Export limit exceeded: 409964 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (409964 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98538 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: writeback: bound cleanup_offline_cgwb() rescans by rotating scanned inodes cleanup_offline_cgwb() prepares at most WB_MAX_INODES_PER_ISW inodes per call and is called again until the dying wb is drained, but every call walks wb->b_attached and then wb->b_dirty_time from the same end. Inodes already prepared (they stay on the list with I_WB_SWITCH set until the switch worker runs) and inodes that cannot be switched (I_FREEING, I_WILL_FREE, !SB_ACTIVE, DAX, already on the target wb) stay where they are, so each pass rescans a growing run of them under wb->list_lock and a full drain is quadratic in the number of inodes on the list. With ~17M inodes attached to one dying cgwb we saw this end in soft lockups, with CPUs reported stuck for 21-48s. Walk both lists from the oldest end and move every scanned inode to the newest end, so the next pass starts where the previous one stopped and the drain becomes linear. b_attached is unordered, so nobody sees the reorder there. b_dirty_time is ordered by dirtied_when, but the oldest unscanned inode stays at the end move_expired_inodes() picks from, sync takes the whole list regardless of order, and prepared inodes leave the list as soon as the switch work runs and get a new dirtied_time_when on the new wb anyway, so the only inodes left out of order are the ones that can never switch (DAX), and only on the dying wb. | ||||
| CVE-2026-98536 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: writeback: report a Tasks-RCU quiescent state per cgwb drain pass cleanup_offline_cgwbs_workfn() drains a dying cgwb by calling cleanup_offline_cgwb() until it returns false, with a cond_resched() between passes. On a CONFIG_PREEMPTION kernel that cond_resched() does nothing: _cond_resched() is a plain "return 0", and under PREEMPT_DYNAMIC the full and lazy modes disable it. Since commit 7dadeaa6e851 ("sched: Further restrict the preemption modes") those are the only two models on the architectures with PREEMPT_LAZY support, arm64 and x86 among them, so the drain loop never reports a Tasks-RCU quiescent state. A worker draining a cgwb with millions of attached inodes runs for minutes. On a 6.18 arm64 host in lazy mode the cgwb worker drained one dying cgroup's writeback domain for over 11 minutes. A BPF program unlink (bpf_trampoline_unlink_prog -> bpf_trampoline_update -> unregister_ftrace_direct -> ftrace_shutdown -> synchronize_rcu_tasks()) waited on that grace period while holding the trampoline mutex, 42 tasks queued behind it in D state, and the hung task detector fired at 614 s and panicked the host. Any BPF or ftrace detach during a long drain inherits the drain's length. Fix this by calling cond_resched_tasks_rcu_qs() so we do not stall out anybody who calls sycnrhonize_rcu_tasks(). We put this in a do { } while loop because if we have many small cgroups cleanup_offline_cgwb() will return false and we will never call cond_resched_tasks_rcu_qs(), creating the same problem. | ||||
| CVE-2026-98535 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fsl/fman: Fix clk reference leak in read_dts_node() of_clk_get() returns a clock with its reference count incremented, but read_dts_node() only uses it to read the rate and never calls clk_put(). The clock is not stored anywhere, so the reference cannot be released later either. Release the clock once its rate has been read, which also covers the error path taken when the rate is zero. | ||||
| CVE-2026-98532 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: do not let ipv6_find_hdr() return an offset past the packet end ipv6_find_hdr() walks the extension header chain, skipping each header by the length that header itself declares. ipv6_optlen() returns up to 2048, and the skip is never checked against skb->len, so the offset stored in *offset can point past the end of the packet. openvswitch installs that offset as the transport header, and update_ipv6_checksum() then reads and writes the transport checksum field out of bounds: BUG: KASAN: slab-use-after-free in inet_proto_csum_replace16+0x445/0x470 Read of size 2 at addr ffff88810b754b06 by task ovs_ipv6_oob/629 CPU: 4 UID: 1000 PID: 629 Comm: ovs_ipv6_oob Tainted: G N 7.3.0-rc3+ #348 Call Trace: inet_proto_csum_replace16+0x445/0x470 set_ipv6_addr+0x3dd/0x460 do_execute_actions+0x6a3d/0x7c40 ovs_execute_actions+0xfd/0x480 ovs_packet_cmd_execute+0xc38/0xf20 genl_rcv_msg+0x59e/0x870 netlink_rcv_skb+0x18b/0x450 genl_rcv+0x2d/0x40 netlink_unicast+0x6bc/0xa20 The buggy address belongs to the object at ffff88810b754980 which belongs to the cache skbuff_small_head of size 704 The buggy address is located 390 bytes inside of freed 704-byte region [ffff88810b754980, ffff88810b754c40) Other callers use that offset too, so bound it here rather than in one caller. Reject a header whose declared length does not fit in the packet. ipv6_find_hdr() already fails with -EBADMSG on a malformed chain, so this adds no new failure mode. | ||||
| CVE-2026-98527 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: gpio: zynq: fix runtime PM leak on request error path pm_runtime_get_sync() leaves the usage counter incremented even when it fails, and zynq_gpio_request() returns the error without dropping it. gpiolib does not call ->free() when ->request() fails, so zynq_gpio_free(), which holds the only matching pm_runtime_put(), never runs. The reference is leaked and the controller can no longer runtime-suspend, so its clock stays enabled. Switch to pm_runtime_resume_and_get(), which only increments the usage counter on success. | ||||
| CVE-2026-98526 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: llc: reserve device headroom for allocated frames llc_alloc_frame() reserves link-layer headroom using the device type. This is insufficient for stacked Ethernet devices such as VLAN devices, where vlan_dev_hard_header() pushes a VLAN header before the lower device's Ethernet header. An LLC response on such a device can therefore underflow skb headroom in eth_header(). Use LL_RESERVED_SPACE() to account for the device's actual required headroom while preserving the existing LLC device-type check. | ||||
| CVE-2026-98525 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mctp: route: iterate socket tag list in mctp_lookup_prealloc_tag() When a socket transmits a packet with MCTP_TAG_PREALLOC set, mctp_lookup_prealloc_tag() iterates over the per-netns &mns->keys list and matches netid, req_tag, peer_addr, and manual_alloc, without checking whether tmp->sk == &msk->sk. This allows any MCTP socket in the same network namespace to use and consume another socket's preallocated tag. Iterate the socket's own tag list (&msk->keys via sklist) instead of the namespace-wide &mns->keys list in mctp_lookup_prealloc_tag(), ensuring that only tags allocated by msk are matched. Tested in QEMU against Linux 7.3.0-rc3 by allocating a manual tag (0x18) on socket A via SIOCMCTPALLOCTAG for peer EID 9 and sending a 4-byte message with MCTP_TAG_PREALLOC from socket B in the same network namespace. On the unfixed kernel, sendto(sock_b) using socket A's preallocated tag succeeds (ret = 4); with this patch applied, sendto(sock_b) fails with -ENOENT (errno = 2) while sendto(sock_a) succeeds (ret = 4). | ||||
| CVE-2026-98524 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: rds: ib: Clear the sg list when mapping an MR fails rds_ib_map_frmr() stores the caller's scatterlist in the MR before DMA mapping and registration can fail. On failure, __rds_rdma_map() unpins the pages and frees the scatterlist, but rds_ib_free_frmr() can still return the MR to the pool with the stale pointer set. This leaves the pool with a dangling scatterlist and can lead to local privilege escalation. KASAN detects the resulting use-after-free when the MR is later torn down: BUG: KASAN: slab-use-after-free in __rds_ib_teardown_mr Read of size 8 Call Trace: __rds_ib_teardown_mr rds_ib_unreg_frmr rds_ib_flush_mr_pool rds_ib_flush_mrs rds_free_mr rds_setsockopt Store the scatterlist in the MR only after DMA mapping succeeds. If DMA mapping fails, return directly while the MR fields remain clear; the caller keeps ownership of the scatterlist and its pinned pages. If a later registration step fails, unmap the scatterlist and clear the MR fields before returning. | ||||
| CVE-2026-98522 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/imagination: Propagate map failures correctly from pvr_mmu_map_sgl() Map failure from pvr_mmu_map_sgl() interface was not returned correctly to pvr_mmu_map() interface. This resulted in pvr_mmu_map() interface to continue instead of returning an error to caller. Fix it by returning a proper error code from pvr_mmu_map_sgl() interface. Call stack for crash: [ 1179.286237] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 [ 1179.295067] Mem abort info: [ 1179.297877] ESR = 0x0000000096000004 [ 1179.301656] EC = 0x25: DABT (current EL), IL = 32 bits [ 1179.306987] SET = 0, FnV = 0 [ 1179.310048] EA = 0, S1PTW = 0 [ 1179.313198] FSC = 0x04: level 0 translation fault [ 1179.318096] Data abort info: [ 1179.320993] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 1179.326483] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 1179.331546] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 1179.336895] user pgtable: 4k pages, 48-bit VAs, pgdp=000000009822a000 [ 1179.343402] [0000000000000008] pgd=0000000000000000, p4d=0000000000000000 [ 1179.350243] Internal error: Oops: 0000000096000004 [#2] SMP [ 1179.355908] Modules linked in: powervr gpu_sched drm_shmem_helper drm_gpuvm drm_exec xhci_plat_hcd xhci_hcd dwc3 usbcore usb_common snd_soc_simple_card snd_soc_simple_card_utils dwc3_am62 at24 sa2ul sha512 libsha512 sha256 authenc sch_fq_codel fuse dm_mod ipv6 [ 1179.378992] CPU: 1 UID: 1000 PID: 680 Comm: deqp-vk Tainted: G D 6.17.0 #1 PREEMPT [ 1179.388120] Tainted: [D]=DIE [ 1179.390994] Hardware name: Texas Instruments AM625 SK (DT) [ 1179.396467] pstate: 00000005 (nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 1179.403415] pc : pvr_mmu_op_context_unmap_curr_page+0x6c/0x134 [powervr] [ 1179.410140] lr : pvr_mmu_op_context_unmap_curr_page+0x58/0x134 [powervr] [ 1179.416848] sp : ffff8000839ab8c0 [ 1179.420153] x29: ffff8000839ab8c0 x28: 0000000000000001 x27: 000000008f386000 [ 1179.427283] x26: ffff000016d1df98 x25: 0000000000247000 x24: 00000000000001e6 [ 1179.434413] x23: 0000000000000002 x22: 000000000000ffff x21: 0000000000000247 [ 1179.441540] x20: 0000000000000245 x19: ffff000016d1df60 x18: 0000000000000002 [ 1179.448668] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000001 [ 1179.455793] x14: 0000000000060810 x13: ffff80007fffffff x12: ffff000004190480 [ 1179.462921] x11: ffff8000853f7000 x10: ffff8000811ae000 x9 : ffff0000041900b8 [ 1179.470051] x8 : 0000000000000000 x7 : 00000000990c4001 x6 : 0000000000000007 [ 1179.477177] x5 : ffff000016d1df60 x4 : 0000000000000000 x3 : ffff00000a7d8000 [ 1179.484306] x2 : 00000000000001ff x1 : 0000000000000000 x0 : 0000000000000000 [ 1179.491433] Call trace: [ 1179.493872] pvr_mmu_op_context_unmap_curr_page+0x6c/0x134 [powervr] (P) [ 1179.500582] pvr_mmu_map+0x31c/0x388 [powervr] [ 1179.505027] pvr_vm_gpuva_map+0x40/0x88 [powervr] [ 1179.509732] __drm_gpuvm_sm_map+0x250/0x44c [drm_gpuvm] [ 1179.514952] drm_gpuvm_sm_map+0x48/0x5c [drm_gpuvm] [ 1179.519822] pvr_vm_bind_op_exec+0x64/0x70 [powervr] [ 1179.524785] pvr_vm_map+0x1f8/0x2a8 [powervr] [ 1179.529142] pvr_ioctl_vm_map+0x12c/0x188 [powervr] [ 1179.534018] drm_ioctl_kernel+0xb8/0x128 [ 1179.537941] drm_ioctl+0x21c/0x4ec [ 1179.541337] __arm64_sys_ioctl+0xac/0x108 [ 1179.545344] invoke_syscall+0x44/0x100 [ 1179.549091] el0_svc_common.constprop.0+0x40/0xe0 [ 1179.553790] do_el0_svc+0x1c/0x28 [ 1179.557106] el0_svc+0x34/0xf0 [ 1179.560159] el0t_64_sync_handler+0xd0/0xe4 [ 1179.564334] el0t_64_sync+0x198/0x19c [ 1179.567996] Code: 54000300 35000360 f9402261 79409a62 (f9400421) [ 1179.574081] ---[ end trace 0000000000000000 ]--- | ||||
| CVE-2026-98521 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915: fix incorrect RCU teardown order i915_gem_busy_ioctl uses dma_resv_for_each_fence_unlocked() to iterate over the fences in an GEM object without holding a reference but only the RCU read side lock. What can happen here is that the GEM object is destroyed concurrently while i915_gem_busy_ioctl is still running. This won't free the GEM objects memory, but still drops all the dma_fence references. Now when dma_resv_for_each_fence_unlocked() sees a destroyed dma_fence it assumes that a new fence list was installed and re-starts the loop. But in the case of a destroyed GEM object a new fence list is never installed, only the old one freed and therefore the iteration never finishes resulting in an endless loop. The solution is to drop the fence references only after the RCU grace period. The fixes tag is not necessary the patch introducing the problem, but the one making it so worse that we need to address it. This problem was pointed out by Sashiko-bot. (cherry picked from commit 5113479556025093bf8133bb2dcaa33be2d50921) | ||||
| CVE-2026-98519 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix runtime PM leak in amdgpu_debugfs_test_ib_show() amdgpu_debugfs_test_ib_show() resumes the device with pm_runtime_get_sync() before taking the reset domain semaphore with down_write_killable(). If the write lock acquisition is interrupted, the function returns without calling pm_runtime_put_autosuspend(), leaking the runtime PM reference acquired for the device and keeping the GPU awake. Drop the runtime PM reference on the interrupted down_write_killable() error path before returning. (cherry picked from commit ec30a576c2d4c0364549e6c04218f50704ef56c8) | ||||
| CVE-2026-98517 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/nouveau/uvmm: fix UAF in nouveau_uvmm_sm when BO is in TTM_PL_SYSTEM nouveau_uvmm_sm() calls op_map(), which passes bo->resource through nouveau_mem() to nouveau_uvma_map(). nouveau_uvmm_vmm_map() then reads mem->mem.type. But this is only valid when bo->resource is backed by struct nouveau_mem, as is the case for VRAM and TT resources. If the BO is left in TTM_PL_SYSTEM, bo->resource is only a struct ttm_resource. Treating it as struct nouveau_mem makes the mem->mem.type read past the end of the resource, causing a KASAN: slab-use-after-free Read in nouveau_uvmm_sm report: BUG: KASAN: slab-use-after-free in nouveau_uvmm_vmm_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:152 [inline] BUG: KASAN: slab-use-after-free in nouveau_uvma_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:199 [inline] BUG: KASAN: slab-use-after-free in op_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:849 [inline] BUG: KASAN: slab-use-after-free in nouveau_uvmm_sm.constprop.0+0x6ab/0x900 drivers/gpu/drm/nouveau/nouveau_uvmm.c:903 Read of size 1 at addr ffff888127d3e3a0 by task kworker/0:1/11 CPU: 0 UID: 0 PID: 11 Comm: kworker/0:1 Not tainted 7.2.0 #5 PREEMPT(lazy) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Workqueue: nouveau_sched_wq_2224 drm_sched_run_job_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x95/0xe0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xcb/0x5a0 mm/kasan/report.c:482 kasan_report+0xca/0x100 mm/kasan/report.c:595 nouveau_uvmm_vmm_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:152 [inline] nouveau_uvma_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:199 [inline] op_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:849 [inline] nouveau_uvmm_sm.constprop.0+0x6ab/0x900 drivers/gpu/drm/nouveau/nouveau_uvmm.c:903 nouveau_uvmm_sm_unmap drivers/gpu/drm/nouveau/nouveau_uvmm.c:932 [inline] nouveau_uvmm_bind_job_run+0xd6/0x250 drivers/gpu/drm/nouveau/nouveau_uvmm.c:1532 nouveau_job_run drivers/gpu/drm/nouveau/nouveau_sched.c:350 [inline] nouveau_sched_run_job+0x62/0xd0 drivers/gpu/drm/nouveau/nouveau_sched.c:364 drm_sched_run_job_work+0x356/0xa10 drivers/gpu/drm/scheduler/sched_main.c:1061 process_one_work+0x8a5/0x1900 kernel/workqueue.c:3322 process_scheduled_works kernel/workqueue.c:3405 [inline] worker_thread+0x5dd/0xd80 kernel/workqueue.c:3486 kthread+0x31d/0x420 kernel/kthread.c:436 ret_from_fork+0x662/0x940 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> Allocated by task 2224 on cpu 0 at 66.550027s: kasan_save_stack+0x24/0x50 mm/kasan/common.c:57 kasan_save_track+0x17/0x60 mm/kasan/common.c:78 poison_kmalloc_redzone mm/kasan/common.c:398 [inline] __kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:415 kasan_kmalloc include/linux/kasan.h:263 [inline] __do_kmalloc_node mm/slub.c:5334 [inline] __kmalloc_noprof+0x304/0x7c0 mm/slub.c:5359 _kmalloc_noprof include/linux/slab.h:992 [inline] dma_resv_list_alloc+0x27/0x90 drivers/dma-buf/dma-resv.c:106 dma_resv_reserve_fences+0x60e/0xa30 drivers/dma-buf/dma-resv.c:205 ttm_bo_alloc_resource+0x12c/0xbd0 drivers/gpu/drm/ttm/ttm_bo.c:721 ttm_bo_validate+0x1bc/0x4a0 drivers/gpu/drm/ttm/ttm_bo.c:856 ttm_bo_init_reserved+0x2c3/0x570 drivers/gpu/drm/ttm/ttm_bo.c:970 nouveau_bo_init+0x159/0x2c0 drivers/gpu/drm/nouveau/nouveau_bo.c:359 nouveau_gem_new+0x234/0x5f0 drivers/gpu/drm/nouveau/nouveau_gem.c:272 nouveau_gem_ioctl_new+0x1eb/0x420 drivers/gpu/drm/nouveau/nouveau_gem.c:352 drm_ioctl_kernel+0x192/0x350 drivers/gpu/drm/drm_ioctl.c:817 drm_ioctl+0x4f8/0xb40 drivers/gpu/drm/drm_ioctl.c:914 nouveau_drm_ioctl+0xea/0x2c0 drivers/gpu/drm/nouveau/nouveau_drm.c:1338 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl fs/ioctl.c:583 [inline] __x64_sys_ioctl+0x180/0x1d0 fs/ioctl.c:583 do_syscall_x64 ar ---truncated--- | ||||
| CVE-2026-98516 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: Fix bridge reference leak in nv1a_ram_new() pci_get_domain_bus_and_slot() takes a reference to the PCI device, which is never released once the memory size has been read from its config space. Drop the reference before returning. | ||||
| CVE-2026-98514 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: Fix gem reference leak in validate_init() On the ttm_bo_reserve() failure and "vma not found" error paths, the loop breaks without adding the looked-up object to any validate list, so the reference taken by drm_gem_object_lookup() is never released; validate_fini() only walks the spliced lists. Drop the reference before breaking out on both paths. | ||||
| CVE-2026-98513 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: Fix runtime PM leak in nouveau_connector_detect() If nvif_outp_edid_get() fails, nouveau_connector_detect() returns early without dropping the runtime PM reference taken at the start of the function, keeping the device powered on until the next successful detect. Balance the reference on the error path like the other exit paths do. | ||||
| CVE-2026-98512 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: RCU-free the scheduler-containing nouveau_sched struct nouveau_sched embeds a struct drm_gpu_scheduler (base). nouveau_sched_destroy() calls nouveau_sched_fini() (which does drm_sched_fini(&sched->base)) and then frees the object with plain kfree(sched). drm_sched_fence_get_timeline_name() returns fence->sched->name, and the scheduler fence keeps a .release callback so it is not ops-detached on signalling. A finished fence exported to userspace via drm_syncobj / sync_file therefore keeps pointing at &sched->base after nouveau_sched_destroy(), and a later get_timeline_name() -- reachable unprivileged through SYNC_IOC_FILE_INFO -- dereferences freed memory (KASAN slab-use-after-free read). Per the dma-fence lifetime contract the exporter must keep the data backing a signalled fence alive for an RCU grace period. Free the scheduler-containing object with kfree_rcu() instead of kfree(). | ||||
| CVE-2026-98511 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: don't bump pin count on failed re-pin in nouveau_bo_pin_locked() nouveau_bo_pin_locked() checks whether an already pinned BO is in a memory domain compatible with a new pin request. When the domains are incompatible, it sets -EBUSY but still calls ttm_bo_pin() before returning. Callers treat a failed nouveau_bo_pin() as not having acquired a new pin, so the extra pin count is never decreased by a matching unpin. This triggers the warning in ttm_bo_release(): WARN_ON_ONCE(bo->pin_count); Found when fuzzing the nouveau driver with a modified Syzkaller: WARNING: drivers/gpu/drm/ttm/ttm_bo.c:256 at ttm_bo_release+0x827/0x9e0 drivers/gpu/drm/ttm/ttm_bo.c:256, CPU#1: syz.3.24/2212 Modules linked in: CPU: 1 UID: 0 PID: 2212 Comm: syz.3.24 Not tainted 7.2.0 #24 PREEMPT(lazy) nouveau 0000:01:00.0: gsp:msg fn:103 len:0x40/0x20 res:0x19 resp:0x19 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:ttm_bo_release+0x827/0x9e0 drivers/gpu/drm/ttm/ttm_bo.c:256 Code: 02 00 0f 85 51 01 00 00 48 8b 7b 08 e8 d2 20 01 00 e9 80 fd ff ff e8 d8 15 c0 fe 90 0f 0b 90 e9 e1 f8 ff ff e8 ca 15 c0 fe 90 <0f> 0b 90 e9 a4 f8 ff ff e8 bc 15 c0 fe be 03 00 00 00 4c 89 e7 e8 msg: 00000000: 05 00 d0 c1 04 00 f0 f1 01 30 00 00 2d 90 00 00 .........0..-... RSP: 0018:ffffc9000f5cf710 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff888018e5d2a8 RCX: ffffffff82bb1b36 RDX: ffff888017b68000 RSI: 0000000000000004 RDI: ffff888018e5d2a8 msg: 00000010: 19 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ RBP: ffff88801261c720 R08: 0000000000000001 R09: ffffed10031cba55 R10: ffff888018e5d2ab R11: 00000000000000f3 R12: ffff888018e5d290 R13: ffff888018e5d2d4 R14: ffff88801b219c18 R15: dffffc0000000000 FS: 0000000000000000(0000) GS:ffff8880e0f6f000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b31223ffc CR3: 0000000028e00005 CR4: 0000000000770ef0 PKRU: 80000000 Call Trace: <TASK> kref_put include/linux/kref.h:65 [inline] ttm_bo_put drivers/gpu/drm/ttm/ttm_bo.c:325 [inline] ttm_bo_fini+0x55/0x80 drivers/gpu/drm/ttm/ttm_bo.c:330 nouveau_gem_object_del+0xb2/0x1b0 drivers/gpu/drm/nouveau/nouveau_gem.c:90 drm_gem_object_free+0x5f/0x90 drivers/gpu/drm/drm_gem.c:1165 kref_put include/linux/kref.h:65 [inline] __drm_gem_object_put include/drm/drm_gem.h:562 [inline] drm_gem_object_put include/drm/drm_gem.h:575 [inline] nouveau_abi16_chan_fini.constprop.0+0x44f/0x5a0 drivers/gpu/drm/nouveau/nouveau_abi16.c:195 nouveau 0000:01:00.0: syz.2.23[2209]: Unknown handle 0x00000000 nouveau_abi16_fini+0x1d0/0x340 drivers/gpu/drm/nouveau/nouveau_abi16.c:225 nouveau_drm_postclose+0x18b/0x3e0 drivers/gpu/drm/nouveau/nouveau_drm.c:1284 nouveau 0000:01:00.0: syz.2.23[2209]: validate_init drm_file_free.part.0+0x6d6/0xb60 drivers/gpu/drm/drm_file.c:267 drm_file_free drivers/gpu/drm/drm_file.c:237 [inline] drm_close_helper.isra.0+0x11a/0x160 drivers/gpu/drm/drm_file.c:290 drm_release+0x1ab/0x330 drivers/gpu/drm/drm_file.c:438 __fput+0x39c/0xa60 fs/file_table.c:512 nouveau 0000:01:00.0: syz.2.23[2209]: validate: -2 task_work_run+0x15a/0x230 kernel/task_work.c:233 exit_task_work include/linux/task_work.h:40 [inline] do_exit+0x82b/0x25a0 kernel/exit.c:1009 do_group_exit+0xc2/0x280 kernel/exit.c:1152 get_signal+0x1d6e/0x1f30 kernel/signal.c:3046 arch_do_signal_or_restart+0x7d/0x6e0 arch/x86/kernel/signal.c:337 __exit_to_user_mode_loop kernel/entry/common.c:66 [inline] exit_to_user_mode_loop+0xdf/0x440 kernel/entry/common.c:101 __exit_to_user_mode_prepare include/linux/irq-entry-common.h:207 [inline] syscall_exit_to_user_mode_prepare include/linux/irq-entry-common.h:230 [inline] syscall_exit_to_user_mode include/linux/entry-common.h:318 [inline] do_syscall_64+0x4f8/0x690 arch/x86/entry/syscall_64.c:100 entry_SYSCALL_64_after_hwframe+0x77/0x7f RI ---truncated--- | ||||
| CVE-2026-98508 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/virtio: fix NULL pointer dereference on fence allocation failure virtio_gpu_fence_alloc() can fail due to memory pressure and return NULL, but its caller like virtio_gpu_init_submit() never checks it. Later, virtio_gpu_init_submit() passes the NULL fence to virtio_gpu_fence_event_create(), which unconditionally dereferences it. Found when fuzzing the virtio driver with Syzkaller: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000012: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000090-0x0000000000000097] CPU: 1 UID: 0 PID: 9991 Comm: syz.0.121 Not tainted 7.2.0 #4 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014 RIP: 0010:virtio_gpu_fence_event_create drivers/gpu/drm/virtio/virtgpu_submit.c:295 [inline] RIP: 0010:virtio_gpu_init_submit drivers/gpu/drm/virtio/virtgpu_submit.c:398 [inline] RIP: 0010:virtio_gpu_execbuffer_ioctl+0xc78/0x1aa0 drivers/gpu/drm/virtio/virtgpu_submit.c:505 Code: 85 ed 0f 85 21 09 00 00 e8 05 5a c9 fb 48 8b 44 24 10 48 8d b8 90 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 9a 0d 00 00 48 8b 44 24 10 4c 89 b0 90 00 00 00 RSP: 0018:ffffc900039dfad0 EFLAGS: 00010216 RAX: dffffc0000000000 RBX: ffffc900039dfdd8 RCX: ffffffff85f6fd3d RDX: 0000000000000012 RSI: ffffffff85f6fd4b RDI: 0000000000000090 RBP: 0000000000000000 R0virtio_gpu_virgl_process_cmd: ctrl 0x102, error 0x1203 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8880132c4000 R13: 0000000000000000 R14: ffff888073b6c700 R15: 000000000000003b FS: 00007fab480b96c0(0000) GS:ffff8880eb6e9000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007effbf5e55a8 CR3: 0000000048d19000 CR4: 0000000000350ef0 Call Trace: <TASK> drm_ioctl_kernel+0x1f4/0x3e0 drivers/gpu/drm/drm_ioctl.c:817 drm_ioctl+0x5f4/0xc70 drivers/gpu/drm/drm_ioctl.c:914 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl fs/ioctl.c:583 [inline] __x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:583 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x116/0x800 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fab471a82bd Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fab480b9018 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007fab47435fa0 RCX: 00007fab471a82bd RDX: 00002000000000c0 RSI: 00000000c0406442 RDI: 0000000000000003 RBP: 00007fab480b9080 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001 R13: 00007fab47436038 R14: 00007fab47435fa0 R15: 00007ffe85ab0740 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- RIP: 0010:virtio_gpu_fence_event_create drivers/gpu/drm/virtio/virtgpu_submit.c:295 [inline] RIP: 0010:virtio_gpu_init_submit drivers/gpu/drm/virtio/virtgpu_submit.c:398 [inline] RIP: 0010:virtio_gpu_execbuffer_ioctl+0xc78/0x1aa0 drivers/gpu/drm/virtio/virtgpu_submit.c:505 Code: 85 ed 0f 85 21 09 00 00 e8 05 5a c9 fb 48 8b 44 24 10 48 8d b8 90 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 9a 0d 00 00 48 8b 44 24 10 4c 89 b0 90 00 00 00 RSP: 0018:ffffc900039dfad0 EFLAGS: 00010216 RAX: dffffc0000000000 RBX: ffffc900039dfdd8 RCX: ffffffff85f6fd3d RDX: 0000000000000012 RSI: ffffffff85f6fd4b RDI: 0000000000000090 RBP: 0000000000000000 R08: 0000000000000005 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8880132c4000 R13: 0000000000000000 R14: ffff888073b6c700 R15: 000000000000003b FS: 00007fab480b96c0(0000) GS:ffff888098ae9000(0000) knlGS:00000000 ---truncated--- | ||||
| CVE-2026-98505 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/vaddr: avoid hw-driven pte updates during damon_hugetlb_mkold() damon_hugetlb_mkold() reads the page table entry into a local variable, unsets the accessed bit in the variable, and updates the page table entry with the updated variable value. If hardware updates the same page table entry in parallel, the hw updates could be lost. For example, hardware-updated dirty bits might be lost. Avoid the parallel updates by clearing the page table entry when reading it together, using huge_ptep_get_and_clear(). If a parallel write to the memory is made after the clearing, the hw will see the page table entry is cleared, trigger page fault and wait until it is handled. The page fault handling will wait for damon_hugetlb_mkold() due to the page table lock. Because hugetlbfs is an in-memory file system and hugetlb pages cannot be reclaimed, no critical issue is expected to my best knowledge. But definitely this is a nasty bug that should be fixed sooner rather than later. The issue was discovered [1] by Sashiko. | ||||
| CVE-2026-98503 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: packet: use ubuf_info completion for TX_RING packets tpacket_snd sends skbs with frags pointing into its ring slots. Slots are released when skb->destructor is called. A call to skb_orphan calls skb->destructor before the skb is freed. This can cause the slot to be reused while still linked into the skb. Switch to standard zerocopy completion (ubuf_info) so the slot is only released once all references to the payload are freed or copied. Restore skb->destructor to standard sock_wfree. The ubuf_info completion callback can be called with a NULL skb, but only from net_zcopy_put and related API, used by zerocopy implementations that hold their own reference on the uarg, such as MSG_ZEROCOPY. This uarg is only ever completed from skb_zcopy_clear, so skb is always set. To prevent userspace from aliasing in-flight state on shared ring slots, allocate tpacket_uarg per packet, rather than per slot. This adds a small allocation to the transmit path. Use standard kmalloc to allow backporting to stable kernels. The uarg holds an sk_wmem_alloc reference, rather than an sk_refcnt reference. packet_free_tx_ring waits on sk_wmem_alloc before freeing the ring pages. Always allocate vec->deferred for tx_ring so page-backed rings also wait on sk_wmem_alloc when skb_copy_ubufs drops page refs before calling tpacket_ubuf_complete. Drop the tx_ring.pg_vec test that tpacket_destruct_skb performed before accessing the slot. The sk_wmem_alloc reference now guarantees that the slot is valid. The test is also not sufficient by itself, as it reads pg_vec without pg_vec_lock, so it can race with packet_set_ring. As a result a slot is released when its payload is copied, which can be before transmission (e.g., in skb_orphan_frags_rx). If copied before skb_tx_timestamp() is called, no slot timestamp is recorded, similar to when skb_orphan() was called early in the datapath before this patch. Revert the now unused previous skb_zcopy_.._nouarg infra. Depends on commit 992cc9f94ca9 ("net/packet: defer vmalloc TX_RING free until skbs finish"). | ||||