Export limit exceeded: 410490 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (410490 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98510 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/vm: nuke PTs only after unlinking contested VMAs In xe_vm_close_and_put(), external-BO VMAs are queued on the contested list for deferred destruction via xe_vma_destroy_unlocked(). However, xe_vm_pt_destroy() was previously invoked before processing contested VMAs, destroying vm->pt_root while those VMAs were still linked to their respective buffer objects (vm_bo->list.gpuva). If a concurrent thread evicts one of those shared buffer objects, xe_bo_trigger_rebind() holding only bo->resv walks the BO's VMAs and, in fault mode, calls xe_vm_invalidate_vma() -> xe_pt_zap_ptes(). Because vm->pt_root[tile->id] is already NULL, dereferencing pt->level causes a NULL ptr deref. Fix this by deferring xe_vm_free_scratch() and xe_vm_pt_destroy() until after all contested VMAs have been unlinked and destroyed. User is reporting hitting a NULL ptr deref in xe_pt_zap_ptes(), which could be explained by this race. (cherry picked from commit c2863648959489767f08892fd6e90577d2ea0b6a) | ||||
| CVE-2026-98515 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: fix double-free in nvif_vmm_dtor On failure, nouveau_cli_init() calls nouveau_cli_fini() to tear the client down. Then, nouveau_drm_open() also enters into its cleanup path and calls nouveau_cli_fini() AGAIN. nouveau_cli_fini() calls nouveau_vmm_fini(): void nouveau_vmm_fini(struct nouveau_vmm *vmm) { nouveau_svmm_fini(&vmm->svmm); nvif_vmm_dtor(&vmm->vmm); vmm->cli = NULL; } Inside nvif_vmm_dtor(), vmm->page is freed unconditionally: void nvif_vmm_dtor(struct nvif_vmm *vmm) { kfree(vmm->page); nvif_object_dtor(&vmm->object); } vmm->page is never cleared after being freed, so the second call of nvif_vmm_dtor() will cause a double-free. Found by fuzzing the nouveau driver with a modified Syzkaller: BUG: KASAN: double-free in nvif_vmm_dtor+0x31/0x50 drivers/gpu/drm/nouveau/nvif/vmm.c:194 Free of addr ffff888010fcdc30 by task syz.0.173/2567 CPU: 1 UID: 0 PID: 2567 Comm: syz.0.173 Not tainted 7.2.0 #24 PREEMPT(lazy) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x95/0xe0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xcb/0x5a0 mm/kasan/report.c:482 kasan_report_invalid_free+0xaa/0xd0 mm/kasan/report.c:557 check_slab_allocation+0xe4/0x110 mm/kasan/common.c:235 kasan_slab_pre_free include/linux/kasan.h:199 [inline] slab_free_hook mm/slub.c:2622 [inline] slab_free mm/slub.c:6377 [inline] kfree+0x192/0x590 mm/slub.c:6692 nvif_vmm_dtor+0x31/0x50 drivers/gpu/drm/nouveau/nvif/vmm.c:194 nouveau_vmm_fini+0x16/0x50 drivers/gpu/drm/nouveau/nouveau_vmm.c:127 nouveau_cli_fini+0x10e/0x210 drivers/gpu/drm/nouveau/nouveau_drm.c:225 nouveau_drm_open+0x24e/0x740 drivers/gpu/drm/nouveau/nouveau_drm.c:1255 drm_file_alloc+0x5f2/0xad0 drivers/gpu/drm/drm_file.c:176 drm_open_helper+0x1d7/0x4a0 drivers/gpu/drm/drm_file.c:335 drm_open+0x190/0x3d0 drivers/gpu/drm/drm_file.c:388 drm_stub_open+0x1f2/0x460 drivers/gpu/drm/drm_drv.c:1211 chrdev_open+0x21c/0x660 fs/char_dev.c:411 do_dentry_open+0x59d/0x12b0 fs/open.c:947 vfs_open+0x82/0x390 fs/open.c:1052 do_open fs/namei.c:4700 [inline] path_openat+0x2345/0x3420 fs/namei.c:4863 do_file_open+0x207/0x460 fs/namei.c:4892 do_sys_openat2+0xd1/0x1d0 fs/open.c:1368 do_sys_open fs/open.c:1374 [inline] __do_sys_openat fs/open.c:1390 [inline] __se_sys_openat fs/open.c:1385 [inline] __x64_sys_openat+0x144/0x200 fs/open.c:1385 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x115/0x690 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fc6d687594d Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fc6d5295008 EFLAGS: 00000246 ORIG_RAX: 0000000000000101 RAX: ffffffffffffffda RBX: 00007fc6d6b06180 RCX: 00007fc6d687594d RDX: 0000000000022501 RSI: 0000200000000000 RDI: ffffffffffffff9c RBP: 00007fc6d691c303 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fc6d6b06218 R14: 00007fc6d6b06180 R15: 00007ffd9451d760 </TASK> Allocated by task 2567 on cpu 1 at 163.593900s: kasan_save_stack+0x24/0x50 mm/kasan/common.c:57 kasan_save_track+0x17/0x60 mm/kasan/common.c:78 poison_kmalloc_redzone mm/kasan/common.c:398 [inline] __kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:415 kasan_kmalloc include/linux/kasan.h:263 [inline] __do_kmalloc_node mm/slub.c:5334 [inline] __kmalloc_noprof+0x304/0x7c0 mm/slub.c:5359 _kmalloc_noprof include/linux/slab.h:992 [inline] nvif_vmm_ctor+0x3c0/0x7e0 drivers/gpu/drm/nouveau/nvif/vmm.c:237 nouveau_vmm_init+0x40/0x90 drivers/gpu/drm/nouveau/nouveau_vmm.c:134 nouveau_cli_init+0x7b9/0 ---truncated--- | ||||
| CVE-2026-98518 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/nouveau/dmem: pin VRAM for the whole registered range Commit c32287471077 ("gpu/drm/nouveau: enable THP support for GPU memory migration") grew the device-private region that nouveau_dmem_chunk_alloc() registers from DMEM_CHUNK_SIZE to DMEM_CHUNK_SIZE * NR_CHUNKS, but left the VRAM buffer object backing that region at DMEM_CHUNK_SIZE. nouveau_dmem_page_addr() returns chunk->bo->offset plus the page's offset within the registered region, so every page past the first chunk resolves to VRAM outside the buffer object. Size the buffer object to the region it backs. | ||||
| CVE-2026-98520 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: fix use-after-free and multi-container gap in kfd_dev_mapping kfd_dev_mapping caches the address_space of the first /dev/kfd opener so that the GPU reset path can call unmap_mapping_range() to zap all userspace mappings of doorbell and MMIO ranges. This design has two bugs that both manifest under SRIOV with multiple containers: 1. Use-after-free / rwsem deadlock. The cached pointer refers to an inode owned by the first opener's container. When that container exits and its inode is released, kfd_dev_mapping becomes a dangling pointer. A subsequent GPU reset dereferences it inside unmap_mapping_range(), which takes i_mmap_rwsem on the freed inode, causing a hard hang observable as an uninterruptible rwsem wait. 2. Multi-container gap. Only the first opener's address_space is cached; VMAs created by later openers live in a different address_space and are never reached by unmap_mapping_range(). After a GPU reset those stale mappings keep doorbell and MMIO pages accessible to guest userspace with no GPU behind them, risking PCIe transaction timeouts and NMI panics. Fix both bugs with the same approach used by DRM core (drm_drv.c): create a private pseudo-filesystem at module init time and allocate one anonymous inode from it. In kfd_open() redirect every opener's file->f_mapping to that inode's address_space. The inode is module-owned, lives exactly as long as the amdgpu module, and collects VMAs from all openers in one address_space. A single unmap_mapping_range() call in the reset path then correctly reaches every container's mappings with no dangling pointer risk. The hang manifests as an NMI backtrace on the GPU reset workqueue stuck spinning in rwsem_down_read_slowpath() with a corrupted i_mmap_rwsem: Workqueue: amdgpu-reset-dev xgpu_ai_mailbox_flr_work [amdgpu] Call Trace: <TASK> kvm_wait+0x1f/0x40 __pv_queued_spin_lock_slowpath+0x31d/0x3a0 _raw_spin_lock_irq+0x51/0x80 rwsem_down_read_slowpath+0xb3/0x550 down_read+0x48/0xd0 unmap_mapping_range+0x71/0x140 kfd_dev_unmap_mapping_range+0x5b/0x140 [amdgpu] amdgpu_amdkfd_clear_kfd_mapping+0xd8/0x190 [amdgpu] amdgpu_device_gpu_recover+0x232/0x450 [amdgpu] xgpu_ai_mailbox_flr_work+0xb5/0xc0 [amdgpu] process_one_work+0x18e/0x3e0 worker_thread+0x2e3/0x420 kthread+0x10a/0x230 (cherry picked from commit 1128b4a52de1572e87431de837fd9850cb99542c) | ||||
| CVE-2026-98523 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/client: fix restore of partially initialized client I got a null-ptr-deref report when closing a DRM file descriptor: WARNING: drivers/gpu/drm/drm_atomic.c:2031 at __drm_atomic_helper_set_config+0x18e/0x1b0 [drm] Call Trace: drm_client_modeset_commit_atomic+0x16b/0x220 [drm] drm_client_modeset_commit_locked+0x56/0x160 [drm] drm_client_modeset_commit+0x21/0x40 [drm] __drm_fb_helper_restore_fbdev_mode_unlocked.part.0+0x7b/0x80 drm_fbdev_client_restore+0xe/0x20 [drm_client_lib] drm_client_dev_restore+0x9f/0xc0 [drm] drm_release+0xc5/0xe0 [drm] The warning is followed by a NULL pointer dereference: BUG: kernel NULL pointer dereference, address: 0000000000000008 RIP: __drm_fb_helper_restore_fbdev_mode_unlocked.part.0+0x41/0x80 [drm_kms_helper] Call Trace: drm_fbdev_client_restore+0xe/0x20 [drm_client_lib] drm_client_dev_restore+0x9f/0xc0 [drm] drm_release+0xc5/0xe0 [drm] __fput+0xdc/0x2b0 __x64_sys_close+0x39/0x80 do_syscall_64+0x8d/0x460 entry_SYSCALL_64_after_hwframe+0x76/0x7e drm_client_register() adds the DRM client to the device client list before invoking the initial hotplug callback. If the hotplug callback fails, the client remains registered. For the fbdev client, a failure during drm_fb_helper_initial_config() causes the partially initialized fbdev helper to be cleaned up. drm_fb_helper_fini() releases fb_helper->info and leaves it NULL. The fbdev client therefore remains registered even though there is no fully initialized framebuffer device. Later, when userspace closes the DRM file descriptor, drm_release() can invoke the restore callbacks of registered DRM clients: drm_release() drm_client_dev_restore() drm_fbdev_client_restore() drm_fb_helper_restore_fbdev_mode_unlocked() drm_fbdev_client_restore() currently restores the fbdev state unconditionally. For a partially initialized fbdev client this can submit an incomplete modeset state and subsequently access fbdev state which has not been initialized, resulting in the warning and NULL pointer dereference above. drm_fbdev_client_unregister() already uses fb_helper->info to distinguish a fully probed framebuffer device from a partially initialized client. Use the same condition in drm_fbdev_client_restore() and skip restore if no framebuffer device has been successfully initialized. | ||||
| CVE-2026-98439 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smb/server: cancel async requests when closing connection An async request may still be waiting when a connection is closed. This can stop the connection from closing. Cancel active async requests before waiting for them to finish. | ||||
| CVE-2026-98440 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: nv: Delay freeing of shadow S2 structures until VM destruction We free the shadow S2 structures from kvm_arch_flush_shadow_all(), which is a Bad Idea(tm). Freeing the page tables is fair game (this is what this callback is for), but freeing the container that could still be referenced by another part of the system is not great. Instead, grow separate destructors that gets called when we tear the VM down for good. From there, we can nuke both the individual MMUs as well as the global array that points to them, safe in the knowledge that the vcpus themselves have been destroyed already. | ||||
| CVE-2026-98528 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: gpio: cdev: fix kernel stack leak to user-space in error path If we fail to acquire the GPIO chip guard in gpio_desc_to_lineinfo(), we return immediately before zeroing the info struct we'll end up passing to the user-space later in lineinfo_get_v1(). This may leak the kernel stack contents. Make gpio_desc_to_lineinfo() return int so that the -ENODEV returned on failure to acquire the guard can be propagated to the callers. While not strictly necessary: move the memset() before trying to acquire the SRCU read lock too for good measure. | ||||
| CVE-2026-98529 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: gpio: arizona: Fix runtime PM leak in arizona_gpio_direction_out() Switching a persistent GPIO line from input to output acquires a runtime PM reference on the parent device, but if the subsequent regmap_update_bits() fails the reference is never dropped and no later direction_in() can balance it since the direction was never changed. Drop the reference on the update failure path. | ||||
| CVE-2026-98530 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: kprobes: Fix permanent hang when flushing the kprobe optimizer Writing 0 to /proc/sys/debug/kprobes-optimization while a kprobe is jump-optimized never returns. The writer sleeps in D state forever with kprobe_sysctl_mutex held, so any later read or write of that sysctl hangs as well. For example, with vfs_read+9 as an optimizable address in this build: # cd /sys/kernel/tracing # echo 'p:myprobe vfs_read+9' >> kprobe_events # echo 1 > events/kprobes/myprobe/enable # # wait until /sys/kernel/debug/kprobes/list shows [OPTIMIZED] # echo 0 > /proc/sys/debug/kprobes-optimization INFO: task sh:246 blocked for more than 10 seconds. Call Trace: <TASK> __schedule+0x1176/0x4f70 schedule+0xdc/0x2c0 schedule_timeout+0x17b/0x260 wait_for_completion+0x173/0x3c0 wait_for_kprobe_optimizer_locked+0xbc/0x130 proc_kprobes_optimization_handler+0x156/0x1b0 proc_sys_call_handler+0x324/0x490 vfs_write+0x52d/0xfe0 ksys_write+0xff/0x200 do_syscall_64+0x106/0x630 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> ... INFO: task cat:265 is blocked on a mutex likely owned by task sh:246. wait_for_kprobe_optimizer_locked() reinitializes optimizer_completion, asks the optimizer thread to flush and sleeps in wait_for_completion(). The thread drains the (un)optimizing lists, but calls complete() only if completion_done() is true, i.e. if the completion is already done, which never happens while someone waits. disarm_all_kprobes() and kprobe_trace_self_tests_init() wait the same way. Calling complete() unconditionally would not be enough: the waiter drops kprobe_mutex while it sleeps, and nothing else serializes the sysctl handler against the debugfs "enabled" file. A second flusher that still finds the lists non-empty, e.g. because a disabled probe is queued for unoptimizing, reinitializes the completion under the first: sysctl write debugfs "enabled" write unoptimize_all_kprobes() wait_for_kprobe_optimizer_locked() init_completion(c) mutex_unlock(&kprobe_mutex) wait_for_completion(c) disarm_all_kprobes() wait_for_kprobe_optimizer_locked() init_completion(c) // c->wait is reset, the first // waiter is off the queue mutex_unlock(&kprobe_mutex) wait_for_completion(c) kprobe_optimizer() complete(c) // wakes the debugfs writer only where c is &optimizer_completion. Lining up the two writes during an optimizer pass loses the sysctl writer this way. Replace the completion with a counter of optimizer passes, bumped at the end of each pass and signalled with wake_up_var_locked(), both under kprobe_mutex. A flusher samples the count and waits with wait_var_event_mutex(), which drops kprobe_mutex only while sleeping, so a new count means a whole pass ran in the meantime. Nothing is reinitialized, so several flushers can sleep in the wait at once. | ||||
| CVE-2026-98531 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: sr: enforce exact attribute length for SEG6_ATTR_DST In seg6_genl_policy, SEG6_ATTR_DST is defined with .type = NLA_BINARY and .len = sizeof(struct in6_addr). For NLA_BINARY, .len only enforces the maximum payload length and permits shorter payloads (e.g., 0 bytes). When seg6_genl_set_tunsrc() copies sizeof(struct in6_addr) bytes via kmemdup(val, sizeof(*val), GFP_KERNEL), a short SEG6_ATTR_DST attribute triggers a 16-byte out-of-bounds read past skb->tail into uninitialized skb->head memory, which is stored in sdata->tun_src and leaked back to userspace via SEG6_CMD_GET_TUNSRC. Switch SEG6_ATTR_DST in seg6_genl_policy to NLA_POLICY_EXACT_LEN(sizeof(struct in6_addr)) so that generic netlink validation rejects any attribute whose length is not exactly sizeof(struct in6_addr) with -ERANGE. Tested in QEMU against Linux 7.3.0-rc3 by sending a SEG6_CMD_SET_TUNSRC Generic Netlink message with a 0-byte SEG6_ATTR_DST attribute followed by SEG6_CMD_GET_TUNSRC. On the unfixed kernel, SEG6_CMD_SET_TUNSRC succeeds (err = 0) and SEG6_CMD_GET_TUNSRC leaks 16 bytes of uninitialized kernel heap memory (tun_src = 836a61ecc4d25a1042a8d60411cfb378); with this patch applied, SEG6_CMD_SET_TUNSRC is rejected by netlink policy validation with -ERANGE (-34) and tun_src remains zeroed. | ||||
| CVE-2026-98533 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ipe: protect the dm-verity root hash with RCU ipe_bdev_setintegrity() frees the old root hash when dm-verity publishes a new one on ->preresume, while policy evaluation can still be dereferencing it. Protect the root hash with RCU. The evaluation path already runs under rcu_read_lock(). [FW: remove model name according to latest guideline] | ||||
| CVE-2026-98534 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ipe: fix use-after-free when auditing a newly loaded policy new_policy() audits the policy after ipe_new_policyfs_node() publishes it and drops the new directory's inode lock. A concurrent delete can free the policy while ipe_audit_policy_load() is still using it. Audit the successful load under that lock. [FW: remove model name according to latest guideline] | ||||
| CVE-2026-98537 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: workqueue: Fix NULL current_pwq deref in flush dependency check check_flush_dependency() uses current_wq_worker() to determine whether the caller is a workqueue worker and then dereferences worker->current_pwq to test whether the current workqueue is WQ_MEM_RECLAIM. current_wq_worker() only means that %current has PF_WQ_WORKER set. A kworker can reach check_flush_dependency() while it is not executing a work item. One such path is worker_thread() acting as the pool manager, where create_worker() does GFP_KERNEL allocation and the allocation path invokes the OOM notifier. In that state worker->current_pwq is NULL because current_pwq is set only by process_one_work() and cleared again after the work function returns. [ 416.760634][ T375] Call trace: [ 416.760638][ T375] check_flush_dependency+0x80/0x120 (P) [ 416.760648][ T375] __flush_work+0x98/0x224 [ 416.760657][ T375] flush_work+0x30/0x44 [ 416.760665][ T375] ... [ 416.760710][ T375] blocking_notifier_call_chain+0x58/0xa0 [ 416.760719][ T375] out_of_memory+0xb4/0x458 [ 416.760730][ T375] __alloc_pages_may_oom+0x11c/0x1a8 [ 416.760739][ T375] __alloc_pages_slowpath+0x314/0x46c [ 416.760746][ T375] __alloc_frozen_pages_noprof+0x110/0x1a4 [ 416.760753][ T375] new_slab+0x12c/0x484 [ 416.760759][ T375] ___slab_alloc+0x7a8/0xc7c [ 416.760765][ T375] __slab_alloc+0x74/0xd8 [ 416.760772][ T375] __kmalloc_cache_node_noprof+0x2ac/0x304 [ 416.760779][ T375] alloc_worker+0x28/0x60 [ 416.760785][ T375] create_worker+0x4c/0x20c [ 416.760790][ T375] worker_thread+0xe8/0x2b8 [ 416.760796][ T375] kthread+0x1a8/0x200 [ 416.760805][ T375] ret_from_fork+0x10/0x20 Guard the WQ_MEM_RECLAIM-worker warning with worker->current_pwq. If the kworker is not currently executing a work item, there is no current workqueue to diagnose with that warning. The PF_MEMALLOC warning is left unchanged so explicit reclaim context flushing a !WQ_MEM_RECLAIM target is still reported. | ||||
| CVE-2026-98540 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fprobe: Terminate the fgraph_data list when the reservation is not filled fprobe_fgraph_entry() reserves shadow stack space for every fprobe with an exit handler, but only fills it for those whose entry handler returns 0. fgraph_reserve_data() does not clear the area, so fprobe_return() parses the unused tail as headers left over from an earlier call, and an exit handler can run twice or despite its entry handler asking to skip it. Write a zero word after the last entry to terminate the walk. A zeroed slot does not decode to a NULL fprobe on the arches that encode the header into one unsigned long, since arch_decode_fprobe_header_fp() ORs in FPROBE_HEADER_MSB_PATTERN, so make read_fprobe_header() return NULL for a zeroed slot. | ||||
| CVE-2026-98541 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fou: reject omitted FOU_ATTR_IPPROTO on FOU_ENCAP_DIRECT Commit 7a9bc9e3f423 ("fou: Don't allow 0 for FOU_ATTR_IPPROTO.") added NLA_POLICY_MIN(NLA_U8, 1) to fou_nl_policy[FOU_ATTR_IPPROTO], which rejects an explicitly supplied FOU_ATTR_IPPROTO == 0 attribute with -ERANGE. However, FOU_ATTR_IPPROTO is an optional netlink attribute. When a user sends FOU_CMD_ADD with FOU_ATTR_TYPE set to FOU_ENCAP_DIRECT and omits FOU_ATTR_IPPROTO entirely, nla_policy validation succeeds and parse_nl_config() leaves cfg->protocol as 0 (from memset(cfg, 0, sizeof(*cfg))). fou_create() then creates a FOU_ENCAP_DIRECT socket with fou->protocol == 0. In fou_udp_recv(), returning -fou->protocol to udp_queue_rcv_one_skb() triggers IP protocol resubmission when fou->protocol > 0, whereas returning 0 tells the UDP tunnel layer that the skb was consumed without freeing it. When fou->protocol == 0, every packet received on the socket returns 0 from fou_udp_recv() and leaks the sk_buff. Reject FOU_ENCAP_DIRECT when !cfg->protocol in fou_create() so that creating a direct encapsulation port without FOU_ATTR_IPPROTO fails with -EINVAL while leaving FOU_CMD_DEL and FOU_CMD_GET (which share parse_nl_config()) unaffected. Tested in QEMU against Linux 7.3.0-rc3 by sending a FOU_CMD_ADD Generic Netlink request with FOU_ATTR_PORT = 5555 and FOU_ATTR_TYPE = FOU_ENCAP_DIRECT while omitting FOU_ATTR_IPPROTO. On the unfixed kernel, FOU_CMD_ADD succeeds (err = 0), FOU_CMD_GET reports fou->type = 1 and fou->protocol = 0, and sending 4000 UDP packets to 127.0.0.1:5555 leaks all 4000 sk_buffs (SUnreclaim in /proc/meminfo grows from 41456 kB to 59008 kB, +17552 kB); with this patch applied, FOU_CMD_ADD is rejected with -EINVAL (-22). | ||||
| CVE-2026-98544 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bna: prevent IOC timer rearm during teardown bna: prevent IOC timer rearm during teardown bnad_pci_remove() and the probe disable_ioceth path call timer_delete_sync() for ioc_timer, sem_timer and hb_timer, but not for iocpf_timer. bnad_iocpf_timeout() then takes bnad->bna_lock after free_netdev() has freed the struct bnad. Deleting iocpf_timer last does not fix this. sem_timer and iocpf_timer rearm each other: bnad_iocpf_sem_timeout() can arm iocpf_timer, and bnad_iocpf_timeout() arms sem_timer from bfa_ioc_hw_sem_get() when the semaphore is busy. timer_delete_sync() only waits out its own callback. bnad_ioceth_disable() can time out and leave that callback live. Shut all four IOC timers down with timer_shutdown_sync() on both paths, so a later mod_timer() is ignored. This issue was identified during our ongoing static-analysis research while reviewing kernel code. | ||||
| CVE-2026-98545 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ata: libata-scsi: bound the ATA passthru sense descriptor writes When an ATA PASS-THROUGH command to an ATAPI device fails, the sense buffer holds the device's REQUEST SENSE reply, and ata_scsi_set_passthru_sense_fields() trusts its additional length byte, sb[7], when adding the ATA Status Return descriptor. A faulty or malicious device can use that to make the kernel read and write past the 96-byte buffer in three ways: - scsi_sense_desc_find() is passed sb[7] + 8 as the buffer length, so its clamp against sb[7] does nothing and the walk runs off the end. - A type-9 descriptor found near the end is filled in unchecked. - A new descriptor at sb[8 + len] needs len + 22 bytes, not len + 14, so len 75..82 writes up to 8 bytes past the end. Reproduced with KASAN under qemu, with the emulated ATAPI REQUEST SENSE reply patched: BUG: KASAN: slab-out-of-bounds in scsi_sense_desc_find+0x1a5/0x210 BUG: KASAN: slab-out-of-bounds in ata_scsi_qc_complete+0x1a15/0x1a50 Both are gone with this patch, and a valid descriptor is still filled in. | ||||
| CVE-2026-85327 | 1 Microsoft | 28 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 25 more | 2026-10-18 | 7.8 High |
| Heap-based buffer overflow in Windows Print Spooler Components allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-95641 | 1 Adobe | 1 Photoshop | 2026-10-18 | 7.8 High |
| Photoshop Desktop is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. | ||||