Export limit exceeded: 409964 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 409964 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (409964 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98722 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mtd: block2mtd: Fix divide error when erase_size is zero The erase size is parsed from the "block2mtd" module parameter and can be set to zero. add_device() then evaluates if (size % erase_size) with a zero divisor, which triggers a divide error: divide error: 0000 [#1] PREEMPT SMP PTI RIP: 0010:add_device drivers/mtd/devices/block2mtd.c:296 [inline] RIP: 0010:block2mtd_setup2+0x592/0xda0 drivers/mtd/devices/block2mtd.c:459 Call Trace: block2mtd_setup+0x27/0xe0 drivers/mtd/devices/block2mtd.c:476 param_attr_store+0x214/0x310 kernel/params.c:589 module_attr_store+0x65/0x90 kernel/params.c:904 kernfs_fop_write_iter+0x3a4/0x540 fs/kernfs/file.c:345 ... Reject a zero erase size before performing the modulo operation so the existing "erasesize must be a divisor of device size" error path reports the invalid argument and frees the device. | ||||
| CVE-2026-98719 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Nullify "have run CPUs" mask pointer when freeing it Nullify have_run_cpus when freeing the mask, particularly in the error path of __sev_guest_init(), so that KVM doesn't have to subtly use sev->active to track whether or not the mask has been freed. As pointed out by Sashiko, blindly freeing the mask in sev_vm_destroy() results in a double-free if the mask is freed if __sev_guest_init() fails. Throw the logic in a helper as nullifying the pointer is frustratingly difficult and weird due to have_run_cpus being a single-entry array when CPUMASK_OFFSTACK=n. Deliberately don't use CPUMASK_VAR_NULL, as it's not directly assignable when the cpumask is on-stack, e.g. requires using a local variable and a memcpy(), which is beyond ridiculous. Furthermore, while clearing the on-stack bitmask is an unnecessary and arguably unwanted side effect, KVM absolutely relies on '0' being the "null" value given that the struct is zero-allocated. Opportunistically add an alloc() helper to pair with free(); there are just enough call sites to make doing so worthwhile. | ||||
| CVE-2026-98714 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Update control fields on #VMEXIT if and only if VMRUN succeeded Leave control.erap_ctl and control.clean as-is in the VMCS if VMRUN fails, because as per AMD: there's no explicit architectural guarantee about the behavior in the presence of VMRUN failures. So the best thing to do would be to assume that if VMRUN fails, the actions requested in the control fields may not have been performed. | ||||
| CVE-2026-98710 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlegacy: 3945: free EEPROM data on remove il3945_pci_probe() calls il_eeprom_init(), which allocates memory for the EEPROM data. The probe failure paths release this allocation with il_eeprom_free(), but the remove path does not free it after a successful probe. As a result, the EEPROM data is leaked when the PCI device is removed. Free the EEPROM data in il3945_pci_remove() before releasing the mac80211 hardware structure. This issue was found by manual code inspection. | ||||
| CVE-2026-98705 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: account proxy paths against the mesh path limit Proxy-path churn can drive the interface path counter negative and let later mesh path additions exceed MESH_MAX_MPATHS. mesh_path_free_rcu() decrements the interface mpaths counter for entries from both the mesh and proxy path tables, but mpp_path_add() never reserves a slot in that counter. Removing or expiring a proxy path therefore returns a slot that was never charged. mesh_path_add() uses the same counter to enforce MESH_MAX_MPATHS, so once it falls below the number of installed paths the limit no longer holds. Reserve the shared quota before allocating a proxy path and release it on every unsuccessful addition. Mesh and proxy paths now share one 1024-entry budget, so mpp_path_add() can return -ENOSPC at that limit. | ||||
| CVE-2026-98704 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: keep fallback association elements alive Associating to a non-transmitted MBSSID profile reads freed memory while determining the operating channel and applying HT capabilities. When an association response omits WMM, HT, or VHT information, ieee80211_assoc_config_link() parses the cached BSS IEs and copies the missing element pointers out of that fallback parse. For a non-transmitted MBSSID profile those pointers refer to merged-profile storage owned by the parse object, and the fallback block frees that object at its end. The copied pointers are used afterwards to determine the operating channel, configure bandwidth, and apply HT capabilities. Keep the fallback parse result alive until association setup finishes. [reorder variable declaration] | ||||
| CVE-2026-98703 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: minstrel_ht: validate fixed rate index The fixed_rate_idx debugfs file is a plain u32 attribute, so any value can be written to it. minstrel_ht_update_stats() then copies the value into mi->max_tp_rate[] and mi->max_prob_rate, and minstrel_ht_set_rate() uses MI_RATE_GROUP()/MI_RATE_IDX() to index minstrel_mcs_groups[] (42 entries) and mi->groups[].rates[] (10 entries) with it. Writing e.g. 65535 selects group 4095 and rate index 15, far outside both arrays. The out-of-bounds entries are dereferenced and updated as struct minstrel_rate_stats (retry counts, etc.), so the invalid index corrupts adjacent kernel memory. With CONFIG_UBSAN_BOUNDS the access is reported as an array-index-out-of-bounds in minstrel_ht_set_rate(). Only a valid group/rate pair, or U32_MAX to disable fixed rate processing, can be used safely, so reject any other value when the debugfs file is written. The file is only reachable through a root-only debugfs mount, so this is not a privilege boundary. The out-of-bounds access is still a bug that must not be reachable through a writable debugfs attribute. | ||||
| CVE-2026-98702 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: reject invalid 320 MHz CSA bandwidth The HT/VHT channel definition validator can receive a 320 MHz bandwidth indication from a received CSA frame on a non-6 GHz link. It warns for this unsupported width but continues with an uninitialized vht_operation.chan_width, which is then read by ieee80211_chandef_vht_oper(). With panic_on_warn enabled, this lets a received frame panic the kernel. Reject the channel definition before entering the VHT operation conversion. This preserves the existing CSA fallback while avoiding both the warning and the uninitialized read. | ||||
| CVE-2026-98700 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: set info->band for 802.3 encap offload frames Unlike the 802.11 TX paths, ieee80211_8023_xmit() does not set info->band from the channel context on non-MLD interfaces. It stays at 0, so ieee80211_get_tx_rates() uses the wrong band for these frames. Set it the same way as ieee80211_build_hdr(): drop the frame if there is no channel context, and leave the band at 0 on MLD interfaces. | ||||
| CVE-2026-98695 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: USB: serial: fix ioctl hangup race The tty ioctls can race with hangup and end up calling into a tty driver for a device that is already gone or powered down. Serialise the callbacks using the tty port mutex and add the missing checks to make sure the port has not been hung up before accessing port driver data or hardware. This specifically avoids dereferencing a NULL-pointer if a device is disconnected during lengthy break signalling. Note that TIOCGICOUNT and TIOCMIWAIT do not access port driver data or hardware and are therefore not affected by the race. | ||||
| CVE-2026-98694 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Fix KASAN reported use-after-free when request is canceled Alan reported that when doing stress testing sometimes KASAN notices use-after-free during control channel operation (stripped down keeping the relevant parts): BUG: KASAN: slab-use-after-free in tb_cfg_request_sync+0x240/0x250 [thunderbolt] Read of size 24 at addr ffff88811067f290 by task kworker/u40:2/1760 <TASK> tb_cfg_request_sync+0x240/0x250 [thunderbolt] tb_cfg_read_raw+0x367/0x510 [thunderbolt] tb_cfg_read+0xec/0x240 [thunderbolt] tb_port_get_link_generation+0x258/0x420 [thunderbolt] tb_usb3_consumed_bandwidth+0x1c1/0x2c0 [thunderbolt] tb_tunnel_consumed_bandwidth+0xfd/0x910 [thunderbolt] tb_available_bandwidth+0x5f2/0xeb0 [thunderbolt] tb_recalc_estimated_bandwidth+0x2a0/0x1bc0 [thunderbolt] tb_handle_dp_bandwidth_request+0x1897/0x5e20 [thunderbolt] process_one_work+0x675/0x1230 worker_thread+0x5e6/0xf70 kthread+0x365/0x470 ret_from_fork+0x54d/0x710 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 1760: __kmalloc_cache_noprof+0x1ee/0x550 tb_cfg_read_raw+0x1d3/0x510 [thunderbolt] tb_cfg_read+0xec/0x240 [thunderbolt] tb_port_get_link_generation+0x258/0x420 [thunderbolt] tb_usb3_consumed_bandwidth+0x1c1/0x2c0 [thunderbolt] tb_tunnel_consumed_bandwidth+0xfd/0x910 [thunderbolt] tb_available_bandwidth+0x5f2/0xeb0 [thunderbolt] tb_recalc_estimated_bandwidth+0x2a0/0x1bc0 [thunderbolt] tb_handle_dp_bandwidth_request+0x1897/0x5e20 [thunderbolt] process_one_work+0x675/0x1230 worker_thread+0x5e6/0xf70 kthread+0x365/0x470 ret_from_fork+0x54d/0x710 ret_from_fork_asm+0x1a/0x30 Freed by task 926: kfree+0x18f/0x4a0 tb_cfg_request_put+0xb7/0xe0 [thunderbolt] tb_cfg_request_work+0x82/0x120 [thunderbolt] process_one_work+0x675/0x1230 worker_thread+0x5e6/0xf70 kthread+0x365/0x470 ret_from_fork+0x54d/0x710 ret_from_fork_asm+0x1a/0x30 Second to last potentially related work creation: __queue_work+0x575/0xd00 queue_work_on+0x77/0x80 tb_cfg_request_cancel+0xc7/0x260 [thunderbolt] tb_cfg_request_sync+0x1f6/0x250 [thunderbolt] tb_cfg_read_raw+0x367/0x510 [thunderbolt] tb_cfg_read+0xec/0x240 [thunderbolt] tb_port_get_link_generation+0x258/0x420 [thunderbolt] tb_usb3_consumed_bandwidth+0x1c1/0x2c0 [thunderbolt] tb_tunnel_consumed_bandwidth+0xfd/0x910 [thunderbolt] tb_available_bandwidth+0x5f2/0xeb0 [thunderbolt] tb_recalc_estimated_bandwidth+0x2a0/0x1bc0 [thunderbolt] tb_handle_dp_bandwidth_request+0x1897/0x5e20 [thunderbolt] process_one_work+0x675/0x1230 worker_thread+0x5e6/0xf70 kthread+0x365/0x470 ret_from_fork+0x54d/0x710 ret_from_fork_asm+0x1a/0x30 The last stack trace is helpful because it shows that we are cancelling a request and looking at tb_cfg_request_cancel() what might happen is that tb_cfg_request_work() completes right before tb_cfg_request_cancel() starts and because of this it will call schedule_work() queueing the same work to run again. However, it is already removed from the request_queue and reference count is dropped so when tb_cfg_request_work() triggers again it will access memory that is already released. Fix this so that we first make sure a cancelled request is not handed away from tb_cfg_request_find() or scheduled to run. Then instead of relying on the worker to clean up the request we will do it in tb_cfg_request_cancel() after the work is canceled from running. Make tb_cfg_request_dequeue() release the request only if it was actually removed from the queue. | ||||
| CVE-2026-98691 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Tear down inactive DP tunnels when the domain is stopped tb_stop() only tears down DMA tunnels so a DP tunnel that is still waiting for dprx_work to complete keeps that work queued while the routers are removed and the control channel is stopped. The work only stops once the DPRX timeout has passed and because it requeues itself until then the flush_workqueue() in tb_domain_remove() won't wait for its final run. The callback then runs against a domain that is already torn down. A reference to that domain is kept so the completion waiting for that domain to disappear in unbind will block until the timeout is eventually reached. Tear down DP tunnels that are not active yet as well which also cancels that work. Tunnels for displays that are already alive are untouched and keep working. | ||||
| CVE-2026-98689 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Don't access a DP tunnel after its DPRX read was canceled tb_dp_dprx_work() checks ->dprx_canceled before it takes tb->lock so it misses a tb_dp_dprx_stop() that could not cancel the already running work. It then polls the DPRX capabilities and runs the callback for a tunnel that has already been torn down while the domain is suspending or going away. This can be hit by cancelling the DPRX read from outside the ordered tb->wq: During suspend tb_disconnect_and_release_dp() does just this and with a later patch tb_stop() will do it as well. The latter in combination with the Apple NHI where the DPRX read never completed is how I hit this. Check the flag with tb->lock held instead and check it again in tb_dp_tunnel_active() because the callback runs after the lock has been dropped again. Also clear the flag in tb_dp_dprx_start() so that it only ever describes the work that is currently in flight. | ||||
| CVE-2026-98688 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Fix NULL dereference in tb_remove_work() There is a slight race between tb_remove_work() and tb_domain_remove() which leads to dereferencing a NULL tb->root_switch pointer inside tb_free_unplugged_xdomains(): Thread A Thread B tb_remove_work() tb_domain_remove() mutex_lock(&tb->lock) tb_stop() /* doesn't cancel a running callback */ cancel_delayed_work(&tcm->remove_work) ... tb_switch_remove(tb->root_switch) tb->root_switch = NULL mutex_unlock(&tb->lock) mutex_lock(&tb->lock) ... /* without checking ->root_switch */ tb_free_unplugged_xdomains(tb->root_switch) mutex_unlock(&tb->lock) Commit a8937f35cf39 ("thunderbolt: Remove XDomain from the bus without holding tb->lock") doesn't seem right to move tb_free_unplugged_xdomains() out of the &tb->lock section and the check for tb->root_switch, in particular. It states: For this reason separate removing the XDomain from the topology data structures (where we need the lock) from unregistering the device from the bus (where remove callbacks of the drivers are being called). tb_free_unplugged_xdomains() belongs to the former group of functions requiring the lock. And it also calls tb_xdomain_remove() which should only be called with &tb->lock held. Found by Linux Verification Center (linuxtesting.org) with Svace static analysis tool. | ||||
| CVE-2026-98687 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Reject oversized XDomain properties responses tb_xdp_properties_request() allocates room for 45 data dwords in its 252-byte response buffer. The XDomain length field is six bits wide, however, and a malicious peer can set it to 63. After the fixed response fields are subtracted, the driver treats this as 48 data dwords. Commit 322e93448d90 ("thunderbolt: Clamp XDomain response data copy to allocation size") only bounds the copy against data_len. If data_len is at least 48, memcpy() reads 192 bytes from the 180-byte res->data array, causing a 12-byte heap out-of-bounds read. Commit 4db2bd2ed478 ("thunderbolt: Limit XDomain response copy to actual frame size") limits the earlier copy but does not constrain this header-derived length. Reject response data lengths that exceed the allocated source buffer before copying them into the assembled property block. | ||||
| CVE-2026-98685 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: discard post-EOF pagecache when extending a file via clone range cifs_remap_file_range() discarded the pagecache only for the folios overlapping the destination region, so when a clone extends the file the folio straddling the old EOF - which may hold data dirtied past EOF through an mmap - was never dropped and became visible as file content once the file was extended. Start the discard at the smaller of fstart and the old EOF. i_size is still old here, so nothing past the old EOF is flushed to the server. | ||||
| CVE-2026-98679 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: accel: kxcjk-1013: reject duplicate event disable The IIO core does not filter duplicate writes to the event enable attribute. kxcjk1013_write_event_config() already ignores repeated enable requests, but a repeated disable request still calls kxcjk1013_set_power_state(data, false), dropping a runtime PM reference that was not acquired for this request. This can underflow the runtime PM usage count and trigger a "Runtime PM usage count underflow" warning. Return early when the requested state already matches ev_enable_state. | ||||
| CVE-2026-98678 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: adc: ad4030: fix invalid oversampling_ratio validation In ad4030_set_avg_frame_len(), the logarithm is calculated before input validation. Passing zero or negative values leads to an undefined result from ilog2(). Validate that the input is strictly positive prior to computing its logarithm. | ||||
| CVE-2026-98676 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: adc: ade9000: fix NULL pointer dereference in clkout registration ade9000_setup_clkout() passes NULL as the register address when registering a divider clock. During clock registration, the common clock framework calls clk_divider_recalc_rate(), which dereferences the address through readl(). As a result, probing an ADE9000 configured as a clock provider with an external input clock crashes. CLKOUT passes CLKIN through without changing its rate. Register it as a 1:1 fixed-factor clock, which does not require register access. This change does not affect the configuration using the internal clock, for which the driver does not register a clock provider. | ||||
| CVE-2026-98675 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: adc: ade9000: handle Phase C dip events in IRQ1 handler ADE9000_ST1_CROSSING_DEPTH is the exclusive upper bound for scanning the STATUS1 event bits, so a value of 25 left out the highest event bit, ADE9000_ST1_DIPC_BIT (bit 25). Phase C dip events were never reported. Bump the value to 26 so bit 25 is scanned. | ||||