Export limit exceeded: 25279 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25279 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98388 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: exec: do_close_on_exec() before taking exec_update_lock do_close_on_exec() currently happens while holding the exec_update_lock, which is used in a lot of places that access process state to synchronize access checks. I recently added another such use of exec_update_lock, causing a regression. do_close_on_exec() can block waiting for a reply from a filesystem. That means a hung filesystem can block codepaths that use exec_update_lock; and it also means that a FUSE filesystem which attempts to inspect the calling process can deadlock. To avoid such problems, move do_close_on_exec() before the exec_update_lock is taken, but after the FD table has been copied if necessary. I have looked through all the calls between the old and new position of the do_close_on_exec() call; there seems to be no file descriptor table access in between. | ||||
| CVE-2026-98415 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: soc: samsung: exynos-pmu: fix use-after-free of interrupt generator node The setup_cpuhp_and_cpuidle() parses the device tree node for the interrupt generation block via of_parse_phandle() and decrements its reference count using of_node_put() immediately after fetching the resource address. However, later the intr_gen_node pointer is passed into of_syscon_register_regmap(). Fix this by declaring intr_gen_node with __free() and removing of_node_put(). | ||||
| CVE-2026-98392 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel_pcie: fix tx_handle bounds off-by-one Valid indices into txq->urbd0s/tfds/bufs are 0..txq->count-1, so tfd_index == txq->count is already out of range. Change the guard in btintel_pcie_msix_tx_handle() from '> txq->count' to '>= txq->count'. This issue was reported by Claude Mythos. | ||||
| CVE-2026-98393 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: ipv4: Fix UDP length overflow with PMTU discover and big MTU This commit bounds cork->base.fragsize to IP_MAX_MTU to avoid a possible overflow of UDP length that triggers a WARN in udp_set_len_short when setsockopt IP_MTU_DISCOVER is set to IP_PMTUDISC_PROBE, and a large packet is sent over a netdev with an unusually large MTU. Steps to reproduce: 1. Set device MTU bigger than IP_MAX_MTU + 20. cork->base.fragsize will be set to that MTU in ip_setup_cork. 2. Set IP_MTU_DISCOVER to IP_PMTUDISC_PROBE. It lets maxnonfragsize be set to device MTU (cork->fragsize) in __ip_append_data, rather than to IP_MAX_MTU. 3. Send 65528 bytes of payload (+8 bytes of UDP header, +20 bytes of IPv4 header). Device MTU allows it (it's only one byte bigger than IP_MAX_MTU + IPv4 header, and the device MTU is bigger than that). 4. The UDP length in the built packet is 65536, which overflows the 16-bit length field and triggers the WARN in udp_set_len_short. Note: IP_PMTUDISC_DO with IPv4 is safe, because ip_dst_mtu_maybe_forward always clamps at IP_MAX_MTU, unlike ip6_dst_mtu_maybe_forward. The Fixes tag points at the first commit where I could reproduce the overflow with IPv4 and IP_PMTUDISC_PROBE. | ||||
| CVE-2026-98394 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: af_unix: Return immediately when manage_oob() returns NULL for 0-length buffer. Fahad Alharbi reported that recv(0, MSG_PEEK) triggers busy-wait in unix_stream_read_generic() if recv() is blocking and the last skb in the queue is MSG_OOB skb. In such a situation, TCP returns 0 immediately regardless of blocking or non-blocking. Let's follow the behaviour. | ||||
| CVE-2026-98398 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: locking/lockdep: Invalidate stale class_cache entries for zapped classes syzbot reported a lockdep splat hitting DEBUG_LOCKS_WARN_ON(1) in hlock_class() due to an invalid class_idx: WARNING: kernel/locking/lockdep.c:238 at __lock_acquire+0x382/0x2cf0 kernel/locking/lockdep.c:5203 Workqueue: wg-crypt-wg0 wg_packet_tx_worker RIP: 0010:hlock_class kernel/locking/lockdep.c:238 [inline] RIP: 0010:check_wait_context kernel/locking/lockdep.c:4870 [inline] RIP: 0010:__lock_acquire+0x389/0x2cf0 kernel/locking/lockdep.c:5203 Call Trace: <IRQ> lock_acquire+0x106/0x350 kernel/locking/lockdep.c:5886 _raw_spin_lock+0x2e/0x40 kernel/locking/spinlock.c:173 tcp_tsq_handler+0x29/0x200 net/ipv4/tcp_output.c:1291 tcp_tsq_workfn+0x384/0x410 net/ipv4/tcp_output.c:1325 ... When a lock class is zapped (e.g. during module unload or key unregistration), zap_class() clears the class's bit in lock_classes_in_use and removes it from the class hash table. However, existing lockdep_map instances embedded in data structures may still retain a pointer to the zapped class in their class_cache[] array. When __lock_acquire() subsequently runs on such a lock, it finds lock->class_cache[subclass] != NULL, skipping register_lock_class() and assigning hlock->class_idx to the index of the zapped class. When check_wait_context() or hlock_class() inspects the held_lock, it finds !test_bit(class_idx, lock_classes_in_use) and warns. Furthermore, if the zapped slot is subsequently re-allocated to an unrelated lock key, the stale class_cache entry would erroneously match the unrelated class (ABA issue). Add lock_class_cache_is_valid() to validate that the cached class is within lock_classes bounds, still allocated in lock_classes_in_use (using uninstrumented arch_test_bit() in __always_inline context so it is safe in noinstr contexts like match_held_lock()), and that class->key matches the expected subkey (taking lockdep_set_subclass() overrides into account). Also use READ_ONCE()/WRITE_ONCE() when accessing class_cache[]. If the entry is invalid or stale, fall back to register_lock_class() / look_up_lock_class(). | ||||
| CVE-2026-98420 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: follow SMB2 session expiration semantics ksmbd_session_register() destroys valid sessions after ten seconds of inactivity whenever a client starts another SessionSetup exchange. This confuses Session.IdleTime with Session.ExpirationTime. Windows can create additional authenticated sessions on an existing connection, so deleting the older session invalidates its tree connects and makes mapped drives fail with STATUS_NETWORK_NAME_DELETED. The session expiration rules require the server to change a valid session to expired only after its credential expiration time passes. A valid or expired session otherwise keeps its connection from being scavenged. Connections that have not negotiated a dialect, have no sessions, or have only InProgress sessions are disconnected after an implementation-specific timeout. Use the Windows-compatible 45 second value and run the expiration check periodically for both TCP and SMB Direct. Keep zero as an infinite credential expiration time, and count each Valid-to-Expired transition. Set expired sessions to InProgress when they reauthenticate. If authentication fails, remove the session from the global and per-connection tables immediately, including SMB3 multichannel connections. Retain protection against abandoned SessionId-zero exchanges by allowing only one InProgress authentication per connection. Additional exchanges fail with STATUS_INSUFFICIENT_RESOURCES, and stale InProgress sessions are reaped after the same 45 second setup timeout. This bounds the original unauthenticated memory-exhaustion path without evicting established sessions. | ||||
| CVE-2026-98425 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: don't warn when an IBSS has no channel to scan ieee80211_request_ibss_scan() warns when regulatory leaves no allowed channel, but that can happen as the regdomain can change while IBSS is operating, and it can continue to operate briefly during the 60s grace period until it's shut down. Just remove the warning in this case. | ||||
| CVE-2026-99999 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ipv4: validate checksum_start before completing checksum If a packet with bad checksum metadata gets into the ipv4 stack, skb_checksum_help can corrupt the network header and cause a bunch of mischief. This was discovered and reported by Paulos, and has been reporoduced by others independently since. We really shouldn't allow such packets in, but as a defence in depth measure, let's also check before we complete the checksum. A more complete validation at input is forthcoming, but needs more work. | ||||
| CVE-2026-98387 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/crypto: Fix skcipher_walk return code handling in aes_s390 The return codes from skcipher_walk_virt() were not properly checked before entering the processing loops in ecb_aes_crypt() and ctr_aes_crypt(). If skcipher_walk_virt() fails, the walk structure may be in an undefined state, and attempting to process data could lead to incorrect behavior or accessing uninitialized memory. Add proper return code checking to ensure correct handling of the walk initialization and walk advance and eventually return to the caller with that return code. | ||||
| CVE-2026-98389 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: skip gfx switch_power_profile during GPU reset During resume from GPU reset, the gfx idle work may invoke switch_power_profile before the reset completes. This causes the following assert error because the register access occurs without first releasing the GPU reset semaphore: [ 1576.768935] CR2: 0000559ea133ead0 CR3: 00000002e6c42000 CR4: 0000000000350ef0 [ 1576.768940] Call Trace: [ 1576.768944] <TASK> [ 1576.768953] amdgpu_device_rreg+0x21/0x50 [amdgpu] [ 1576.769158] smu_msg_v1_send_msg+0x1a4/0x6e0 [amdgpu] [ 1576.769437] smu_cmn_send_smc_msg_with_params_ext+0xba/0x120 [amdgpu] [ 1576.769721] smu_cmn_send_smc_msg_with_param+0x33/0x40 [amdgpu] [ 1576.769993] smu_v13_0_0_set_power_profile_mode+0x192/0x2b0 [amdgpu] [ 1576.770267] smu_bump_power_profile_mode+0x5d/0x80 [amdgpu] [ 1576.770538] smu_switch_power_profile+0xa4/0xf0 [amdgpu] [ 1576.770839] amdgpu_dpm_switch_power_profile+0x6f/0x90 [amdgpu] [ 1576.771210] amdgpu_gfx_profile_idle_work_handler+0xe9/0x130 [amdgpu] [ 1576.771460] process_one_work+0x23e/0x6f0 [ 1576.771491] worker_thread+0x1c4/0x380 [ 1576.771506] kthread+0x10c/0x150 [ 1576.771512] ? __pfx_worker_thread+0x10/0x10 [ 1576.771518] ? __pfx_kthread+0x10/0x10 [ 1576.771530] ret_from_fork+0x314/0x390 [ 1576.771537] ? __pfx_kthread+0x10/0x10 [ 1576.771546] ret_from_fork_asm+0x1a/0x30 (cherry picked from commit d93b1ff538ce9750c01e0dd0aa62575579c0fc08) | ||||
| CVE-2026-98390 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86/amd_node: Avoid divide by zero on virtualized systems On a virtualized system, the number of nodes does not have a relationship to the number of roots. A Xen PVH dom0 can calculate roots_per_node as 0, which crashes with a divide by zero in: if (count++ % roots_per_node) because the underlying topology code on Xen ends up making num_nodes 2 and num_roots 1 and the integer division result is 0. The issue is seen with Xen, but it could affect other systems. Set roots_per_node to 1 in this case. Print a firmware bug when this is performed for non-virtualized systems. [ bp: Massage commit message. ] | ||||
| CVE-2026-98391 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe: Guard page-fault worker with runtime PM check During VM teardown, the VM's runtime PM reference is dropped asynchronously, allowing the device to autosuspend while stale page faults belonging to the now-dead VM are still queued. When the page-fault worker later tries to ack one of these, it calls into guc_ct_send_locked() on an already-suspended device, tripping: Assertion `!xe_pm_runtime_suspended(xe)` failed! WARNING at xe_device.c:1267 xe_device_assert_mem_access+0x11c/0x140 [xe] A live VM/exec queue always holds a PM reference while it has outstanding work, so if the device is suspended at ack time, the owning context is already gone and the fault is stale. Take a runtime PM reference across the entire pagefault queue worker to safely deliver acks for torn-down VMs. v3: - Move PM ref to the generic xe_pagefault_queue_work using guard(xe_pm_runtime)(xe) instead of tracking it in the GuC backend(Matt Brost). v2: - Hold PM ref across the entire batch (begin/end) instead of per-ack. This prevents the device from autosuspending mid-batch, which would leave write_only acks written but the end flush skipped, and skip counter++, desyncing the cadence check.(Himal) - Add a comment explaining stale faults.(Himal) (cherry picked from commit fcc2431d2213dc4d04250c4f1ae87d9c3ae0d455) [Rodrigo: Added xe_device struct for compatibility while cherry-picking] | ||||
| CVE-2026-98395 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/entry: Fix irq_soft_mask corruption on replayed interrupt exit When __replay_soft_interrupts() replays a pending interrupt (e.g. PACA_IRQ_DEC -> timer_interrupt), it calls the handler directly with a synthetic pt_regs. The DEFINE_INTERRUPT_HANDLER_ASYNC wrapper around each handler calls arch_interrupt_async_exit_prepare() on the way out, which calls arch_interrupt_exit_prepare() -> local_irq_disable() -> arch_local_irq_disable(), which does: irq_soft_mask_set(IRQS_DISABLED) /* 0x1 */ This unconditionally overwrites irq_soft_mask with IRQS_DISABLED (0x1), stripping the IRQS_PMI_DISABLED (0x2) bit. The result is that irq_soft_mask is 0x1 instead of IRQS_ALL_DISABLED (0x3) when the handler returns to __replay_soft_interrupts(). For a normally-taken interrupt this is harmless: the next interrupt always enters through arch_interrupt_enter_prepare() which unconditionally sets irq_soft_mask to IRQS_ALL_DISABLED. But during replay, next_interrupt() is called directly between replayed handlers without going back through arch_interrupt_enter_prepare(), so the stripped bit is never restored. next_interrupt() then fires a WARNING: WARNING: arch/powerpc/kernel/irq_64.c:75 WARN_ON(irq_soft_mask_return() != IRQS_ALL_DISABLED) The warning was observed early in boot on a POWER10 pseries guest during kmem_cache_init_late(), where a spinlock release triggers interrupt replay that processes a pending timer interrupt. Debugger state confirming the bug: Before timer_interrupt(®s): irq_soft_mask = 0x3 (IRQS_ALL_DISABLED) correct irq_happened = 0x41 (HARD_DIS|REPLAYING) correct After timer_interrupt(®s) returns: irq_soft_mask = 0x1 (IRQS_DISABLED) WRONG - PMI bit stripped irq_happened = 0x41 unchanged The fix is to replace local_irq_disable() with hard_irq_disable(). hard_irq_disable() is the right primitive here for two reasons: 1. On PPC64 (hw_irq.h:301) it calls irq_soft_mask_set_return(IRQS_ALL_DISABLED), setting the soft mask to 0x3 (both IRQS_DISABLED and IRQS_PMI_DISABLED), which preserves the PMI bit and fixes the WARNING. The additional work it does (__hard_irq_disable(), PACA_IRQ_HARD_DIS |=) is redundant but safe since both are already set at this point in the exit path; the trace_hardirqs_off() inside is guarded by if (!arch_irqs_disabled_flags(flags)) so it will not double-fire. 2. On PPC32 (hw_irq.h:467) hard_irq_disable() maps to arch_local_irq_disable() -> __hard_irq_disable(), which clears MSR[EE] in hardware. This is exactly correct: PPC32 has no soft-mask PACA mechanism, so the hardware disable is the right way to satisfy irqentry_exit()'s requirement. This also fixes a build error on PPC32 where irq_soft_mask_set() is only defined under CONFIG_PPC64: arch/powerpc/include/asm/entry-common.h:273: error: implicit declaration of function 'irq_soft_mask_set' Using hard_irq_disable() requires no #ifdef and is consistent with how the rest of the entry code (e.g. entry-common.h:463) handles the same PPC32/PPC64 split. | ||||
| CVE-2026-98396 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: powerpc: Do not restore KUAP in arch_exit_to_user_mode_prepare() KUAP means kernel cannot touch user memory unless it explicitly is enabled. In the kernel it should stay AMR_KUAP_BLOCKED. While returning to userspace just before RFI, kernel should restore the user AMR value back. Looks like GENERIC_ENTRY might be treating arch_exit_to_user_mode_prepare() as the last architecture step before returning to userspace. commit bee25f97ad24 ("powerpc: Enable GENERIC_ENTRY feature") therefore called kuap_user_restore() from that hook. But on PowerPC that is too early. After irqentry_exit() / syscall_exit_to_user_mode() we still run platform specific exit routines. e.g. code snippets showing both exception handling and system call handling as the callers of function arch_exit_to_user_mode_prepare() which does kuap_user_restore(). The below path shows that calling kuap_user_restore() is too early when called from arch_exit_to_user_mode_prepare(). Exception handling in exceptions-64s.S ======================================= bl CFUNC(do_page_fault) ..DEFINE_INTERRUPT_HANDLER_ASYNC(do_page_fault) arch_interrupt_async_enter_prepare(regs); state = irqentry_enter(regs); instrumentation_begin(); irq_enter_rcu(); handler(regs); nap_adjust_return(regs); irq_exit_rcu(); instrumentation_end(); arch_interrupt_async_exit_prepare(regs); irqentry_exit(regs, state); <<< too early irqentry_exit_to_user_mode() __exit_to_user_mode_prepare(regs, EXIT_TO_USER_MODE_WORK_IRQ); arch_exit_to_user_mode_prepare(regs, ti_work); <<< too early b interrupt_return_srr .. bl CFUNC(interrupt_exit_user_prepare) <<< already calls kuap_user_restore prep_irq_for_enabled_exit() retry can run kernel code with IRQs on. So only when that routine is fully finished is when the user KUAP should be fully restored which interrupt_exit_user_prepare() already takes care of before returning. Similarly for system call handling in interrupt_64.S ====================================================== bl CFUNC(system_call_exception) .Lsyscall_exit: addi r4,r1,STACK_INT_FRAME_REGS li r5,0 /* !scv */ bl CFUNC(syscall_exit_prepare) .. kuap_assert_locked(); syscall_exit_to_user_mode(regs); <<< too early syscall_exit_to_user_mode_prepare(regs); <<< too early kuap_user_restore(regs); <<< already calls syscall_exit_prepare(), which can enable IRQs, replay a pending interrupt, and only then rfi. Those functions already restore KUAP immediately before rfi. Note that if we restore the user AMR too early like in the current code as shown from the code snippets above, then we get the following warning when CONFIG_PPC_KUAP_DEBUG is enabled: WARNING: arch/powerpc/include/asm/book3s/64/kup.h:293 at interrupt_exit_user_prepare+0x1a0/0x1c0 Hardware name: IBM pSeries (emulated by qemu) POWER10 (architected) TRAP: 0700 LR: c00000000000d8d4 CTR: c0000000021fe500 MSR: <SF,EE,ME,IR,DR,RI,LE> CR: 44000804 XER: 20040000 interrupt_exit_user_prepare+0x1a0/0x1c0 interrupt_return_srr_user+0x8/0x12c | ||||
| CVE-2026-98403 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: s390/boot: Avoid IPL parameter append past command line A command line may occupy all but the terminating byte of COMMAND_LINE_SIZE. In that case append_ipl_block_parm() passes a zero size to the IPL parameter conversion helpers and points the destination one byte past early_command_line. The helpers subtract one from the unsigned size and write the converted parameter outside the command line buffer. Convert the IPL parameter in the command line parsing buffer first. A parameter beginning with '=' can then replace the existing command line regardless of its length, while other parameters are appended only when space remains. | ||||
| CVE-2026-98412 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: power: sequencing: fix NULL-pointer dereference in pwrseq_unit_new() If memory allocation fails in pwrseq_unit_setup_deps(), pwrseq_unit_put() is called to release the partially initialized unit. However, we've never initialized unit->list and pwrseq_unit_release() will unconditionally call list_del() on it. Initialize unit->list right after allocating the unit struct. | ||||
| CVE-2026-98413 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: selinux: always fill AVC decision in avc_has_perm_noaudit() avc_has_perm_noaudit() is documented to return a copy of the access decision in @avd, but its early return for an empty requested permission set leaves the buffer untouched. All callers pass an uninitialized stack variable and afterwards feed it to avc_audit(), and the inode hook even stores it in the per-task decision cache. Fill in a deny-all, audit-all decision, similar to avd_init(), so every caller receives a defined value at no cost on the hot path. | ||||
| CVE-2026-98417 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: xfrm: reject unrepresentable espintcp transport headers ESP-in-TCP can hand xfrm packets whose transport header offset no longer fits after the stream parser trims the TCP envelope. The plain transport header reset truncates that offset and triggers the skb warning path. Use the careful transport-header helper and drop the skb through the existing XFRM error path when the offset cannot be represented. | ||||
| CVE-2026-98418 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: sched/core: Avoid false migration warning for proxy donors Proxy execution can move a blocked donor's scheduling context to the lock owner's CPU even when the donor is migration-disabled. The donor does not execute there, and its original execution CPU remains recorded in wake_cpu. set_task_cpu() warns unconditionally for migration-disabled tasks, so a subsequent proxy migration or the wakeup path returning the donor home triggers a false positive: moving a blocked scheduling context does not violate the migration-disabled execution context. For example, creating a mutex owner on CPU1 and a migration-disabled waiter on CPU0 can trigger the following warning: proxy_migrate_repro: donor blocking on CPU0 with migration disabled proxy_migrate_repro: donor moved from CPU0 to CPU1 WARNING: kernel/sched/core.c:3389 at set_task_cpu+0x1d3/0x280 ... Call Trace: try_to_wake_up+0x43f/0x780 __mutex_unlock_slowpath+0x330/0x540 owner_fn+0x9f/0xc0 [proxy_migrate_repro] ... proxy_migrate_repro: donor woke on CPU0, task_cpu=0 proxy_migrate_repro: completed Exclude blocked proxy donors from the warning. The proxy wakeup path restores an executable placement before clearing the blocked state. | ||||