Export limit exceeded: 25283 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25283 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74408 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k: fix OOB access from firmware tx status queue ID ath_tx_edma_tasklet() accesses sc->tx.txq[ts.qid] where ts.qid is a 4-bit hardware field (0-15), but the txq array only has ATH9K_NUM_TX_QUEUES (10) entries. A qid >= 10 causes an OOB array access. Add a bounds check on ts.qid before using it as an array index. | ||||
| CVE-2026-74407 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: cancel SSR work items during PCI shutdown A reboot can crash the kernel if it overlaps with WLAN firmware crash recovery (SSR). The crash is a NULL pointer dereference in the MHI teardown path while freeing DMA-backed MHI contexts. Simplified trace: dma_free_attrs mhi_deinit_dev_ctxt [mhi] ath11k_pci_power_down [ath11k_pci] ath11k_pci_shutdown [ath11k_pci] device_shutdown kernel_restart On the host side, SSR is driven by the MHI RDDM callback, which queues reset_work to perform device recovery. reset_work power-cycles the device by calling ath11k_hif_power_down() followed by ath11k_hif_power_up(). The power-down phase deinitializes MHI and frees DMA resources. Shutdown/reboot runs fully asynchronously with this RDDM-driven SSR recovery flow. As a result, the shutdown path (ath11k_pci_shutdown() -> ath11k_pci_power_down()) can race with the SSR recovery sequence. Fix this by canceling SSR-related work items during PCI shutdown, marking the device as unregistering, and serializing the RDDM callback path that checks and queues reset_work. This ensures that no new SSR recovery work can be queued once teardown has started, and that any in-flight recovery work is fully synchronized before device power-down, preventing MHI teardown and DMA resource freeing from running more than once. Note: This issue only affects PCI/MHI-based devices. AHB-based ath11k devices do not queue reset_work in normal SSR flows. Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-04866.5-QCAHSPSWPL_V1_V2_SILICONZ_IOE-1 | ||||
| CVE-2026-74406 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: vxlan: Fix potential null-ptr-deref in vxlan_gro_prepare_receive(). udp_tunnel_sock_release() could set sk->sk_user_data to NULL while vxlan_gro_prepare_receive() is running. Let's check if rcu_dereference_sk_user_data() is NULL after skb_gro_remcsum_init(). | ||||
| CVE-2026-74405 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: OPP: Fix race between OPP addition and lookup A race exists between dev_pm_opp_add_dynamic() and dev_pm_opp_find_freq_exact(): CPU0 (add) CPU1 (lookup) ------------------------------- ------------------------------ _opp_add() mutex_lock() list_add(&new_opp->node, head) mutex_unlock() _opp_table_find_key() mutex_lock() dev_pm_opp_get(opp) kref_get() mutex_unlock() kref_init(&new_opp->kref) dev_pm_opp_put() kref_put_mutex() The newly added OPP is inserted into the list before its kref is initialized. A concurrent lookup can find this OPP and increment its reference count while it is still uninitialized, leading to refcount corruption and a potential premature free. Fix this by initializing ->kref and ->opp_table before making the OPP visible via list_add(). This ensures any concurrent lookup observes a fully initialized object. [ Viresh: Updated commit log ] | ||||
| CVE-2026-74404 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - Fix snp_filter_reserved_mem_regions() off-by-one Sashiko notes: > regarding the bounds check in snp_filter_reserved_mem_regions() > called via walk_iomem_res_desc(): does the check > if ((range_list->num_elements * 16 + 8) > PAGE_SIZE) > allow an off-by-one heap buffer overflow? > > If range_list->num_elements is 255, 255 * 16 + 8 = 4088, which is <= 4096. > Writing range->base (8 bytes) fills 4088-4095, but writing range->page_count > (4 bytes) would write to 4096-4099, overflowing the kzalloc-allocated > PAGE_SIZE buffer. Fix this by accounting for the entry about to be written to, in addition to the entries that are already allocated. | ||||
| CVE-2026-74401 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: dlm: fix add msg handle in send_queue ordered In a benchmark scenario triggering a lot of requests that triggers a lot of DLM messages on the network it can be that the mh->seq is not ordered according the oldest seq number. This ordering is required by dlm_receive_ack as "before(mh->seq, seq)" will stop to check for older sequence numbers that are ordered in the tail of "node->send_queue". The side effects of not having it correct ordered regarding "before(mh->seq, seq)" are refcounting issues and use-after free. I only was able to reproduce this issue in a experimental DLM branch and a user space DLM benchmark that uses io_uring. After changing this I don't experienced any refcounting with the sending buffer issues anymore. | ||||
| CVE-2026-74398 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: addrconf: bail out of dad_failure when state is no longer POSTDAD addrconf_dad_failure() transitions ifp->state from DAD to POSTDAD via addrconf_dad_end(), which drops ifp->lock on return. The lock is re-acquired after net_info_ratelimited(). A concurrent ipv6_del_addr() can take the lock in that window, set ifp->state to DEAD and run list_del_rcu(&ifp->if_list). addrconf_dad_failure() then overwrites DEAD with ERRDAD at errdad: and schedules a new dad_work. The work calls ipv6_del_addr() again, hitting the already-poisoned list entry: general protection fault: 0000 [#1] SMP NOPTI CPU: 4 PID: 217 Comm: kworker/4:1 Workqueue: ipv6_addrconf addrconf_dad_work RIP: 0010:ipv6_del_addr+0xe9/0x280 RAX: dead000000000122 Call Trace: addrconf_dad_stop+0x113/0x140 addrconf_dad_work+0x28c/0x430 process_one_work+0x1eb/0x3b0 worker_thread+0x4d/0x400 kthread+0x104/0x140 ret_from_fork+0x35/0x40 Fold the addrconf_dad_end() logic into addrconf_dad_failure() under a single ifp->lock critical section. The STABLE_PRIVACY branch temporarily drops ifp->lock around address regeneration, so at lock_errdad: verify the state is still POSTDAD before transitioning to ERRDAD; bail out otherwise to avoid overwriting a state set by another path while the lock was released. | ||||
| CVE-2026-74397 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: IB/mlx5: Fix transport-domain rollback and initialize lb mutex earlier mlx5_ib_alloc_transport_domain() allocates a transport domain and then may fail in mlx5_ib_enable_lb(). In that case, the allocated TD is leaked. Fix this by deallocating the TD when mlx5_ib_enable_lb() returns an error. Also return 0 explicitly in the no-loopback-capability success branch, and move dev->lb.mutex initialization to mlx5_ib_stage_init_init(). | ||||
| CVE-2026-74396 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix UMR XLT cleanup on ODP populate failure mlx5r_umr_update_xlt() allocates and DMA maps an XLT buffer with mlx5r_umr_create_xlt(). The buffer is released by the common cleanup path through mlx5r_umr_unmap_free_xlt(). After mlx5_odp_populate_xlt() became fallible, its error path returned directly and skipped that cleanup. This leaks the XLT DMA mapping and buffer. If the emergency XLT page was used, it also leaves xlt_emergency_page_mutex locked. Break out of the loop so execution falls through the existing cleanup path. | ||||
| CVE-2026-74394 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/srpt: fix integer overflow in immediate data length check imm_buf->len is a user-controlled uint32_t received from the network. Adding it to imm_data_offset without overflow checking allows a malicious initiator to send len=0xFFFFFFFF, causing req_size to wrap around to a small value, bypassing the bounds check, and subsequently passing a ~4GB length to sg_init_one(). Use check_add_overflow() to detect wrapping before the comparison. | ||||
| CVE-2026-74390 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Fix out-of-bounds write in irdma_copy_user_pgaddrs The irdma_copy_user_pgaddrs function loops through all of the umem DMA blocks to populate the PBLEs and will stop when either the last DMA block is reached or palloc->total_cnt is reached. The issue is that the logic for checking palloc->total_cnt would only work for non-zero values. When irdma_setup_pbles is called with lvl==0, it calls irdma_copy_user_pgaddrs with palloc->total_cnt==0, which means the only way to break out of the loop is to reach the last umem DMA block, which means it could end up going beyond the fixed size of 4 iwmr->pgaddrmem array that is used in the lvl==0 case. In the case of QP/CQ/SRQ rings, the value of lvl is determined by a separate input (for example, req.cq_pages in the case of a CQ). So, we must perform explicit checking to ensure we don't overflow the pgaddrmem array if the user provides a umem that consists of more blocks than their provided req.cq_pages. | ||||
| CVE-2026-74388 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: oss: Fix UAF at handling events with embedded SysEx data The OSS sequencer processes the input MIDI bytes into a sequencer event to be dispatched later (in snd_seq_oss_midi_putc() called from snd_seq_oss_process_event()). When it's a SysEx data, the event record contains data.ext.ptr pointer to the original SysEx bytes, and the referred data is copied into the pool afterwards at dispatching. The problem is that, if the sequencer port gets closed concurrently before the dispatch, the OSS sequencer core also releases the resources (in snd_seq_oss_midi_check_exit_port()), while the pending event may hold a stale pointer, eventually leading to a UAF at a later dispatch. Fortunately, there is already a refcounting mechanism (snd_use_lock_t) for the OSS MIDI device access, and for addressing the issue above, we just need to extend the refcount until the event gets dispatched. This patch extends snd_seq_oss_process_event() to give back the refcount object, which is in turn released after calling the sequencer dispatcher with the given event in the caller side. According to the original report, KASAN report as below: KASAN slab-use-after-free in snd_seq_event_dup+0x40c/0x470 RIP: 0033:0x7f2cb66a6340 Read of size 6 Call trace: dump_stack_lvl+0x73/0xb0 (?:?) print_report+0xd1/0x650 (?:?) srso_alias_return_thunk+0x5/0xfbef5 (?:?) __virt_addr_valid+0x1a7/0x340 (?:?) kasan_complete_mode_report_info+0x64/0x200 (?:?) kasan_report+0xf7/0x130 (?:?) snd_seq_event_dup+0x40c/0x470 (?:?) kasan_check_range+0x10c/0x1c0 (?:?) __asan_memcpy+0x27/0x70 (?:?) snd_seq_event_dup+0x9/0x470 (?:?) snd_seq_client_enqueue_event+0x139/0x240 (?:?) _raw_spin_unlock_irqrestore+0x4b/0x60 (?:?) snd_seq_kernel_client_enqueue+0x102/0x120 (?:?) snd_seq_oss_write+0x416/0x4e0 (?:?) apparmor_file_permission+0x20/0x30 (?:?) odev_write+0x3b/0x60 (?:?) vfs_write+0x1ce/0x850 (?:?) lock_release+0xc8/0x2a0 (?:?) __kasan_check_write+0x18/0x20 (?:?) __mutex_unlock_slowpath+0x129/0x510 (?:?) ksys_write+0xe1/0x180 (?:?) mutex_unlock+0x16/0x20 (?:?) odev_ioctl+0x65/0xc0 (?:?) __x64_sys_write+0x46/0x60 (?:?) x64_sys_call+0x7d/0x20d0 (?:?) do_syscall_64+0xc1/0x360 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?) | ||||
| CVE-2026-96957 | 3 Apple, Linux, Microsoft | 7 Macos, Linux Kernel, .net and 4 more | 2026-10-16 | 8.8 High |
| Improper verification of cryptographic signature in .NET allows an unauthorized attacker to bypass a security feature over a network. | ||||
| CVE-2026-96958 | 3 Apple, Linux, Microsoft | 20 Macos, Linux Kernel, .net and 17 more | 2026-10-16 | 7.5 High |
| Inefficient algorithmic complexity in .NET allows an unauthorized attacker to deny service over a network. | ||||
| CVE-2026-96959 | 3 Apple, Linux, Microsoft | 20 Macos, Linux Kernel, .net and 17 more | 2026-10-16 | 7.5 High |
| Allocation of resources without limits or throttling in .NET allows an unauthorized attacker to deny service over a network. | ||||
| CVE-2026-96960 | 3 Apple, Linux, Microsoft | 20 Macos, Linux Kernel, .net and 17 more | 2026-10-16 | 7.5 High |
| Asymmetric resource consumption (amplification) in .NET allows an unauthorized attacker to deny service over a network. | ||||
| CVE-2026-43503 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: skbuff: propagate shared-frag marker through frag-transfer helpers Two frag-transfer helpers (__pskb_copy_fclone() and skb_shift()) fail to propagate the SKBFL_SHARED_FRAG bit in skb_shinfo()->flags when moving frags from source to destination. __pskb_copy_fclone() defers the rest of the shinfo metadata to skb_copy_header() after copying frag descriptors, but that helper only carries over gso_{size,segs, type} and never touches skb_shinfo()->flags; skb_shift() moves frag descriptors directly and leaves flags untouched. As a result, the destination skb keeps a reference to the same externally-owned or page-cache-backed pages while reporting skb_has_shared_frag() as false. The mismatch is harmful in any in-place writer that uses skb_has_shared_frag() to decide whether shared pages must be detoured through skb_cow_data(). ESP input is one such writer (esp4.c, esp6.c), and a single nft 'dup to <local>' rule -- or any other nf_dup_ipv4() / xt_TEE caller -- is enough to land a pskb_copy()'d skb in esp_input() with the marker stripped, letting an unprivileged user write into the page cache of a root-owned read-only file via authencesn-ESN stray writes. Set SKBFL_SHARED_FRAG on the destination whenever frag descriptors were actually moved from the source. skb_copy() and skb_copy_expand() share skb_copy_header() too but linearize all paged data into freshly allocated head storage and emerge with nr_frags == 0, so skb_has_shared_frag() returns false on its own; they need no change. The same omission exists in skb_gro_receive() and skb_gro_receive_list(). The former moves the incoming skb's frag descriptors into the accumulator's last sub-skb via two paths (a direct frag-move loop and the head_frag + memcpy path); the latter chains the incoming skb whole onto p's frag_list. Downstream skb_segment() reads only skb_shinfo(p)->flags, and skb_segment_list() reuses each sub-skb's shinfo as the nskb -- both p and lp must carry the marker. The same omission also exists in tcp_clone_payload(), which builds an MTU probe skb by moving frag descriptors from skbs on sk_write_queue into a freshly allocated nskb. The helper falls into the same family and warrants the same fix for consistency; no TCP TX-side in-place writer is currently known to reach a user page through this gap, but a future consumer depending on the marker would regress silently. The same omission exists in skb_segment(): the per-iteration flag merge takes only head_skb's flag, and the inner switch that rebinds frag_skb to list_skb on head_skb-frags exhaustion does not fold the new frag_skb's flag into nskb. Fold frag_skb's flag at both sites so segments drawing frags from frag_list members carry the marker. | ||||
| CVE-2026-99999 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ipv4: validate checksum_start before completing checksum If a packet with bad checksum metadata gets into the ipv4 stack, skb_checksum_help can corrupt the network header and cause a bunch of mischief. This was discovered and reported by Paulos, and has been reporoduced by others independently since. We really shouldn't allow such packets in, but as a defence in depth measure, let's also check before we complete the checksum. A more complete validation at input is forthcoming, but needs more work. | ||||
| CVE-2026-72108 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dm thin metadata: fix metadata snapshot consistency on commit failure __reserve_metadata_snap() and __release_metadata_snap() modify the superblock's held_root directly in the block_manager's buffer. If the subsequent metadata commit fails, the held_root gets flushed to disk through the abort_transaction path, resulting in inconsistent metadata. Reproducer 1: __reserve_metadata_snap() 1. Create a 2 MiB metadata device and make the region after the 14th block inaccessible, to trigger metadata commit failure in the subsequent reserve_metadata_snap operation. The 14th block will be the shadow destination for the index block. dmsetup create tmeta --table "0 112 linear /dev/sdc 0 112 3984 error" 2. Create a 16 MiB thin-pool dmsetup create tdata --table "0 32768 zero" dd if=/dev/zero of=/dev/mapper/tmeta bs=4k count=1 dmsetup create tpool --table "0 32768 thin-pool /dev/mapper/tmeta \ /dev/mapper/tdata 128 0 1 skip_block_zeroing" 3. Take a metadata snapshot to trigger metadata commit failure and transaction abort. However, the held_root is written to disk, breaking metadata consistency. dmsetup message tpool 0 "reserve_metadata_snap" thin_check v1.2.2 result: Bad reference count for metadata block 6. Expected 2, but space map contains 1. Bad reference count for metadata block 7. Expected 2, but space map contains 1. Bad reference count for metadata block 13. Expected 1, but space map contains 0. Reproducer 2: __release_metadata_snap() 1. Create a 2 MiB metadata device and make the region after the 16th block inaccessible, to trigger metadata commit failure in the subsequent release_metadata_snap operation. The 16th block will be the shadow destination for the index block. dmsetup create tmeta --table "0 128 linear /dev/sdc 0 128 3968 error" 2. Create a 16 MiB thin-pool dmsetup create tdata --table "0 32768 zero" dd if=/dev/zero of=/dev/mapper/tmeta bs=4k count=1 dmsetup create tpool --table "0 32768 thin-pool /dev/mapper/tmeta \ /dev/mapper/tdata 128 0 1 skip_block_zeroing" 3. Reserve then release the metadata snapshot, to trigger metadata commit failure and transaction abort. The held_root gets removed from the on-disk superblock, causing inconsistent metadata. dmsetup message tpool 0 "reserve_metadata_snap" dmsetup message tpool 0 "release_metadata_snap" thin_check v1.2.2 result: Bad reference count for metadata block 6. Expected 1, but space map contains 2. Bad reference count for metadata block 7. Expected 1, but space map contains 2. 1 metadata blocks have leaked. Fix by deferring the held_root update to commit time. Additionally, move the existing-snapshot check in __reserve_metadata_snap before the shadow operation to avoid unnecessary work. In __release_metadata_snap, clear pmd->held_root before btree deletion so partial failure leaks blocks rather than leaving a stale reference, and unlock the snapshot block before decrementing its refcount. | ||||
| CVE-2026-72107 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dm era: fix out-of-bounds memory access for non-zero start sector dm-era tracks writes in target-relative blocks, but era_map() calculates the writeset block before applying the target offset. Tables with a non-zero start sector can therefore pass an absolute mapped-device block to metadata_current_marked(). If the absolute block is beyond the current writeset size, writeset_marked() tests past the end of the in-core bitset. KASAN reports this as a vmalloc-out-of-bounds access. Apply the target offset before calculating the era block so writeset lookups use the target-relative block number. | ||||