Export limit exceeded: 409268 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (409268 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74465 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: fix potential UAF on meter attach failure While attaching a newly created meter attach_meter() function makes the new meter visible to other CPUs but can still fail afterwards. On failure, it detaches the meter back and returns an error. However, this is an unexpected behavior for the ovs_meter_cmd_set() that uses a plain kfree(meter) on attach failure without waiting for RCU readers to stop using it, assuming it was never visible. This is never a problem for ovs-vswitchd as it always creates meters before creating any flows that use them. But the UAF can be triggered with a custom application using uAPI: BUG: KASAN: slab-use-after-free in ovs_meter_execute (net/openvswitch/meter.c:653) Read of size 8 at addr ffff88810d152650 by task meter/2508 Call Trace: ovs_meter_execute (net/openvswitch/meter.c:653) do_execute_actions (net/openvswitch/actions.c:1407) ovs_execute_actions (net/openvswitch/actions.c:1584) ovs_packet_cmd_execute (net/openvswitch/datapath.c:703) ... netlink_sendmsg (af_netlink.c:1900) Allocated by task 2519: __kasan_kmalloc (mm/kasan/common.c:398 mm/kasan/common.c:415) ovs_meter_cmd_set (net/openvswitch/meter.c:422) ... netlink_sendmsg (af_netlink.c:1900) Freed by task 2519: kfree (mm/slub.c:2705 mm/slub.c:6405 mm/slub.c:6720) ovs_meter_cmd_set (net/openvswitch/meter.c:479) ... netlink_sendmsg (af_netlink.c:1900) Fix that by making sure attach_meter() doesn't make the meter visible until all the checks are done and the function can't fail anymore. This also makes sure the "hash" value is calculated after the potential re-sizing of the table. Reported by Trend Micro's Zero Day Initiative as ZDI-CAN-31642. | ||||
| CVE-2026-74461 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: i2c: imx: Cancel hrtimer before clearing slave pointer In i2c_imx_unreg_slave(), the slave pointer is set to NULL after disabling interrupts. However, a pending interrupt might already have started the hrtimer (i2c_imx_slave_timeout) before the pointer was cleared. If the hrtimer fires after i2c_imx->slave is set to NULL, the timer callback i2c_imx_slave_finish_op() will call i2c_imx_slave_event() with a NULL slave pointer, which results in a use-after-free / NULL pointer dereference. Fix by canceling the hrtimer and waiting for it to complete after disabling interrupts, before clearing the slave pointer. | ||||
| CVE-2026-74456 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: can: peak_usb: peak_usb_start(): fix double free of transfer buffer on URB submit error In peak_usb_start(), each RX URB transfer buffer is allocated with kmalloc() and the URB is flagged URB_FREE_BUFFER so that the final usb_free_urb() also frees the transfer buffer. If usb_submit_urb() fails, the error path frees the buffer explicitly with kfree(buf) and then calls usb_free_urb(urb). Because URB_FREE_BUFFER is set, usb_free_urb() -> urb_destroy() frees the same buffer a second time, a double free of the transfer buffer. BUG: KASAN: double-free in usb_free_urb.part.0+0x91/0xb0 Free of addr ffff8881069ccb80 by task trigger.sh/285 Call Trace: kfree+0x113/0x3c0 usb_free_urb.part.0+0x91/0xb0 Drop the redundant kfree(buf); usb_free_urb() already releases the transfer buffer. This mirrors commit 03819abbeb11 ("net: usb: lan78xx: Fix double free issue with interrupt buffer allocation"). | ||||
| CVE-2026-74453 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Zero the tile state data array before each BIN job The binner BO is a single 16MB buffer split into 512KB slots that are handed out to jobs at submission time and recycled as jobs complete, without ever being cleared. Each slot holds the job's Tile State Data Array (TSDA) at its start, followed by the tile allocation pool. While the tile allocation pool is only walked by the render thread through branches the binner generated during the current job, the TSDA is the PTB's own per-tile bookkeeping and is consumed by the hardware itself. Although the kernel sets the "Auto-initialise Tile State Data Array" flag in the tile binning mode configuration, the PTB demonstrably still acts on stale tile state left by the slot's previous user: the binner ends up creating invalid command streams with invalid primitive streams and branches, which can cause GPU hangs as observed in [1][2]. Zero the TSDA when the job's binning slot is configured. This clears 48 bytes per tile (~24KB for a 1080p frame) in the submission path, and guarantees the PTB never sees another job's tile state. The tile count is only checked for being non-zero today, so the 8-bit fields it comes from can describe a tile state array almost six times larger than the slot it has to live in. Bound it before the slot is handed out, since such size decides how much of the slot is left for the tile alloc pool. | ||||
| CVE-2026-74450 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: fix pptable use-after-free amdgpu_dpm_get_pp_table() returns a pointer to a driver-owned power table after dropping adev->pm.mutex. The sysfs path then copies from that pointer. A concurrent pp_table write can replace and free the allocation during the copy, causing a use-after-free. Change the DPM interface to copy into caller-provided storage while the mutex is held. Keep the size-only query for attribute discovery without exposing the driver-owned pointer. (cherry picked from commit f6eed7acfd30099ef7baeb6ba45bb59daad80631) | ||||
| CVE-2026-74449 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix divide-by-zero in calculate_mcache_setting on zero viewport If a plane reaches calculate_mcache_setting with a zero-area viewport, calculate_mcache_setting exits early with num_mcaches == 0 and mvmpg_width/height == 0. This will cause a divide-by-zero panic and can also cause an underflow on num_mcaches. Fix this by changing calculate_mcache_setting to bool and adding guards after each calculate_mcache_row_bytes call. If num_mcaches or mvmpg_width/height is zero, return a false. Callers will propagate the failure as a rejected mode, which prevents the panic. (cherry picked from commit 29c0f7c655f47bcbd575ff75e58480df6ec3c9da) | ||||
| CVE-2026-74447 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: fix uint32_t overflow in EOP ring buffer size alignment eop_ring_buffer_size in struct queue_properties is a u32. In kfd_queue_acquire_buffers() the expected EOP buffer size is computed as ALIGN(eop_ring_buffer_size, PAGE_SIZE); ALIGN uses typeof(x), so the addition is done in 32-bit. A user-supplied size of 0xFFFFF001 wraps to 0, causing kfd_queue_buffer_get() to skip its exact-size check (gated on size != 0) and accept any BO mapped at the address. On GFX8/GFX9 the MQD cp_hqd_eop_control is then programmed for an 8KB EOP ring backed by a 4KB BO, so CP EOP writes can land past the buffer and fault the GPU. Cast the operand to u64 so the alignment is computed in 64-bit; the size check in kfd_queue_buffer_get() then rejects the oversized request. (cherry picked from commit ae443117b742c357bfef3a7bddabf76fcf86e9ef) | ||||
| CVE-2026-74446 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: hold event_mutex while checkpointing CRIU events kfd_criu_checkpoint_events() counts the entries in p->event_idr via kfd_get_num_events(), allocates an array sized to that count, and then walks the same IDR to fill it. Neither the count nor the walk holds p->event_mutex. The CRIU checkpoint caller holds only p->mutex. Event create and destroy (kfd_event_create()/kfd_event_destroy()) take p->event_mutex and do not take p->mutex, so a second thread in the same process can insert or remove events between the count and the walk. If an event is inserted, the walk iterates more entries than were counted and writes past the end of the ev_privs allocation; if an event is removed, the walk dereferences an entry that is being freed. Hold p->event_mutex across the count and the walk so both observe a consistent view of p->event_idr. The lock is released before copy_to_user(), which only touches the local buffer. The caller already holds p->mutex and the create/destroy paths never take p->mutex, so the p->mutex -> p->event_mutex order is not inverted and no deadlock is introduced. (cherry picked from commit ff57e223ab105795b05d3ef3f3c35a5a441bcbaa) | ||||
| CVE-2026-74444 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: validate DRAW_PRIMITIVES header size before division vmw_cmd_draw() computes maxnum = (header->size - sizeof(cmd->body)) / sizeof(*decl); where header->size is u32 and is taken straight from the user-supplied command stream. When header->size is less than sizeof(cmd->body) the unsigned subtraction wraps to nearly 4 GiB, producing a huge maxnum. Any user-controlled cmd->body.numVertexDecls then passes the bound and the loop dereferences decl[i] far past the end of the kernel command bounce buffer, producing an out-of-bounds read of kernel memory. Reject undersized headers up front. | ||||
| CVE-2026-74443 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: bound DMA command body size against suffix pointer vmw_cmd_dma() locates the DMA suffix at (unsigned long) &cmd->body + header->size - sizeof(*suffix) without checking that header->size is large enough to contain both cmd->body and the suffix. An undersized header makes the suffix pointer underflow back into the previous command in the bounce buffer. The verifier later writes suffix->maximumOffset, clobbering verified fields of an already-relocated earlier command -- a TOCTOU on the device-visible command stream that lets one command rewrite another's GMR id, surface id, or other authenticated fields. Reject the command if the body is too small for the suffix to fit. | ||||
| CVE-2026-74440 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe: Wait on external BO kernel fences in exec IOCTL Before arming a user job, xe_exec_ioctl() only added the VM's dma-resv KERNEL slot as a dependency. That slot covers rebinds and the kernel operations of the VM's private BOs, but not external BOs (bo->vm == NULL), which carry their kernel operations (evictions, moves, ...) in their own dma-resv KERNEL slot. The DMA_RESV_USAGE_KERNEL slot is the cross-driver contract for memory management operations that must complete before the BO or its backing store may be used: any accessor is required to wait on the KERNEL fences before touching the resv. By skipping the external BOs' KERNEL slots, the exec path violated that contract and could schedule a user job while a kernel operation on an external BO mapped by the VM was still in flight, racing against it and potentially reading or writing memory that was being moved. Replace the VM-only dependency with an iteration over every object locked by the exec, adding each object's KERNEL slot as a job dependency. This covers the VM resv (rebinds and private BOs) as well as every external BO, mirroring the drm_gpuvm_resv_add_fence() call that later publishes the job fence to the same set of objects. Long-running mode continues to skip this, as before. (cherry picked from commit a6b842acf3ddd1efc53a56de9260cfa718fb35e7) | ||||
| CVE-2026-74439 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Clear Present bit before tearing down scalable-mode context entry device_pasid_table_teardown() zeroes the 128-bit scalable-mode context entry with context_clear_entry() while the Present bit is still set. This creates a window where the hardware can fetch a torn entry, with some fields already zeroed while Present is still set, leading to unpredictable behavior or spurious faults. The context-cache invalidation is issued only after the entry has been zeroed, and intel_pasid_free_table() then frees the PASID directory pages, so the IOMMU can keep walking a stale Present=1 entry that points at freed memory. While x86 provides strong write ordering, the compiler may reorder the two 64-bit writes to the entry, and the hardware fetch is not guaranteed to be atomic with respect to multiple CPU writes. Commit c1e4f1dccbe9d ("iommu/vt-d: Clear Present bit before tearing down context entry") fixed this exact pattern in domain_context_clear_one() and the copied-context path, but device_pasid_table_teardown() was not converted. Align it with the "Guidance to Software for Invalidations" in the VT-d spec, Section 6.5.3.3, using the same ownership handshake as the sibling fix: clear only the Present bit, flush it to the IOMMU, perform the context-cache invalidation, and only then zero the rest of the entry. | ||||
| CVE-2026-74436 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: serialize kernel accept preallocation with socket teardown rxrpc_kernel_charge_accept() reads rx->backlog without any socket/backlog synchronization and passes that raw pointer into rxrpc_service_prealloc_one(). A concurrent rxrpc_discard_prealloc() sets rx->backlog = NULL and frees the backlog rings, so a kernel preallocation worker can keep using a freed struct rxrpc_backlog while updating *_backlog_head/tail and array slots. Serialize the state check and backlog lookup with the socket lock, and reject kernel preallocation once teardown has disabled listening or discarded the service backlog. | ||||
| CVE-2026-74427 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: afs: Fix netns teardown to cancel the preallocation charger Fix the teardown of an afs network namespace to make sure it cancels the work item that keeps the preallocated rxrpc call/conn/peer queue charged before incoming calls are disabled (i.e. listen 0). Also, if net->live is false because the afs netns is being deleted, make afs_charge_preallocation() skip charging and make afs_rx_new_call() avoid requeuing the charger. (This was found by AI review). | ||||
| CVE-2026-74417 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/radeon: fix integer overflow in radeon_align_pitch() radeon_align_pitch() has the same kind of overflow issue as the old amdgpu helper: both the alignment round-up add and the final 'aligned * cpp' calculation can overflow signed int. If that wraps, radeon_mode_dumb_create() can end up returning an invalid pitch or creating a zero-sized dumb buffer. Fix this by using check_add_overflow() for the alignment round-up and check_mul_overflow() for the final pitch calculation, returning 0 on overflow. Also reject zero pitch and size in radeon_mode_dumb_create(). Found via AST-based call-graph analysis using sqry. | ||||
| CVE-2026-74413 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: fix wrong pci_get_drvdata type in AER handlers rtw89 stores an ieee80211_hw pointer via pci_set_drvdata() at probe time, but io_error_detected() and io_resume() retrieve it as a net_device pointer. This causes netif_device_detach/attach to operate on an ieee80211_hw struct, reading and writing at wrong offsets. The adjacent io_slot_reset() already does it correctly. Use ieee80211_stop_queues/wake_queues instead, consistent with every other queue stop/start path in the driver. Tested on RTL8852CE by calling the handlers from a test module before and after the fix. | ||||
| CVE-2026-74412 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: fix wrong pci_get_drvdata type in AER handlers rtw88 stores an ieee80211_hw pointer via pci_set_drvdata() at probe time, but io_error_detected() and io_resume() retrieve it as a net_device pointer. This causes netif_device_detach/attach to operate on an ieee80211_hw struct, reading and writing at wrong offsets. Use ieee80211_stop_queues/wake_queues instead, consistent with every other queue stop/start path in the driver. | ||||
| CVE-2026-74411 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: Correct data type for scan index to avoid infinite loop A kernel soft lockup was observed during Wi-Fi scanning on the 6GHz band. The CPU becomes stuck in rtw89_hw_scan_add_chan_ax for over 20 seconds, leading to a system panic. RIP points to 0f b6 c3 (movzbl %bl, %eax), which zero-extends the low 8 bits of RBX into RAX. RBX (the counter i) has reached a huge value: 0x137466a1. watchdog: BUG: soft lockup - CPU#2 stuck for 26s! [kworker/u16:4:6124] Workqueue: events_unbound cfg80211_wiphy_work [cfg80211] RIP: 0010:rtw89_hw_scan_add_chan_ax+0xb3/0x6e0 [rtw89_core] Code: a0 48 89 45 a8 44 89 6d 9c 44 89 75 98 eb 29 66 66 2e 0f 1f 84 00 00 00 00 00 66 66 2e 0f 1f 84 00 00 00 00 00 66 90 83 c3 01 <0f> b6 c3 41 3b 44 24 74 0f 83 0b 02 00 00 0f b6 c3 48 8d 14 80 49 RSP: 0018:ffffcb48cbaa39f8 EFLAGS: 00000202 RAX: 0000000000000005 RBX: 00000000137466a1 RCX: 0000000000000000 RDX: ffff89ffc9d851a8 RSI: 0000000000004f0d RDI: 0000000096af0130 RBP: ffffcb48cbaa3a60 R08: 0000000000000000 R09: ffff8a00b7502080 R10: ffff8a00b75ff600 R11: 0000000000000000 R12: ffff89ffc7553870 R13: ffff8a00b7ac8f19 R14: ffff8a00b75020d8 R15: ffff89ffc3d54d80 FS: 0000000000000000(0000) GS:ffff8a014f962000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007558d7f9f4c4 CR3: 0000000178040001 CR4: 00000000001706f0 Call Trace: <TASK> rtw89_hw_scan_prep_chan_list_ax+0x8a/0x400 [rtw89_core] rtw89_hw_scan_start+0x546/0x8a0 [rtw89_core] ? rtw89_fw_h2c_default_cmac_tbl+0x13c/0x1f0 [rtw89_core] rtw89_ops_hw_scan+0xae/0x120 [rtw89_core] drv_hw_scan+0xbb/0x180 [mac80211] __ieee80211_start_scan+0x2fc/0x750 [mac80211] ieee80211_request_scan+0xe/0x20 [mac80211] ieee80211_scan+0x123/0x190 [mac80211] rdev_scan+0x40/0x110 [cfg80211] cfg80211_scan_6ghz+0x5a1/0xa30 [cfg80211] By objdump with source: for (i = 0; i < req->n_6ghz_params; i++) { 5fbc0: 83 c3 01 add $0x1,%ebx --> i++ 5fbc3: 0f b6 c3 movzbl %bl,%eax --> get counter fbc6: 41 3b 44 24 74 cmp 0x74(%r12),%eax * RBX: 00000000137466a1 -> %bl = a1 -> EAX = 000000a1 (161) | ||||
| CVE-2026-74410 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: fix OOB read from firmware RX descriptor exceeding DMA buffer In rtw_pci_rx_napi(), new_len is computed as the sum of pkt_len (14-bit descriptor field, max 16383) and pkt_offset (drv_info_sz + shift, both firmware-controlled). The result can exceed RTK_PCI_RX_BUF_SIZE (11478), causing an out-of-bounds read from the pre-allocated DMA buffer when skb_put_data copies new_len bytes. The USB transport already validates this (rtw_usb_rx_data_put checks against RTW_USB_MAX_RECVBUF_SZ); the PCIe path does not. Add a check that new_len does not exceed the DMA buffer size. | ||||
| CVE-2026-74409 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: add bounds check on firmware mac_id in link lookup The mac_id field in RX descriptors is 8 bits wide (0-255), but assoc_link_on_macid[] has only RTW89_MAX_MAC_ID_NUM (128) entries. While the driver currently assigns mac_id values below 128, the descriptor value comes from firmware and is not validated before use as an array index. Add a defensive bounds check in rtw89_assoc_link_rcu_dereference() to guard against out-of-range firmware values. | ||||