Export limit exceeded: 26112 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26112 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64044 | 1 Linux | 1 Linux Kernel | 2026-09-02 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ovpn: respect peer refcount in CMD_NEW_PEER error path ovpn_nl_peer_new_doit()'s error path calls ovpn_peer_release() directly rather than ovpn_peer_put(), bypassing the kref. The accompanying comment ("peer was not yet hashed, thus it is not used in any context") holds for UDP but not for TCP. For UDP, the ovpn_socket union uses the .ovpn arm and never points back at a peer; UDP encap_recv looks up peers via the not-yet-populated hashtables, so the new peer is unreachable until ovpn_peer_add() publishes it. For TCP, ovpn_socket_new() sets ovpn_sock->peer and ovpn_tcp_socket_attach() publishes ovpn_sock via rcu_assign_sk_user_data(). From that moment until ovpn_socket_release() detaches in the error path, the TCP fd is fully wired: userspace recvmsg / sendmsg / close / poll on the fd, as well as the strparser-driven ovpn_tcp_rcv() path, can reach the peer through sk_user_data -> ovpn_sock->peer and bump its refcount via ovpn_peer_hold(). ovpn_tcp_socket_wait_finish() (called inside ovpn_socket_release()) drains strparser and the tx work, but does not synchronize with userspace syscall callers that already hold a peer reference. If ovpn_nl_peer_modify() or ovpn_peer_add() returns an error while such a caller is in flight - notably an ovpn_tcp_recvmsg() blocked in __skb_recv_datagram() on peer->tcp.user_queue - the direct ovpn_peer_release() destroys the peer while the caller still holds the reference, and the eventual ovpn_peer_put() from that caller operates on freed memory. Replace the direct destructor call with ovpn_peer_put() so the kref correctly defers destruction until the last reference is dropped. In the common case where no concurrent user is present, behaviour is unchanged: the kref hits zero immediately and ovpn_peer_release_kref() runs the same destructor. With this conversion ovpn_peer_release() has no callers outside peer.c - ovpn_peer_release_kref() in the same translation unit is the only remaining user - so make it static and drop its declaration from peer.h. | ||||
| CVE-2026-64045 | 1 Linux | 1 Linux Kernel | 2026-09-02 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: ovpn: tcp - use cached peer pointer in ovpn_tcp_close() ovpn_tcp_close() loads the ovpn_socket via rcu_dereference_sk_user_data() under rcu_read_lock(), takes a reference on sock->peer, caches the peer pointer in a local, and drops the read lock. It then passes sock->peer (rather than the cached local) to ovpn_peer_del(), re-dereferencing the ovpn_socket after the RCU read section has ended. Unlike ovpn_tcp_sendmsg(), which uses the same "load under RCU, use after unlock" pattern but is protected by lock_sock() held across the function, ovpn_tcp_close() runs without the socket lock: inet_release() invokes sk_prot->close() without taking lock_sock first. ovpn_socket_release() can therefore complete its kref_put -> detach -> synchronize_rcu -> kfree(sock) sequence concurrently, in the window after ovpn_tcp_close() drops rcu_read_lock() but before it dereferences sock->peer. The synchronize_rcu() in ovpn_socket_release() protects readers that use the dereferenced pointer inside the RCU read section, not those that escape the pointer to a local and use it afterwards. A reproducer follows the pattern of commit 94560267d6c4 ("ovpn: tcp - don't deref NULL sk_socket member after tcp_close()"): trigger a peer removal (keepalive expiration or netlink OVPN_CMD_DEL_PEER) at the same moment userspace closes the TCP fd. That commit fixed the detach-side of the same race window; this one fixes the close-side at a different victim. Tighten the entry block to read sock->peer exactly once into the cached peer local, and route all subsequent uses (the hold check, the ovpn_peer_del() call, and the prot->close() invocation) through that local. sock->peer is only ever written once in ovpn_socket_new() under lock_sock(), before rcu_assign_sk_user_data() publishes the ovpn_socket, and is never reassigned afterwards - but the previous multi-read pattern made that invariant implicit rather than explicit. The same multi-read shape exists in ovpn_tcp_recvmsg(), ovpn_tcp_sendmsg(), ovpn_tcp_data_ready() and ovpn_tcp_write_space(); those will be cleaned up via a dedicated helper in a follow-up net-next series. | ||||
| CVE-2026-64049 | 1 Linux | 1 Linux Kernel | 2026-09-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm/adreno: fix userspace-triggered crash on a2xx-a4xx Before a5xx Adreno driver will not try fetching UBWC params (because those generations didn't support UBWC anyway), however it's still possible to query UBWC-related params from the userspace, triggering possible NULL pointer dereference. Check for UBWC config in adreno_get_param() and return sane defaults if there is none. Patchwork: https://patchwork.freedesktop.org/patch/717778/ | ||||
| CVE-2026-64050 | 1 Linux | 1 Linux Kernel | 2026-09-02 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm/dpu: don't mix devm and drmm functions Mixing devm and drmm functions will result in a use-after-free on msm driver teardown if userspace keeps a reference on the drm device: The WB connector data will be destroyed because of the use of devm_kzalloc()), while the usersoace still can try interacting with the WB connector (which uses drmm_ functions). Change dpu_writeback_init() to use drmm_. Patchwork: https://patchwork.freedesktop.org/patch/722656/ | ||||
| CVE-2026-64051 | 1 Linux | 1 Linux Kernel | 2026-09-02 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: accel/qaic: Add overflow check to remap_pfn_range during mmap The call to remap_pfn_range in qaic_gem_object_mmap is susceptible to (re)mapping beyond the VMA if the BO is too large. This can cause use after free issues when munmap() unmaps only the VMA region and not the additional mappings. To prevent this, check the remaining size of the VMA before remapping and truncate the remapped length if sg->length is too large. [jhugo: fix braces from checkpatch --strict] | ||||
| CVE-2026-64052 | 1 Linux | 1 Linux Kernel | 2026-09-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: block: bio-integrity: Fix null-ptr-deref in bio_integrity_map_user() pin_user_pages_fast() can partially succeed and return the number of pages that were actually pinned. However, the bio_integrity_map_user() does not handle this partial pinning. This leads to a general protection fault since bvec_from_pages() dereferences an unpinned page address, which is 0. To fix this, add a check to verify that all requested memory is pinned. If partial pinning occurs, unpin the memory and return -EFAULT. Kernel Oops: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 0 UID: 0 PID: 1061 Comm: nvme-passthroug Not tainted 7.0.0-11783-g90957f9314e8-dirty #16 PREEMPT(lazy) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014 RIP: 0010:bio_integrity_map_user.cold+0x1b0/0x9d6 | ||||
| CVE-2026-12878 | 4 Linux, Microsoft, Octopus and 1 more | 4 Linux Kernel, Windows, Codefresh and 1 more | 2026-09-02 | 8.8 High |
| In affected versions of the Codefresh platform an authenticated user can utilize an API endpoint to elevate to Admin permissions. | ||||
| CVE-2026-47606 | 2 Linux, Nvidia | 2 Linux Kernel, Triton Inference Server | 2026-09-02 | 6.5 Medium |
| NVIDIA Triton Inference Server for Linux contains a vulnerability where an attacker could cause an absolute path traversal. A successful exploit might lead to code execution and information disclosure. | ||||
| CVE-2026-47627 | 2 Linux, Nvidia | 2 Linux Kernel, Triton Inference Server | 2026-09-02 | 9.8 Critical |
| NVIDIA Triton Inference Server for Linux contains a vulnerability where an attacker could cause path traversal. A successful exploit might lead to denial of service. | ||||
| CVE-2025-64649 | 2 Ibm, Linux | 2 Concert, Linux Kernel | 2026-09-02 | 5.9 Medium |
| IBM Concert 1.0.0 through 2.3.1 could allow a remote attacker to perform unauthorized actions using man in the middle techniques due to improper certificate validation. | ||||
| CVE-2026-53153 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-09-02 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/list_lru: drain before clearing xarray entry on reparent memcg_reparent_list_lrus() clears the dying memcg's xarray entry with xas_store(&xas, NULL) before reparenting its per-node lists into the parent. This opens a window where a concurrent list_lru_del() arriving for the dying memcg sees xa_load() == NULL, walks to the parent in lock_list_lru_of_memcg(), takes the parent's per-node lock, and calls list_del_init() on an item still physically linked on the dying memcg's list. If another in-flight thread holds the dying memcg's per-node lock at the same moment (another list_lru_del, or a list_lru_walk_one running an isolate callback), both threads modify ->next/->prev pointers on the same physical list under different locks. Adjacent items can corrupt each other's links. Fix it by reversing the order: reparent each per-node list and mark the child's list lru dead and then clear the xarray entry. Any concurrent list_lru op that finds the still-set xarray entry either takes the dying memcg's per-node lock (synchronizing with the drain) or sees LONG_MIN and walks to the parent, where the items now live. | ||||
| CVE-2025-68781 | 1 Linux | 1 Linux Kernel | 2026-09-02 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: phy: fsl-usb: Fix use-after-free in delayed work during device removal The delayed work item otg_event is initialized in fsl_otg_conf() and scheduled under two conditions: 1. When a host controller binds to the OTG controller. 2. When the USB ID pin state changes (cable insertion/removal). A race condition occurs when the device is removed via fsl_otg_remove(): the fsl_otg instance may be freed while the delayed work is still pending or executing. This leads to use-after-free when the work function fsl_otg_event() accesses the already freed memory. The problematic scenario: (detach thread) | (delayed work) fsl_otg_remove() | kfree(fsl_otg_dev) //FREE| fsl_otg_event() | og = container_of(...) //USE | og-> //USE Fix this by calling disable_delayed_work_sync() in fsl_otg_remove() before deallocating the fsl_otg structure. This ensures the delayed work is properly canceled and completes execution prior to memory deallocation. This bug was identified through static analysis. | ||||
| CVE-2026-3627 | 2 Ibm, Linux | 2 Concert, Linux Kernel | 2026-09-02 | 9.1 Critical |
| IBM Concert 1.0.0 through 2.3.1 is vulnerable to SQL injection. A remote attacker could send specially crafted SQL statements, which could allow the attacker to view, add, modify, or delete information in the back-end database. | ||||
| CVE-2026-72323 | 1 Linux | 1 Linux Kernel | 2026-09-02 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ipv4: igmp: Fix potential UAF in igmp_gq_start_timer() A race condition exists between device teardown (inetdev_destroy) and incoming IGMP query processing (igmp_rcv), leading to a Use-After-Free in the IGMP timer callback. During device destruction, inetdev_destroy() drops the primary reference to in_device, which can drop its refcount to 0. The actual freeing of in_device memory is deferred via RCU (using call_rcu()). Concurrently, igmp_rcv() runs under RCU read lock and obtains the in_device pointer. Because the memory is RCU-protected, CPU-0 can safely dereference in_device even if its refcount has hit 0. However, if CPU-0 calls igmp_gq_start_timer() and re-arms the timer, it attempts to acquire a reference using in_dev_hold(). This increments the refcount from 0 to 1, triggering a "refcount_t: addition on 0" warning. Since the in_device memory is still scheduled to be freed after the RCU grace period (as the free callback does not check the refcount again), the device is freed while the timer is still armed. When the timer expires, it accesses the freed memory, causing a kernel panic. Fix this by using refcount_inc_not_zero() (via a new helper in_dev_hold_safe()) to prevent acquiring a reference if the device is already being destroyed. If the refcount is 0, we do not arm the timer. A similar issue in IPv6 MLD is fixed in a subsequent patch. | ||||
| CVE-2026-68476 | 1 Linux | 1 Linux Kernel | 2026-09-02 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ipvs: reload ip header after head reallocation __ip_vs_get_out_rt() calls skb_ensure_writable() which may reallocate skb->head. | ||||
| CVE-2026-53089 | 1 Linux | 1 Linux Kernel | 2026-09-02 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix use-after-free in offloaded map/prog info fill When querying info for an offloaded BPF map or program, bpf_map_offload_info_fill_ns() and bpf_prog_offload_info_fill_ns() obtain the network namespace with get_net(dev_net(offmap->netdev)). However, the associated netdev's netns may be racing with teardown during netns destruction. If the netns refcount has already reached 0, get_net() performs a refcount_t increment on 0, triggering: refcount_t: addition on 0; use-after-free. Although rtnl_lock and bpf_devs_lock ensure the netdev pointer remains valid, they cannot prevent the netns refcount from reaching zero. Fix this by using maybe_get_net() instead of get_net(). maybe_get_net() uses refcount_inc_not_zero() and returns NULL if the refcount is already zero, which causes ns_get_path_cb() to fail and the caller to return -ENOENT -- the correct behavior when the netns is being destroyed. | ||||
| CVE-2026-45963 | 1 Linux | 1 Linux Kernel | 2026-09-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: nau8821: Cancel delayed work on component remove Attempting to unload the driver while a jack detection work is pending would likely crash the kernel when it is eventually scheduled for execution: [ 1984.896308] BUG: unable to handle page fault for address: ffffffffc10c2a20 [...] [ 1984.896388] Hardware name: Valve Jupiter/Jupiter, BIOS F7A0131 01/30/2024 [ 1984.896396] Workqueue: events nau8821_jdet_work [snd_soc_nau8821] [ 1984.896414] RIP: 0010:__mutex_lock+0x9f/0x11d0 [...] [ 1984.896504] Call Trace: [ 1984.896511] <TASK> [ 1984.896524] ? snd_soc_dapm_disable_pin+0x26/0x60 [snd_soc_core] [ 1984.896572] ? snd_soc_dapm_disable_pin+0x26/0x60 [snd_soc_core] [ 1984.896596] snd_soc_dapm_disable_pin+0x26/0x60 [snd_soc_core] [ 1984.896622] nau8821_jdet_work+0xeb/0x1e0 [snd_soc_nau8821] [ 1984.896636] process_one_work+0x211/0x590 [ 1984.896649] ? srso_return_thunk+0x5/0x5f [ 1984.896670] worker_thread+0x1cd/0x3a0 Cancel unscheduled jdet_work or wait for its execution to finish before the component driver gets removed. | ||||
| CVE-2025-40168 | 1 Linux | 1 Linux Kernel | 2026-09-02 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: smc: Use __sk_dst_get() and dst_dev_rcu() in smc_clc_prfx_match(). smc_clc_prfx_match() is called from smc_listen_work() and not under RCU nor RTNL. Using sk_dst_get(sk)->dev could trigger UAF. Let's use __sk_dst_get() and dst_dev_rcu(). Note that the returned value of smc_clc_prfx_match() is not used in the caller. | ||||
| CVE-2025-40102 | 1 Linux | 1 Linux Kernel | 2026-09-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Prevent access to vCPU events before init Another day, another syzkaller bug. KVM erroneously allows userspace to pend vCPU events for a vCPU that hasn't been initialized yet, leading to KVM interpreting a bunch of uninitialized garbage for routing / injecting the exception. In one case the injection code and the hyp disagree on whether the vCPU has a 32bit EL1 and put the vCPU into an illegal mode for AArch64, tripping the BUG() in exception_target_el() during the next injection: kernel BUG at arch/arm64/kvm/inject_fault.c:40! Internal error: Oops - BUG: 00000000f2000800 [#1] SMP CPU: 3 UID: 0 PID: 318 Comm: repro Not tainted 6.17.0-rc4-00104-g10fd0285305d #6 PREEMPT Hardware name: linux,dummy-virt (DT) pstate: 21402009 (nzCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) pc : exception_target_el+0x88/0x8c lr : pend_serror_exception+0x18/0x13c sp : ffff800082f03a10 x29: ffff800082f03a10 x28: ffff0000cb132280 x27: 0000000000000000 x26: 0000000000000000 x25: ffff0000c2a99c20 x24: 0000000000000000 x23: 0000000000008000 x22: 0000000000000002 x21: 0000000000000004 x20: 0000000000008000 x19: ffff0000c2a99c20 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 00000000200000c0 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : ffff800082f03af8 x7 : 0000000000000000 x6 : 0000000000000000 x5 : ffff800080f621f0 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 000000000040009b x1 : 0000000000000003 x0 : ffff0000c2a99c20 Call trace: exception_target_el+0x88/0x8c (P) kvm_inject_serror_esr+0x40/0x3b4 __kvm_arm_vcpu_set_events+0xf0/0x100 kvm_arch_vcpu_ioctl+0x180/0x9d4 kvm_vcpu_ioctl+0x60c/0x9f4 __arm64_sys_ioctl+0xac/0x104 invoke_syscall+0x48/0x110 el0_svc_common.constprop.0+0x40/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x34/0xf0 el0t_64_sync_handler+0xa0/0xe4 el0t_64_sync+0x198/0x19c Code: f946bc01 b4fffe61 9101e020 17fffff2 (d4210000) Reject the ioctls outright as no sane VMM would call these before KVM_ARM_VCPU_INIT anyway. Even if it did the exception would've been thrown away by the eventual reset of the vCPU's state. | ||||
| CVE-2025-40064 | 1 Linux | 1 Linux Kernel | 2026-09-02 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: smc: Fix use-after-free in __pnet_find_base_ndev(). syzbot reported use-after-free of net_device in __pnet_find_base_ndev(), which was called during connect(). [0] smc_pnet_find_ism_resource() fetches sk_dst_get(sk)->dev and passes down to pnet_find_base_ndev(), where RTNL is held. Then, UAF happened at __pnet_find_base_ndev() when the dev is first used. This means dev had already been freed before acquiring RTNL in pnet_find_base_ndev(). While dev is going away, dst->dev could be swapped with blackhole_netdev, and the dev's refcnt by dst will be released. We must hold dev's refcnt before calling smc_pnet_find_ism_resource(). Also, smc_pnet_find_roce_resource() has the same problem. Let's use __sk_dst_get() and dst_dev_rcu() in the two functions. [0]: BUG: KASAN: use-after-free in __pnet_find_base_ndev+0x1b1/0x1c0 net/smc/smc_pnet.c:926 Read of size 1 at addr ffff888036bac33a by task syz.0.3632/18609 CPU: 1 UID: 0 PID: 18609 Comm: syz.0.3632 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/18/2025 Call Trace: <TASK> dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xca/0x240 mm/kasan/report.c:482 kasan_report+0x118/0x150 mm/kasan/report.c:595 __pnet_find_base_ndev+0x1b1/0x1c0 net/smc/smc_pnet.c:926 pnet_find_base_ndev net/smc/smc_pnet.c:946 [inline] smc_pnet_find_ism_by_pnetid net/smc/smc_pnet.c:1103 [inline] smc_pnet_find_ism_resource+0xef/0x390 net/smc/smc_pnet.c:1154 smc_find_ism_device net/smc/af_smc.c:1030 [inline] smc_find_proposal_devices net/smc/af_smc.c:1115 [inline] __smc_connect+0x372/0x1890 net/smc/af_smc.c:1545 smc_connect+0x877/0xd90 net/smc/af_smc.c:1715 __sys_connect_file net/socket.c:2086 [inline] __sys_connect+0x313/0x440 net/socket.c:2105 __do_sys_connect net/socket.c:2111 [inline] __se_sys_connect net/socket.c:2108 [inline] __x64_sys_connect+0x7a/0x90 net/socket.c:2108 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f47cbf8eba9 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f47ccdb1038 EFLAGS: 00000246 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 00007f47cc1d5fa0 RCX: 00007f47cbf8eba9 RDX: 0000000000000010 RSI: 0000200000000280 RDI: 000000000000000b RBP: 00007f47cc011e19 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007f47cc1d6038 R14: 00007f47cc1d5fa0 R15: 00007ffc512f8aa8 </TASK> The buggy address belongs to the physical page: page: refcount:0 mapcount:0 mapping:0000000000000000 index:0xffff888036bacd00 pfn:0x36bac flags: 0xfff00000000000(node=0|zone=1|lastcpupid=0x7ff) raw: 00fff00000000000 ffffea0001243d08 ffff8880b863fdc0 0000000000000000 raw: ffff888036bacd00 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected page_owner tracks the page as freed page last allocated via order 2, migratetype Unmovable, gfp_mask 0x446dc0(GFP_KERNEL_ACCOUNT|__GFP_ZERO|__GFP_NOWARN|__GFP_RETRY_MAYFAIL|__GFP_COMP), pid 16741, tgid 16741 (syz-executor), ts 343313197788, free_ts 380670750466 set_page_owner include/linux/page_owner.h:32 [inline] post_alloc_hook+0x240/0x2a0 mm/page_alloc.c:1851 prep_new_page mm/page_alloc.c:1859 [inline] get_page_from_freelist+0x21e4/0x22c0 mm/page_alloc.c:3858 __alloc_frozen_pages_noprof+0x181/0x370 mm/page_alloc.c:5148 alloc_pages_mpol+0x232/0x4a0 mm/mempolicy.c:2416 ___kmalloc_large_node+0x5f/0x1b0 mm/slub.c:4317 __kmalloc_large_node_noprof+0x18/0x90 mm/slub.c:4348 __do_kmalloc_node mm/slub.c:4364 [inline] __kvmalloc_node ---truncated--- | ||||