Export limit exceeded: 413160 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (413160 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-18748 | 1 Zephyrproject | 1 Zephyr | 2026-10-22 | 3.5 Low |
| The Bluetooth Classic A2DP host stores a codec Information Element (IE) in struct bt_a2dp_codec_ie, a one-byte len field plus a fixed 8-byte codec_ie[] array. When an AVDTP peer sent a codec IE longer than 8 bytes, a2dp_process_config_ind() in subsys/bluetooth/host/classic/a2dp.c copied only the first 8 bytes but assigned the full, attacker-chosen length to len, and then persisted that inconsistent structure into the application's struct bt_a2dp_stream via stream->codec_config. bt_a2dp_get_config_cb() and bt_a2dp_set_config_cb() had the same truncate-the-copy-but-keep-the-length pattern. Every later consumer trusts len. In particular the responder for an incoming AVDTP GET_CONFIGURATION, a2dp_get_config_ind(), executes net_buf_add_mem(rsp_buf, &ep->stream->codec_config.codec_ie[0], ep->stream->codec_config.len), so a paired BR/EDR peer that first sends a SET_CONFIGURATION carrying an oversized codec IE and then requests the configuration back causes the stack to read up to roughly 245 bytes past the end of the 8-byte array and transmit them in the response. codec_config is the last member of struct bt_a2dp_stream, so the read runs into memory adjacent to the application's stream object. The same inconsistency is also handed to the config_req(), reconfig_req() and get_config_rsp() application callbacks, where a natural memcpy() of len bytes performs a further out-of-bounds read. Reaching the on-air disclosure requires CONFIG_BT_CLASSIC with CONFIG_BT_A2DP, an AVDTP peer that has completed pairing (the AVDTP L2CAP channel requires BT_SECURITY_L2), and a local endpoint registered for a non-SBC codec — BT_A2DP_MPEG1/BT_A2DP_MPEG2/BT_A2DP_ATRAC/BT_A2DP_VENDOR via BT_A2DP_EP_INIT() — because the SBC branch already pins the IE length to 4 bytes. The bt_a2dp_get_config_cb() response path has no such gate and hands the lying length to any application. There is no out-of-bounds write: the net_buf tailroom check bounds the destination, so the impact is limited to disclosure of a bounded region of adjacent RAM to the peer. The fix replaces the hardcoded BT_A2DP_MAX_IE_LENGTH with the configurable CONFIG_BT_A2DP_CODEC_MAX_IE_LEN (default 8, range 4–253), sizes codec_ie[] from it, and rejects any received IE that exceeds it instead of silently truncating, so len can no longer exceed the number of valid bytes. | ||||
| CVE-2026-19947 | 1 Zephyrproject | 1 Zephyr | 2026-10-22 | 5.3 Medium |
| The device multiplexer pseudo-driver in drivers/misc/devmux/devmux.c exposes two system calls, devmux_select_get() and devmux_select_set(). When CONFIG_USERSPACE is enabled, their user-mode verifiers z_vrfy_devmux_select_get() and z_vrfy_devmux_select_set() forwarded directly to the kernel implementations without performing any kernel-object validation — no k_object_access_check() and no driver object check. Compounding this, DEVICE_DT_INST_DEFINE() registered devmux instances with a NULL driver API pointer, which causes scripts/build/gen_kobject_list.py to skip them entirely, so a devmux device had no struct k_object and no permission on it could be granted or withheld in the first place. Any thread running in user mode can reach the defect: device pointers such as DEVICE_DT_GET(DT_NODELABEL(devmux0)) are compile-time constants available to application code, and the syscall accepted them from a thread that had never been granted access to the device. The kernel implementations do validate the pointer against the static devmux instance table and bounds-check the selection index, so this is not a memory-safety issue; the failure is purely one of authorization. Exposure requires CONFIG_USERSPACE=y together with the experimental CONFIG_DEVMUX=y (which depends on CONFIG_DEVICE_MUTABLE) and a zephyr,devmux devicetree node. An unprivileged user-mode thread can read and change which downstream device a multiplexer forwards to, bypassing the userspace object-permission model. Because a devmux forwards the data, configuration and API of the selected device — its documented use being zephyr,console and zephyr,shell-uart switching — an attacker can suppress console, log and shell output, redirect that output to a downstream device it is able to observe, or flip the selection underneath another thread that is legitimately using the multiplexer. The impact is bounded to the devicetree-fixed set of downstream devices; no out-of-bounds access or arbitrary pointer dereference is reachable. The fix declares __subsystem struct devmux_driver_api and attaches a DEVICE_API(devmux, devmux_api) instance to each devmux device so that it becomes a tracked K_OBJ_DRIVER_DEVMUX kernel object, and adds K_OOPS(devmux_inst_get(dev) == SIZE_MAX) plus K_OOPS(k_object_access_check(dev) != 0) to both verifiers. | ||||
| CVE-2026-114501 | 1 Python-pillow | 1 Pillow | 2026-10-22 | N/A |
| Pillow is a Python imaging library. From 11.2.1 until 13.0.0, Arrow export assumes that an image's rows are tightly contiguous and exports from im->blocks[0].ptr even when PILLOW_ALIGNMENT makes aligned_linesize include row padding or an aligned offset before the first row. The resulting Arrow buffer can include uninitialized padding, bytes preceding the first row, or stale heap contents from previously freed images. Applications that configure alignment and export images to Arrow can therefore disclose one user's pixels or other process memory to another user. This issue is fixed in version 13.0.0. | ||||
| CVE-2026-87298 | 1 Oracle | 1 Webcenter Content | 2026-10-22 | 6.5 Medium |
| Vulnerability in the Oracle WebCenter Content product of Oracle Fusion Middleware (component: Content Server). Supported versions that are affected are 12.2.1.4.0 and 14.1.2.0.0. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle WebCenter Content. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle WebCenter Content accessible data. CVSS 3.1 Base Score 6.5 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N). | ||||
| CVE-2026-87309 | 1 Oracle | 1 Jd Edwards Enterpriseone Tools | 2026-10-22 | 8.1 High |
| Vulnerability in the JD Edwards EnterpriseOne Tools product of Oracle JD Edwards (component: Package Build SEC). Supported versions that are affected are 9.2.0.0-9.2.26.5. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise JD Edwards EnterpriseOne Tools. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all JD Edwards EnterpriseOne Tools accessible data and unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of JD Edwards EnterpriseOne Tools. CVSS 3.1 Base Score 8.1 (Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:H/A:H). | ||||
| CVE-2026-87320 | 1 Oracle | 1 Jd Edwards Enterpriseone Tools | 2026-10-22 | 6.7 Medium |
| Vulnerability in the JD Edwards EnterpriseOne Tools product of Oracle JD Edwards (component: E1 Dev Platform Tech - UNIX). Supported versions that are affected are 9.2.0.0-9.2.26.5. Difficult to exploit vulnerability allows low privileged attacker with logon to the infrastructure where JD Edwards EnterpriseOne Tools executes to compromise JD Edwards EnterpriseOne Tools. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in takeover of JD Edwards EnterpriseOne Tools. CVSS 3.1 Base Score 6.7 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:H/PR:L/UI:R/S:U/C:H/I:H/A:H). | ||||
| CVE-2026-87347 | 1 Oracle | 1 Http Server | 2026-10-22 | 9.6 Critical |
| Vulnerability in the Oracle HTTP Server product of Oracle Fusion Middleware (component: OSSL Module). Supported versions that are affected are 12.2.1.4.0 and 14.1.2.0.0. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle HTTP Server. While the vulnerability is in Oracle HTTP Server, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle HTTP Server accessible data as well as unauthorized access to critical data or complete access to all Oracle HTTP Server accessible data. CVSS 3.1 Base Score 9.6 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:N). | ||||
| CVE-2026-87350 | 1 Oracle | 1 Peoplesoft Enterprise Peopletools | 2026-10-22 | 4.5 Medium |
| Vulnerability in the PeopleSoft Enterprise PeopleTools product of Oracle PeopleSoft (component: Security). Supported versions that are affected are 8.61-8.63. Difficult to exploit vulnerability allows low privileged attacker with logon to the infrastructure where PeopleSoft Enterprise PeopleTools executes to compromise PeopleSoft Enterprise PeopleTools. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of PeopleSoft Enterprise PeopleTools accessible data as well as unauthorized read access to a subset of PeopleSoft Enterprise PeopleTools accessible data and unauthorized ability to cause a partial denial of service (partial DOS) of PeopleSoft Enterprise PeopleTools. CVSS 3.1 Base Score 4.5 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:L/I:L/A:L). | ||||
| CVE-2026-87352 | 1 Oracle | 1 Peoplesoft Enterprise Peopletools | 2026-10-22 | 4.4 Medium |
| Vulnerability in the PeopleSoft Enterprise PeopleTools product of Oracle PeopleSoft (component: LDAP). Supported versions that are affected are 8.61-8.63. Easily exploitable vulnerability allows low privileged attacker with logon to the infrastructure where PeopleSoft Enterprise PeopleTools executes to compromise PeopleSoft Enterprise PeopleTools. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of PeopleSoft Enterprise PeopleTools accessible data as well as unauthorized read access to a subset of PeopleSoft Enterprise PeopleTools accessible data. CVSS 3.1 Base Score 4.4 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:N). | ||||
| CVE-2026-87353 | 1 Oracle | 1 Peoplesoft Enterprise Peopletools | 2026-10-22 | 4.5 Medium |
| Vulnerability in the PeopleSoft Enterprise PeopleTools product of Oracle PeopleSoft (component: Porting). Supported versions that are affected are 8.61-8.63. Difficult to exploit vulnerability allows unauthenticated attacker with logon to the infrastructure where PeopleSoft Enterprise PeopleTools executes to compromise PeopleSoft Enterprise PeopleTools. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of PeopleSoft Enterprise PeopleTools accessible data as well as unauthorized read access to a subset of PeopleSoft Enterprise PeopleTools accessible data and unauthorized ability to cause a partial denial of service (partial DOS) of PeopleSoft Enterprise PeopleTools. CVSS 3.1 Base Score 4.5 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:H/PR:N/UI:R/S:U/C:L/I:L/A:L). | ||||
| CVE-2026-87354 | 1 Oracle | 1 Timesten In-memory Database | 2026-10-22 | 4.3 Medium |
| Vulnerability in Oracle TimesTen In-Memory Database (component: Kubernetes Operator). Supported versions that are affected are 22.1-22.1.40.0 and 26.1-26.1.1.2.0. Easily exploitable vulnerability allows low privileged attacker with network access via HTTPS to compromise Oracle TimesTen In-Memory Database. Successful attacks of this vulnerability can result in unauthorized read access to a subset of Oracle TimesTen In-Memory Database accessible data. CVSS 3.1 Base Score 4.3 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:N). | ||||
| CVE-2026-87356 | 1 Oracle | 1 Applications Platform Engineering | 2026-10-22 | 7.8 High |
| Vulnerability in the Applications Platform Engineering product of Oracle E-Business Suite (component: Valid Session). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows low privileged attacker with logon to the infrastructure where Applications Platform Engineering executes to compromise Applications Platform Engineering. Successful attacks of this vulnerability can result in takeover of Applications Platform Engineering. CVSS 3.1 Base Score 7.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H). | ||||
| CVE-2026-113790 | 1 Py-pdf | 1 Pypdf | 2026-10-22 | N/A |
| pypdf is a free and open-source pure-python PDF library. Prior to 6.21.0, an attacker can craft a PDF containing arrays or dictionaries with many elements, causing parsing to consume large amounts of memory. This issue is fixed in version 6.21.0. | ||||
| CVE-2026-114664 | 1 Frappe | 1 Frappe | 2026-10-22 | 7.1 High |
| Frappe Framework before 16.33.0 contains a blind SQL injection vulnerability in the frappe.desk.doctype.event.event.get_events method, which fails to properly neutralize user-supplied input before including it in SQL queries. Authenticated attackers can send crafted input to get_events and infer query results from application behavior to extract sensitive database information. | ||||
| CVE-2026-114663 | 1 Vyperlang | 1 Vyper | 2026-10-22 | 8.4 High |
| Vyper 0.4.0b1 through 0.5.0b1 miscompiles unfoldable constants and omitted default arguments from imported modules, because parse_Name resolves their names in the using function's scope rather than at declaration. When a contract's parameter, local, or loop variable shares such a name, attacker-influenced input can replace the intended value, including out-of-range values for narrow types such as uint8, corrupting validation or accounting logic. | ||||
| CVE-2026-114661 | 1 Openremote | 1 Openremote | 2026-10-22 | 8.5 High |
| OpenRemote 1.2.0 before 1.31.0 contains a missing authorization vulnerability in GatewayServiceResource that allows any authenticated user to start, stop and query gateway tunnels without an administrative role. Attackers can send POST or DELETE requests to the gateway tunnel endpoint to open persistent bidirectional TCP circuits into an edge gateway's network or tear down operator tunnels. | ||||
| CVE-2026-114660 | 1 Getgrav | 1 Grav | 2026-10-22 | 6.3 Medium |
| Grav from 2.0.0 before 2.2.5 contains an improper access control vulnerability in FlexDirectory::dynamicFlexField() that allows page authors to call arbitrary Flex object methods via flex-*@ directives in page frontmatter. When a user with page edit rights opens the page, directives calling setStorageKey() and delete() run in their session, deleting protected pages neither account may delete. | ||||
| CVE-2026-114657 | 1 Getgrav | 1 Grav | 2026-10-22 | 5.7 Medium |
| Grav from 2.0.0 before 2.2.5 contains an information disclosure vulnerability that allows page authors to capture visitors' HTTP Basic credentials through Twig page content. Authors can print the request Uri object, which embeds PHP_AUTH_USER and PHP_AUTH_PW, inside an inline style background image to exfiltrate administrators' credentials to an external host. | ||||
| CVE-2026-114656 | 1 Traefik | 1 Traefik | 2026-10-22 | 7.5 High |
| Traefik before 2.11.58 and 3.7.13 contains an authentication bypass vulnerability that allows unauthenticated clients to skip client-certificate checks because negated Host matchers are counted as served domains. Attackers can reach backends protected by RequireAndVerifyClientCert when a router rule with !Host() creates a TLS options conflict that falls back to the default options. | ||||
| CVE-2026-114642 | 1 Traefik | 1 Traefik | 2026-10-22 | 8.7 High |
| Traefik 2.11.0 before 2.11.58 and 3.0.0 before 3.7.14 stores its NTLM/Kerberos backend round tripper in a client-connection slot not keyed by ServersTransport, so one service's TLS client configuration is reused for another service's backend. An unauthenticated client can arm the slot via a backend issuing an NTLM or Negotiate challenge, then reach another service on the same keep-alive connection, bypassing its root CAs, server name, and certificate verification. | ||||