Export limit exceeded: 409952 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 409952 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (409952 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98647 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix divide-by-zero in btf_struct_walk() When an access goes past the struct and the last member is a flexible array, btf_struct_walk() folds the offset back into a single element with (off - moff) % t->size, but never checks that the element type has a size. BTF takes an empty struct, so this in program BTF /* event could be empty */ struct event { #ifdef HAVE_TIMESTAMP __u64 ts; #endif }; struct batch { int nr; struct event events[]; }; divides by zero at prog load time. Getting there needs a PTR_TO_BTF_ID that is not MEM_ALLOC, e.g. a plain read of a local kptr stashed in a map from a sleepable program. Oops: divide error: 0000 [#1] SMP KASAN PTI RIP: 0010:btf_struct_walk+0x53f/0x1570 Call Trace: <TASK> btf_struct_access+0x42a/0xcd0 check_ptr_to_btf_access+0x4dc/0x1160 check_mem_access+0x3a45/0x8740 check_load_mem+0x36a/0xd10 do_check_common+0x3ef0/0xb210 bpf_check+0x6d3b/0x8580 bpf_prog_load+0xf7c/0x2720 __sys_bpf+0xa83/0x3690 __x64_sys_bpf+0xc7/0x150 x64_sys_call+0x1f3f/0x27e0 do_syscall_64+0xe5/0x610 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> Reject a zero-sized element type. The fixed array path in the same function already bails out on the same thing: btf_struct_walk() ... /* skip empty array */ if (moff == mtrue_end) continue; msize /= total_nelems; | ||||
| CVE-2026-98646 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tcp: Skip cond_resched() in inet_csk_listen_stop() under BPF context bpf_sock_destroy() runs from the tcp iterator, under rcu_read_lock(). If the sock is a listener that still has children in its accept queue, tcp_abort() ends up in inet_csk_listen_stop() and the cond_resched() there trips the debug check: BUG: sleeping function called from invalid context at net/ipv4/inet_connection_sock.c:1523 in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 628, name: test_progs preempt_count: 0, expected: 0 RCU nest depth: 1, expected: 0 locks held by test_progs/628: 3, last CPU#3: #0: ffff8881158cee18 (&p->lock){+.+.}-{4:4}, at: bpf_seq_read+0x56/0x1210 #1: ffff8881106bb858 (sk_lock-AF_INET6){+.+.}-{0:0}, at: bpf_iter_tcp_seq_show+0x32b/0x4b0 #2: ffffffffb435af20 (rcu_read_lock){....}-{1:3}, at: bpf_iter_run_prog+0x46b/0xde0 CPU: 3 UID: 0 PID: 628 Comm: test_progs Tainted: G W 7.2.0+ #65 PREEMPT Tainted: [W]=WARN Call Trace: <TASK> dump_stack_lvl+0xc1/0xf0 dump_stack+0x10/0x20 __might_resched+0x3d2/0x610 inet_csk_listen_stop+0x7b/0xbf0 tcp_abort+0x23b/0x3b0 bpf_sock_destroy+0xfc/0x140 bpf_prog_448133d24601754f_iter_tcp6_server+0x81/0x8a bpf_iter_run_prog+0x538/0xde0 bpf_iter_tcp_seq_show+0x26b/0x4b0 bpf_seq_read+0x424/0x1210 vfs_read+0x197/0xe40 ksys_read+0x119/0x240 __x64_sys_read+0x72/0xc0 x64_sys_call+0x647/0x27e0 do_syscall_64+0xe5/0x610 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7fad39b28aca RSP: 002b:00007ffc381c61c0 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: 00007ffc381c6a88 RCX: 00007fad39b28aca RDX: 0000000000000032 RSI: 00007ffc381c6250 RDI: 0000000000000014 RBP: 00007ffc381c61e0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000003 R13: 0000000000000000 R14: 000055f077c1bbb0 R15: 00007fad3a0f3000 </TASK> The commit that added the kfunc already guards lock_sock() in tcp_abort() and udp_abort() with has_current_bpf_ctx(), but missed the listener path. Do the same for the cond_resched(). The loop runs inside the iterator's rcu_read_lock(), it must not reschedule or report a quiescent state there. | ||||
| CVE-2026-98645 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: HID: winwing: fix use-after-free in force feedback teardown winwing_init_ff() passes the driver's private data, allocated with devm_kzalloc() in winwing_probe(), as the effect context to input_ff_create_memless(). The memoryless force-feedback core takes ownership of that pointer and frees it with kfree() from input_ff_destroy() (ml_ff_destroy()) when the input device is destroyed. Freeing a devm-managed allocation with kfree() is an invalid free, and the same object is then released again by devres when the HID device is torn down, a double free. As the allocation also embeds the LED class devices, their timers and work item live on freed memory and the slab gets corrupted. This triggers on unbind, rmmod, hot-unplug and on system suspend, where the firmware cache walks the now-corrupt devres list. KASAN reports: BUG: KASAN: invalid-free in input_ff_destroy Allocated by task N: winwing_probe Pass NULL as the memless context instead and fetch the driver data from the input device in winwing_play_effect(): the HID core already stores the hid_device as the input device's drvdata. The force-feedback core then owns nothing that it must not free. | ||||
| CVE-2026-98644 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Avoid soft lockup in __htab_map_lookup_and_delete_batch() __htab_map_lookup_and_delete_batch() has no rescheduling point. The batch count bounds how many entries are copied out, not how many buckets are visited, so one BPF_MAP_LOOKUP_BATCH call can walk the map end to end. The empty-bucket fast path is worse: it stays inside a single rcu_read_lock() / bpf_disable_instrumentation() section for any run of consecutive empty buckets. That holds up on small maps, but it falls apart at scale. On a 144-CPU arm64 host running a CONFIG_PREEMPT_NONE kernel, periodic BPF_MAP_LOOKUP_BATCH calls against an LRU hash map with 16,777,216 buckets held a CPU inside the batch op for 77+ seconds and triggered the soft lockup watchdog. Commit 75134f16e7dd ("bpf: Add schedule points in batch ops") fixed this same problem in the generic batch ops, but not in this htab-native path, which every htab-based hash map variant uses for its lookup[_and_delete] batch ops. Complete that fix here. Leave the critical section after 64 consecutive empty buckets, call cond_resched_tasks_rcu_qs(), and resume at the saved bucket cursor. No locks are held at that point, and resuming from the cursor is already the function's behavior for non-empty buckets. Add the same call to the per-bucket loop after copy_to_user(), where every lock has been dropped. cond_resched_rcu() is not enough here: sleeping with bpf_prog_active elevated makes tracing programs on that CPU silently skip their invocations. Plain cond_resched() is not enough either. It is a no-op under PREEMPT and PREEMPT_LAZY, the only models arm64 and x86 have offered since commit 7dadeaa6e851 ("sched: Further restrict the preemption modes"). It is also never a Tasks RCU quiescent state, in any model: the reschedule counts as a preemption. The walking task stays a holdout and stalls every synchronize_rcu_tasks() caller, ftrace and BPF trampoline teardown included, until the syscall returns [1]. cond_resched_tasks_rcu_qs() is the usual tool for that [2]. It reports the quiescent state at each yield and still reschedules as cond_resched() does on PREEMPT_NONE and PREEMPT_VOLUNTARY kernels. | ||||
| CVE-2026-98643 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix out-of-bounds read of rtt_min in sock_ops A sockops prog reading skops->rtt_min never checks the sk type: on the tcp_conn_request() path sock_ops->sk is a request_sock (non-full), and the ctx rewrite casts it to a tcp_sock (full) and reads rtt_min past the end of the request_sock, returning dirty adjacent memory. SEC("sockops") int prog(struct bpf_sock_ops *skops) { switch (skops->op) { case BPF_SOCK_OPS_RWND_INIT: leak = skops->rtt_min; /* reads the request_sock OOB */ ... } } For instance one such read returned rtt_min=0xffff8881, the high half of a leaked kernel pointer. Guarding that cast is exactly what SOCK_OPS_GET_FIELD() does -- it checks is_locked_tcp_sock and returns 0 when sock_ops->sk is not a locked full socket. Every other tcp_sock field in sock_ops goes through it; rtt_min is the only one open-coded, so it skips the check. Read rtt_min through SOCK_OPS_GET_FIELD() too. rtt_min is a bit special: it is a struct minmax and we only want the current min, so pass rtt_min.s[0].v. That is equivalent to the old hand-computed offset offsetof(struct tcp_sock, rtt_min) + sizeof_field(struct minmax_sample, t) (s[0] sits at rtt_min + 0 and .v at + sizeof(.t), i.e. what minmax_get() returns), so the loaded field is unchanged and only the full-sock guard is added. The two BUILD_BUG_ON()s that protected the hand-computed offset are no longer needed. Before patch: 0: r1 = *(u64 *)(r1 +0) ; r1 = skops->sk 1: r1 = *(u32 *)(r1 +2324) ; ((tcp_sock *)sk)->rtt_min.s[0].v After patch: 0: *(u64 *)(r1 +56) = r9 1: r9 = *(u8 *)(r1 +50) ; is_locked_tcp_sock 2: if r9 == 0 goto pc+4 ; not a locked full sock -> 0 3: r9 = *(u64 *)(r1 +56) 4: r1 = *(u64 *)(r1 +0) ; r1 = skops->sk 5: r1 = *(u32 *)(r1 +2324) ; rtt_min.s[0].v 6: goto pc+2 7: r9 = *(u64 *)(r1 +56) 8: r1 = 0 | ||||
| CVE-2026-98642 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix UAF due to concurrent consumption of ttrace lists in alloc_bulk Syzkaller repeatedly triggered UAF splats related to nodes in waiting_for_gp_ttrace within the bpf memalloc: BUG: KASAN: slab-use-after-free in llist_del_first+0x85/0x110 lib/llist.c:61 Read of size 8 at addr ffff8881572cd080 by task syz.4.470/5112 ... llist_del_first+0x85/0x110 lib/llist.c:61 alloc_bulk+0x193/0x460 kernel/bpf/memalloc.c:229 bpf_mem_refill+0x386/0x560 kernel/bpf/memalloc.c:436 Freed by task 14: ... __free_rcu kernel/bpf/memalloc.c:281 [inline] __free_rcu_tasks_trace+0x48/0xd0 kernel/bpf/memalloc.c:291 rcu_tasks_invoke_cbs+0x1ec/0x3e0 kernel/rcu/tasks.h:571 rcu_tasks_one_gp+0x13d/0x220 kernel/rcu/tasks.h:621 rcu_tasks_kthread+0xf3/0x120 kernel/rcu/tasks.h:651 The reason is that the UAF occurs after the RCU Tasks Trace GP expires: when the __free_rcu() callback runs, there is no synchronization protecting llist_del_all() against concurrent alloc_bulk() operating on waiting_for_gp_ttrace, leading to the race condition below: CPU0 CPU1 __free_rcu (RCU Tasks Trace callback) alloc_bulk llist_del_first(&c->waiting_for_gp_ttrace) entry = smp_load_acquire(&head->first); do { if (entry == NULL) return NULL; free_all(llist_del_all(&c->waiting_for_gp_ttrace)) llist_for_each_safe(pos, t, llnode) free_one(pos); next = READ_ONCE(entry->next); <-- trigger UAF } while (!try_cmpxchg(&head->first, &entry, next)); In addition, there is also a theoretical race condition on the free_by_rcu_ttrace list. This race requires two preconditions: an in-flight Tasks Trace GP keeping c->call_rcu_ttrace_in_progress == 1, and concurrent cross-CPU frees repopulating c->free_by_rcu_ttrace with new nodes. Under these conditions, the following scenario triggers UAF: // CPU0 // irq work is still busy (on PREEMPT_RT) alloc_bulk() llist_del_first(&c->free_by_rcu_ttrace) entry = smp_load_acquire(&head->first); do { if (entry == NULL) return NULL; // CPU1 bpf_mem_alloc_destroy() WRITE_ONCE(c->draining, true) // wait for CPU0 irq_work_sync() // CPU2 do_call_rcu_ttrace(tgt(CPU0)) if (c->draining) { llist_del_all(&c->free_by_rcu_ttrace) free_all() } // CPU0 continue next = READ_ONCE(entry->next); <-- trigger UAF while (!try_cmpxchg(&head->first, &entry, next)); Fix this by introducing a raw spinlock to synchronize the concurrent consumption on waiting_for_gp_ttrace and free_by_rcu_ttrace. | ||||
| CVE-2026-98641 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf, arm64: set up the frame pointer for the exception callback A program acting as exception boundary saves all callee-saved registers, so build_prologue() takes the exception_cb path and never calls push_callee_regs(). That is the only place find_used_callee_regs() runs, and with it the only place ctx->fp_used is set, so the callback prologue does not emit the mov x25, sp that points BPF_REG_FP at the frame the callback runs on. x25 keeps whatever it held when bpf_throw() was called. If the throw came from a subprogram that uses its own BPF stack, that is the subprogram's frame pointer, and since the subprogram never returns it never restores x25 either. Stack accesses through BPF_REG_FP are rewritten to be stack pointer relative, so those still land in the callback's own frame. Materializing the register does not: a callback that passes the address of a local variable to a helper hands over an address in the dead subprogram's frame. That address is below the callback's stack pointer by then, and the helper's own call chain covers it, so the helper can write over its own return address. 0x1234 below is the value the helper was asked to store: pc : 0x1234 lr : 0x1234 Call trace: 0x1234 (P) bpf_test_run+0x188/0x3e0 bpf_prog_test_run_skb+0x47c/0x998 __sys_bpf+0xbdc/0xdd8 Kernel panic - not syncing: Oops: Fatal exception in interrupt Set ctx->fp_used on the exception callback path so that the existing code further down sets x25 from the stack pointer. The epilogue restores it from the main program's save area along with the other callee-saved registers, as it already does. x86 sets the frame pointer for the callback from the argument it is passed, and powerpc computes it from the stack pointer. | ||||
| CVE-2026-98640 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: HID: amd_sfh: Validate PCI BAR size before mapping The amd_sfh driver maps PCI BAR 2 using pcim_iomap_regions() and subsequently accesses MMIO registers at offsets up to 0x10958 (e.g., AMD_P2C_MSG3 at 0x1068C). However, the driver never validates that the BAR size is large enough to cover these accesses. If the driver is bound to a device with a smaller BAR 2, this leads to an out-of-bounds memory access and a page fault during the probe function. For example, a page fault can occur when reading from privdata->mmio + AMD_P2C_MSG3 in mp2_select_ops(): BUG: unable to handle page fault for address: ffffc9000390368c PGD 100000067 P4D 100000067 PUD 1012c1067 PMD 105b64067 PTE 0 Oops: Oops: 0000 [#1] SMP KASAN NOPTI RIP: 0010:readl arch/x86/include/asm/io.h:59 [inline] RIP: 0010:mp2_select_ops drivers/hid/amd-sfh-hid/amd_sfh_pcie.c:282 [inline] RIP: 0010:amd_mp2_pci_probe+0x337/0x5f0 drivers/hid/amd-sfh-hid/amd_sfh_pcie.c:487 Call Trace: <TASK> local_pci_probe drivers/pci/pci-driver.c:332 [inline] pci_call_probe drivers/pci/pci-driver.c:394 [inline] __pci_device_probe drivers/pci/pci-driver.c:455 [inline] pci_device_probe+0x431/0xc90 drivers/pci/pci-driver.c:489 Fix this by verifying that the length of BAR 2 is at least 128KB before attempting to map it. Since the maximum accessed offset is 0x10958, and PCI BAR sizes are powers of 2, any legitimate hardware will have a BAR size of at least 128KB. | ||||
| CVE-2026-98639 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: riscv: Fix NACL hfence entry update order The SBI v3.0 specification (section 15.1.2) requires a nested HFENCE entry to be populated as follows: 1) find an unused entry with Config.Pending == 0 2) update the Page_Number and Page_Count words 3) update the Config word with Config.Pending set __kvm_riscv_nacl_hfence() writes the Config word first, so the SBI implementation (or NACL hardware) can observe a pending entry with pnum/pcount values left over from the previous use of that entry, resulting in incorrect TLB flush ranges. Write pnum and pcount first and the Config word last. Since the consumer is an external agent on coherent shared memory, use WRITE_ONCE() to stop the compiler from reordering the stores and smp_wmb() to make the parameter words globally visible before the Pending bit is set. | ||||
| CVE-2026-98634 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: sd_zbc: Reject disks with too many zones sd_zbc_read_zones() computes the number of zones with 64-bit arithmetic and stores the result in the unsigned int nr_zones field of struct zoned_disk_info, silently truncating counts that exceed 32 bits. The truncated count is later used to size per-zone resources, while the device may still report more zones than fit. Moreover, sd_zbc_report_zones() counts the reported zones with a signed int zone_idx, which overflows past INT_MAX. Reject devices reporting more than INT_MAX zones at scan time; such a device is not realistic for any medium that exists today, and accepting it produces inconsistent zone bookkeeping. | ||||
| CVE-2026-98633 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btnxpuart: Fix skb leak in nxp_process_fw_dump() When CONFIG_DEV_COREDUMP=n, hci_devcd_append() returns -EOPNOTSUPP without freeing its skb argument. This leaks the cloned skb and also prevents nxp_set_ind_reset() from being called to perform recovery. Fix by guarding the hci_devcd_append(hdev, skb_clone(skb, GFP_ATOMIC)) call with IS_ENABLED(CONFIG_DEV_COREDUMP). | ||||
| CVE-2026-98631 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xsk: Use a 32-bit compare in xsk_map_gen_lookup xsk_map_gen_lookup() loads a u32 key and compares it with max_entries using BPF_JMP_IMM. BPF immediates are sign-extended to 64 bits, so a max_entries value of 0x80000000 or higher becomes a threshold larger than every zero-extended 32-bit key. An out-of-range index then skips the bounds check and the generated lookup reads past xsk_map[]. Compare with BPF_JMP32_IMM so the check stays in 32-bit unsigned range. | ||||
| CVE-2026-98630 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: eth: fbnic: Fix payload page pool error cleanup The payload page pool pointer contains an error pointer when its allocation fails. The cleanup path passes that error pointer to page_pool_destroy() instead of destroying the header page pool. This can dereference the error pointer and leave the header page pool allocated. Destroy the header page pool instead. | ||||
| CVE-2026-98627 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Preserve packet pointer class displacement in regsafe() regsafe() maps packet pointer IDs between states and checks that each current register range is a subset of the corresponding explored register range. It does not, however, preserve the displacement between registers that share a packet pointer ID. This is unsound because packet range is shared by ID. A bounds check on one class member updates every member, and a later access can consume the range through another member. Commit 022ac0750883 ("bpf: use reg->var_off instead of reg->off for pointers") folded the fixed pointer offset into r64 and removed the old off equality check, so two individually narrower registers can prune even when their displacement has changed. The explored path can then license an out-of-bounds packet access on the pruned path. Require matching range bases for packet pointers with an ID. Together with the existing ID mapping, this preserves the displacement between members of each packet-pointer class without adding per-ID state. Packet pointers without an ID remain unaffected. | ||||
| CVE-2026-98626 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Restrict CO-RE poisoning to relocatable instructions CO-RE relocation records can name any instruction offset. When a relocation cannot be resolved, bpf_core_patch_insn() currently poisons its target before checking whether that instruction is a valid relocation target. Malformed metadata can therefore replace jumps, calls, exits, register-source arithmetic, or non-immediate loads instead of failing at the relocation step. Handle poisoning only after the instruction has passed the same class and operand-form checks used for a resolved relocation. Route invalid forms through the existing diagnostic and return a hard error. Keep poisoning supported instructions, including both halves of a plain ldimm64, so an unresolved relocation in dead code remains valid. Extend bpf_core_poison_insn() to poison both halves of ldimm64, and return its status directly from each validated instruction case. This avoids routing the success path through a common label and leaves the helper free to report errors. The shared relocation code applies this restriction to both libbpf and in-kernel CO-RE. | ||||
| CVE-2026-98625 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: publish HW_DEAD after worker is done flow_offload_work_del() sets NF_FLOW_HW_DEAD before the work handler clears NF_FLOW_HW_PENDING. Once a flow is both HW_DYING and HW_DEAD, a concurrent garbage collection pass can remove it and schedule it for RCU freeing. The offload worker holds neither an RCU read lock nor a reference to the flow. If it is preempted after publishing HW_DEAD, the RCU callback can free the flow before the worker resumes and clears HW_PENDING, resulting in a use-after-free. Move HW_DEAD publication to the common worker epilogue after the pending bit is cleared, making it the final flow access by destroy work. Order all preceding flow accesses before publishing the bit that allows garbage collection to free the object. | ||||
| CVE-2026-98624 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_queue: hold nfnl mutex in event notifier We must serialize the release notifier and the config netlink function. A concurrent thread can issue close() which can call the release function while unrelated socket processes UNBIND request for same portid: Oops: general protection fault, [..] RIP: 0010:__instance_destroy+0x60/0x210 [nfnetlink_queue] Call Trace: nfqnl_recv_config+0x9b0/0xdc0 [nfnetlink_queue] nfnetlink_rcv_msg+0x7c2/0xeb0 ? __pfx_nfnetlink_rcv_msg+0x10/0x10 After this, parallel UNBIND and URELEASE events are impossible. This change isn't nice, but its the shortest fix given instances are not refcounted and the nfnetlink config callback drops the rcu read lock early due to need for sleeping allocations. | ||||
| CVE-2026-98623 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/nouveau/clk: fix list cursor use after loop in nvkm_clk_ustate_update If list_for_each_entry() exits without hitting a break then "pstate" is not a valid pstate pointer. Introduce a "found" variable instead. The check is reachable from userspace: nvkm_clk_ustate_update() takes the pstate id straight from the 'pstate' debugfs file, so requesting an id that is not in clk->states - or any id at all when the perf tables are broken and the list is empty - makes the pstate->pstate != req test dereference the list head cast to a struct nvkm_pstate, which is an out-of-bounds read. [Francesco: rebased on drm-misc-next, expanded the commit message] | ||||
| CVE-2026-98619 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: ethtool: keep rtnl_lock for the ioctl self test An offline self test that brings the interface down and back up with netif_close() / netif_open() requires rtnl_lock for both. Since the ethtool IOCTL path became rtnl-optional for ops-locked drivers, the ETHTOOL_TEST ioctl runs holding only the netdev instance lock, so on an ops-locked driver the self test now tears the device down without rtnl_lock. With lockdep this reproduces deterministically on every offline self test on such a driver; note the sole lock held is the instance lock, not rtnl: WARNING: suspicious RCU usage net/core/netpoll.c:207 suspicious rcu_dereference_protected() usage! 1 lock held by ethtool/107: #0: (&dev->lock){+.+.}, at: dev_ethtool Call Trace: netpoll_poll_disable __dev_close_many netif_close_many netif_close fbnic_self_test dev_ethtool_locked dev_ethtool dev_ioctl sock_ioctl __x64_sys_ioctl Without lockdep the same condition trips ASSERT_RTNL() in __dev_close_many() / __dev_open(); that check only samples the global rtnl state, so it can be masked by a concurrent rtnl holder, but the device is still being reconfigured without the lock it requires. The ethtool self_test is a legacy ioctl-only command, so an ETHTOOL_TEST case is only needed on the ioctl path. Add an opt-in bit for drivers whose self test needs rtnl_lock and set it on the ops-locked drivers whose offline self test tears the interface down and up: - fbnic (ops-locked via queue_mgmt_ops): fbnic_self_test() offline path uses netif_close() / netif_open(). - bnxt (ops-locked via queue_mgmt_ops): bnxt_self_test() offline path goes through bnxt_close_nic() / bnxt_half_open_nic() / bnxt_half_close_nic() / bnxt_open_nic(), which close and reopen the device. | ||||
| CVE-2026-98617 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: eth: fbnic: use the Rx queue napi pointer to find the napi vector The queue management ndos pick the napi vector for an Rx queue with: nv = fbn->napi[idx % fbn->num_napi]; The issue is this is only correct in the cases where there are no standalone Tx vectors. In those cases we were allocating the Tx vectors first and then the Rx so the queues would be pointing to Tx NAPI vectors instead of the Rx ones. The mapping the ndos want is already recorded. fbnic_set_netif_napi() publishes it with netif_queue_set_napi(), which stores the napi pointer in netdev_rx_queue.napi, and fbnic_reset_netif_napi() clears it again. Both run under the netdev instance lock that the queue management ndos also hold, so the pointer can be read directly. Use it and drop the divide. The pointer is NULL exactly while the datapath is down, so fbnic_queue_mem_alloc() can reject that case rather than reaching into freed state: netdev_rx_queue_restart() calls it before it tests netif_running(), and fbnic_pm_suspend() leaves netif_running() true across a PCIe recovery that never completes, so a queue restart can arrive after fbnic_stop() has freed the rings and the vectors. fbnic_stop() clears the association in fbnic_reset_netif_queues() before fbnic_free_napi_vectors(), so the NULL is always published first. fbnic_queue_start() and fbnic_queue_stop() need no check of their own, as netdev_rx_queue_reconfig() only reaches them once fbnic_queue_mem_alloc() has succeeded under the same instance lock. | ||||