Export limit exceeded: 413957 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 25940 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25940 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98247 | 1 Linux | 1 Linux Kernel | 2026-10-06 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_codec: validate vendor codec count length The Read Local Supported Codecs parsers consume the variable-sized standard codec array before parsing the vendor codec count. Although the initial reply-size check includes a vendor count byte in the fixed layout, it does not guarantee that the byte remains after the standard codec array. If a controller reply ends immediately after that array, calculating the vendor codec array size reads vnd_codecs->num beyond the skb data. Use skb_pull_data() to validate and consume each codec header before using its count in both command variants. | ||||
| CVE-2026-98222 | 1 Linux | 1 Linux Kernel | 2026-10-06 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: KEYS: encrypted: fix integer overflow of datablob_len encrypted_key_alloc() stores datablob_len in a u16. It is computed from multiple string and payload lengths. If the result exceeds U16_MAX, the assignment truncates the allocation size. KASAN reports a 32760-byte slab-out-of-bounds write when __ekey_init() copies the master key description into the undersized buffer. The total payload length stored in key->datalen is also a u16. Use check_add_overflow() to reject values that do not fit either destination, and use kzalloc_flex() for the flexible-array allocation. | ||||
| CVE-2026-98182 | 1 Linux | 1 Linux Kernel | 2026-10-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: refuse to make a monitor active when it has no queue A monitor interface only gets a TXQ if it's created active, and one can't be added later. Setting the flag on a down interface is still allowed, so the driver is handed a monitor with no queue. ath9k dereferences it: BUG: kernel NULL pointer dereference, address: 0000000000000066 RIP: 0010:ath_tx_node_init+0x49/0x170 [ath9k] ath9k_add_interface+0x10c/0x140 [ath9k] drv_add_interface+0x54/0x250 [mac80211] ieee80211_do_open+0x32f/0x800 [mac80211] Reached with CAP_NET_ADMIN by "iw dev X set monitor active" followed by "ip link set X up". RTNL is held, so netlink operations block behind it. Refuse the flag when there is no queue to give. | ||||
| CVE-2026-98183 | 1 Linux | 1 Linux Kernel | 2026-10-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: avoid out-of-bounds read for empty PREQ elements ieee80211_mesh_preq_size_ok() derives the location of the PREQ bottom fields before checking whether the element contains even the fixed header. ieee80211_mesh_hwmp_preq_get_bottom() reads the flags byte to account for the optional Address Extension field. Consequently, an empty PREQ element causes a one-byte read beyond its declared payload. Move the helper call after both size checks, so the bottom fields are only accessed when they are present. | ||||
| CVE-2026-98187 | 1 Linux | 1 Linux Kernel | 2026-10-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: p54: require a full exp_if record in PDR_INTERFACE_LIST The PDR_INTERFACE_LIST loop only checks that the record start is within the entry before reading an entire struct exp_if from it. A truncated trailing record makes the if_id/variant reads cross the entry boundary into the heap beyond the EEPROM buffer (verified with a KASAN reproducer of the loop). The variant also feeds the synth front-end selection, so this is not only a leak. Advance only while a full record still fits in the entry. | ||||
| CVE-2026-98204 | 1 Linux | 1 Linux Kernel | 2026-10-06 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Input: rmi_smbus - fix out-of-bounds read in rmi_smb_write_block() When chunking writes into SMBus blocks in rmi_smb_write_block(), the loop calculates block_len using the original total length (len) instead of the remaining length (cur_len). If len is greater than 32 bytes (SMB_MAX_COUNT), block_len remains 32 for every iteration, even on the final partial chunk where fewer than 32 bytes remain. This causes smb_block_write() to read 32 bytes from the advanced data buffer pointer, reading past the end of the input buffer. Fix this by calculating block_len using cur_len and advancing the buffer and address pointers by block_len. | ||||
| CVE-2026-70341 | 3 Apple, Linux, Microsoft | 5 Macos, Linux Kernel, Edge and 2 more | 2026-10-06 | 8.5 High |
| Use after free in Microsoft Edge (Chromium-based) allows an authorized attacker to execute code over a network. | ||||
| CVE-2026-98196 | 1 Linux | 1 Linux Kernel | 2026-10-06 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: brcmsmac: fix UAF in brcms_free_timer() brcms_free_timer() calls brcms_del_timer() which uses the non-synchronous cancel_delayed_work() to cancel the timer's underlying delayed work. If the work callback (_brcms_timer) is already running, cancel_delayed_work() returns false without waiting, and brcms_free_timer() proceeds to kfree(t) while the callback still accesses t through container_of(). Add an explicit cancel_delayed_work_sync() after brcms_del_timer() to guarantee that any in-flight callback has completed before the timer structure is freed. | ||||
| CVE-2026-98202 | 1 Linux | 1 Linux Kernel | 2026-10-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Input: synaptics-rmi4 - fix GPF in suspend and resume when unbound Transport drivers (such as rmi_i2c and rmi_spi) invoke rmi_driver_suspend() and rmi_driver_resume() on their child rmi_dev device during system power management events. However, transport drivers are fully registered and operational even if the physical RMI driver failed to bind or probe the rmi_dev device. When rmi_driver_suspend() or rmi_driver_resume() is called on an unbound rmi_dev, dev_get_drvdata() returns NULL. Calling rmi_disable_irq() or rmi_enable_irq() without driver data attached causes a NULL pointer dereference and General Protection Fault when attempting to lock data->enabled_mutex. Fix this by checking if driver data is attached to rmi_dev in rmi_driver_suspend() and rmi_driver_resume(), exiting early if no driver data is present. | ||||
| CVE-2026-98232 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: core: Validate MODE SENSE lengths in scsi_cdl_enable() scsi_cdl_enable() uses length fields returned by MODE SENSE to locate the ATA feature mode page in a 64-byte stack buffer. A target can report a total length shorter than its mode header and block descriptors. The unsigned subtraction used for the MODE SELECT length can wrap, and the separately computed buf_data can point beyond buf. During automatic scan, enable is false, so the read-modify-write of buf_data[4] can clear the low two bits of a target-selected out-of-bounds stack byte. scsi_mode_select() can then copy up to 64 bytes from outside the buffer into the outgoing MODE SELECT payload, disclosing stack contents to the target. This is reachable while scanning a USB storage device that identifies as an ATA device and advertises CDL support. No filesystem mount or userspace access to the block device is required. On upstream commit cee9395acd80 ("Linux 7.3-rc1"), a build-specific, one-vCPU QEMU/Raw Gadget proof using QEMU-only multi-UDC allocator sampling executed a fixed proof command inside the guest and created a UID-0-owned marker during automatic enumeration, with KASLR and NX enabled. The issue was independently found during security research at Drivesec S.r.l. Cap the available length to the buffer size. Validate and consume the mode header and block descriptor lengths before using the page, and require the five bytes needed to access the CDL field. | ||||
| CVE-2026-98054 | 1 Linux | 1 Linux Kernel | 2026-10-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: avs: Fix unbalanced module reference count strace_open() invokes try_module_get() which on success takes the module reference. If any follow up operation causes strace_open() to fail, the refcount shall be put down. | ||||
| CVE-2026-98082 | 1 Linux | 1 Linux Kernel | 2026-10-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix the possible bioc_list memory leak during error There are two possible ways to leak bioc memory on btrfs_ordered_extent::bioc_list: - An error occurred for btrfs_insert_one_raid_extent() Then the function btrfs_insert_raid_extent() immediately return without freeing any bioc in the bioc_list. - An ordered extent hit an IO error In that case the ordered extent will have BTRFS_ORDERED_IOERR set, and skip the call on btrfs_insert_raid_extent() completely. Fix the problem by: - Introduce a new helper, btrfs_cleanup_ordered_bioc_list() Which will remove all bioc from the bioc_list, and release the bioc. - Call the above helper for btrfs_insert_raid_extent() So that the cleanup helper is always called no matter what. - Call the above helper for btrfs_finish_one_ordered() This is called just before the final release on the ordered extent. This was reported by Sashiko when reviewing another patch. | ||||
| CVE-2026-98083 | 1 Linux | 1 Linux Kernel | 2026-10-06 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix transaction use-after-free in raid stripe insertion If allocation of a RAID stripe extent fails, btrfs_insert_one_raid_extent() aborts and ends the transaction before returning -ENOMEM. btrfs_finish_one_ordered(), the production caller through btrfs_insert_raid_extent(), still owns the transaction handle. It handles the error by aborting the transaction and then reaches the common exit path, which ends the transaction again. The premature end can free the handle and drop its transaction reference. Transaction cleanup can then free the transaction before the caller's second abort accesses the handle and transaction, resulting in use-after-free. Keep the abort at the failure site, but let the caller's common exit path end the transaction once, after it has finished using both objects. | ||||
| CVE-2026-98052 | 1 Linux | 1 Linux Kernel | 2026-10-06 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: bcmasp: clear txcb->last before writing each descriptor bcmasp_xmit() only wrote txcb->last = true for the final fragment of an SKB; non-final fragments left the field untouched. If a descriptor slot was reused while it still held a stale true from a previous SKB (possible when tx_spb_ring_full() underreported fullness), bcmasp_tx_reclaim() would see last == true mid-SKB and call dev_consume_skb_any() prematurely, freeing the sk_buff while its remaining fragments were still in flight. Unconditionally clear txcb->last before the conditional set so every descriptor slot starts from a known false state regardless of what a prior transmission left behind. | ||||
| CVE-2026-98051 | 1 Linux | 1 Linux Kernel | 2026-10-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: bcmasp: fix tx_spb_ring_full() checking same slot cnt times The loop initialised next_index from intf->tx_spb_index on every iteration, so incr_ring() always produced the same result and only one slot was ever tested. Move the initialisation before the loop so each iteration advances next_index and the function correctly checks that cnt consecutive descriptor slots are available before allowing a new transmission. | ||||
| CVE-2026-98050 | 1 Linux | 1 Linux Kernel | 2026-10-06 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum_ptp: Fix napi_gro_receive() call from GC workqueue context Currently mlxsw_sp1_ptp_ht_gc_collect() is run from the PTP garbage-collection workqueue, rather than the NAPI poll context. For any unmatched PTP entries carrying an SKB, it calls mlxsw_sp1_ptp_unmatched_finish() -> mlxsw_sp1_ptp_packet_finish(). For ingress packets, this calls mlxsw_sp_rx_listener_no_mark_func(). The end of that function is the following: skb->protocol = eth_type_trans(skb, skb->dev); napi_gro_receive(mlxsw_skb_cb(skb)->rx_md_info.napi, skb); The napi pointer is one that was placed in the SKB control block when the trapped packet was received in the NAPI context. Later, when the GC reaps the unmatched entry (up to MLXSW_SP1_PTP_HT_GC_TIMEOUT later), the call to napi_gro_receive() mutates the NAPI instance's GRO list, which is unsafe if the poll is running concurrently on another CPU. In mlxsw_sp1_ptp_ht_gc_collect(), local_bh_disable() is called to prevent softirq processing, but this only applies to the local CPU. Additionally, its comment is stale. It states that mlxsw_sp1_ptp_unmatched_finish() invokes netif_receive_skb(). This has not been accurate since the referenced commit; this patch makes that comment accurate again. mlxsw_pci_napi_devs_init() calls netif_threaded_enable() on the NAPI RX net_device without any conditions. The NAPI instance's poll, which may be running concurrent to the GC, is running as an independently-scheduled kthread which may be on a different CPU. The call to local_bh_disable() does not guard against this. If a tx-timestamp timeout produces an unmatched entry (which can be easily reproduced by running ptp4l and waiting for a port to reach the UNCALIBRATED/SLAVE state) while the owning NAPI thread is in the middle of a poll on another CPU, both sides mutate the GRO list concurrently, as shown below: [39.846] port 1 (swp1): MASTER to UNCALIBRATED on RS_SLAVE list_add corruption. next->prev should be prev (ffff8d620faf4138), but was ffff8d624150f700. (next=ffff8d620faf4138). kernel BUG at lib/list_debug.c:29! Oops: invalid opcode: 0000 [#1] SMP PTI CPU: 1 UID: 0 PID: 539 Comm: napi/mlxsw_rx-0 Not tainted 6.18.48 #1-NixOS PREEMPT(lazy) Hardware name: Mellanox Technologies Ltd. MSN2410/VMOD0001, BIOS 4.6.5 09/13/2018 RIP: 0010:__list_add_valid_or_report+0x79/0xb0 RSP: 0018:ffffcdf8c0f27c08 EFLAGS: 00010246 RAX: 0000000000000075 RBX: ffff8d624150fd00 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8d6315d1e540 RBP: ffff8d620faf4070 R08: 0000000000000000 R09: 00000000ffffdfff R10: ffffffffa5c60fe0 R11: ffffcdf8c0f27ab8 R12: 0000000000000003 R13: 000000000000003d R14: 00000000000001bc R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff8d636f63f000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000562689a60c24 CR3: 000000015f224004 CR4: 00000000001726f0 Call Trace: <TASK> gro_receive_skb+0xee/0x230 mlxsw_sp1_ptp_got_packet+0x61/0x140 [mlxsw_spectrum] mlxsw_core_skb_receive+0xdf/0x1b0 [mlxsw_core] mlxsw_pci_napi_poll_cq_rx+0x780/0x9d0 [mlxsw_pci] __napi_poll+0x31/0x1e0 napi_threaded_poll_loop+0x16b/0x1c0 napi_threaded_poll+0x71/0xa0 kthread+0xfb/0x260 ret_from_fork+0x22d/0x260 ret_from_fork_asm+0x1a/0x30 </TASK> Kernel panic - not syncing: Fatal exception in interrupt The machinery that leads to this kernel panic has not been changed between 6.18.48 and mainline. This patch adds an ingress-delivery helper for the PTP packet_finish() path that calls netif_receive_skb() instead of napi_gro_receive(). netif_receive_skb(), unlike napi_gro_receive(), can be called from outside of the NAPI instance's poll context, which can occur at the call site for this path. RX stats accounting and the skb->dev assignment are still preserved; the only change is the delivery call itself. This removes GR ---truncated--- | ||||
| CVE-2026-64041 | 1 Linux | 1 Linux Kernel | 2026-10-05 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: fs210x: fix possible buffer overflow In fs210x_effect_scene_info(), a string was copied like this: strscpy(DST, SRC, strlen(SRC) + 1); A buffer overflow would happen if strlen(SRC) >= sizeof(DST). Actually, strscpy() must be used this way: strscpy(DST, SRC, sizeof(DST)); strscpy(DST, SRC); // defaults to sizeof(DST) | ||||
| CVE-2026-64042 | 1 Linux | 1 Linux Kernel | 2026-10-05 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: vfio/pci: Check BAR resources before exporting a DMABUF A DMABUF exports access to BAR resources and, although they are requested at startup time, we need to ensure they really were reserved before exporting. Otherwise, it's possible to access unreserved resources through the export. Add a check to the DMABUF-creation path. | ||||
| CVE-2026-64043 | 1 Linux | 1 Linux Kernel | 2026-10-05 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ovpn: fix race between deleting interface and adding new peer While deleting an existing ovpn interface, there is a very narrow window where adding a new peer via netlink may cause the netdevice to hang and prevent its unregistration. It may happen during ovpn_dellink(), when all existing peers are freed and the device is queued for deregistration, but a CMD_PEER_NEW message comes in adding a new peer that takes again a reference to the netdev. At this point there is no way to release the device because we are under the assumption that all peers were already released. Fix the race condition by releasing all peers in ndo_uninit(), when the netdevice has already been removed from the netdev list. Also ovpn_peer_add() has now an extra check that forces the function to bail out if the device reg_state is not REGISTERED. This way any incoming CMD_PEER_NEW racing with the interface deletion routine will simply stop before adding the peer. Note that the above check happens while holding the netdev_lock to prevent racing netdev state changes. ovpn_dellink() is now empty and can be removed. | ||||
| CVE-2026-93288 | 1 Linux | 1 Linux Kernel | 2026-10-05 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_log: wait for rcu grace period before freeing pernet state sashiko reports: "nfnl_log_net_exit() calls nf_log_unset(), which clears the logger pointer without an RCU grace period. Immediately after, ops_free_list() frees the per-net state while concurrent packets might still be executing nf_log_packet() under rcu_read_lock()." Clear the pointer via .pre_exit to make sure rcu readers have completed before pernet storage is free'd. The change in nf_log_syslog.c is only done for consistency: it doesn't use pernet data. | ||||