspace take care of interrupt mask Remove the logic to set interrupt mask by default in uio_hv_generic driver as the interrupt mask value is supposed to be controlled completely by the user space. If the mask bit gets changed by the driver, concurrently with user mode operating on the ring, the mask bit may be set when it is supposed to be clear, and the user-mode driver will miss an interrupt which will cause a hang. For eg- when the driver sets inbound ring buffer interrupt mask to 1, the host does not interrupt the guest on the UIO VMBus channel. However, setting the mask does not prevent the host from putting a message in the inbound ring buffer. So let’s assume that happens, the host puts a message into the ring buffer but does not interrupt. Subsequently, the user space code in the guest sets the inbound ring buffer interrupt mask to 0, saying “Hey, I’m ready for interrupts”. User space code then calls pread() to wait for an interrupt. Then one of two things happens: * The host never sends another message. So the pread() waits forever. * The host does send another message. But because there’s already a message in the ring buffer, it doesn’t generate an interrupt. This is the correct behavior, because the host should only send an interrupt when the inbound ring buffer transitions from empty to not-empty. Adding an additional message to a ring buffer that is not empty is not supposed to generate an interrupt on the guest. Since the guest is waiting in pread() and not removing messages from the ring buffer, the pread() waits forever. This could be easily reproduced in hv_fcopy_uio_daemon if we delay setting interrupt mask to 0. Similarly if hv_uio_channel_cb() sets the interrupt_mask to 1, there’s a race condition. Once user space empties the inbound ring buffer, but before user space sets interrupt_mask to 0, the host could put another message in the ring buffer but it wouldn’t interrupt. Then the next pread() would hang. Fix these by removing all instances where interrupt_mask is changed, while keeping the one in set_event() unchanged to enable userspace control the interrupt mask by writing 0/1 to /dev/uioX. | ||||
| CVE-2025-40018 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ipvs: Defer ip_vs_ftp unregister during netns cleanup On the netns cleanup path, __ip_vs_ftp_exit() may unregister ip_vs_ftp before connections with valid cp->app pointers are flushed, leading to a use-after-free. Fix this by introducing a global `exiting_module` flag, set to true in ip_vs_ftp_exit() before unregistering the pernet subsystem. In __ip_vs_ftp_exit(), skip ip_vs_ftp unregister if called during netns cleanup (when exiting_module is false) and defer it to __ip_vs_cleanup_batch(), which unregisters all apps after all connections are flushed. If called during module exit, unregister ip_vs_ftp immediately. | ||||
| CVE-2025-39973 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: i40e: add validation for ring_len param The `ring_len` parameter provided by the virtual function (VF) is assigned directly to the hardware memory context (HMC) without any validation. To address this, introduce an upper boundary check for both Tx and Rx queue lengths. The maximum number of descriptors supported by the hardware is 8k-32. Additionally, enforce alignment constraints: Tx rings must be a multiple of 8, and Rx rings must be a multiple of 32. | ||||
| CVE-2025-40171 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: nvmet-fc: move lsop put work to nvmet_fc_ls_req_op It’s possible for more than one async command to be in flight from __nvmet_fc_send_ls_req. For each command, a tgtport reference is taken. In the current code, only one put work item is queued at a time, which results in a leaked reference. To fix this, move the work item to the nvmet_fc_ls_req_op struct, which already tracks all resources related to the command. | ||||
| CVE-2025-39957 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: increase scan_ies_len for S1G Currently the S1G capability element is not taken into account for the scan_ies_len, which leads to a buffer length validation failure in ieee80211_prep_hw_scan() and subsequent WARN in __ieee80211_start_scan(). This prevents hw scanning from functioning. To fix ensure we accommodate for the S1G capability length. | ||||
| CVE-2025-40183 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix metadata_dst leak __bpf_redirect_neigh_v{4,6} Cilium has a BPF egress gateway feature which forces outgoing K8s Pod traffic to pass through dedicated egress gateways which then SNAT the traffic in order to interact with stable IPs outside the cluster. The traffic is directed to the gateway via vxlan tunnel in collect md mode. A recent BPF change utilized the bpf_redirect_neigh() helper to forward packets after the arrival and decap on vxlan, which turned out over time that the kmalloc-256 slab usage in kernel was ever-increasing. The issue was that vxlan allocates the metadata_dst object and attaches it through a fake dst entry to the skb. The latter was never released though given bpf_redirect_neigh() was merely setting the new dst entry via skb_dst_set() without dropping an existing one first. | ||||
| CVE-2025-39855 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ice: fix NULL access of tx->in_use in ice_ptp_ts_irq The E810 device has support for a "low latency" firmware interface to access and read the Tx timestamps. This interface does not use the standard Tx timestamp logic, due to the latency overhead of proxying sideband command requests over the firmware AdminQ. The logic still makes use of the Tx timestamp tracking structure, ice_ptp_tx, as it uses the same "ready" bitmap to track which Tx timestamps complete. Unfortunately, the ice_ptp_ts_irq() function does not check if the tracker is initialized before its first access. This results in NULL dereference or use-after-free bugs similar to the following: [245977.278756] BUG: kernel NULL pointer dereference, address: 0000000000000000 [245977.278774] RIP: 0010:_find_first_bit+0x19/0x40 [245977.278796] Call Trace: [245977.278809] ? ice_misc_intr+0x364/0x380 [ice] This can occur if a Tx timestamp interrupt races with the driver reset logic. Fix this by only checking the in_use bitmap (and other fields) if the tracker is marked as initialized. The reset flow will clear the init field under lock before it tears the tracker down, thus preventing any use-after-free or NULL access. | ||||
| CVE-2025-39963 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: io_uring: fix incorrect io_kiocb reference in io_link_skb In io_link_skb function, there is a bug where prev_notif is incorrectly assigned using 'nd' instead of 'prev_nd'. This causes the context validation check to compare the current notification with itself instead of comparing it with the previous notification. Fix by using the correct prev_nd parameter when obtaining prev_notif. | ||||
| CVE-2025-39929 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix smbdirect_recv_io leak in smbd_negotiate() error path During tests of another unrelated patch I was able to trigger this error: Objects remaining on __kmem_cache_shutdown() | ||||
| CVE-2025-40173 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/ip6_tunnel: Prevent perpetual tunnel growth Similarly to ipv4 tunnel, ipv6 version updates dev->needed_headroom, too. While ipv4 tunnel headroom adjustment growth was limited in commit 5ae1e9922bbd ("net: ip_tunnel: prevent perpetual headroom growth"), ipv6 tunnel yet increases the headroom without any ceiling. Reflect ipv4 tunnel headroom adjustment limit on ipv6 version. Credits to Francesco Ruggeri, who was originally debugging this issue and wrote local Arista-specific patch and a reproducer. | ||||
| CVE-2025-39994 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: media: tuner: xc5000: Fix use-after-free in xc5000_release The original code uses cancel_delayed_work() in xc5000_release(), which does not guarantee that the delayed work item timer_sleep has fully completed if it was already running. This leads to use-after-free scenarios where xc5000_release() may free the xc5000_priv while timer_sleep is still active and attempts to dereference the xc5000_priv. A typical race condition is illustrated below: CPU 0 (release thread) | CPU 1 (delayed work callback) xc5000_release() | xc5000_do_timer_sleep() cancel_delayed_work() | hybrid_tuner_release_state(priv) | kfree(priv) | | priv = container_of() // UAF Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure that the timer_sleep is properly canceled before the xc5000_priv memory is deallocated. A deadlock concern was considered: xc5000_release() is called in a process context and is not holding any locks that the timer_sleep work item might also need. Therefore, the use of the _sync() variant is safe here. This bug was initially identified through static analysis. [hverkuil: fix typo in Subject: tunner -> tuner] | ||||
| CVE-2025-38710 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: gfs2: Validate i_depth for exhash directories A fuzzer test introduced corruption that ends up with a depth of 0 in dir_e_read(), causing an undefined shift by 32 at: index = hash >> (32 - dip->i_depth); As calculated in an open-coded way in dir_make_exhash(), the minimum depth for an exhash directory is ilog2(sdp->sd_hash_ptrs) and 0 is invalid as sdp->sd_hash_ptrs is fixed as sdp->bsize / 16 at mount time. So we can avoid the undefined behaviour by checking for depth values lower than the minimum in gfs2_dinode_in(). Values greater than the maximum are already being checked for there. Also switch the calculation in dir_make_exhash() to use ilog2() to clarify how the depth is calculated. Tested with the syzkaller repro.c and xfstests '-g quick'. | ||||
| CVE-2025-40038 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Skip fastpath emulation on VM-Exit if next RIP isn't valid Skip the WRMSR and HLT fastpaths in SVM's VM-Exit handler if the next RIP isn't valid, e.g. because KVM is running with nrips=false. SVM must decode and emulate to skip the instruction if the CPU doesn't provide the next RIP, and getting the instruction bytes to decode requires reading guest memory. Reading guest memory through the emulator can fault, i.e. can sleep, which is disallowed since the fastpath handlers run with IRQs disabled. BUG: sleeping function called from invalid context at ./include/linux/uaccess.h:106 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 32611, name: qemu preempt_count: 1, expected: 0 INFO: lockdep is turned off. irq event stamp: 30580 hardirqs last enabled at (30579): [<ffffffffc08b2527>] vcpu_run+0x1787/0x1db0 [kvm] hardirqs last disabled at (30580): [<ffffffffb4f62e32>] __schedule+0x1e2/0xed0 softirqs last enabled at (30570): [<ffffffffb4247a64>] fpu_swap_kvm_fpstate+0x44/0x210 softirqs last disabled at (30568): [<ffffffffb4247a64>] fpu_swap_kvm_fpstate+0x44/0x210 CPU: 298 UID: 0 PID: 32611 Comm: qemu Tainted: G U 6.16.0-smp--e6c618b51cfe-sleep #782 NONE Tainted: [U]=USER Hardware name: Google Astoria-Turin/astoria, BIOS 0.20241223.2-0 01/17/2025 Call Trace: <TASK> dump_stack_lvl+0x7d/0xb0 __might_resched+0x271/0x290 __might_fault+0x28/0x80 kvm_vcpu_read_guest_page+0x8d/0xc0 [kvm] kvm_fetch_guest_virt+0x92/0xc0 [kvm] __do_insn_fetch_bytes+0xf3/0x1e0 [kvm] x86_decode_insn+0xd1/0x1010 [kvm] x86_emulate_instruction+0x105/0x810 [kvm] __svm_skip_emulated_instruction+0xc4/0x140 [kvm_amd] handle_fastpath_invd+0xc4/0x1a0 [kvm] vcpu_run+0x11a1/0x1db0 [kvm] kvm_arch_vcpu_ioctl_run+0x5cc/0x730 [kvm] kvm_vcpu_ioctl+0x578/0x6a0 [kvm] __se_sys_ioctl+0x6d/0xb0 do_syscall_64+0x8a/0x2c0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f479d57a94b </TASK> Note, this is essentially a reapply of commit 5c30e8101e8d ("KVM: SVM: Skip WRMSR fastpath on VM-Exit if next RIP isn't valid"), but with different justification (KVM now grabs SRCU when skipping the instruction for other reasons). | ||||
| CVE-2025-40026 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.9 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Don't (re)check L1 intercepts when completing userspace I/O When completing emulation of instruction that generated a userspace exit for I/O, don't recheck L1 intercepts as KVM has already finished that phase of instruction execution, i.e. has already committed to allowing L2 to perform I/O. If L1 (or host userspace) modifies the I/O permission bitmaps during the exit to userspace, KVM will treat the access as being intercepted despite already having emulated the I/O access. Pivot on EMULTYPE_NO_DECODE to detect that KVM is completing emulation. Of the three users of EMULTYPE_NO_DECODE, only complete_emulated_io() (the intended "recipient") can reach the code in question. gp_interception()'s use is mutually exclusive with is_guest_mode(), and complete_emulated_insn_gp() unconditionally pairs EMULTYPE_NO_DECODE with EMULTYPE_SKIP. The bad behavior was detected by a syzkaller program that toggles port I/O interception during the userspace I/O exit, ultimately resulting in a WARN on vcpu->arch.pio.count being non-zero due to KVM no completing emulation of the I/O instruction. WARNING: CPU: 23 PID: 1083 at arch/x86/kvm/x86.c:8039 emulator_pio_in_out+0x154/0x170 [kvm] Modules linked in: kvm_intel kvm irqbypass CPU: 23 UID: 1000 PID: 1083 Comm: repro Not tainted 6.16.0-rc5-c1610d2d66b1-next-vm #74 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:emulator_pio_in_out+0x154/0x170 [kvm] PKRU: 55555554 Call Trace: <TASK> kvm_fast_pio+0xd6/0x1d0 [kvm] vmx_handle_exit+0x149/0x610 [kvm_intel] kvm_arch_vcpu_ioctl_run+0xda8/0x1ac0 [kvm] kvm_vcpu_ioctl+0x244/0x8c0 [kvm] __x64_sys_ioctl+0x8a/0xd0 do_syscall_64+0x5d/0xc60 entry_SYSCALL_64_after_hwframe+0x4b/0x53 </TASK> | ||||
| CVE-2025-39902 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-10-19 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/slub: avoid accessing metadata when pointer is invalid in object_err() object_err() reports details of an object for further debugging, such as the freelist pointer, redzone, etc. However, if the pointer is invalid, attempting to access object metadata can lead to a crash since it does not point to a valid object. One known path to the crash is when alloc_consistency_checks() determines the pointer to the allocated object is invalid because of a freelist corruption, and calls object_err() to report it. The debug code should report and handle the corruption gracefully and not crash in the process. In case the pointer is NULL or check_valid_pointer() returns false for the pointer, only print the pointer value and skip accessing metadata. | ||||
| CVE-2025-40186 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: tcp: Don't call reqsk_fastopen_remove() in tcp_conn_request(). syzbot reported the splat below in tcp_conn_request(). [0] If a listener is close()d while a TFO socket is being processed in tcp_conn_request(), inet_csk_reqsk_queue_add() does not set reqsk->sk and calls inet_child_forget(), which calls tcp_disconnect() for the TFO socket. After the cited commit, tcp_disconnect() calls reqsk_fastopen_remove(), where reqsk_put() is called due to !reqsk->sk. Then, reqsk_fastopen_remove() in tcp_conn_request() decrements the last req->rsk_refcnt and frees reqsk, and __reqsk_free() at the drop_and_free label causes the refcount underflow for the listener and double-free of the reqsk. Let's remove reqsk_fastopen_remove() in tcp_conn_request(). Note that other callers make sure tp->fastopen_rsk is not NULL. [0]: refcount_t: underflow; use-after-free. WARNING: CPU: 12 PID: 5563 at lib/refcount.c:28 refcount_warn_saturate (lib/refcount.c:28) Modules linked in: CPU: 12 UID: 0 PID: 5563 Comm: syz-executor Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/12/2025 RIP: 0010:refcount_warn_saturate (lib/refcount.c:28) Code: ab e8 8e b4 98 ff 0f 0b c3 cc cc cc cc cc 80 3d a4 e4 d6 01 00 75 9c c6 05 9b e4 d6 01 01 48 c7 c7 e8 df fb ab e8 6a b4 98 ff <0f> 0b e9 03 5b 76 00 cc 80 3d 7d e4 d6 01 00 0f 85 74 ff ff ff c6 RSP: 0018:ffffa79fc0304a98 EFLAGS: 00010246 RAX: d83af4db1c6b3900 RBX: ffff9f65c7a69020 RCX: d83af4db1c6b3900 RDX: 0000000000000000 RSI: 00000000ffff7fff RDI: ffffffffac78a280 RBP: 000000009d781b60 R08: 0000000000007fff R09: ffffffffac6ca280 R10: 0000000000017ffd R11: 0000000000000004 R12: ffff9f65c7b4f100 R13: ffff9f65c7d23c00 R14: ffff9f65c7d26000 R15: ffff9f65c7a64ef8 FS: 00007f9f962176c0(0000) GS:ffff9f65fcf00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000200000000180 CR3: 000000000dbbe006 CR4: 0000000000372ef0 Call Trace: <IRQ> tcp_conn_request (./include/linux/refcount.h:400 ./include/linux/refcount.h:432 ./include/linux/refcount.h:450 ./include/net/sock.h:1965 ./include/net/request_sock.h:131 net/ipv4/tcp_input.c:7301) tcp_rcv_state_process (net/ipv4/tcp_input.c:6708) tcp_v6_do_rcv (net/ipv6/tcp_ipv6.c:1670) tcp_v6_rcv (net/ipv6/tcp_ipv6.c:1906) ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:438) ip6_input (net/ipv6/ip6_input.c:500) ipv6_rcv (net/ipv6/ip6_input.c:311) __netif_receive_skb (net/core/dev.c:6104) process_backlog (net/core/dev.c:6456) __napi_poll (net/core/dev.c:7506) net_rx_action (net/core/dev.c:7569 net/core/dev.c:7696) handle_softirqs (kernel/softirq.c:579) do_softirq (kernel/softirq.c:480) </IRQ> | ||||
| CVE-2025-38735 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: gve: prevent ethtool ops after shutdown A crash can occur if an ethtool operation is invoked after shutdown() is called. shutdown() is invoked during system shutdown to stop DMA operations without performing expensive deallocations. It is discouraged to unregister the netdev in this path, so the device may still be visible to userspace and kernel helpers. In gve, shutdown() tears down most internal data structures. If an ethtool operation is dispatched after shutdown(), it will dereference freed or NULL pointers, leading to a kernel panic. While graceful shutdown normally quiesces userspace before invoking the reboot syscall, forced shutdowns (as observed on GCP VMs) can still trigger this path. Fix by calling netif_device_detach() in shutdown(). This marks the device as detached so the ethtool ioctl handler will skip dispatching operations to the driver. | ||||
| CVE-2025-39750 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: Correct tid cleanup when tid setup fails Currently, if any error occurs during ath12k_dp_rx_peer_tid_setup(), the tid value is already incremented, even though the corresponding TID is not actually allocated. Proceed to ath12k_dp_rx_peer_tid_delete() starting from unallocated tid, which might leads to freeing unallocated TID and cause potential crash or out-of-bounds access. Hence, fix by correctly decrementing tid before cleanup to match only the successfully allocated TIDs. Also, remove tid-- from failure case of ath12k_dp_rx_peer_frag_setup(), as decrementing the tid before cleanup in loop will take care of this. Compile tested only. | ||||