Export limit exceeded: 26033 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26033 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98039 | 1 Linux | 1 Linux Kernel | 2026-09-29 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Require MEM_PERCPU for percpu kptr stores map_kptr_match_type() treats perm_flags as the set of register type flags that a kptr field permits. Adding MEM_PERCPU to that set for BPF_KPTR_PERCPU does not require the source register to carry it, however. The subset test consequently accepts both a plain bpf_obj_new() allocation and a referenced kernel pointer into a __percpu_kptr map field. Loads from the field are always marked MEM_PERCPU. Consumers then treat the stored value as the cookie returned by bpf_percpu_obj_new(): per-CPU pointer helpers relocate it, and map teardown selects the per-CPU free path. A plain allocation can therefore provide an arbitrary kernel read/write, while a kernel pointer can be relocated into an invalid address or sent through a missing destructor. Require the source MEM_PERCPU flag to match the destination field kind. This preserves valid bpf_percpu_obj_new() stores and rejects both the program-BTF and kernel-BTF variants. | ||||
| CVE-2026-98040 | 1 Linux | 1 Linux Kernel | 2026-09-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Mark the zero register precise for a register-form NULL check check_cond_jmp_op() accepts "if rA <op> rB" as a NULL check for a nullable pointer rA when rB is a scalar known to be zero, lifts PTR_MAYBE_NULL from rA in the corresponding branch and does not mark rB precise. Consider the following program: r0 = bpf_get_prandom_u32(); r6 = 1; /* the r6 == 0 path is explored first */ if (r0 == 0) goto 1f; r6 = 0; 1: r0 = bpf_map_lookup_elem(map, &0); /* absent, NULL at runtime */ if (r0 == r6) goto 2f; /* taken as a NULL check for r0 */ *(u8 *)(r0 + 0); /* verifier: map value; runtime: zero */ 2: return 0; The r6 == 0 path is explored first and the dereference is accepted. The r6 == 1 path is pruned at the checkpoint recorded for (1), so the comparison is never verified with a non-zero r6. At runtime a failed lookup returns NULL, NULL != 1 takes the non-NULL edge and the program dereferences a pointer that is zero. | ||||
| CVE-2026-98042 | 1 Linux | 1 Linux Kernel | 2026-09-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Don't resurrect a scalar id dropped by collect_linked_regs() check_cond_jmp_op() copies the compared registers into env->{false,true}_reg{1,2} before collect_linked_regs() runs and copies those snapshots back into both branch states afterwards. collect_linked_regs() records at most LINKED_REGS_MAX members of a linked registers group in the jump history and calls clear_scalar_id() for every member that does not fit. The compared register is not exempt from that. As a consequence, sync_linked_regs() might adjust ranges for more registers than bpf_bt_sync_linked_regs() can propagate precision to. Collect the linked registers before the snapshots are taken instead. This might lead to some unnecessary clear_scalar_id's, but from previous testing situations with many linked registers are extremely rare. | ||||
| CVE-2026-98105 | 1 Linux | 1 Linux Kernel | 2026-09-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: ethernet: oa_tc6: Improve the error recovery When oversubscribed traffic causes lot of buffer overflow errors, probably due to loss of data chunks, driver fails to find a data chunk with end_valid bit set, before it runs out of sk buffer space. As a result, assert is seen during skb_put. Now, check is made if skb buffer has enough tailroom for the incoming data before accepting. If there is no room, current frame is abandoned and it will start looking for a data chunk with start_valid bit, that is a new frame. SK buffer allocation error is considered as recoverable error. rx_buf_overflow flag is too specific and no longer the only condition this flag is used for. Therefore it is renamed as wait_until_start_valid. This is more appropriate as this flag is used to look for the next data chunk with SV bit set, after failures like buffer overflow, buffer allocation failure, skb pointer validity besides buffer overflow error. Not writing to status0 if it reads 0. | ||||
| CVE-2026-98106 | 1 Linux | 1 Linux Kernel | 2026-09-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/pagemap: Prevent double migration of device pages A device-private folio migrated to system memory by a CPU fault can remain reachable through the raw-PFN eviction path until migration finalization drops the source reference. If eviction selects the same device-private folio during this window, it can attempt to migrate the folio again. The second migration can leave an uncharged folio on an LRU list, causing folio_lruvec_lock_irqsave() to retry indefinitely and resulting in a soft lockup and RCU stall. Mark successfully migrated device-private folios using a low bit of their zone_device_data before migration finalization. Make both CPU-fault and raw-PFN migration paths skip device-private folios carrying this flag. Mask the flag when retrieving the drm_pagemap_zdd pointer and preserve it when a device-private folio is split. Keeping the state on the physical folio also avoids depending on a virtual address that may change before a fault occurs. v2: - Replace the retired-PFN XArray with an embedded bitmap. (Matthew Brost) - Mark every base page covered by a migrated folio so retirement remains valid if the folio is later split. v3: - Store the migrated state in a low bit of zone_device_data instead of adding virtual-range and bitmap tracking to the ZDD. (Matthew Brost) - Mask the flag when retrieving the ZDD and preserve it when splitting a folio. - Drop the pre-existing fixes already covered by Matthew Brost's series: https://patchwork.freedesktop.org/series/171651/ v4: - Advance by the folio size only for migration entries marked with MIGRATE_PFN_COMPOUND. (Sashiko) v5: - Simplify ZDD flag updates and folio iteration. (Matthew Brost) - Skip retired device-private folios in the CPU-fault path. (Matthew Brost) - Preserve flag bits while taking a new ZDD reference for split folios. v6: - Restore MIGRATE_PFN_COMPOUND-aware stepping so non-compound migration entries are processed one at a time. (Sashiko) - Drop the pre-existing fixes already covered by Matthew Brost's series: https://patchwork.freedesktop.org/series/171651/ The lockup was observed as: [10109.860465] watchdog: BUG: soft lockup - CPU#9 stuck for 26s! [kworker/u65:5:6557] [10109.860524] Tainted: [S]=CPU_OUT_OF_SPEC, [O]=OOT_MODULE [10109.860524] Hardware name: ASUS System Product Name/PRIME Z790-P WIFI, BIOS 0812 02/24/2023 [10109.860525] Workqueue: xe_page_fault_work_queue xe_pagefault_queue_work [xe] [10109.860644] RIP: 0010:_raw_spin_unlock_irqrestore+0x57/0x80 [10109.860655] Call Trace: [10109.860655] <TASK> [10109.860657] folio_lruvec_lock_irqsave+0x216/0x220 [10109.860661] ? __pfx_lru_add+0x10/0x10 [10109.860665] folio_batch_move_lru+0xc8/0x450 [10109.860670] ? lock_acquire+0xc4/0x2d0 [10109.860674] ? __folio_batch_add_and_move+0x60/0x2e0 [10109.860677] ? folio_migrate_mapping+0xa6/0x110 [10109.860679] ? folio_migrate_flags+0x13b/0x1b0 [10109.860681] ? __pfx_lru_add+0x10/0x10 [10109.860683] __folio_batch_add_and_move+0xe7/0x2e0 [10109.860685] ? dma_iova_try_alloc+0xb0/0x140 [10109.860689] folio_add_lru+0x64/0x80 [10109.860691] __migrate_device_finalize+0x12c/0x270 [10109.860695] migrate_device_finalize+0x10/0x20 [10109.860698] drm_pagemap_evict_to_ram+0x185/0x370 [drm_gpusvm_helper] [10109.860704] ? drm_pagemap_evict_to_ram+0x96/0x370 [drm_gpusvm_helper] [10109.860709] xe_svm_bo_evict+0x15/0x20 [xe] [10109.860819] ? xe_svm_bo_evict+0x15/0x20 [xe] [10109.860921] xe_bo_move+0x107e/0x1570 [xe] [10109.860992] ? xe_ttm_tt_create+0x168/0x340 [xe] [10109.861059] ? __up_read+0x98/0x2b0 [10109.861061] ? lock_is_held_type+0xa3/0x130 [10109.861067] ttm_bo_handle_move_mem+0xe8/0x1e0 [ttm] [10109.861075] ttm_bo_evict+0x141/0x1c0 [ttm] [10109.861081] ttm_bo_evict_cb+0x9f/0x100 [ttm] [10109.861086] ttm_lru_walk_for_evict+0x84/0x190 [ttm] [10109.861091] ? xe_ttm_vram_mgr_new+0x258/0x3a0 [xe] [10109.861198] ttm_bo_alloc_resource+0x219/0 ---truncated--- | ||||
| CVE-2026-98110 | 1 Linux | 1 Linux Kernel | 2026-09-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel: bound firmware ID by TLV length The firmware ID is treated as a NUL-terminated string even though the TLV length is its only boundary. If the value does not contain a NUL terminator, snprintf() can read beyond the received response. Limit the conversion to the advertised TLV value length. | ||||
| CVE-2026-98118 | 1 Linux | 1 Linux Kernel | 2026-09-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfs: Fix readahead synchronisation issues by loading all folios upfront There are some synchronisation issues that derive from the app thread adding more folios to the rolling buffer whilst the collector thread is looking at them or trying to clear them, such as determining the setting of front_folio_order when the next folio hasn't been added yet, The reason for the rolling buffer approach is that loading the buffer upfront and then dropping all the refs just acquired is quite a slow operation, and loading progressively allows some of the cost to be deferred until after at least some of the I/O is started. Instead, a better way is to load all the folios into the rolling buffer upfront - and then drop the refs later, once the I/O is in progress. (Even better would be for the refs not to be there at all.) Fix this by changing the rolling buffer loader to load all the folios selected by the VM for readahead upfront into the folio queue. The folio queue is allocated a batch worth at a time as we don't know how many folios are involved (the readahead_control struct, alas, has a page count, not a folio count). The folio refs acquired from readahead are then dropped in bulk once the first subrequest is dispatched as it's quite a slow operation. The collector waits for NETFS_RREQ_NEED_PUT_RA_REFS to be cleared so that it doesn't unlock folios before the xarray has been scanned for them. This simplifies the buffer handling later and isn't noticeably slower as the xarray doesn't need to be modified and the folios are all already pre-locked. | ||||
| CVE-2026-97546 | 1 Linux | 1 Linux Kernel | 2026-09-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xfs: don't spin forever on zero-length dirents when salvaging them LOLLM noticed that xrep_dir_recover_data can spin forever if it encounters an unused dirent that claims to have length zero. Fix that, and prevent the same thing from happening with a zero-length entry. | ||||
| CVE-2026-97547 | 1 Linux | 1 Linux Kernel | 2026-09-29 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: xfs: fix exchange-range reflink flag clearing issue with INO1_WRITTEN When exchanging two full-file ranges, xmi_can_exchange_reflink_flags() can move the reflink inode flag from the file that currently has it to the other file, as long as exactly one side is marked. This assumes that the file contents, and therefore all shared extents, are exchanged. That assumption is not true when XFS_EXCHMAPS_INO1_WRITTEN is set. xfs_exchmaps_can_skip_mapping() can skip hole and unwritten mappings from file1, so an exchange can complete without moving every mapping that the earlier flag-swap decision accounted for. In that case the post-operation cleanup can clear the reflink flag from an inode that still owns shared written extents. Later writes then take the non-reflink write path and may update blocks that should still have been protected by CoW, which shows up as data corruption between reflink-related files. Fix this by disabling the reflink flag exchange whenever XFS_EXCHMAPS_INO1_WRITTEN is requested. The contents exchange can still proceed; the conservative outcome is that both inodes keep the reflink flag. The regular reflink flag cleanup path can drop the extra flag later once the inode no longer has shared extents. | ||||
| CVE-2026-97548 | 1 Linux | 1 Linux Kernel | 2026-09-29 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfs: fix the rtrmap and rtrefcount _maxlevels_ondisk functions The _maxlevels_ondisk functions are used to compute the size of in-memory btree cursors for each btree type. Unfortunately, LOLLM noticed that the rtrmap and rtrefcount versions of these functions forget to account for the inode root, which means that we could access beyond the end of the cursor given a sufficiently large btree. Fix this. | ||||
| CVE-2026-97583 | 1 Linux | 1 Linux Kernel | 2026-09-29 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: afs: Clear stale peer app data after address list changes afs_fs_probe_fileserver() fetches the current endpoint state under server->fs_lock, but leaves old_alist as NULL. Consequently, afs_set_peer_appdata() treats every address list replacement as initial setup and only binds the new peers; it never unbinds peers removed from the old list. An address refresh can therefore proceed as follows. CPU 0 replaces server S's list and drops Pold without clearing Pold->app_data. The server destroyer then clears only S's current peers and lets S reach its RCU callback. After the callback frees S, CPU 1 handles a callback through an RxRPC connection that still pins Pold, reads Pold->app_data, and calls afs_use_server() on the freed object. KASAN reported: BUG: KASAN: slab-use-after-free in afs_find_server+0x3c/0xa0 Read of size 4 at addr ffff8881013e1af0 by task krxrpcio/7001/74 Call Trace: afs_find_server+0x3c/0xa0 afs_rx_new_call+0x15c/0x390 rxrpc_new_incoming_call+0x97c/0x1730 rxrpc_input_packet.constprop.0+0xd03/0xec0 rxrpc_io_thread+0x967/0x1640 Allocated by task 93: afs_lookup_server+0x1a7/0x14c0 afs_alloc_server_list+0x43f/0xb60 afs_create_volume+0x923/0x1490 afs_get_tree+0x1c6/0x10a0 Freed by task 0: kfree+0x131/0x3c0 rcu_core+0x50a/0x1850 Last potentially related work creation: __call_rcu_common.constprop.0+0x71/0xa10 afs_put_server+0x213/0x2b0 Preserve old->addresses for the peer app-data update so that removed peers are cleared before the endpoint state is replaced. Also advance both cursors when the old and new lists share a peer; activating the old/new comparison without this would otherwise loop forever on the shared entry. | ||||
| CVE-2026-97584 | 1 Linux | 1 Linux Kernel | 2026-09-29 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: afs: Fix incorrect free in candidate cleanup in afs_lookup_server() Fix afs_lookup_server() to not free an existing server's endpoint state when cleaning up a candidate server. The candidate record doesn't have an endpoint state yet at this point, so the free for that can just be removed. | ||||
| CVE-2026-97585 | 1 Linux | 1 Linux Kernel | 2026-09-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: afs: Fix double-unmap of directory block Fix afs_edit_dir_remove() to use a cleanup function to unmap the block pointed to by afs_dir_iter::block if it's left pointing to something rather than manually kunmapping the blocks. Manually kunmapping without clearing iter.blocks can result in a double-kunmap if afs_dir_find_block() is called twice in a row (which would be the case if the block being modified is not first in the hash chain). | ||||
| CVE-2026-13019 | 4 Esri, Kubernetes, Linux and 1 more | 4 Portal For Arcgis, Kubernetes, Linux Kernel and 1 more | 2026-09-29 | 9.8 Critical |
| Esri Portal for ArcGIS versions 12.1 and earlier on Windows, Linux and Kubernetes have a missing authentication for critical function vulnerability allows a remote, unauthenticated attacker to access an unprotected API. The following versions are known to be affected: Portal for ArcGIS 12.1 and earlier. Other unsupported versions may also be affected. Esri recommends that users apply the Portal for ArcGIS Security 2026 Update 2 Patch to remediate this vulnerability. | ||||
| CVE-2026-65112 | 2 Linux, Nvidia | 3 Linux Kernel, Infra Controller, Infrastructure Controller | 2026-09-29 | 6.5 Medium |
| NVIDIA Infrastructure Controller for Linux contains a vulnerability where an attacker could cause uncontrolled resource consumption. A successful exploit of this vulnerability might lead to denial of service. | ||||
| CVE-2026-65113 | 2 Linux, Nvidia | 3 Linux Kernel, Infra Controller, Infrastructure Controller | 2026-09-29 | 9.8 Critical |
| NVIDIA Infrastructure Controller for Linux contains a vulnerability where an attacker could cause use of hard-coded credentials. A successful exploit of this vulnerability might lead to escalation of privileges, data tampering, denial of service, and information disclosure. | ||||
| CVE-2026-65114 | 2 Linux, Nvidia | 3 Linux Kernel, Infra Controller, Infrastructure Controller | 2026-09-29 | 8.3 High |
| NVIDIA Infrastructure Controller for Linux contains a vulnerability where an attacker could cause missing authentication for a critical function. A successful exploit of this vulnerability might lead to data tampering, denial of service, and information disclosure. | ||||
| CVE-2026-65115 | 2 Linux, Nvidia | 3 Linux Kernel, Infra Controller, Infrastructure Controller | 2026-09-29 | 6.5 Medium |
| NVIDIA Infrastructure Controller for Linux contains a vulnerability where an attacker may cause uncontrolled resource consumption. A successful exploit of this vulnerability may lead to denial of service. | ||||
| CVE-2026-65117 | 2 Linux, Nvidia | 3 Linux Kernel, Infra Controller, Infrastructure Controller | 2026-09-29 | 5 Medium |
| NVIDIA Infrastructure Controller for Linux contains a vulnerability where an attacker could cause use of a hard-coded password. A successful exploit of this vulnerability might lead to data tampering, denial of service, and information disclosure. | ||||
| CVE-2026-65118 | 2 Linux, Nvidia | 3 Linux Kernel, Infra Controller, Infrastructure Controller | 2026-09-29 | 7.5 High |
| NVIDIA Infrastructure Controller for Linux contains a vulnerability where an attacker could cause improper certificate validation. A successful exploit of this vulnerability might lead to information disclosure, data tampering, and denial of service. | ||||