Export limit exceeded: 16814 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (16814 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-110756 | 2026-10-16 | 5.3 Medium | ||
| Text::CSV_XS versions before 1.65 for Perl drop the end of a record and its line ending when a UTF-8 flagged field precedes invalid UTF-8 bytes in print. When a record contains a UTF-8 flagged field, print holds back trailing bytes that are not valid UTF-8 at each buffer flush, so that a character split across two flushes can be completed. Nothing writes the held-back bytes after the record's final flush. A record whose last field ends in such a byte loses it, any closing quote and the line ending, while print still returns true. combine is not affected. The next record is written onto the same line, or, when the last field was quoted, the missing closing quote makes a reader take every following record as part of that field. | ||||
| CVE-2026-110757 | 2026-10-16 | 5.3 Medium | ||
| Text::CSV_XS versions before 1.65 for Perl allow record splitting by writing strings used as numbers without quotes in combine. combine and print do not check whether a field needs quotes when its value has Perl's integer or numeric flag set. Perl sets these flags on a string used in a numeric operation when it parses as a number, which allows leading and trailing whitespace. With binary set, as csv does by default, "12\n" passes a check such as $qty > 0 and is then written unquoted with its newline. A value validated as a number can end the record early and turn the fields after it into a separate row. | ||||
| CVE-2026-89671 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: gate nfs3 setacl by argp->mask nfsd3_proc_setacl() calls set_posix_acl() unconditionally for both ACL_TYPE_ACCESS and ACL_TYPE_DEFAULT, passing argp->acl_access and argp->acl_default verbatim. The NFSv3 ACL decoder only populates those pointers when the corresponding mask bit is set: nfs3svc_decode_setaclargs() if (args->mask & NFS_ACL) decode into acl_access if (args->mask & NFS_DFACL) decode into acl_default /* otherwise the pointer stays NULL (pc_argzero) */ nfsd3_proc_setacl() set_posix_acl(.., ACL_TYPE_ACCESS, argp->acl_access) set_posix_acl(.., ACL_TYPE_DEFAULT, argp->acl_default) set_posix_acl(idmap, dentry, type, NULL) is the VFS "remove this ACL type" operation. A NULL pointer that means "the client did not send this arm" is therefore indistinguishable from "the client asked to remove this ACL". A SETACL with mask=NFS_ACL silently drops the directory's default ACL; mask=0 drops both. The sibling nfsd3_proc_getacl() already consults argp->mask before touching each arm; mirror that in setacl. Fix by wrapping each set_posix_acl() call in the matching mask bit check and initializing error to 0 before inode_lock so that a request with neither bit set leaves the on-disk ACLs untouched and returns nfs_ok. The out_drop_lock path and the unconditional posix_acl_release() at out: are preserved; both NULL-tolerate the skipped arms. | ||||
| CVE-2026-80731 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: remove CAP_SYS_RAWIO zero-padding in dev_validate_header dev_validate_header() reads dev->hard_header_len directly when zero-padding short link layer headers for CAP_SYS_RAWIO holders: if (capable(CAP_SYS_RAWIO)) { memset(ll_header + len, 0, dev->hard_header_len - len); return true; } Packet send paths call dev_validate_header() on skbs whose headroom was allocated from an earlier hard_header_len read. If the device is reconfigured so that dev->hard_header_len increases before validation, the memset writes past the reserved buffer, an out-of-bounds write. This out-of-bounds write is masked in some SOCK_RAW paths today because the same concurrent increase can first make skb_push() exceed the reserved headroom and trigger skb_under_panic(). Remove the zero-padding branch before making those hard_header_len reads consistent, so the snapshot fixes do not turn a loud panic into a silent overwrite. This path is only reached for variable length L2 protocols, where len < hard_header_len but len >= min_header_len. No remaining in-tree variable length L2 protocol implements header_ops->validate, and the CAP_SYS_RAWIO bypass that zero-pads and accepts short headers has no real value beyond allowing testing of intentionally malformed input. Drop the CAP_SYS_RAWIO branch. The remaining reads of dev->hard_header_len in dev_validate_header() are comparisons only and have no memory safety impact. | ||||
| CVE-2026-80722 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: validate individual TWT params before driver setup ieee80211_process_rx_twt_action() only partially validates a received S1G TWT setup frame before queueing it. An individual agreement can therefore reach ieee80211_s1g_rx_twt_setup() with twt->length too short for the full struct ieee80211_twt_params. The individual path passes twt to drv_add_twt_setup(). Both the tracepoint and the driver callback consume the complete parameters block, not merely req_type. Do not pass a short individual agreement to the driver. Broadcast agreements remain unchanged because they are rejected locally after accessing only req_type. [edit commit message to not overclaim lack of validation nor understate driver impact] | ||||
| CVE-2026-80702 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: fix guest_memory_dirty bitfield clobbered as size Two sites in vmwgfx_resource.c assign boolean literals to res->guest_memory_size, which is an unsigned long allocation-size field; the intended target is the adjacent res->guest_memory_dirty bitfield. After the assignments the field holds 0 or 1 instead of the resource's MOB allocation size: - vmw_resource_release() writes 0 (false), and - vmw_resource_unbind_list() writes 1 (true). Subsequent revalidation paths read guest_memory_size when computing the dirty page range (vmw_bo_dirty_transfer_to_res()) and the buffer allocation size (vmw_resource_buf_alloc()), producing zero-length walks or wrap-around ranges that read or write past the MOB bitmap. The dirty-tracking intent of the original code (mark the resource as dirtied since the last sync) is also lost, since guest_memory_dirty is never updated. Rename both assignments to guest_memory_dirty. | ||||
| CVE-2026-80580 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: bound mode sysfs output to the sysfs buffer mode_string() uses snprintf() which can return a value larger than the remaining buffer space. show_modes() accumulates the return value into i without checking whether i has reached PAGE_SIZE, causing the offset to advance past the sysfs buffer if the modelist is long enough. Add a size parameter to mode_string() and use scnprintf() to return only the bytes actually written. Add an early return when offset already exceeds the buffer. In show_modes(), stop accumulating once the buffer is full. | ||||
| CVE-2026-74724 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ipvs: avoid out-of-bounds write in ip_vs_nat_icmp Sashiko warns that local attacker can modify the packet while it is processed by IPVS. Some places read the IP ihl field multiple times which can cause out-of-bounds access. One such place is ip_vs_nat_icmp where we can write after the validated area. Fix it by providing ciph argument just like it is done for IPv6 and use ciph->len as offset to the embedded transport header. Modify some IPv4 header checks by reading the ihl field only once. | ||||
| CVE-2026-74469 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: sctp: prevent peer transport count overflow sctp_assoc_add_peer() increments the association's 16-bit transport_count for every new unique peer. Adding the 65,536th transport wraps the count to zero. SCTP sock_diag uses transport_count to reserve the INET_DIAG_PEERS payload, then copies one sockaddr_storage for every entry in transport_addr_list. After the wrap, a diagnostic dump reserves an empty payload and writes 8 MiB of peer addresses past the skb tail. Reject a new unique peer when transport_count has reached U16_MAX. Perform the check after the existing-peer lookup so a duplicate address continues to return its existing transport at the limit. | ||||
| CVE-2026-74408 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k: fix OOB access from firmware tx status queue ID ath_tx_edma_tasklet() accesses sc->tx.txq[ts.qid] where ts.qid is a 4-bit hardware field (0-15), but the txq array only has ATH9K_NUM_TX_QUEUES (10) entries. A qid >= 10 causes an OOB array access. Add a bounds check on ts.qid before using it as an array index. | ||||
| CVE-2026-74404 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - Fix snp_filter_reserved_mem_regions() off-by-one Sashiko notes: > regarding the bounds check in snp_filter_reserved_mem_regions() > called via walk_iomem_res_desc(): does the check > if ((range_list->num_elements * 16 + 8) > PAGE_SIZE) > allow an off-by-one heap buffer overflow? > > If range_list->num_elements is 255, 255 * 16 + 8 = 4088, which is <= 4096. > Writing range->base (8 bytes) fills 4088-4095, but writing range->page_count > (4 bytes) would write to 4096-4099, overflowing the kzalloc-allocated > PAGE_SIZE buffer. Fix this by accounting for the entry about to be written to, in addition to the entries that are already allocated. | ||||
| CVE-2026-79607 | 1 Xen | 1 Xen | 2026-10-16 | 5.5 Medium |
| During Xenstore live update the state record for a Xenstore watch with specified watch depth is written with two bytes missing. This results in an inconsistent state when reading the state back in the new Xenstore, causing a crash of Xenstore or wrong Xenstore data. | ||||
| CVE-2026-109716 | 1 Mozilla | 2 Firefox, Thunderbird | 2026-10-16 | 8.1 High |
| Incorrect boundary conditions in the JavaScript Engine component. This vulnerability was fixed in Firefox 158, Firefox ESR 115.43, Firefox ESR 153.5, Thunderbird 158, and Thunderbird 153.5. | ||||
| CVE-2026-109715 | 1 Mozilla | 1 Firefox | 2026-10-16 | 8.1 High |
| Incorrect boundary conditions in the JavaScript Engine component. This vulnerability was fixed in Firefox 158, Firefox ESR 115.43, Firefox ESR 153.5, Thunderbird 158, and Thunderbird 153.5. | ||||
| CVE-2026-63442 | 2026-10-16 | 8.1 High | ||
| OPNsense is a FreeBSD based firewall and routing platform. Prior to version 26.1.11, the unauthenticated WebGUI login usernamefld accepts carriage-return and line-feed characters that survive LOG_AUTH processing through syslog-ng-lockout.conf into the syslog-ng program destination feeding lockout_handler. The consumer's readline() processing treats an injected fragment as a separate authentication event and selects the first syntactically valid IP address from the forged line. An attacker with network access to the login page can forge failure events for another IP, causing that IP to be added to the sshlockout PF table and its active states to be killed, or forge accepted events that reset an attacker's own brute-force counter. This can block administrative, DNS, gateway, or monitoring addresses and can bypass password-guessing lockout without authentication. This issue is fixed in version 26.1.11. | ||||
| CVE-2026-110917 | 2026-10-16 | 4.3 Medium | ||
| Memory corruption in SVG in Google Chrome prior to 155.0.8059.84 allowed a remote attacker to read memory via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-72029 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: wwan: iosm: bound device offsets in the MUX downlink decoder mux_dl_adb_decode() walks a chain of aggregated datagram tables using offsets and lengths taken from the modem. first_table_index, next_table_index, table_length, datagram_index and datagram_length are all device supplied le values. Only first_table_index was checked, and only for being non zero. The decoder then formed adth = block + adth_index and read the table header and the datagram entries with no bound against the received skb. A modem that reports an index or a length past the downlink buffer makes the decoder read out of bounds. The buffer is IPC_MEM_MAX_DL_MUX_LITE_BUF_SIZE and skb->len is at most that, so skb->len is the real limit, but none of these in band offsets were checked against it. The table chain is also followed with no forward progress check. The loop takes the next table from adth->next_table_index and stops only when that reaches zero. A modem can stage two tables that point at each other, so the loop never ends. It runs in softirq and clones the skb on every pass. Validate every device offset and length against skb->len before use. The block header must fit. Each table header, on entry and after every next_table_index, must lie inside the skb. The datagram table must fit. Each datagram index and length must stay inside the skb. The header padding must not exceed the datagram length so the receive length does not wrap. Require each next_table_index to move forward so the chain cannot cycle. This was reproduced under KASAN as a slab out of bounds read on a normal downlink receive once the iosm net device is up. | ||||
| CVE-2026-64385 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix double-free in SMB2_ioctl() replay A response-bearing attempt can return a replayable error and free its response buffer. If SMB2_ioctl_init() fails before the next send, cleanup retains the previous buffer type and frees that response again. Reset response bookkeeping before each attempt to prevent the stale free. | ||||
| CVE-2026-64235 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: x86/ftrace: Relocate %rip-relative percpu refs in dynamic trampolines With CONFIG_CALL_DEPTH_TRACKING enabled on an x86 retbleed-affected platform (eg: Skylake), with retbleed=stuff, registering a dynamic ftrace trampoline crashes on the first call into the traced function: BUG: unable to handle page fault for address: ffff88817ae18880 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 4b53067 P4D 4b53067 PUD 0 Oops: Oops: 0002 [#1] SMP PTI CPU: 3 UID: 0 PID: 187 Comm: usleep Not tainted 7.0.10 #243 PREEMPT(full) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014 Code: 24 78 00 00 00 00 48 89 ea 48 89 54 24 20 48 8b b4 24 b8 00 00 00 48 8b bc 24 b0 00 00 00 48 89 bc 24 80 00 00 00 48 83 ef 05 <65> 48 c1 3d 1f a8 b6 02 05 48 8b 15 f6 00 00 00 4c 89 3c 24 4c 89 Call Trace: <TASK> ? find_held_lock ? exc_page_fault ? lock_release ? __x64_sys_clock_nanosleep ? lockdep_hardirqs_on_prepare ? trace_hardirqs_on __x64_sys_clock_nanosleep do_syscall_64 ? exc_page_fault ? call_depth_return_thunk entry_SYSCALL_64_after_hwframe ... Kernel panic - not syncing: Fatal exception This small reproducer allows to easily trigger the crash: # echo 'p __x64_sys_clock_nanosleep' > /sys/kernel/tracing/kprobe_events # echo 1 > /sys/kernel/tracing/events/kprobes/p___x64_sys_clock_nanosleep_0/enable # usleep 1 Monitoring the crash under GDB points to the exact instruction in charge of incrementing the call depth: sarq $5, %gs:__x86_call_depth(%rip) This instruction matches the one inserted by the ftrace_regs_caller from ftrace_64.S. This emitted code was likely working fine until the introduction of 59bec00ace28 ("x86/percpu: Introduce %rip-relative addressing to PER_CPU_VAR()"): it has made the call depth accounting addressing relative to $rip, instead of being based on an absolute address. As this code exact location depends on where the trampoline lives in memory, the corresponding displacement needs to be adjusted at runtime to actually correctly find the per-cpu __x86_call_depth value, otherwise the targeted address is wrong, leading to the page fault seen above. Fix the %rip-relative displacement of the copied CALL_DEPTH_ACCOUNT instruction (from ftrace_regs_caller) by calling text_poke_apply_relocation(), as it is done for example by the x86 BPF JIT compiler through x86_call_depth_emit_accounting(). This corrects both CALL_DEPTH_ACCOUNT slots, in ftrace_caller and ftrace_regs_caller. [ bp: Massage. ] | ||||
| CVE-2026-21116 | 1 Samsung Mobile | 1 Samsung Mobile Devices | 2026-10-16 | N/A |
| Out-of-bounds write in libsmkvextractor.so prior to SMR Oct-2026 Release 1 allows local attackers to write out-of-bounds memory. | ||||