Export limit exceeded: 16173 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (16173 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-5912 | 1 Lenovo | 1 Notebook | 2026-04-15 | 6.7 Medium |
| A potential memory leakage vulnerability was reported in some Lenovo Notebook products that may allow a local attacker with elevated privileges to write to NVRAM variables. | ||||
| CVE-2024-10573 | 1 Redhat | 1 Enterprise Linux | 2026-04-15 | 6.7 Medium |
| An out-of-bounds write flaw was found in mpg123 when handling crafted streams. When decoding PCM, the libmpg123 may write past the end of a heap-located buffer. Consequently, heap corruption may happen, and arbitrary code execution is not discarded. The complexity required to exploit this flaw is considered high as the payload must be validated by the MPEG decoder and the PCM synth before execution. Additionally, to successfully execute the attack, the user must scan through the stream, making web live stream content (such as web radios) a very unlikely attack vector. | ||||
| CVE-2024-21979 | 2026-04-15 | 5.3 Medium | ||
| An out of bounds write vulnerability in the AMD Radeon™ user mode driver for DirectX® 11 could allow an attacker with access to a malformed shader to potentially achieve arbitrary code execution. | ||||
| CVE-2024-21972 | 2026-04-15 | 5.3 Medium | ||
| An out of bounds write vulnerability in the AMD Radeon™ user mode driver for DirectX® 11 could allow an attacker with access to a malformed shader to potentially achieve arbitrary code execution. | ||||
| CVE-2024-2184 | 2026-04-15 | 9.8 Critical | ||
| Buffer overflow in identifier field of WSD probe request process of Small Office Multifunction Printers and Laser Printers(*) which may allow an attacker on the network segment to trigger the affected product being unresponsive or to execute arbitrary code.*:Satera MF740C Series/Satera MF640C Series/Satera LBP660C Series/Satera LBP620C Series firmware v12.07 and earlier, and Satera MF750C Series/Satera LBP670C Series firmware v03.09 and earlier sold in Japan.Color imageCLASS MF740C Series/Color imageCLASS MF640C Series/Color imageCLASS X MF1127C/Color imageCLASS LBP664Cdw/Color imageCLASS LBP622Cdw/Color imageCLASS X LBP1127C firmware v12.07 and earlier, and Color imageCLASS MF750C Series/Color imageCLASS X MF1333C/Color imageCLASS LBP674Cdw/Color imageCLASS X LBP1333C firmware v03.09 and earlier sold in US.i-SENSYS MF740C Series/i-SENSYS MF640C Series/C1127i Series/i-SENSYS LBP660C Series/i-SENSYS LBP620C Series/C1127P firmware v12.07 and earlier, and i-SENSYS MF750C Series/C1333i Series/i-SENSYS LBP673Cdw/C1333P firmware v03.09 and earlier sold in Europe. | ||||
| CVE-2020-26312 | 2026-04-15 | 8.1 High | ||
| Dotmesh is a git-like command-line interface for capturing, organizing and sharing application states. In versions 0.8.1 and prior, the unsafe handling of symbolic links in an unpacking routine may enable attackers to read and/or write to arbitrary locations outside the designated target folder. The routine `untarFile` attempts to guard against creating symbolic links that point outside the directory a tar archive is extracted to. However, a malicious tarball first linking `subdir/parent` to `..` (allowed, because `subdir/..` falls within the archive root) and then linking `subdir/parent/escapes` to `..` results in a symbolic link pointing to the tarball’s parent directory, contrary to the routine’s goals. This issue may lead to arbitrary file write (with same permissions as the program running the unpack operation) if the attacker can control the archive file. Additionally, if the attacker has read access to the unpacked files, they may be able to read arbitrary system files the parent process has permissions to read. As of time of publication, no patch for this issue is available. | ||||
| CVE-2025-33029 | 2 Intel, Microsoft | 4 Proset, Proset/wireless, Proset/wireless Software and 1 more | 2026-04-15 | 7.4 High |
| Out-of-bounds write for some Intel(R) PROSet/Wireless WiFi Software for Windows before version 23.160 within Ring 2: Device Drivers may allow a denial of service. Unprivileged software adversary with an unauthenticated user combined with a low complexity attack may enable denial of service. This result may potentially occur via adjacent access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (high) impacts. | ||||
| CVE-2024-7695 | 2026-04-15 | 7.5 High | ||
| Multiple switches are affected by an out-of-bounds write vulnerability. This vulnerability is caused by insufficient input validation, which allows data to be written to memory outside the bounds of the buffer. Successful exploitation of this vulnerability could result in a denial-of-service attack. | ||||
| CVE-2025-1883 | 2026-04-15 | 7.8 High | ||
| Out-Of-Bounds Write vulnerability exists in the OBJ file reading procedure in SOLIDWORKS eDrawings on Release SOLIDWORKS Desktop 2025. This vulnerability could allow an attacker to execute arbitrary code while opening a specially crafted OBJÂ file. | ||||
| CVE-2024-7139 | 2026-04-15 | 6.5 Medium | ||
| Due to an unchecked buffer length, a specially crafted L2CAP packet can cause a buffer overflow. This buffer overflow triggers an assert, which results in a temporary denial of service. If a watchdog timer is not enabled, a hard reset is required to recover the device. | ||||
| CVE-2024-7137 | 2026-04-15 | 6.5 Medium | ||
| The L2CAP receive data buffer for L2CAP packets is restricted to packet sizes smaller than the maximum supported packet size. Receiving a packet that exceeds the restricted buffer length may cause a crash. A hard reset is required to recover the crashed device. | ||||
| CVE-2025-29949 | 1 Amd | 17 Ryzen 5000 Series Desktop Processors, Ryzen 5000 Series Desktop Processors With Radeon Graphics, Ryzen 5000 Series Mobile Processors With Radeon Graphics and 14 more | 2026-04-15 | N/A |
| Insufficient input parameter sanitization in AMD Secure Processor (ASP) Boot Loader (legacy recovery mode only) could allow an attacker to write out-of-bounds to corrupt Secure DRAM potentially resulting in denial of service. | ||||
| CVE-2024-55884 | 2026-04-15 | 9 Critical | ||
| In the Mullvad VPN client 2024.6 (Desktop), 2024.8 (iOS), and 2024.8-beta1 (Android), the exception-handling alternate stack can be exhausted, leading to heap-based out-of-bounds writes in enable() in exception_logging/unix.rs, aka MLLVD-CR-24-01. NOTE: achieving code execution is considered non-trivial. | ||||
| CVE-2025-30015 | 2026-04-15 | 4.1 Medium | ||
| Due to incorrect memory address handling in ABAP SQL of SAP NetWeaver and ABAP Platform (Application Server ABAP), an authenticated attacker with high privileges could execute certain forms of SQL queries leading to manipulation of content in the output variable. This vulnerability has a low impact on the confidentiality, integrity and the availability of the application. | ||||
| CVE-2025-59728 | 1 Ffmpeg | 1 Ffmpeg | 2026-04-15 | 6.5 Medium |
| When calculating the content path in handling of MPEG-DASH manifests, there's an out-of-bounds NUL-byte write one byte past the end of the buffer.When we call xmlNodeGetContent below [0], it returns a buffer precisely allocated to match the string length, using strdup internally. If this buffer is not an empty string, it is assigned to root_url at [1].If the last (non-NUL) byte in this buffer is not '/' then we append '/' in-place at [2]. This will write two bytes into the buffer, starting at the last valid byte in the buffer, writing the NUL byte beyond the end of the allocated buffer. We recommend upgrading to version 8.0 or beyond. | ||||
| CVE-2025-59729 | 1 Ffmpeg | 1 Ffmpeg | 2026-04-15 | 6.8 Medium |
| When parsing the header for a DHAV file, there's an integer underflow in offset calculation that leads to reading the duration from before the start of the allocated buffer. If we load a DHAV file that is larger than MAX_DURATION_BUFFER_SIZE bytes (0x100000) for example 0x101000 bytes, then at [0] we have size = 0x101000. At [1] we have end_buffer_size = 0x100000, and at [2] we have end_buffer_pos = 0x1000. The loop then scans backwards through the buffer looking for the dhav tag; when it is found, we'll calculate end_pos based on a 32-bit offset read from the buffer. There is subsequently a check [3] that end_pos is within the section of the file that has been copied into end_buffer, but it only correctly handles the cases where end_pos is before the start of the file or after the section copied into end_buffer, and not the case where end_pos is within the the file, but before the section copied into end_buffer. If we provide such an offset, (end_pos - end_buffer_pos) can underflow, resulting in the subsequent access at [4] occurring before the beginning of the allocation. We recommend upgrading to version 8.0 or beyond. | ||||
| CVE-2025-32022 | 2026-04-15 | 4.6 Medium | ||
| Finit provides fast init for Linux systems. Finit's urandom plugin has a heap buffer overwrite vulnerability at boot which leads to it overwriting other parts of the heap, possibly causing random instabilities and undefined behavior. The urandom plugin is enabled by default, so this bug affects everyone using Finit 4.2 or later that do not explicitly disable the plugin at build time. This bug is fixed in Finit 4.12. Those who cannot upgrade or backport the fix to urandom.c are strongly recommended to disable the plugin in the call to the `configure` script. | ||||
| CVE-2025-0234 | 2026-04-15 | 5.3 Medium | ||
| Out-of-bounds vulnerability in curve segmentation processing of Generic PCL6 V4 Printer Driver / Generic UFR II V4 Printer Driver / Generic LIPSLX V4 Printer Driver. | ||||
| CVE-2025-0235 | 2026-04-15 | 5.3 Medium | ||
| Out-of-bounds vulnerability due to improper memory release during image rendering in Generic PCL6 V4 Printer Driver / Generic UFR II V4 Printer Driver / Generic LIPSLX V4 Printer Driver. | ||||
| CVE-2025-0236 | 2026-04-15 | 5.3 Medium | ||
| Out-of-bounds vulnerability in slope processing during curve rendering in Generic PCL6 V4 Printer Driver / Generic UFR II V4 Printer Driver / Generic LIPSLX V4 Printer Driver. | ||||