Export limit exceeded: 106517 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (106517 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-89520 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: sched/core: Make core-sched flips wait for in-flight selections Core scheduling's pick_next_task() operates on all sibling rqs under one acquisition of the shared core-wide lock. A ->pick_task() that releases the rq lock leaves every sibling __lock momentarily free, letting __sched_core_flip(false) complete mid-selection and rebind rq_lockp() under it. The selection resumes on the split locks, touching sibling state it no longer protects, and __schedule() finally releases a lock that was never taken while leaking the one that was. Count in-flight core-wide selections in the leader's rq->core_pick_in_flight and make __sched_core_flip() wait for the count to drain. The count only changes under the shared lock, which the flip holds while sampling, so no other ordering is needed. The wait can repeat while selections overlap, but the flip backs off between samples and flips are rare cookie-lifetime events. sched_core_cpu_deactivate() moves the count to the new leader - a stale copy left behind would bias it forever if that CPU later returns as its own leader. | ||||
| CVE-2026-89472 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: power: supply: charger-manager: register regulators before exposing sysfs charger_manager_remove() and the err_reg_extcon probe error path free each charger regulator with regulator_put() before tearing down the power_supply sysfs entries (power_supply_unregister()). charger_manager_remove() also calls try_charger_enable(cm, false) after the regulator_put() loop. A concurrent write to a charger's externally_control sysfs attribute that lands between regulator_put() and power_supply_unregister() can run charger_externally_control_store() and call try_charger_enable(), which, when charging is enabled, dereferences the already-freed consumer handle. When charging is enabled, try_charger_enable(cm, false) in .remove() also dereferences the freed handles directly. Both leave use-after-free windows. Symmetrically, probe registers the sysfs entries (power_supply_register) before acquiring the regulators (regulator_get, inside charger_manager_register_extcon), so userspace can reach externally_control before the regulators are available. Split charger_manager_register_extcon() on the sync/async boundary: charger_manager_get_regulators() (regulator_get only, no async producer) now runs before power_supply_register() so sysfs is not live before regulators are available, and charger_manager_register_extcon() keeps only the extcon notifier/work setup, still after power_supply_register() so a power_supply_register() failure cannot reach extcon setup. This keeps the sysfs setup/teardown ordering symmetric without introducing an asynchronous producer on the earlier probe-error path. Move power_supply_unregister() and try_charger_enable(cm, false) ahead of the regulator_put() loop on both teardown paths, and adjust err_reg_extcon (power_supply_unregister() then fall through err_regulator for regulator_put(); get_regulators self-rolls back on its own failure). This does not address the separate extcon-notifier-driven deref of the same handles, which needs its own synchronization design. Found by an in-house static analysis tool. | ||||
| CVE-2026-89452 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/msm: Unwind probe state on registration failure msm_iommu_probe() adds its devm-managed IOMMU object to qcom_iommu_devices before adding the IOMMU sysfs device and registering it with the IOMMU core. If iommu_device_sysfs_add() fails, probe returns with the object still on qcom_iommu_devices. The driver core then releases the devm allocation, leaving a dangling list entry that later list walks may dereference. If iommu_device_register() fails, the same dangling list entry remains and the sysfs device is left registered as well. Unwind the sysfs device and global list entry in reverse setup order on the corresponding failure paths. | ||||
| CVE-2026-89441 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mmc: via-sdmmc: cancel card-detect work on remove Disabling the device interrupt and freeing the IRQ prevents new card-detect work from being queued, but carddet_work already queued by the handler can still run after via_sd_remove() returns. via_sdc_card_detect() recovers the host through container_of() and dereferences its MMIO base; once remove() returns the host can be freed, so that work would touch freed memory. Cancel carddet_work after freeing the IRQ and before cancelling finish_bh_work, which the card-detect handler can also queue. carddet_work can re-enable the interrupt through via_reset_pcictrl(); mask it again afterwards. This issue was found by an in-house static analysis tool and confirmed by manual code review. | ||||
| CVE-2026-81016 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.7 High |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86/amd/pmc: Propagate SMU errors and validate S2D address amd_stb_s2d_init() discards the return value of several S2D SMU commands. When the SMU refuses a command (e.g. "SMU cmd failed. err: 0xff") the failure is only noticed indirectly - if at all - and reported as -EIO, masking the real error. More seriously, the S2D_PHYS_ADDR_LOW/HIGH return values are ignored, so on failure phys_addr_low/hi are left uninitialised and the assembled address is passed straight to devm_ioremap(). When the SMU leaves them at zero this maps physical address 0 and trips the ioremap-on-RAM warning: amd_pmc AMDI000B:00: SMU cmd failed. err: 0xff ioremap on RAM at 0x0000000000000000 - 0x0000000000ffffff WARNING: CPU: 13 PID: 4592 at arch/x86/mm/ioremap.c:... Check the return value of each SMU command and propagate it, and reject a zero physical address before calling devm_ioremap(). | ||||
| CVE-2026-80991 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: ravb: serialize PTP clock teardown ravb_ptp_interrupt() can race with ravb_ptp_stop() and pass the clock to ptp_clock_event() while ptp_clock_unregister() is freeing it. This can lead to a use-after-free. Use READ_ONCE() and WRITE_ONCE() for lockless access to the clock pointer. Atomically detach it with xchg() before disabling PTP interrupts, then synchronize all IRQs which can invoke ravb_ptp_interrupt() before unregistering the detached clock. A handler which read the old pointer completes before the clock is unregistered, while later handlers read NULL and skip the event. | ||||
| CVE-2026-80947 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtl8xxxu: fix use-after-free from rx_urb_wq on stop rtl8xxxu arms rx_urb_wq from the RX completion path: rtl8xxxu_rx_complete() hands the URB to rtl8xxxu_queue_rx_urb(), which queues it on rx_urb_pending_list and, once the list grows past RTL8XXXU_RX_URB_PENDING_WATER, schedules rx_urb_wq. The worker rtl8xxxu_rx_urb_work() drains rx_urb_pending_list, recovers priv through container_of, and resubmits each URB through rtl8xxxu_submit_rx_urb(), which anchors it on rx_anchor and dereferences priv->udev. rtl8xxxu_stop() cancels the sibling work items (c2hcmd_work, ra_watchdog, update_beacon_work) but never cancels rx_urb_wq, so a worker armed during the last burst of RX traffic can run rtl8xxxu_rx_urb_work() after rtl8xxxu_disconnect() has called ieee80211_free_hw(), which frees priv, producing a use-after-free. The window opens under active RX traffic (pending count above the watermark) followed by a disconnect. There are two teardown races to close: * rtl8xxxu_queue_rx_urb() decided whether to enqueue under rx_urb_lock but called schedule_work() after dropping the lock. A completion that observed shutdown == false and released the lock could then call schedule_work() after rtl8xxxu_stop() had set shutdown and cancel_work_sync() had already returned, arming the worker to run after the teardown. Move schedule_work() under the same !shutdown branch so the arming decision is atomic with the shutdown check. * rtl8xxxu_rx_urb_work() anchors every URB it drained back onto rx_anchor through rtl8xxxu_submit_rx_urb(). A worker still running when usb_kill_anchored_urbs(&priv->rx_anchor) returned would submit a URB that escaped the kill. In rtl8xxxu_stop(), call cancel_work_sync(&priv->rx_urb_wq) before the kill so the worker is drained first. After priv->shutdown is set under rx_urb_lock, completions can no longer queue rx_urb_wq. cancel_work_sync() then drains the last queued or running worker, and the following usb_kill_anchored_urbs() kills the URBs it may have submitted. rtl8xxxu_disconnect() is covered because ieee80211_unregister_hw() guarantees .stop() runs for a live interface before ieee80211_free_hw() frees priv. The probe error path needs no cancel: rx_urb_wq is INIT_WORK()'d there but cannot have been scheduled, since no URB is submitted before ieee80211_register_hw() succeeds. This bug was found by static analysis. | ||||
| CVE-2026-80937 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7915: bound the device EEPROM address before the EFUSE copy mt7915_mcu_get_eeprom() copies a fixed EFUSE block into the driver's dev->mt76.eeprom.data buffer at the offset reported by the MCU response (res->addr, a device-controlled __le32) without checking it against the buffer size. A malicious or malfunctioning device can report an arbitrary address and drive a 16-byte out-of-bounds write past eeprom.data. Reject a response whose address would place the copy outside eeprom.data before deriving the destination pointer. Devices that echo the requested in-bounds offset are unaffected. | ||||
| CVE-2026-80935 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: bound the device EEPROM address before the EFUSE copy mt7996_mcu_get_eeprom() derives the destination of the EFUSE/EXT block copy from the address reported by the MCU response (event->addr, a device-controlled __le32) and clamps only the copy length, never the destination offset into dev->mt76.eeprom.data. A malicious or malfunctioning device can report an arbitrary address and drive an out-of-bounds write of up to MT7996_EXT_EEPROM_BLOCK_SIZE bytes past eeprom.data. Reject a response whose address would place the copy outside eeprom.data before deriving the destination pointer. Devices that echo the requested in-bounds offset are unaffected. | ||||
| CVE-2026-91563 | 1 Oracle | 1 Olap | 2026-10-21 | 8.8 High |
| Vulnerability in the Oracle OLAP component of Oracle Database Server. Supported versions that are affected are 19.3-19.32, 21.3-21.23 and 23.4.0-23.26.3. Easily exploitable vulnerability allows low privileged attacker having DBMS_AW privilege with network access via Oracle Net to compromise Oracle OLAP. Successful attacks of this vulnerability can result in takeover of Oracle OLAP. CVSS 3.1 Base Score 8.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H). | ||||
| CVE-2026-91573 | 1 Oracle | 1 Agile Product Lifecycle Management For Process | 2026-10-21 | 8.2 High |
| Vulnerability in the Oracle Agile Product Lifecycle Management for Process product of Oracle Supply Chain (component: Product Quality Management). The supported version that is affected is 6.2.4. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Agile Product Lifecycle Management for Process. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle Agile Product Lifecycle Management for Process accessible data as well as unauthorized update, insert or delete access to some of Oracle Agile Product Lifecycle Management for Process accessible data. CVSS 3.1 Base Score 8.2 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:L/A:N). | ||||
| CVE-2026-91659 | 1 Oracle | 1 Essbase | 2026-10-21 | 7.7 High |
| Vulnerability in Oracle Essbase (component: Build). The supported version that is affected is 21.8.3.0.0. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Essbase. While the vulnerability is in Oracle Essbase, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle Essbase accessible data. CVSS 3.1 Base Score 7.7 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:C/C:H/I:N/A:N). | ||||
| CVE-2026-91668 | 1 Oracle | 1 Data Integrator | 2026-10-21 | 8.8 High |
| Vulnerability in the Oracle Data Integrator product of Oracle Fusion Middleware (component: Dictionary Repository). Supported versions that are affected are 12.2.1.4.0 and 14.1.2.0.0. Easily exploitable vulnerability allows low privileged attacker with network access via SQL to compromise Oracle Data Integrator. Successful attacks of this vulnerability can result in takeover of Oracle Data Integrator. CVSS 3.1 Base Score 8.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H). | ||||
| CVE-2026-80747 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Add bounds check for CRAT subtype length The CRAT parser validates that the subtype header fits within the image, but does not verify that the advertised subtype length fits. A malformed CRAT table with an oversized length field causes out-of-bounds reads when kfd_parse_subtype() casts the header to specific subtype structures. Add validation that sub_type_hdr + length does not exceed the image boundary before parsing the subtype contents. (cherry picked from commit 48e1d1e6e8798aef0312e68d8e586021b5b3cf4d) | ||||
| CVE-2026-80738 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Check sk_state before sk_protocol in bpf_tcp_*_syncookie bpf_tcp_gen_syncookie and bpf_tcp_check_syncookie accept a socket pointer 'sk' with argument type ARG_PTR_TO_BTF_ID_SOCK_COMMON. However, they access sk->sk_protocol without validating whether 'sk' represents a full socket. Fix this issue by checking sk->sk_state != TCP_LISTEN before inspecting sk->sk_protocol in both bpf_tcp_gen_syncookie and bpf_tcp_check_syncookie. Since mini-sockets are never in the TCP_LISTEN state, the condition short-circuits and prevents dereferencing fullsock-specific fields. | ||||
| CVE-2026-80734 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: initialize inode mapping flags for cached inodes [BUG] When running generic/795 with 8K block size, 4K page size, the test always fails, triggering some ASSERT()s related to folio size: 795 (241074): drop_caches: 3 assertion failed: IS_ALIGNED(start, blocksize) && IS_ALIGNED(end + 1, blocksize), in extent_io.c:1404 (blocksize=8192 root=262 ino=258 start=16826368 end=16830463 mapping min order=0) ------------[ cut here ]------------ kernel BUG at extent_io.c:1404! Oops: invalid opcode: 0000 [#1] SMP CPU: 8 UID: 0 PID: 241105 Comm: fsstress Tainted: G OE 7.2.0-rc5-custom+ #442 PREEMPT(full) f4bfb352566f3949f29c233ce6f735050a03b245 Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022 RIP: 0010:assert_folio_range.cold+0x3d/0x3f [btrfs] Call Trace: <TASK> btrfs_read_folio+0x9e/0x170 [btrfs 4cd1dd93b341b8ef766643f9512f4a86259567a3] prepare_one_folio.constprop.0+0x104/0x2a0 [btrfs 4cd1dd93b341b8ef766643f9512f4a86259567a3] btrfs_buffered_write+0x285/0xa50 [btrfs 4cd1dd93b341b8ef766643f9512f4a86259567a3] btrfs_do_write_iter+0x1aa/0x210 [btrfs 4cd1dd93b341b8ef766643f9512f4a86259567a3] iter_file_splice_write+0x31a/0x540 direct_splice_actor+0x53/0x170 splice_direct_to_actor+0xe9/0x240 do_splice_direct+0x76/0xb0 vfs_copy_file_range+0x1fd/0x630 __x64_sys_copy_file_range+0xf9/0x220 do_syscall_64+0xe1/0x790 entry_SYSCALL_64_after_hwframe+0x4b/0x53 </TASK> ---[ end trace 0000000000000000 ]--- The ASSERT() itself is added by a later patch. The crash is triggered with that new debug patch, and without this fix. [CAUSE] In the above case, the start 16826368 is properly 8K aligned, but the end (16830463 + 1) is not 8K aligned. Furthermore the mapping's minimal folio order is 0, not the expected 1 for 8K block size with 4K page size. So this means some inodes do not have btrfs_set_inode_mapping_order() called on it. The missing btrfs_set_inode_mapping_order() call happens for cached inodes, through the following events: - btrfs_create_new_inode() called for inode X Which properly sets minimal folio order for the VFS inode. - btrfs_update_inode() called for inode X Which calls btrfs_delayed_update_inode() to create a delayed_node into root->delayed_nodes xarray. - Drop cache/memory pressure, evicting in-memory inode X Which evicted the inode X, but delayed_node is still in root->delayed_nodes for future reuse. - btrfs_iget() for inode X called again btrfs_iget() |- btrfs_iget_locked() | |- iget5_locked_rcu() | Which creates a new vfs_inode for btrfs, whose mapping still | has the minimal order as 0. | |- btrfs_read_locked_inode() |- btrfs_fill_inode() | |- btrfs_get_delayed_node() | Which found out the previous node, and use that delayed | node to initialize the new inode. | |- filled = true; |- if (filled) goto cache_index; Which skips the btrfs_update_inode_mapping_flags() and btrfs_set_inode_mapping_order() calls. So the inode still has minimal folio order set as 0, not the required 1. Thus later page cache read will get a folio whose size is smaller than block size, as the mapping has its minimal folio order set as 0 not 1, then trigger the ASSERT(). [FIX] Move the btrfs_update_inode_mapping_flags() and btrfs_set_inode_mapping_order() calls under cache_index label, so that the mapping flags and minimal folio order is always set no matter if we have a cached inode. | ||||
| CVE-2026-80698 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: fix double free of wq, engine, and group structs The release callbacks for wq, engine, and group devices (idxd_conf_wq_release, idxd_conf_engine_release, idxd_conf_group_release) each call kfree() on the enclosing struct. The setup error paths and cleanup functions also call kfree() explicitly after put_device(), producing a double free whenever put_device() drops the reference count to zero and fires the release. In the setup functions, device_initialize() is called before device_add(), so the reference count is exactly 1 at the error sites. put_device() unconditionally fires the release, which frees the struct; the subsequent explicit kfree() then operates on freed memory. For idxd_setup_wqs(), the wq release callback also owns opcap_bmap and wqcfg. The error unwind additionally freed those fields explicitly before calling put_device(), causing further double frees on both. Remove the redundant explicit kfree() calls from all setup error paths and cleanup functions for wq, engine, and group structs, delegating sole ownership of those allocations to the release callbacks. | ||||
| CVE-2026-80692 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: hold conn in hci_connect_acl/le_sync() callbacks There is theoretical UAF if the conn is freed while the hci_sync task is running. Hold refcount to avoid that. | ||||
| CVE-2026-80662 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: cxl: Fix CXL_HEADERLOG_SIZE to match RAS Capability size The CXL r4.0 8.2.4.17.7 RAS Capability Structure has total length 0x58 bytes (CXL_RAS_CAPABILITY_LENGTH); the Header Log occupies the trailing 64 bytes at offset 0x18. CXL_HEADERLOG_SIZE was defined as SZ_512, eight times the actual on-device size. header_log_copy() reads CXL_HEADERLOG_SIZE_U32 (128) dwords from the RAS capability iomap, overrunning the 88-byte mapping by 448 bytes. The cxl_aer_uncorrectable_error trace event memcpy()s CXL_HEADERLOG_SIZE (512) bytes from its source. For the CPER caller the source is struct cxl_ras_capability_regs::header_log[16] (64 bytes) embedded in a stack-local cxl_cper_prot_err_work_data, so the memcpy reads 448 bytes of kernel stack into the trace event ring buffer where userspace can read it via tracefs. Set CXL_HEADERLOG_SIZE to 64 and derive CXL_HEADERLOG_SIZE_U32 from it, bringing all iomap readers into agreement on 16 dwords. Userspace tools such as rasdaemon have grown a dependency on the buggy 512-byte (128 u32) header_log layout in the cxl_aer_uncorrectable_error trace event. Add CXL_HEADERLOG_TRACE_SIZE_U32 = 128 and use it for the trace event __array and its memcpy to preserve that ABI. Both callers now pass a zero-filled u32[CXL_HEADERLOG_TRACE_SIZE_U32] staging buffer with only the first CXL_HEADERLOG_SIZE_U32 (16) entries populated from hardware; the remaining 112 u32s are zero-padded, keeping the 512-byte trace ring buffer layout intact. [ dj: Replaced 64 with SZ_64 per RichardC ] | ||||
| CVE-2026-80653 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: hisi_sas: Add slave_destroy interface for v3 hw WARNING is triggered when executing link reset of remote PHY and rmmod SAS driver simultaneously. Following is the WARNING log: WARNING: CPU: 61 PID: 21818 at drivers/base/core.c:1347 __device_links_no_driver+0xb4/0xc0 Call trace: __device_links_no_driver+0xb4/0xc0 device_links_driver_cleanup+0xb0/0xfc __device_release_driver+0x198/0x23c device_release_driver+0x38/0x50 bus_remove_device+0x130/0x140 device_del+0x184/0x434 __scsi_remove_device+0x118/0x150 scsi_remove_target+0x1bc/0x240 sas_rphy_remove+0x90/0x94 sas_rphy_delete+0x24/0x3c sas_destruct_devices+0x64/0xa0 [libsas] sas_revalidate_domain+0xe4/0x150 [libsas] process_one_work+0x1e0/0x46c worker_thread+0x15c/0x464 kthread+0x160/0x170 ret_from_fork+0x10/0x20 ---[ end trace 71e059eb58f85d4a ]--- During SAS phy up, link->status is set to DL_STATE_AVAILABLE in device_links_driver_bound, then this setting influences __device_links_no_driver() before driver rmmod and caused WARNING. Add the slave_destroy interface to make sure link is removed after flush workque. | ||||