Export limit exceeded: 18136 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (18136 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-13514 | 1 Wordpress | 1 Wordpress | 2026-04-15 | 4.3 Medium |
| The B Slider- Gutenberg Slider Block for WP plugin for WordPress is vulnerable to Information Exposure in all versions up to, and including, 1.9.5 via the 'bsb-slider' shortcode due to insufficient restrictions on which posts can be included. This makes it possible for authenticated attackers, with Contributor-level access and above, to extract data from private posts that they should not have access to. | ||||
| CVE-2023-38298 | 2026-04-15 | 8.8 High | ||
| Various software builds for the following TCL devices (30Z, A3X, 20XE, 10L) leak the device IMEI to a system property that can be accessed by any local app on the device without any permissions or special privileges. Google restricted third-party apps from directly obtaining non-resettable device identifiers in Android 10 and higher, but in these instances they are leaked by a high-privilege process and can be obtained indirectly. The software build fingerprints for each confirmed vulnerable device are as follows: TCL 30Z (TCL/4188R/Jetta_ATT:12/SP1A.210812.016/LV8E:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU5P:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU61:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU66:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU68:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU6P:user/release-keys, and TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU6X:user/release-keys); TCL A3X (TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vAAZ:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vAB3:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vAB7:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vABA:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vABM:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vABP:user/release-keys, and TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vABS:user/release-keys); TCL 20XE (TCL/5087Z_BO/Doha_TMO:11/RP1A.200720.011/PB7I-0:user/release-keys and TCL/5087Z_BO/Doha_TMO:11/RP1A.200720.011/PB83-0:user/release-keys); and TCL 10L (TCL/T770B/T1_LITE:10/QKQ1.200329.002/3CJ0:user/release-keys and TCL/T770B/T1_LITE:11/RKQ1.210107.001/8BIC:user/release-keys). This malicious app reads from the "gsm.device.imei0" system property to indirectly obtain the device IMEI. | ||||
| CVE-2023-38297 | 2026-04-15 | 8.4 High | ||
| An issue was discovered in a third-party com.factory.mmigroup component, shipped on devices from multiple device manufacturers. Certain software builds for various Android devices contain a vulnerable pre-installed app with a package name of com.factory.mmigroup (versionCode='3', versionName='2.1) that allows local third-party apps to perform various actions, due to inadequate access control, in its context (system user), but the functionalities exposed depend on the specific device. The following capabilities are exposed to zero-permission, third-party apps on the following devices: arbitrary AT command execution via AT command injection (T-Mobile Revvl 6 Pro 5G, T-Mobile Revvl V+ 5G, and Boost Mobile Celero 5G); programmatic factory reset (Samsung Galaxy A03S, T-Mobile Revvl 6 Pro 5G, T-Mobile Revvl V+ 5G, Boost Mobile Celero, Realme C25Y, and Lenovo Tab M8 HD), leaking IMEI (Samsung Galaxy A03S, T-Mobile Revvl 6 Pro 5G, T-Mobile Revvl V+ 5G, Boost Mobile Celero, and Realme C25Y); leaking serial number (Samsung Galaxy A03s, T-Mobile Revvl 6 Pro 5G, T-Mobile Revvl V+ 5G, Boost Mobile Celero, Realme C25Y, and Lenovo Tab M8 HD); powering off the device (Realme C25Y, Samsung Galaxy A03S, and T-Mobile Revvl 6 Pro 5G); and programmatically enabling/disabling airplane mode (Samsung Galaxy A03S, T-Mobile Revvl 6 Pro 5G, T-Mobile Revvl V+ 5G, Boost Mobile Celero, and Realme C25Y); and enabling Wi-Fi, Bluetooth, and GPS (Samsung Galaxy A03S, T-Mobile Revvl 6 Pro 5G, T-Mobile Revvl V+ 5G, Boost Mobile Celero, and Realme C25Y). No permissions or special privileges are necessary to exploit the vulnerabilities in the com.factory.mmigroup app. No user interaction is required beyond installing and running a third-party app. The software build fingerprints for each confirmed vulnerable device are as follows: Boost Mobile Celero 5G (Celero5G/Jupiter/Jupiter:11/RP1A.200720.011/SW_S98119AA1_V067:user/release-keys, Celero5G/Jupiter/Jupiter:11/RP1A.200720.011/SW_S98119AA1_V064:user/release-keys, Celero5G/Jupiter/Jupiter:11/RP1A.200720.011/SW_S98119AA1_V061:user/release-keys, and Celero5G/Jupiter/Jupiter:11/RP1A.200720.011/SW_S98119AA1_V052:user/release-keys); Samsung Galaxy A03S (samsung/a03sutfn/a03su:13/TP1A.220624.014/S134DLUDU6CWB6:user/release-keys and samsung/a03sutfn/a03su:12/SP1A.210812.016/S134DLUDS5BWA1:user/release-keys); Lenovo Tab M8 HD (Lenovo/LenovoTB-8505F/8505F:10/QP1A.190711.020/S300637_220706_BMP:user/release-keys and Lenovo/LenovoTB-8505F/8505F:10/QP1A.190711.020/S300448_220114_BMP:user/release-keys); T-Mobile Revvl 6 Pro 5G (T-Mobile/Augusta/Augusta:12/SP1A.210812.016/SW_S98121AA1_V070:user/release-keys and T-Mobile/Augusta/Augusta:12/SP1A.210812.016/SW_S98121AA1_V066:user/release-keys); T-Mobile Revvl V+ 5G (T-Mobile/Sprout/Sprout:11/RP1A.200720.011/SW_S98115AA1_V077:user/release-keys and T-Mobile/Sprout/Sprout:11/RP1A.200720.011/SW_S98115AA1_V060:user/release-keys); and Realme C25Y (realme/RMX3269/RED8F6:11/RP1A.201005.001/1675861640000:user/release-keys, realme/RMX3269/RED8F6:11/RP1A.201005.001/1664031768000:user/release-keys, realme/RMX3269/RED8F6:11/RP1A.201005.001/1652814687000:user/release-keys, and realme/RMX3269/RED8F6:11/RP1A.201005.001/1635785712000:user/release-keys). This malicious app sends a broadcast Intent to com.factory.mmigroup/.MMIGroupReceiver. This causes the com.factory.mmigroup app to dynamically register for various action strings. The malicious app can then send these strings, allowing it to perform various behaviors that the com.factory.mmigroup app exposes. The actual behaviors exposed by the com.factory.mmigroup app depend on device model and chipset. The com.factory.mmigroup app executes as the "system" user, allowing it to interact with the baseband processor and perform various other sensitive actions. | ||||
| CVE-2023-38296 | 1 Tcl | 1 30z Firmware | 2026-04-15 | 8 High |
| Various software builds for the following TCL 30Z and TCL A3X devices leak the ICCID to a system property that can be accessed by any local app on the device without any permissions or special privileges. Google restricted third-party apps from directly obtaining non-resettable device identifiers in Android 10 and higher, but in these instances they are leaked by a high-privilege process and can be obtained indirectly. The software build fingerprints for each confirmed vulnerable device are as follows: TCL 30Z (TCL/4188R/Jetta_ATT:12/SP1A.210812.016/LV8E:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU5P:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU61:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU66:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU68:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU6P:user/release-keys, and TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU6X:user/release-keys) and TCL A3X (TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vAAZ:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vAB3:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vAB7:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vABA:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vABM:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vABP:user/release-keys, and TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vABS:user/release-keys). This malicious app reads from the "persist.sys.tctPowerIccid" system property to indirectly obtain the ICCID. | ||||
| CVE-2024-1726 | 1 Redhat | 1 Quarkus | 2026-04-15 | 5.3 Medium |
| A flaw was discovered in the RESTEasy Reactive implementation in Quarkus. Due to security checks for some JAX-RS endpoints being performed after serialization, more processing resources are consumed while the HTTP request is checked. In certain configurations, if an attacker has knowledge of any POST, PUT, or PATCH request paths, they can potentially identify vulnerable endpoints and trigger excessive resource usage as the endpoints process the requests. This can result in a denial of service. | ||||
| CVE-2024-10620 | 1 Knightliao | 1 Disconf | 2026-04-15 | 5.3 Medium |
| A vulnerability was found in knightliao Disconf 2.6.36. It has been classified as critical. This affects an unknown part of the file /api/config/list of the component Configuration Center. The manipulation leads to improper authentication. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. | ||||
| CVE-2024-21483 | 2026-04-15 | 4.6 Medium | ||
| A vulnerability has been identified in SENTRON 7KM PAC3120 AC/DC (7KM3120-0BA01-1DA0) (All versions >= V3.2.3 < V3.2.4 only when manufactured between LQN231003... and LQN231215... ( with LQNYYMMDD...)), SENTRON 7KM PAC3120 DC (7KM3120-1BA01-1EA0) (All versions >= V3.2.3 < V3.2.4 only when manufactured between LQN231003... and LQN231215... ( with LQNYYMMDD...)), SENTRON 7KM PAC3220 AC/DC (7KM3220-0BA01-1DA0) (All versions >= V3.2.3 < V3.2.4 only when manufactured between LQN231003... and LQN231215... ( with LQNYYMMDD...)), SENTRON 7KM PAC3220 DC (7KM3220-1BA01-1EA0) (All versions >= V3.2.3 < V3.2.4 only when manufactured between LQN231003... and LQN231215... ( with LQNYYMMDD...)). The read out protection of the internal flash of affected devices was not properly set at the end of the manufacturing process. An attacker with physical access to the device could read out the data. | ||||
| CVE-2022-37410 | 2026-04-15 | 7 High | ||
| Improper access control for some Intel(R) Thunderbolt driver software before version 89 may allow an authenticated user to potentially enable escalation of privilege via local access. | ||||
| CVE-2023-37057 | 1 Jlink | 1 Ax1800 | 2026-04-15 | 9.8 Critical |
| An issue in JLINK Unionman Technology Co. Ltd Jlink AX1800 v.1.0 allows a remote attacker to execute arbitrary code via the router's authentication mechanism. | ||||
| CVE-2025-1078 | 2026-04-15 | 5.3 Medium | ||
| A vulnerability has been found in AppHouseKitchen AlDente Charge Limiter up to 1.29 on macOS and classified as critical. This vulnerability affects the function shouldAcceptNewConnection of the file com.apphousekitchen.aldente-pro.helper of the component XPC Service. The manipulation leads to improper authorization. It is possible to launch the attack on the local host. The exploit has been disclosed to the public and may be used. Upgrading to version 1.30 is able to address this issue. It is recommended to upgrade the affected component. The vendor was contacted early about this disclosure and acted very professional. | ||||
| CVE-2025-56578 | 2026-04-15 | 5.7 Medium | ||
| An issue in RTSPtoWeb v.2.4.3 allows a remote attacker to obtain sensitive information and executearbitrary code via the lack of authentication mechanisms | ||||
| CVE-2025-10906 | 2 Apple, Magnetism Studios | 2 Macos, Endurance | 2026-04-15 | 8.4 High |
| A flaw has been found in Magnetism Studios Endurance up to 3.3.0 on macOS. This affects the function loadModuleNamed:WithReply of the file /Applications/Endurance.app/Contents/Library/LaunchServices/com.MagnetismStudios.endurance.helper of the component NSXPC Interface. Executing manipulation can lead to missing authentication. The attack needs to be launched locally. The exploit has been published and may be used. | ||||
| CVE-2025-64483 | 1 Wazuh | 2 Wazuh, Wazuh-dashboard | 2026-04-15 | N/A |
| Wazuh is a security detection, visibility, and compliance open source project. From version 4.9.0 to before 4.13.0, the Wazuh API – Agent Configuration in certain configurations allows authenticated users with read-only API roles to retrieve agent enrollment credentials through the /utils/configuration endpoint. These credentials can be used to register new agents within the same Wazuh tenant without requiring elevated permissions through the UI. This issue has been patched in version 4.13.0. | ||||
| CVE-2025-64513 | 1 Milvus | 1 Milvus | 2026-04-15 | N/A |
| Milvus is an open-source vector database built for generative AI applications. An unauthenticated attacker can exploit a vulnerability in versions prior to 2.4.24, 2.5.21, and 2.6.5 to bypass all authentication mechanisms in the Milvus Proxy component, gaining full administrative access to the Milvus cluster. This grants the attacker the ability to read, modify, or delete data, and to perform privileged administrative operations such as database or collection management. This issue has been fixed in Milvus 2.4.24, 2.5.21, and 2.6.5. If immediate upgrade is not possible, a temporary mitigation can be applied by removing the sourceID header from all incoming requests at the gateway, API gateway, or load balancer level before they reach the Milvus Proxy. This prevents attackers from exploiting the authentication bypass behavior. | ||||
| CVE-2025-64517 | 1 Sudo-rs | 1 Sudo-rs | 2026-04-15 | 4.4 Medium |
| sudo-rs is a memory safe implementation of sudo and su written in Rust. With `Defaults targetpw` (or `Defaults rootpw`) enabled, the password of the target account (or root account) instead of the invoking user is used for authentication. sudo-rs starting in version 0.2.5 and prior to version 0.2.10 incorrectly recorded the invoking user’s UID instead of the authenticated-as user's UID in the authentication timestamp. Any later `sudo` invocation on the same terminal while the timestamp was still valid would use that timestamp, potentially bypassing new authentication even if the policy would have required it. A highly-privileged user (able to run commands as other users, or as root, through sudo) who knows one password of an account they are allowed to run commands as, would be able to run commands as any other account the policy permits them to run commands for, even if they don't know the password for those accounts. A common instance of this would be that a user can still use their own password to run commands as root (the default behaviour of `sudo`), effectively negating the intended behaviour of the `targetpw` or `rootpw` options. Version 0.2.10 contains a patch for the issue. Versions prior to 0.2.5 are not affected, since they do not offer `Defaults targetpw` or `Defaults rootpw`. | ||||
| CVE-2025-1259 | 2026-04-15 | 7.7 High | ||
| On affected platforms running Arista EOS with OpenConfig configured, a gNOI request can be run when it should have been rejected. This issue can result in users retrieving data that should not have been available | ||||
| CVE-2024-9105 | 1 Tophive | 1 Ultimate Ai | 2026-04-15 | 9.8 Critical |
| The UltimateAI plugin for WordPress is vulnerable to authentication bypass in versions up to, and including, 2.8.3. This is due to insufficient verification on the user being supplied in the 'ultimate_ai_register_or_login_with_google' function. This makes it possible for unauthenticated attackers to log in as any existing user on the site, such as an administrator, if they have access to the email. | ||||
| CVE-2024-9106 | 1 Xunhuweb | 1 Wechat Social Login | 2026-04-15 | 9.8 Critical |
| The Wechat Social login plugin for WordPress is vulnerable to authentication bypass in versions up to, and including, 1.3.0. This is due to insufficient verification on the user being supplied during the social login. This makes it possible for unauthenticated attackers to log in as any existing user on the site, such as an administrator, if they have access to the user id. This is only exploitable if the app secret is not set, so it has a default empty value. | ||||
| CVE-2025-46573 | 1 Auth0 | 1 Passport-wsfed-saml2 | 2026-04-15 | N/A |
| passport-wsfed-saml2 provides passport strategy for both WS-fed and SAML2 protocol. A vulnerability present starting in version 3.0.5 up to and including version 4.6.3 allows an attacker to impersonate any user during SAML authentication by tampering with a valid SAML response. This can be done by adding attributes to the response. Users are affected specifically when the service provider is using `passport-wsfed-saml2` and a valid SAML Response signed by the Identity Provider can be obtained. Version 4.6.4 contains a fix for the vulnerability. | ||||
| CVE-2025-46572 | 1 Auth0 | 1 Passport-wsfed-saml2 | 2026-04-15 | N/A |
| passport-wsfed-saml2 provides passport strategy for both WS-fed and SAML2 protocol. A vulnerability present starting in version 3.0.5 up to and including version 4.6.3 allows an attacker to impersonate any user during SAML authentication by crafting a SAMLResponse. This can be done by using a valid SAML object that was signed by the configured IdP. Users are affected specifically when the service provider is using passport-wsfed-saml2 and a valid SAML document signed by the Identity Provider can be obtained. Version 4.6.4 contains a fix for the vulnerability. | ||||