Export limit exceeded: 28613 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (28613 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-13589 | 1 Seladb | 1 Pcapplusplus | 2026-06-29 | 5.6 Medium |
| A vulnerability was identified in seladb PcapPlusPlus 25.05. This affects the function pcpp::TelnetLayer::getSubCommand of the file Packet++/src/TelnetLayer.cpp of the component Telnet Subnegotiation Packet Handler. The manipulation leads to heap-based buffer overflow. The attack can be initiated remotely. The complexity of an attack is rather high. The exploitability is reported as difficult. The exploit is publicly available and might be used. The identifier of the patch is 98e671010bc7c87b95898c22ae289220ae92542b. It is recommended to apply a patch to fix this issue. | ||||
| CVE-2026-13582 | 1 Edimax | 1 Ew-7478apc | 2026-06-29 | 8.8 High |
| A flaw has been found in Edimax EW-7478APC 1.04. This issue affects the function formUSBAccount of the file /goform/formUSBAccount of the component POST Request Handler. This manipulation of the argument UserName/Password causes buffer overflow. The attack is possible to be carried out remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-13580 | 1 Edimax | 1 Ew-7478apc | 2026-06-29 | 8.8 High |
| A security vulnerability has been detected in Edimax EW-7478APC 1.04. This affects the function formQoS of the file /goform/formQoS of the component POST Request Handler. The manipulation of the argument selSSID leads to buffer overflow. Remote exploitation of the attack is possible. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-53303 | 1 Linux | 1 Linux Kernel | 2026-06-29 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: protect extension_list reading with sb_lock in f2fs_sbi_show() In f2fs_sbi_show(), the extension_list, extension_count and hot_ext_count are read without holding sbi->sb_lock. If a concurrent sysfs store modifies the extension list via f2fs_update_extension_list(), the show path may read inconsistent count and array contents, potentially leading to out-of-bounds access or displaying stale data. Fix this by holding sb_lock around the entire extension list read and format operation. | ||||
| CVE-2026-58058 | 1 Nmap | 1 Nmap | 2026-06-29 | 6.5 Medium |
| Nmap through 7.99 does not keep the IPv6 extension-header walk within the captured packet in ipv6_get_data_primitive (libnetutil/netutil.cc), so the pointer advances past the buffer and the remaining-length computation underflows to a large value. A scanned target or on-path attacker returning a crafted IPv6 response with a truncated extension header can trigger out-of-bounds reads and a crash during raw IPv6 scans. | ||||
| CVE-2026-13515 | 1 Tenda | 1 Jd12l | 2026-06-29 | 8.8 High |
| A security vulnerability has been detected in Tenda JD12L 16.03.53.23. Impacted is the function formSetPPTPServer of the file /goform/SetPptpServerCfg. Such manipulation of the argument startIp leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed publicly and may be used. | ||||
| CVE-2026-13539 | 1 Wavlink | 1 Wl-nu516u1-a | 2026-06-29 | 8.8 High |
| A vulnerability was identified in Wavlink WL-NU516U1-A M16U1_V240425. The impacted element is the function sub_407504 of the file /cgi-bin/wireless.cgi of the component POST Parameter Handler. Such manipulation of the argument Guest_ssid leads to stack-based buffer overflow. The attack can be executed remotely. The exploit is publicly available and might be used. It is suggested to upgrade the affected component. The vendor was contacted early, responded in a very professional manner and quickly released a fixed version of the affected product. | ||||
| CVE-2026-13563 | 1 Edimax | 1 Ew-7478apc | 2026-06-29 | 8.8 High |
| A vulnerability has been found in Edimax EW-7478APC 1.04. This impacts the function formL2TPSetup of the file /goform/formL2TPSetup of the component POST Request Handler. Such manipulation of the argument L2TPUserName leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-53282 | 1 Linux | 1 Linux Kernel | 2026-06-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86/kexec: Push kjump return address even for non-kjump kexec The version of purgatory code shipped by kexec-tools attempts to look above the top of its stack to find a return address for a kjump, even in a non-kjump kexec. After the commit in Fixes: the word above the stack might not be there, leading to a fault (which is at least now caught by my exception-handling code in kexec). That commit fixed things for the actual kjump path, but no longer "gratuitously" pushes the unused return address to the stack in the non-kjump path. Put that *back* in the non-kjump path, to prevent purgatory from crashing when trying to access it. | ||||
| CVE-2026-13564 | 1 Edimax | 1 Ew-7478apc | 2026-06-29 | 8.8 High |
| A vulnerability was found in Edimax EW-7478APC 1.04. Affected is the function formPPPoESetup of the file /goform/formPPPoESetup of the component POST Request Handler. Performing a manipulation of the argument pppUserName results in stack-based buffer overflow. The attack can be initiated remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-13516 | 1 Tenda | 1 Jd12l | 2026-06-29 | 8.8 High |
| A vulnerability was detected in Tenda JD12L 16.03.53.23. The affected element is the function fromSetWifiGusetBasic of the file /goform/WifiGuestSet. Performing a manipulation of the argument shareSpeed results in stack-based buffer overflow. The attack may be initiated remotely. The exploit is now public and may be used. | ||||
| CVE-2026-13522 | 1 Investintech | 1 Slimpdfreader | 2026-06-29 | 4.3 Medium |
| A security flaw has been discovered in Investintech SlimPDFReader up to 2.0.14. Affected by this issue is the function SlimPDFReader!Investintech::PCV::TeighaDo+0x25cde0 of the file SlimPDFReader.exe of the component PDF File Handler. Performing a manipulation results in out-of-bounds read. It is possible to initiate the attack remotely. This vulnerability only affects products that are no longer supported by the maintainer. | ||||
| CVE-2026-9267 | 1 Eclipse | 1 Tinydtls | 2026-06-29 | N/A |
| Eclipse tinydtls before commit b3efd41ad111a4920f599f51ffa4f5e9f1e72221 contains an out-of-bounds read vulnerability in the check_server_certificate() function that allows unauthenticated attackers to trigger reads beyond valid buffer boundaries by crafting a Certificate handshake message with a specific fragment_length value. Attackers can exploit missing buffer length validation before uint24 reads, memcmp, and memcpy operations during DTLS epoch 0 on both client and server paths to cause denial of service on memory-constrained devices. | ||||
| CVE-2026-45258 | 1 Freebsd | 1 Freebsd | 2026-06-29 | 7.8 High |
| dsp_mmap_single() validated the requested mapping by checking the sum of the user-supplied offset and length against the buffer size. This addition could overflow, so that a large offset and length wrapped around and passed the check. The offset was then narrowed from 64 to 32 bits when converted to a buffer address, yielding a mapping that extended past the audio buffer into unrelated kernel memory. The /dev/dsp device nodes are world-accessible by default. On a system with an audio device, either issue allows an unprivileged local user to read and write kernel memory, which can be used to escalate privileges, potentially gaining full control of the affected system. At a minimum, an attacker can crash the kernel, resulting in a Denial of Service (DoS). | ||||
| CVE-2026-13517 | 1 Tenda | 1 Jd12l | 2026-06-29 | 8.8 High |
| A flaw has been found in Tenda JD12L 16.03.53.23. The impacted element is the function formWifiBasicSet of the file /goform/WifiBasicSet. Executing a manipulation of the argument security_5g can lead to stack-based buffer overflow. The attack may be launched remotely. The exploit has been published and may be used. | ||||
| CVE-2026-13519 | 1 Tenda | 1 Jd12l | 2026-06-29 | 8.8 High |
| A vulnerability was found in Tenda JD12L 16.03.53.23. This impacts the function fromNatStaticSetting of the file /goform/NatStaticSetting. The manipulation of the argument page results in stack-based buffer overflow. The attack can be executed remotely. The exploit has been made public and could be used. | ||||
| CVE-2026-53203 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Add buffer overflow check in MS get_info_ioctl Add validation that the info size returned from the metric stream info query is not exceeded when checked against the allocated buffer size. If the firmware returns a size larger than the buffer, reject the operation with -EOVERFLOW instead of proceeding with an incorrect buffer copy. | ||||
| CVE-2026-53172 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: accel/ethosu: fix IFM region index out-of-bounds in command stream parser NPU_SET_IFM_REGION extracts the region index with param & 0x7f, giving a maximum value of 127. However region_size[] and output_region[] in struct ethosu_validated_cmdstream_info are both sized to NPU_BASEP_REGION_MAX (8), giving valid indices [0..7]. Every other region assignment in the same switch uses param & 0x7: NPU_SET_OFM_REGION: st.ofm.region = param & 0x7; NPU_SET_IFM2_REGION: st.ifm2.region = param & 0x7; NPU_SET_WEIGHT_REGION: st.weight[0].region = param & 0x7; NPU_SET_SCALE_REGION: st.scale[0].region = param & 0x7; The 0x7f mask on IFM is inconsistent and appears to be a typo. feat_matrix_length() and calc_sizes() use the region index directly as an array subscript into the kzalloc'd info struct: info->region_size[fm->region] = max(...); A userspace caller supplying NPU_SET_IFM_REGION with param > 7 causes a write up to 127*8 = 1016 bytes past the start of region_size[], corrupting adjacent kernel heap data. Fix by applying the same & 0x7 mask used by all other region assignments. | ||||
| CVE-2026-53044 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: soc/tegra: cbb: Fix incorrect ARRAY_SIZE in fabric lookup tables Fix incorrect ARRAY_SIZE usage in fabric lookup tables which could cause out-of-bounds access during target timeout lookup. | ||||
| CVE-2026-53043 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2/dlm: validate qr_numregions in dlm_match_regions() Patch series "ocfs2/dlm: fix two bugs in dlm_match_regions()". In dlm_match_regions(), the qr_numregions field from a DLM_QUERY_REGION network message is used to drive loops over the qr_regions buffer without sufficient validation. This series fixes two issues: - Patch 1 adds a bounds check to reject messages where qr_numregions exceeds O2NM_MAX_REGIONS. The o2net layer only validates message byte length; it does not constrain field values, so a crafted message can set qr_numregions up to 255 and trigger out-of-bounds reads past the 1024-byte qr_regions buffer. - Patch 2 fixes an off-by-one in the local-vs-remote comparison loop, which uses '<=' instead of '<', reading one entry past the valid range even when qr_numregions is within bounds. This patch (of 2): The qr_numregions field from a DLM_QUERY_REGION network message is used directly as loop bounds in dlm_match_regions() without checking against O2NM_MAX_REGIONS. Since qr_regions is sized for at most O2NM_MAX_REGIONS (32) entries, a crafted message with qr_numregions > 32 causes out-of-bounds reads past the qr_regions buffer. Add a bounds check for qr_numregions before entering the loops. | ||||