Export limit exceeded: 409424 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 25283 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25283 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-63913 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: conntrack: tcp: do not force CLOSE on invalid-seq RST without direction check An unintended behavior in the TCP conntrack state machine allows a connection to be forced into the CLOSE state using an RST packet with an invalid sequence number. Specifically, after a SYN packet is observed, an RST with an invalid SEQ can transition the conntrack entry to TCP_CONNTRACK_CLOSE, regardless of whether the RST corresponds to the expected reply direction. The relevant code path assumes the RST is a response to an outgoing SYN, but does not validate packet direction or ensure that a matching SYN was actually sent in the opposite direction. As a result, a crafted packet sequence consisting of a SYN followed by an invalid-sequence RST can prematurely terminate an active NAT entry. This makes connection teardown easier than intended. So, tighten the state transition logic to ensure that RST-triggered CLOSE transitions only occur when the RST is a valid response to a previously observed SYN in the correct direction. | ||||
| CVE-2026-63894 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_fs: serialize DMABUF cancel against request completion ffs_epfile_dmabuf_io_complete() calls usb_ep_free_request() on the completed request but leaves priv->req, the back-pointer that ffs_dmabuf_transfer() set on submission, pointing at the freed memory. A later FUNCTIONFS_DMABUF_DETACH ioctl or ffs_epfile_release() on the close path still sees priv->req non-NULL under ffs->eps_lock: if (priv->ep && priv->req) usb_ep_dequeue(priv->ep, priv->req); so usb_ep_dequeue() is called on a freed usb_request. On dummy_hcd the dequeue path only walks a live queue and pointer-compares, so the freed pointer reads without faulting and KASAN requires an explicit check at the FunctionFS call site to surface the use-after-free. On SG-capable in-tree UDCs the dequeue path dereferences the supplied request immediately: * chipidea's ep_dequeue() does container_of(req, struct ci_hw_req, req) and reads hwreq->req.status before acquiring its own lock. * cdnsp's cdnsp_gadget_ep_dequeue() reads request->status first. The narrower option of clearing priv->req via cmpxchg() in the completion does not close the race: the completion runs without eps_lock, so a cancel path holding eps_lock can still observe priv->req non-NULL, race a concurrent completion that clears and frees, and pass the freed pointer to usb_ep_dequeue(). A slightly longer fix that moves the free into the cleanup work is needed. Same class of lifetime race as the recent usbip-vudc timer fix [1]. Take eps_lock in the sole place that mutates priv->req from the callback direction by moving usb_ep_free_request() out of the completion into ffs_dmabuf_cleanup(), the existing work handler scheduled by ffs_dmabuf_signal_done() on ffs->io_completion_wq. Clear priv->req there under eps_lock before freeing, and only clear if priv->req still names our request (a subsequent ffs_dmabuf_transfer() on the same attachment may have queued a new one). This keeps the existing dummy_hcd sync-dequeue invariant: the completion callback is still invoked by the UDC without eps_lock held (dummy_hcd drops its own lock before calling the callback), and the callback now takes no f_fs lock at all. Serialization against the cancel path happens in cleanup, which runs from the workqueue with no f_fs lock held on entry. The priv ref count protects the containing ffs_dmabuf_priv: ffs_dmabuf_transfer() takes a ref via ffs_dmabuf_get(), cleanup drops it via ffs_dmabuf_put(), so priv stays live for the cleanup even after the cancel path's list_del + ffs_dmabuf_put. The ffs_dmabuf_transfer() error path no longer frees usb_req inline: fence->req and fence->ep are set before usb_ep_queue(), so ffs_dmabuf_cleanup() (scheduled by the error-path ffs_dmabuf_signal_done()) owns the free regardless of whether the queue succeeded. Reproduced under KASAN on both detach and close paths against dummy_hcd with an observability hook (kasan_check_byte(priv->req) immediately before usb_ep_dequeue) at the two FunctionFS cancel sites to surface the stale-pointer access; the hook is not part of this patch. The KASAN allocator / free stacks in the captured splats identify the same request: alloc in dummy_alloc_request, free in dummy_timer, fault reached from ffs_epfile_release (close) and from the FUNCTIONFS_DMABUF_DETACH ioctl (detach). With the patch applied, both paths are silent under the same hook. The bug is reached from the FunctionFS device node, which in real deployments is owned by the privileged gadget daemon (adbd, UMS, composite gadget services, etc.); it is not reachable from unprivileged userspace or from a USB host on the cable. FunctionFS mounts default to GLOBAL_ROOT_UID, but the filesystem supports uid=, gid=, and fmode= delegation to a non-root gadget daemon, so on real deployments the attacker may be a less-privileged service rather than root. | ||||
| CVE-2026-63863 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/gpusvm: Fix unbalanced unlock in drm_gpusvm_scan_mm() There is a unbalanced lock/unlock to gpusvm notifier lock: [ 931.045868] ===================================== [ 931.046509] WARNING: bad unlock balance detected! [ 931.047149] 6.19.0-rc6+xe-**************** #9 Tainted: G U [ 931.048150] ------------------------------------- [ 931.048790] kworker/u5:0/51 is trying to release lock (&gpusvm->notifier_lock) at: [ 931.049801] [<ffffffffa090c0d8>] drm_gpusvm_scan_mm+0x188/0x460 [drm_gpusvm_helper] [ 931.050802] but there are no more locks to release! [ 931.051463] The drm_gpusvm_notifier_unlock() sits under err_free label and the first jump to err_free is just before calling the drm_gpusvm_notifier_lock() causing unbalanced unlock. | ||||
| CVE-2026-8635 | 5 Apple, Ibm, Langflow and 2 more | 5 Macos, Langflow Oss, Langflow and 2 more | 2026-07-21 | 9.9 Critical |
| IBM Langflow OSS 1.0.0 through 1.10.0 allows authenticated users to escalate privileges to superuser by directly manipulating the database, execute arbitrary system commands, and achieve full system compromise with Langflow service permissions. | ||||
| CVE-2026-9135 | 5 Apple, Ibm, Langflow and 2 more | 5 Macos, Langflow Oss, Langflow and 2 more | 2026-07-20 | 9.9 Critical |
| IBM Langflow OSS 1.0.0 through 1.10.0 Langflow versions up to 1.9.2 (commit 94981c443d4918517b9e8163d70fc598dc33a32d) contain a code injection vulnerability in the Policies component's ToolGuard integration that bypasses the allow_custom_components=false security control. The vulnerability exists because the validation mechanism only checks the main component source code in node_template["code"]["value"] but fails to validate dynamic CodeInput fields that store generated ToolGuard Python files. Attackers can embed malicious Python code in these unvalidated dynamic fields, which are persisted in Flow.data and later executed server-side when a guarded tool is invoked through the ToolGuard runtime. This allows authenticated users with flow creation privileges to achieve arbitrary Python code execution on the backend despite custom component restrictions. The vulnerability can be escalated through cross-tenant flow manipulation via the agentic MCP update_flow_component_field tool, which accepts attacker-controlled user_id parameters, enabling attackers to inject malicious code into victim users' flows. When combined with publicly accessible flows and specific misconfigurations (AUTO_LOGIN=true, NEW_USER_IS_ACTIVE=true), the attack can be conducted with reduced authentication requirements. | ||||
| CVE-2026-8056 | 5 Apple, Ibm, Langflow and 2 more | 5 Macos, Langflow Oss, Langflow and 2 more | 2026-07-20 | 8.8 High |
| IBM Langflow OSS 1.0.0 through 1.10.0 allows authenticated users to override component parameters at runtime via the API. A critical security flaw exists in the parameter filtering mechanism within the `apply_tweaks()` function. | ||||
| CVE-2026-13445 | 5 Apple, Ibm, Langflow and 2 more | 5 Macos, Langflow Oss, Langflow and 2 more | 2026-07-20 | 8.1 High |
| IBM Langflow OSS 1.0.0 through 1.10.1 can allow an authenticated attacker to exploit the SaveToFile component to read and modify another user's uploaded files by specifying absolute paths pointing to victim storage locations. In append mode, the attacker's workflow reads victim file contents, appends attacker-controlled data, and uploads a copy containing victim data to the attacker's namespace (confidentiality breach). In overwrite mode, the attacker can replace victim file contents with arbitrary data (integrity breach). This breaks the storage ownership boundary between users. | ||||
| CVE-2026-8476 | 5 Apple, Ibm, Langflow and 2 more | 5 Macos, Langflow Oss, Langflow and 2 more | 2026-07-20 | 9.9 Critical |
| IBM Langflow OSS 1.0.0 through 1.10.0 contain a critical remote code execution vulnerability in the disk-based caching mechanism. The AsyncDiskCache class uses Python's unsafe pickle.loads() function to deserialize cached objects from disk without validation, integrity verification, or authentication, enabling arbitrary code execution when malicious pickle payloads are processed. Attackers who can influence cached data through file system access, malicious workflow inputs, custom components, or API manipulation can achieve complete system compromise with the privileges of the Langflow server process. | ||||
| CVE-2026-63866 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: Clear wcid pointer in mt7996_mac_sta_deinit_link() Clear WCID pointer removing the sta link in mt7996_mac_sta_deinit_link routine. | ||||
| CVE-2026-63854 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/vcn: set no_user_fence for VCN v3.0 enc/dec rings VCN encoder and decoder rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit 663bed3c7b8b9a7624b0d95d300ddae034ad0614) | ||||
| CVE-2026-63853 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/vcn: set no_user_fence for VCN v4.0 enc ring VCN encoder and decoder rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit fd852c048b46f9825e904a4f3f4538fe9d8827d9) | ||||
| CVE-2026-63851 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/vcn: set no_user_fence for VCN v4.0.5 enc ring VCN encoder and decoder rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit 084d94ac93707bdda07efb5cee786f632de4219b) | ||||
| CVE-2026-63850 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/vcn: set no_user_fence for VCN v5.0.0 enc ring VCN encoder and decoder rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit 49b1fbbb5a071197ee71e2d70959b1cb29bdc317) | ||||
| CVE-2026-63848 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/jpeg: set no_user_fence for JPEG v2.0 ring JPEG rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit 96179da0c6b059eb31706a0abe8dd6381c533143) | ||||
| CVE-2026-63847 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/jpeg: set no_user_fence for JPEG v2.5 ring JPEG rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit 3216a7f4e2642bda5fd14f57586e835ae9202587) | ||||
| CVE-2026-63845 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/jpeg: set no_user_fence for JPEG v4.0 ring JPEG rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit 8d0cac9478a3f046279c657d6a2545de49ae675a) | ||||
| CVE-2026-63844 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/jpeg: set no_user_fence for JPEG v4.0.3 ring JPEG rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit 2f6afc97d259d530f4f86c7743efbc573a8da927) | ||||
| CVE-2026-63841 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/jpeg: set no_user_fence for JPEG v5.0.1 ring JPEG rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit 742a98e2e81702df8fe1b1eccee5223220a03dc2) | ||||
| CVE-2026-63840 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/jpeg: set no_user_fence for JPEG v5.3.0 ring JPEG rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit 86ac011ae234c03fb872f4945913391ea1d8862e) | ||||
| CVE-2026-63825 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: gcov: use atomic counter updates to fix concurrent access crashes GCC's GCOV instrumentation can merge global branch counters with loop induction variables as an optimization. In inflate_fast(), the inner copy loops get transformed so that the GCOV counter value is loaded multiple times to compute the loop base address, start index, and end bound. Since GCOV counters are global (not per-CPU), concurrent execution on different CPUs causes the counter to change between loads, producing inconsistent values and out-of-bounds memory writes. The crash manifests during IPComp (IP Payload Compression) processing when inflate_fast() runs concurrently on multiple CPUs: BUG: unable to handle page fault for address: ffffd0a3c0902ffa RIP: inflate_fast+1431 Call Trace: zlib_inflate __deflate_decompress crypto_comp_decompress ipcomp_decompress [xfrm_ipcomp] ipcomp_input [xfrm_ipcomp] xfrm_input At the crash point, the compiler generated three loads from the same global GCOV counter (__gcov0.inflate_fast+216) to compute base, start, and end for an indexed loop. Another CPU modified the counter between loads, making the values inconsistent - the write went 3.4 MB past a 65 KB buffer. Add -fprofile-update=prefer-atomic to CFLAGS_GCOV at the global level in the top-level Makefile, guarded by a try-run compile test. The test compiles a minimal program with and without -fprofile-update=prefer-atomic using the full KBUILD_CFLAGS, then compares undefined symbols in the resulting object files. If prefer-atomic introduces new undefined references (such as __atomic_fetch_add_8 on i386 or __aarch64_ldadd8_relax on arm64 with outline-atomics), the flag is not added -- the kernel does not link against libatomic. On architectures where GCC inlines 64-bit atomic counter updates (x86_64, s390, ...) the test passes and the flag is enabled, preventing the compiler from merging counters with loop induction variables and fixing the observed concurrent-access crash. On architectures where the flag would introduce libatomic dependencies, it is silently omitted and behaviour is no worse than before this patch. Move the CFLAGS_GCOV block from its original position (before the arch Makefile include) to after the core KBUILD_CFLAGS assignments but before the scripts/Makefile.gcc-plugins include. This placement ensures the try-run test sees arch-specific flags (-m32, -march=, -mno-outline-atomics) while avoiding GCC plugin flags (-fplugin=) that would break the test on clean builds when plugin shared objects do not yet exist. | ||||