Export limit exceeded: 410502 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 410502 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (410502 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-43063 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfs: don't irele after failing to iget in xfs_attri_recover_work xlog_recovery_iget* never set @ip to a valid pointer if they return an error, so this irele will walk off a dangling pointer. Fix that. | ||||
| CVE-2026-43060 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_ct: drop pending enqueued packets on removal Packets sitting in nfqueue might hold a reference to: - templates that specify the conntrack zone, because a percpu area is used and module removal is possible. - conntrack timeout policies and helper, where object removal leave a stale reference. Since these objects can just go away, drop enqueued packets to avoid stale reference to them. If there is a need for finer grain removal, this logic can be revisited to make selective packet drop upon dependencies. | ||||
| CVE-2026-43055 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: target: file: Use kzalloc_flex for aio_cmd The target_core_file doesn't initialize the aio_cmd->iocb for the ki_write_stream. When a write command fd_execute_rw_aio() is executed, we may get a bogus ki_write_stream value, causing unintended write failure status when checking iocb->ki_write_stream > max_write_streams in the block device. Let's just use kzalloc_flex when allocating the aio_cmd and let ki_write_stream=0 to fix this issue. | ||||
| CVE-2026-43048 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: core: Mitigate potential OOB by removing bogus memset() The memset() in hid_report_raw_event() has the good intention of clearing out bogus data by zeroing the area from the end of the incoming data string to the assumed end of the buffer. However, as we have previously seen, doing so can easily result in OOB reads and writes in the subsequent thread of execution. The current suggestion from one of the HID maintainers is to remove the memset() and simply return if the incoming event buffer size is not large enough to fill the associated report. Suggested-by Benjamin Tissoires <bentiss@kernel.org> [bentiss: changed the return value] | ||||
| CVE-2026-43047 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: multitouch: Check to ensure report responses match the request It is possible for a malicious (or clumsy) device to respond to a specific report's feature request using a completely different report ID. This can cause confusion in the HID core resulting in nasty side-effects such as OOB writes. Add a check to ensure that the report ID in the response, matches the one that was requested. If it doesn't, omit reporting the raw event and return early. | ||||
| CVE-2026-43042 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: mpls: add seqcount to protect the platform_label{,s} pair The RCU-protected codepaths (mpls_forward, mpls_dump_routes) can have an inconsistent view of platform_labels vs platform_label in case of a concurrent resize (resize_platform_label_table, under platform_mutex). This can lead to OOB accesses. This patch adds a seqcount, so that we get a consistent snapshot. Note that mpls_label_ok is also susceptible to this, so the check against RTA_DST in rtm_to_route_config, done outside platform_mutex, is not sufficient. This value gets passed to mpls_label_ok once more in both mpls_route_add and mpls_route_del, so there is no issue, but that additional check must not be removed. | ||||
| CVE-2026-43038 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: icmp: clear skb2->cb[] in ip6_err_gen_icmpv6_unreach() Sashiko AI-review observed: In ip6_err_gen_icmpv6_unreach(), the skb is an outer IPv4 ICMP error packet where its cb contains an IPv4 inet_skb_parm. When skb is cloned into skb2 and passed to icmp6_send(), it uses IP6CB(skb2). IP6CB interprets the IPv4 inet_skb_parm as an inet6_skb_parm. The cipso offset in inet_skb_parm.opt directly overlaps with dsthao in inet6_skb_parm at offset 18. If an attacker sends a forged ICMPv4 error with a CIPSO IP option, dsthao would be a non-zero offset. Inside icmp6_send(), mip6_addr_swap() is called and uses ipv6_find_tlv(skb, opt->dsthao, IPV6_TLV_HAO). This would scan the inner, attacker-controlled IPv6 packet starting at that offset, potentially returning a fake TLV without checking if the remaining packet length can hold the full 18-byte struct ipv6_destopt_hao. Could mip6_addr_swap() then perform a 16-byte swap that extends past the end of the packet data into skb_shared_info? Should the cb array also be cleared in ip6_err_gen_icmpv6_unreach() and ip6ip6_err() to prevent this? This patch implements the first suggestion. I am not sure if ip6ip6_err() needs to be changed. A separate patch would be better anyway. | ||||
| CVE-2026-43037 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ip6_tunnel: clear skb2->cb[] in ip4ip6_err() Oskar Kjos reported the following problem. ip4ip6_err() calls icmp_send() on a cloned skb whose cb[] was written by the IPv6 receive path as struct inet6_skb_parm. icmp_send() passes IPCB(skb2) to __ip_options_echo(), which interprets that cb[] region as struct inet_skb_parm (IPv4). The layouts differ: inet6_skb_parm.nhoff at offset 14 overlaps inet_skb_parm.opt.rr, producing a non-zero rr value. __ip_options_echo() then reads optlen from attacker-controlled packet data at sptr[rr+1] and copies that many bytes into dopt->__data, a fixed 40-byte stack buffer (IP_OPTIONS_DATA_FIXED_SIZE). To fix this we clear skb2->cb[], as suggested by Oskar Kjos. Also add minimal IPv4 header validation (version == 4, ihl >= 5). | ||||
| CVE-2026-43033 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: authencesn - Do not place hiseq at end of dst for out-of-place decryption When decrypting data that is not in-place (src != dst), there is no need to save the high-order sequence bits in dst as it could simply be re-copied from the source. However, the data to be hashed need to be rearranged accordingly. Thanks, | ||||
| CVE-2026-43030 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix regsafe() for pointers to packet In case rold->reg->range == BEYOND_PKT_END && rcur->reg->range == N regsafe() may return true which may lead to current state with valid packet range not being explored. Fix the bug. | ||||
| CVE-2026-43019 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_conn: fix potential UAF in set_cig_params_sync hci_conn lookup and field access must be covered by hdev lock in set_cig_params_sync, otherwise it's possible it is freed concurrently. Take hdev lock to prevent hci_conn from being deleted or modified concurrently. Just RCU lock is not suitable here, as we also want to avoid "tearing" in the configuration. | ||||
| CVE-2026-43009 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix incorrect pruning due to atomic fetch precision tracking When backtrack_insn encounters a BPF_STX instruction with BPF_ATOMIC and BPF_FETCH, the src register (or r0 for BPF_CMPXCHG) also acts as a destination, thus receiving the old value from the memory location. The current backtracking logic does not account for this. It treats atomic fetch operations the same as regular stores where the src register is only an input. This leads the backtrack_insn to fail to propagate precision to the stack location, which is then not marked as precise! Later, the verifier's path pruning can incorrectly consider two states equivalent when they differ in terms of stack state. Meaning, two branches can be treated as equivalent and thus get pruned when they should not be seen as such. Fix it as follows: Extend the BPF_LDX handling in backtrack_insn to also cover atomic fetch operations via is_atomic_fetch_insn() helper. When the fetch dst register is being tracked for precision, clear it, and propagate precision over to the stack slot. For non-stack memory, the precision walk stops at the atomic instruction, same as regular BPF_LDX. This covers all fetch variants. Before: 0: (b7) r1 = 8 ; R1=8 1: (7b) *(u64 *)(r10 -8) = r1 ; R1=8 R10=fp0 fp-8=8 2: (b7) r2 = 0 ; R2=0 3: (db) r2 = atomic64_fetch_add((u64 *)(r10 -8), r2) ; R2=8 R10=fp0 fp-8=mmmmmmmm 4: (bf) r3 = r10 ; R3=fp0 R10=fp0 5: (0f) r3 += r2 mark_precise: frame0: last_idx 5 first_idx 0 subseq_idx -1 mark_precise: frame0: regs=r2 stack= before 4: (bf) r3 = r10 mark_precise: frame0: regs=r2 stack= before 3: (db) r2 = atomic64_fetch_add((u64 *)(r10 -8), r2) mark_precise: frame0: regs=r2 stack= before 2: (b7) r2 = 0 6: R2=8 R3=fp8 6: (b7) r0 = 0 ; R0=0 7: (95) exit After: 0: (b7) r1 = 8 ; R1=8 1: (7b) *(u64 *)(r10 -8) = r1 ; R1=8 R10=fp0 fp-8=8 2: (b7) r2 = 0 ; R2=0 3: (db) r2 = atomic64_fetch_add((u64 *)(r10 -8), r2) ; R2=8 R10=fp0 fp-8=mmmmmmmm 4: (bf) r3 = r10 ; R3=fp0 R10=fp0 5: (0f) r3 += r2 mark_precise: frame0: last_idx 5 first_idx 0 subseq_idx -1 mark_precise: frame0: regs=r2 stack= before 4: (bf) r3 = r10 mark_precise: frame0: regs=r2 stack= before 3: (db) r2 = atomic64_fetch_add((u64 *)(r10 -8), r2) mark_precise: frame0: regs= stack=-8 before 2: (b7) r2 = 0 mark_precise: frame0: regs= stack=-8 before 1: (7b) *(u64 *)(r10 -8) = r1 mark_precise: frame0: regs=r1 stack= before 0: (b7) r1 = 8 6: R2=8 R3=fp8 6: (b7) r0 = 0 ; R0=0 7: (95) exit | ||||
| CVE-2026-31788 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: xen/privcmd: restrict usage in unprivileged domU The Xen privcmd driver allows to issue arbitrary hypercalls from user space processes. This is normally no problem, as access is usually limited to root and the hypervisor will deny any hypercalls affecting other domains. In case the guest is booted using secure boot, however, the privcmd driver would be enabling a root user process to modify e.g. kernel memory contents, thus breaking the secure boot feature. The only known case where an unprivileged domU is really needing to use the privcmd driver is the case when it is acting as the device model for another guest. In this case all hypercalls issued via the privcmd driver will target that other guest. Fortunately the privcmd driver can already be locked down to allow only hypercalls targeting a specific domain, but this mode can be activated from user land only today. The target domain can be obtained from Xenstore, so when not running in dom0 restrict the privcmd driver to that target domain from the beginning, resolving the potential problem of breaking secure boot. This is XSA-482 --- V2: - defer reading from Xenstore if Xenstore isn't ready yet (Jan Beulich) - wait in open() if target domain isn't known yet - issue message in case no target domain found (Jan Beulich) | ||||
| CVE-2026-31786 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Buffer overflow in drivers/xen/sys-hypervisor.c The build id returned by HYPERVISOR_xen_version(XENVER_build_id) is neither NUL terminated nor a string. The first causes a buffer overflow as sprintf in buildid_show will read and copy till it finds a NUL. 00000000 f4 91 51 f4 dd 38 9e 9d 65 47 52 eb 10 71 db 50 |..Q..8..eGR..q.P| 00000010 b9 a8 01 42 6f 2e 32 |...Bo.2| 00000017 So use a memcpy instead of sprintf to have the correct value: 00000000 f4 91 51 f4 dd 00 9e 9d 65 47 52 eb 10 71 db 50 |..Q.....eGR..q.P| 00000010 b9 a8 01 42 |...B| 00000014 (the above have a hack to embed a zero inside and check it's returned correctly). This is XSA-485 / CVE-2026-31786 | ||||
| CVE-2026-31774 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/net: fix slab-out-of-bounds read in io_bundle_nbufs() sqe->len is __u32 but gets stored into sr->len which is int. When userspace passes sqe->len values exceeding INT_MAX (e.g. 0xFFFFFFFF), sr->len overflows to a negative value. This negative value propagates through the bundle recv/send path: 1. io_recv(): sel.val = sr->len (ssize_t gets -1) 2. io_recv_buf_select(): arg.max_len = sel->val (size_t gets 0xFFFFFFFFFFFFFFFF) 3. io_ring_buffers_peek(): buf->len is not clamped because max_len is astronomically large 4. iov[].iov_len = 0xFFFFFFFF flows into io_bundle_nbufs() 5. io_bundle_nbufs(): min_t(int, 0xFFFFFFFF, ret) yields -1, causing ret to increase instead of decrease, creating an infinite loop that reads past the allocated iov[] array This results in a slab-out-of-bounds read in io_bundle_nbufs() from the kmalloc-64 slab, as nbufs increments past the allocated iovec entries. BUG: KASAN: slab-out-of-bounds in io_bundle_nbufs+0x128/0x160 Read of size 8 at addr ffff888100ae05c8 by task exp/145 Call Trace: io_bundle_nbufs+0x128/0x160 io_recv_finish+0x117/0xe20 io_recv+0x2db/0x1160 Fix this by rejecting negative sr->len values early in both io_sendmsg_prep() and io_recvmsg_prep(). Since sqe->len is __u32, any value > INT_MAX indicates overflow and is not a valid length. | ||||
| CVE-2026-31773 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: SMP: derive legacy responder STK authentication from MITM state The legacy responder path in smp_random() currently labels the stored STK as authenticated whenever pending_sec_level is BT_SECURITY_HIGH. That reflects what the local service requested, not what the pairing flow actually achieved. For Just Works/Confirm legacy pairing, SMP_FLAG_MITM_AUTH stays clear and the resulting STK should remain unauthenticated even if the local side requested HIGH security. Use the established MITM state when storing the responder STK so the key metadata matches the pairing result. This also keeps the legacy path aligned with the Secure Connections code, which already treats JUST_WORKS/JUST_CFM as unauthenticated. | ||||
| CVE-2026-31772 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: fix stack buffer overflow in hci_le_big_create_sync hci_le_big_create_sync() uses DEFINE_FLEX to allocate a struct hci_cp_le_big_create_sync on the stack with room for 0x11 (17) BIS entries. However, conn->num_bis can hold up to HCI_MAX_ISO_BIS (31) entries — validated against ISO_MAX_NUM_BIS (0x1f) in the caller hci_conn_big_create_sync(). When conn->num_bis is between 18 and 31, the memcpy that copies conn->bis into cp->bis writes up to 14 bytes past the stack buffer, corrupting adjacent stack memory. This is trivially reproducible: binding an ISO socket with bc_num_bis = ISO_MAX_NUM_BIS (31) and calling listen() will eventually trigger hci_le_big_create_sync() from the HCI command sync worker, causing a KASAN-detectable stack-out-of-bounds write: BUG: KASAN: stack-out-of-bounds in hci_le_big_create_sync+0x256/0x3b0 Write of size 31 at addr ffffc90000487b48 by task kworker/u9:0/71 Fix this by changing the DEFINE_FLEX count from the incorrect 0x11 to HCI_MAX_ISO_BIS, which matches the maximum number of BIS entries that conn->bis can actually carry. | ||||
| CVE-2026-31771 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_event: move wake reason storage into validated event handlers hci_store_wake_reason() is called from hci_event_packet() immediately after stripping the HCI event header but before hci_event_func() enforces the per-event minimum payload length from hci_ev_table. This means a short HCI event frame can reach bacpy() before any bounds check runs. Rather than duplicating skb parsing and per-event length checks inside hci_store_wake_reason(), move wake-address storage into the individual event handlers after their existing event-length validation has succeeded. Convert hci_store_wake_reason() into a small helper that only stores an already-validated bdaddr while the caller holds hci_dev_lock(). Use the same helper after hci_event_func() with a NULL address to preserve the existing unexpected-wake fallback semantics when no validated event handler records a wake address. Annotate the helper with __must_hold(&hdev->lock) and add lockdep_assert_held(&hdev->lock) so future call paths keep the lock contract explicit. Call the helper from hci_conn_request_evt(), hci_conn_complete_evt(), hci_sync_conn_complete_evt(), le_conn_complete_evt(), hci_le_adv_report_evt(), hci_le_ext_adv_report_evt(), hci_le_direct_adv_report_evt(), hci_le_pa_sync_established_evt(), and hci_le_past_received_evt(). | ||||
| CVE-2026-31739 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: tegra - Add missing CRYPTO_ALG_ASYNC The tegra crypto driver failed to set the CRYPTO_ALG_ASYNC on its asynchronous algorithms, causing the crypto API to select them for users that request only synchronous algorithms. This causes crashes (at least). Fix this by adding the flag like what the other drivers do. Also remove the unnecessary CRYPTO_ALG_TYPE_* flags, since those just get ignored and overridden by the registration function anyway. | ||||
| CVE-2026-31731 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: thermal: core: Address thermal zone removal races with resume Since thermal_zone_pm_complete() and thermal_zone_device_resume() re-initialize the poll_queue delayed work for the given thermal zone, the cancel_delayed_work_sync() in thermal_zone_device_unregister() may miss some already running work items and the thermal zone may be freed prematurely [1]. There are two failing scenarios that both start with running thermal_pm_notify_complete() right before invoking thermal_zone_device_unregister() for one of the thermal zones. In the first scenario, there is a work item already running for the given thermal zone when thermal_pm_notify_complete() calls thermal_zone_pm_complete() for that thermal zone and it continues to run when thermal_zone_device_unregister() starts. Since the poll_queue delayed work has been re-initialized by thermal_pm_notify_complete(), the running work item will be missed by the cancel_delayed_work_sync() in thermal_zone_device_unregister() and if it continues to run past the freeing of the thermal zone object, a use-after-free will occur. In the second scenario, thermal_zone_device_resume() queued up by thermal_pm_notify_complete() runs right after the thermal_zone_exit() called by thermal_zone_device_unregister() has returned. The poll_queue delayed work is re-initialized by it before cancel_delayed_work_sync() is called by thermal_zone_device_unregister(), so it may continue to run after the freeing of the thermal zone object, which also leads to a use-after-free. Address the first failing scenario by ensuring that no thermal work items will be running when thermal_pm_notify_complete() is called. For this purpose, first move the cancel_delayed_work() call from thermal_zone_pm_complete() to thermal_zone_pm_prepare() to prevent new work from entering the workqueue going forward. Next, switch over to using a dedicated workqueue for thermal events and update the code in thermal_pm_notify() to flush that workqueue after thermal_pm_notify_prepare() has returned which will take care of all leftover thermal work already on the workqueue (that leftover work would do nothing useful anyway because all of the thermal zones have been flagged as suspended). The second failing scenario is addressed by adding a tz->state check to thermal_zone_device_resume() to prevent it from re-initializing the poll_queue delayed work if the thermal zone is going away. Note that the above changes will also facilitate relocating the suspend and resume of thermal zones closer to the suspend and resume of devices, respectively. | ||||