Export limit exceeded: 409964 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (409964 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98770 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: midi2: Fix the jack descriptor array sizes The jack in/out descriptor arrays in struct f_midi2_usb_config have the size of MAX_CABLES, which look reasonable -- but it turned out to be incorrect. Namely, the entries for those arrays are added from both inputs and outputs, hence for each loop cycle, it adds two, ended up with as twice as the expected size. This inconsistency may result in potential OOB when a large number of jacks are set up via configfs, although the max number of cables (the loop count) is limited to MAX_CABLES. For addressing it, correct the jack_ins & jack_outs array sizes to twice, MAX_CABLES * 2. | ||||
| CVE-2026-98769 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_uac1_legacy: validate bRequest index in generic_{set,get}_cmd generic_set_cmd() and generic_get_cmd() use the low nibble of ctrl->bRequest as an index into con->data[]: u8 cmd = (ctrl->bRequest & 0x0F); /* 0 .. 15 */ ... con->data[cmd] = value; /* OOB when cmd >= 5 */ struct usb_audio_control (include/linux/usb/audio.h) declares data as a 5-element array, so indices 5 through 15 write (or read) up to 44 bytes past the end of the array on the heap. A malicious USB host can craft a class-specific SET_CUR / GET_CUR request with an arbitrary bRequest value, triggering the out-of-bounds access from an IRQ completion handler with no further preconditions. Add an ARRAY_SIZE() guard to both functions. | ||||
| CVE-2026-98768 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: anx7411 - stop the IRQ before destroying the workqueue The IRQ is devm-managed, so it can still queue plat->work while remove() is tearing the queue down. Disable it first. | ||||
| CVE-2026-98766 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: aspeed-vhub: cancel wake work on device removal wake_work is armed from the gadget .wakeup callback to resume suspended downstream ports, and it is never cancelled in ast_vhub_remove(), so a work item queued before or during removal can run after devm has freed vhub and its ports, a use-after-free. Cancelling the work alone is not sufficient: usb_gadget_wakeup() takes no lock and the unbind path never clears wakeup_en, so a remote-wakeup request in flight on another CPU can re-arm the work after the cancel and before vhub is freed. ast_vhub_del_dev() already clears d->registered under vhub->lock before unregistering the gadget. Refuse the wakeup in ast_vhub_udc_wakeup() once d->registered is clear: the check and the schedule_work() are then atomic against the unbind, so a wakeup that passed before the flag was cleared is drained by the cancel_work_sync() after the del_dev loop, and one that arrives later returns without arming. Also move INIT_WORK() to the top of ast_vhub_probe(), since the probe error path reuses ast_vhub_remove() and would otherwise cancel a never-initialized work item. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-98765 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: USB: gadget: dummy-hcd: Fix wait for outstanding request completions The dummy-hcd driver emulates synchronize_irq() by waiting until its private callback_usage counter drops to 0 (with the private lock not held). This counter is incremented whenever a gadget driver callback occurs (which requires the private lock to be dropped), but not when a request completion handler is called. This is an oversight. Request completion is triggered by timer interrupts (emulating device IRQs in a real UDC), and the interrupt handlers are supposed to have completed when the synchronize_irq() emulation routine returns -- they aren't supposed to be in the middle of a completion callback. If this happens it can lead to a gadget driver's unbind routine running before all outstanding request completions have finished, maybe even allowing the gadget driver's module to be unloaded while a completion handler is still running. Fix the oversight by incrementing the callback_usage value across request completion callbacks. | ||||
| CVE-2026-98764 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_fs: Fix NULL pointer dereference in FUNCTIONFS_ENDPOINT_DESC When user space sets up FunctionFS with only full-speed descriptors (e.g., flags = FUNCTIONFS_HAS_FS_DESC) and the gadget operates at a higher speed (such as USB_SPEED_HIGH or USB_SPEED_SUPER), config_ep_by_speed() detects that the function lacks descriptors for the current speed, logs a warning, and falls back to full-speed descriptors. The endpoint is then successfully enabled via usb_ep_enable(), and epfile->ep becomes valid. However, when user space subsequently issues the FUNCTIONFS_ENDPOINT_DESC ioctl to query the endpoint descriptor, ffs_epfile_ioctl() selects the descriptor index solely based on gadget->speed: switch (epfile->ffs->gadget->speed) { case USB_SPEED_SUPER: case USB_SPEED_SUPER_PLUS: desc_idx = 2; break; case USB_SPEED_HIGH: desc_idx = 1; break; default: desc_idx = 0; } desc = epfile->ep->descs[desc_idx]; memcpy(&desc1, desc, desc->bLength); Because user space only supplied full-speed descriptors, epfile->ep->descs[1] is NULL. Dereferencing desc->bLength triggers an immediate kernel NULL pointer dereference panic. Fix this by falling back through lower speed descriptors if the current speed descriptor was not supplied, matching the fallback logic in config_ep_by_speed() and historical f_fs behavior. If still missing, fall back to epfile->ep->ep->desc (the active descriptor), and return -EINVAL safely if no valid descriptor is found. In addition, mark desc as const to match struct usb_ep::desc and avoid discarding qualifiers. | ||||
| CVE-2026-98762 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: USB: dwc2: shut down wakeup timer before freeing HCD state dwc2_wakeup_detected() accesses the DWC2 host state and can rearm the wakeup timer. dwc2_hcd_free() currently deletes the timer only after freeing host-owned state, and timer_delete() does not synchronize a callback or prevent it from being queued again. Stop and shut down the timer in dwc2_hcd_release(), before the HCD resources are freed. This covers both the HCD initialization error path and normal HCD removal. | ||||
| CVE-2026-98761 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm: recover after failure to start the frs ams Reset the port if the tcpm fails to start the FAST_ROLE_SWAP AMS by initiating error recovery on it. This helps in cases where some cables (incorrectly) signal an FRS to an FRS capable port during disconnection. The TCPC autonomously starts sourcing VBUS on detecting the FRS signal. However, the VBUS sourcing is left on when the FAST_ROLE_SWAP AMS fails to start (as tcpm_sink_tx_ok is 0 as CC is open due to the cable disconnect). This is because the code sets the state to INVALID_STATE without resetting the port state. Log snippet before changes: [ 101.401960] AMS FAST_ROLE_SWAP start [ 101.401971] Sink TX No Go [ 101.401982] sourcing vbus [ 101.401987] VBUS on [ 101.402159] VBUS on [ 109.257809] CC1: 0 -> 0, CC2: 5 -> 0 [state SNK_READY, polarity 1, disconnected] [ 111.267442] VBUS on After changes: [ 70.541211] AMS FAST_ROLE_SWAP start [ 70.541220] Sink TX No Go [ 70.541228] state change SNK_READY -> ERROR_RECOVERY [rev3 NONE_AMS] [ 70.541362] VBUS on [ 70.541365] sourcing vbus [ 70.541367] VBUS on [ 70.541374] state change ERROR_RECOVERY -> PORT_RESET [rev3 NONE_AMS] [ 70.541410] disable vbus discharge ret:0 [ 70.543028] Setting usb_comm capable false [ 70.544009] Setting voltage/current limit 0 mV 0 mA [ 70.544034] polarity 0 [ 70.544239] Requesting mux state 0, usb-role 0, orientation 0 [ 70.555550] cc:=0 [ 70.555595] pending state change PORT_RESET -> PORT_RESET_WAIT_OFF @ 100 ms [rev3 NONE_AMS] [ 70.555697] VBUS off [ 70.555702] VBUS VSAFE0V [ 70.555762] CC1: 5 -> 0, CC2: 0 -> 0 [state PORT_RESET, polarity 0, disconnected] [ 70.587794] VBUS off [ 70.587799] VBUS VSAFE0V [ 70.655672] state change PORT_RESET -> PORT_RESET_WAIT_OFF [delayed 100 ms] [ 70.655682] state change PORT_RESET_WAIT_OFF -> SNK_UNATTACHED [rev3 NONE_AMS] [ 70.655686] Start toggling [ 70.656274] CC1: 0 -> 0, CC2: 0 -> 0 [state TOGGLING, polarity 0, disconnected] | ||||
| CVE-2026-98759 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: tipd: fix uninitialized typec_partner_desc in cd321x_update_work() cd321x_update_work() passes a stack-allocated typec_partner_desc to typec_register_partner() after initializing only usb_pd, accessory and identity. typec_register_partner() copies attach and deattach from the descriptor into the partner. With those fields left unset, garbage function pointers may be stored and later invoked from typec_partner_link_device() when a USB device is linked to the port. Uninitialized pd_revision and usb_capability similarly leak stack data through partner sysfs. Zero-initialize the descriptor so optional callbacks remain NULL and the remaining fields are zero. | ||||
| CVE-2026-98758 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: glink: fix use-after-free of ucsi on remove The pmic_glink client is released by the devres cleanup, which runs after pmic_glink_ucsi_remove() has returned, so its notification callbacks can queue work until then. Work that runs after ucsi_unregister() has been called touches freed state: it dereferences the connector array that ucsi_unregister() freed, or registers and unregisters the instance a second time. Disable both work items with disable_work_sync() before unregistering, and unregister only if the instance is still registered. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-98756 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: cdns3: Fix NULL pointer dereference in cdns3_pci_probe The Cadence USBSS controller is a two-function PCI device. The first probed function allocates the driver data and stores it with pci_set_drvdata(), while the second function reuses it via pci_get_drvdata() when pci_is_enabled() reports that the first function has already been probed. When the second function is probed while the first one has been enabled but has not yet set its driver data, pci_get_drvdata() returns NULL, and the subsequent wrap->devfn assignment dereferences a NULL pointer and crashes the kernel. logs: Call trace: cdns3_pci_probe+0xa4/0x300 local_pci_probe+0x44/0xa8 pci_call_probe+0x54/0x158 pci_device_probe+0x84/0x100 really_probe+0x184/0x3d0 __driver_probe_device+0x80/0x178 driver_probe_device+0x44/0xe8 __driver_attach+0xec/0x1f8 bus_for_each_dev+0x7c/0xe0 driver_attach+0x28/0x38 bus_add_driver+0x110/0x238 driver_register+0x64/0x128 __pci_register_driver+0x50/0x60 cdns3_pci_driver_init+0x28/0x38 do_one_initcall+0x5c/0x280 do_initcalls+0x104/0x1d8 kernel_init_freeable+0x140/0x218 kernel_init+0x28/0x1f8 ret_from_fork+0x10/0x20 Return -EPROBE_DEFER in this case so that probing is retried after the first function has completed its probe. | ||||
| CVE-2026-98755 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tty: vcc: zero-initialize control packet in vcc_send_ctl() The stack-allocated struct vio_vcc pkt was partially initialized, leaving the tag.stype_env field uninitialized before being sent via ldc_write(), potentially leaking kernel stack data to the LDC peer. | ||||
| CVE-2026-98752 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tty: port: fix tty_port_tty_vhangup() race Drivers rely on tty_port_tty_vhangup() to synchronously hang up their ports before tearing down resources as part of deregistration (e.g. on physical disconnect). If tty_port_tty_vhangup() races with another hangup it may however return before the port has been shut down. This is in turn can lead to use-after-free and NULL-pointer dereferences in racing ioctls (including a synchronous hangup) and in processing of racing asynchronous hangups (carrier loss). Add the missing serialisation to tty_port_tty_vhangup() and tty_port_hangup() so that the former does not return until the port has been shut down also when there is a racing hangup. Note that serial core does not use tty_port_hangup(), but it already holds the port mutex when clearing port->tty and shutting down the port in uart_hangup(). | ||||
| CVE-2026-98748 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: serial: 8250_bcm7271: fix use-after-free in brcmuart_remove() brcmuart_handle_irq() starts priv->hrt to work around a receive-timeout quirk of the 8250 core when hardware flow control is enabled; the timer callback brcmuart_hrtimer_func() dereferences priv. brcmuart_remove() cancels the hrtimer before it unregisters the port, so a receive-timeout interrupt that arrives in between re-arms the timer. After devm frees priv, the callback runs on freed memory. Unregister the port before cancelling the hrtimer. serial8250_unregister_port() shuts the port down and frees its IRQ, so brcmuart_handle_irq() can no longer restart the timer, and the final hrtimer_cancel() drains any timer that was armed before or during the unregister. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-98747 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: serial: core: fix NULL pointer dereference in serial_core_unregister_port() port->port_dev is NULL when no port device is installed: it is cleared on teardown, and never set if registration failed before serial_core_port_device_add(). serial_core_unregister_port() passes it straight to serial_core_get_ctrl_dev(), which dereferences it: KASAN: null-ptr-deref in range [0x0000000000000040-0x0000000000000047] RIP: serial_core_unregister_port Call Trace: serial8250_unregister_port serial8250_remove unbind_store Return early when there is no port device, and read port->port_dev under port_mutex. Also clear port->port_dev on the serial_core_register_port() error path, where the port device has already been removed. | ||||
| CVE-2026-98746 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: serial: ma35d1: Fix clock reference leak in ma35d1serial_probe() of_clk_get() returns a clock with a reference that has to be released with clk_put(). ma35d1serial_probe() never does that, so the reference is leaked on the probe error paths and also when the port is removed. Release it on the error paths and in ma35d1serial_remove(). | ||||
| CVE-2026-98745 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: arm64/fpsimd: signal: Forbid non-streaming SVE payload on SME-only systems When system_supports_sme() is true but system_supports_sve() is false, restoring a specifically crafted SVE signal context can result in the task erroneously having non-streaming SVE state. Subsequent attempts to manipulate the task's FPSIMD/SVE/SME state can result in a variety of problems, including fatal EL1 UNDEFs. In such configurations, the kernel always creates an SVE signal context when delivering a signal, and this can only be in one of two states: (1) SVE_SIG_FLAG_SM is set, and an SVE payload is present containing streaming mode SVE state. The recorded VL is the task's live streaming VL. (2) SVE_SIG_FLAG_SM is clear, and an SVE payload is not present. The FPSIMD context contains the non-streaming mode FPSIMD state. The recorded VL is 0. Currently restore_sve_fpsimd_context() correctly rejects cases where SVE_SIG_FLAG_SM is set and an SVE payload is not present, but fails to reject cases where SVE_SIG_FLAG_SM is clear and an SVE payload is present. Consequently, restore_sve_fpsimd_context() can place the task in a state where it has non-streaming SVE state even when this is not supported by HW. For example, this can cause a later EL1 UNDEF when the kernel attempts to restore the task's ZCR_EL1 value: | # ./sme-sigcontext-to-sve | Internal error: Oops - Undefined instruction: 0000000002000000 [#1] SMP | Modules linked in: | CPU: 0 UID: 0 PID: 131 Comm: sme-sigcontext- Not tainted 7.3.0-rc1 #1 PREEMPT | Hardware name: linux,dummy-virt (DT) | pstate: 61402009 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) | pc : fpsimd_restore_current_state+0x258/0x458 | lr : exit_to_user_mode_loop+0xb8/0x188 | sp : ffff80008056be40 | x29: ffff80008056be40 x28: fff00000c1670000 x27: 0000000000000000 | x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000 | x23: ffff80008056bec0 x22: 0000000000000008 x21: 0000000000000040 | x20: 0000000000000081 x19: 0000000008800010 x18: 0000000000000000 | x17: 0000fffffd412570 x16: 0000000000001000 x15: 0000fffffd4123b0 | x14: 0000fffffd412780 x13: 0000fffffd412be8 x12: 0000000047435300 | x11: 0000fffffd412570 x10: 0000000000000000 x9 : 0000000045585401 | x8 : fff00000c18a6c44 x7 : 0000000000000000 x6 : 0000000000000002 | x5 : 0000000000000002 x4 : ffff800080568000 x3 : 0000000000000001 | x2 : 0000000008800010 x1 : fff00000c1670000 x0 : 0000000008800000 | Call trace: | fpsimd_restore_current_state+0x258/0x458 (P) | exit_to_user_mode_loop+0xb8/0x188 | el0_svc+0x1cc/0x1d0 | el0t_64_sync_handler+0xa0/0xe4 | el0t_64_sync+0x198/0x19c | Code: d5384101 f9400020 53175c03 36b80de0 (d5381202) | ---[ end trace 0000000000000000 ]--- | Kernel panic - not syncing: Oops - Undefined instruction: Fatal exception in interrupt | Kernel Offset: 0x291fb1000000 from 0xffff800080000000 | PHYS_OFFSET: 0x40000000 | CPU features: 0x0,00000000,0052802f,ffb88f43,3afcf73f | Memory Limit: none Rework restore_sve_fpsimd_context() to reject cases where SVE_SIG_FLAG_SM is clear and an SVE payload is not present. As parse_user_sigframe() rejects SVE signal frames when neither SVE nor SME are supported, it isn't necessary for restore_sve_fpsimd_context() to handle the case where neither are supported. | ||||
| CVE-2026-98744 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: max98363: fix uninitialized stream_config->type stream_config is not initialized before being passed to sdw_stream_add_slave(). The type field may contain garbage and is later copied to stream->type by sdw_config_stream(). Zero-initialize stream_config so type defaults to SDW_STREAM_PCM. | ||||
| CVE-2026-98742 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: Serialize compat port-info ioctls The native sequencer ioctl path serializes handler calls with client->ioctl_mutex, but the translated port-info compat path invokes the same handlers through snd_seq_kernel_client_ctl() without taking that mutex. This lets concurrent compat CREATE_PORT requests pass the port-count check before any request reaches the serialized insertion. The computed integer port index can then exceed the address field range and wrap to an existing index. Subsequent subscriber teardown can resolve the duplicate address to the wrong port and access a freed subscriber. Take ioctl_mutex while dispatching converted port-info requests, matching the native ioctl path. All translated port-info commands share this helper, so their accesses to the client port state are serialized as well. | ||||
| CVE-2026-98738 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Serialize SMP remote OOB data access build_pairing_cmd() looks up remote OOB data and copies its contents without holding hdev->lock, which serializes the list's writers. After SMP finds an entry, a concurrent management Remove Remote OOB Data command can unlink and free it before SMP reads its present flag or copies its random and confirmation values. Removal can also invalidate an entry while the lookup is still traversing the list. KASAN reported: BUG: KASAN: slab-use-after-free in build_pairing_cmd+0x948/0x9b0 Call Trace: build_pairing_cmd+0x948/0x9b0 smp_recv_cb+0x459f/0x8110 l2cap_recv_frame+0xf14/0x9190 l2cap_recv_acldata+0xa64/0xd40 hci_rx_work+0x4ca/0x730 Allocated by task 87: hci_add_remote_oob_data+0x11d/0x530 add_remote_oob_data+0x282/0x400 hci_sock_sendmsg+0x1033/0x1ea0 Freed by task 93: hci_remote_oob_data_clear+0x108/0x1c0 remove_remote_oob_data+0x198/0x220 hci_sock_sendmsg+0x1033/0x1ea0 Taking hdev->lock in build_pairing_cmd() would recurse for callers that already hold it and invert the device-to-L2CAP lock order on the receive path. Add a per-device remote_oob_lock instead, held across the SMP lookup and copies and by the add, remove and clear helpers. Cover initialization and in-place updates as well, so SMP cannot read partially initialized or updated OOB values. Release the mutex on allocation failure, preserving the existing error return. The new critical sections acquire no device, connection or channel locks. Writers retain their existing hdev->lock protection, which continues to serialize the other readers without changing their locking or behavior. | ||||