| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
af_unix: Return immediately when manage_oob() returns NULL for 0-length buffer.
Fahad Alharbi reported that recv(0, MSG_PEEK) triggers busy-wait
in unix_stream_read_generic() if recv() is blocking and the last
skb in the queue is MSG_OOB skb.
In such a situation, TCP returns 0 immediately regardless of
blocking or non-blocking.
Let's follow the behaviour. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: codel: bound the dropping loop per dequeue call
The CoDel control law schedules the next drop one interval/sqrt(count)
after the previous drop, using the configured interval
(codel_params.interval). For very small intervals the scheduled step
rounds down to zero, so the dropping loop in codel_dequeue() never
advances and drains the entire backlog under the qdisc lock in one
call - an unprivileged user can trigger a soft lockup this way.
Fix in the shared codel code used by both codel and fq_codel:
1. Make the control-law step at least 1 tick so the dropping loop
always moves forward.
2. Cap the dropping loop at CODEL_MAX_DROPS_PER_DEQUEUE (256) drops
per codel_dequeue() call, resyncing drop_next to now when the cap
is hit: the catch-up owed to the loop grows with the idle gap and
the backlog, which no interval threshold can bound. This is a
deliberate behaviour change after long idle gaps.
The cap applies to fq_codel (4b549a2ef4be) and the mac80211 TXQ path
(fixed interval, cap only).
The target sojourn delay (codel_params.target) is not validated: it
does not feed the control law, so a sub-tick value is aggressive
rather than deadlock-prone.
Conditions to recreate the bug:
- tc qdisc add dev lo root handle 1: tbf rate 1kbit burst 2kb limit 1000000
- tc qdisc add dev lo parent 1:1 handle 10: codel interval 2us target 1ms noecn limit 1000000 (same for fq_codel)
- unpatched kernel: tc accepts it; a UDP flood under the 1kbit tbf
soft-lockups (watchdog: BUG: soft lockup) while one
codel_dequeue() call drops the backlog under the qdisc lock
- patched kernel: same setup, at most 256 drops per dequeue call,
no soft lockup
Testing: claim reproducer and interval 2us/3us variants run clean;
tdc qdisc category passes (see the selftests patch). |
| Junrar is an open source Java RAR archive library. Prior to 7.6.1, RarVM.ExecuteCode in src/main/java/com/github/junrar/unpack/vm/RarVM.java can repeatedly execute a VM_JMP instruction whose target is greater than or equal to the prepared program's codeSize. The setIP() function returns success without changing the instruction pointer or decrementing maxOpCount, and the jump handler continues before loop-end accounting, leaving both values unchanged. A crafted RAR4 archive can therefore keep an extraction thread in an infinite CPU loop and exhaust archive-processing worker capacity. The RAR virtual machine does not expose native process execution, so the supported impact is availability loss rather than code execution. This issue is fixed in version 7.6.1. |
| tinytag is a Python library for reading audio file metadata. From 2.0.0 until 2.3.0, an M4A file containing a sub-atom with a size of zero inside a ---- atom can cause the metadata parser to stop advancing through the input. The custom-field atom traversal repeatedly processes the malformed location, causing an infinite loop and denying service to a program that reads the crafted file. This issue is fixed in version 2.3.0. |
| An issue was discovered in cp-demangle.c in GNU libiberty, as distributed in GNU Binutils 2.31. There is a stack consumption vulnerability resulting from infinite recursion in the functions d_name(), d_encoding(), and d_local_name() in cp-demangle.c. Remote attackers could leverage this vulnerability to cause a denial-of-service via an ELF file, as demonstrated by nm. |
| Loop with Unreachable Exit Condition ('Infinite Loop') vulnerability in Erlang OTP stdlib (erl_tar module), hexpm hex_core (hex_erl_tar module), hexpm hex (mix_hex_erl_tar module) and erlang rebar3 (r3_hex_erl_tar module) allows an attacker who supplies a tar archive to cause a denial of service via a crafted GNU sparse member.
When erl_tar:extract/1,2 writes a member to disk, erl_tar:stream_to_file_loop/3 reads it in chunks of 65536 bytes by default. For a GNU sparse member whose sparse map ends before its real size, erl_tar:do_sparse_read/3 matches its trailing-hole clause before its zero-length clause. After the chunk is used up, the trailing-hole clause reads zero bytes, does not advance the position, and recurses forever. A 2048-byte archive keeps the extracting process and one scheduler busy until the process is killed. The {max_size, N} option prevents this only when N is below the real size of the member. Extraction with the memory option is not affected.
hex_core ships its own copy of erl_tar as hex_erl_tar, and Hex and rebar3 ship hex_core with prefixed module names (mix_hex_erl_tar and r3_hex_erl_tar). These copies contain the same code and do not call stdlib's erl_tar, so they are affected on any OTP version. OTP 28 is not affected, but an application running on OTP 28 is affected if it extracts archives through an affected version of hex_core, Hex or rebar3.
This issue affects OTP from OTP 29.0 before OTP 29.1.2, corresponding to stdlib from 8.0 before 8.1.1, and rebar3 from 3.27.1 onward, and hex from 2.4.2 before 2.5.3; hex_core: from 0.14.0 before 0.20.1. |
| OPNsense is a FreeBSD based firewall and routing platform. Prior to version 26.1.11, Firewall Rules and NAT views place stored category names and alias descriptions into HTML title attributes in filter_rule.volt and nat_rule.volt without quote-safe encoding. The response layer uses ENT_NOQUOTES, so a double quote survives and closes the attribute, allowing an event-handler attribute to be added to the existing span. A user with Firewall Categories or Firewall Alias Edit privileges can store a category name or alias description; the category must be assigned to a filter or NAT rule, or the alias must be referenced by a rule source or destination, and the rule must be saved so the affected tooltip is rendered. Script then executes in the session of an administrator or other user who opens the affected Rules or NAT page. The script can access CSRF material and perform authenticated actions as the victim. This issue is fixed in version 26.1.11. |
| FreeRDP from 3.0.0 before 3.32.0 contains an infinite loop vulnerability in http_response_recv() that allows malicious gateways to exhaust client CPU via crafted Content-Type headers. Attackers controlling a gateway can return a nonzero Content-Length with a semicolon-containing unrecognized Content-Type, pinning a client thread at full CPU indefinitely. |
| In the Linux kernel, the following vulnerability has been resolved:
eth: bnxt: avoid deadlock when canceling IRQ affinity notifier
Unregistering IRQ affinity notifiers waits for the callback synchronously.
bnxt takes the netdev instance lock in the notifier (to restart the queue)
and cancels the work under the same lock. This may obviously deadlock.
Move the restart to the async service task. The queue restart isn't
super time sensitive. Store the new TPH tag, schedule the task.
Safely canceling the service task is already ironed out.
In bnxt_request_irq() the order of registering notifier, affinity and
initial TPH programming has to be inverted. I think it was racy
previously since user may trigger an update as soon as notifier
is installed.
There's a small known gap - if pcie_tph_get_cpu_st() fails at init
and the target tag is 0 we may miss programming the entry.
This does not seem worth fixing, the code has skip-on-failure
all over the place, anyway. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid1,raid10: fix deadlock in read error recovery path
raid1d and raid10d may resubmit a split md cloned bio while handling
a read error. In this case, resubmitting the bio can lead to a deadlock
if the array is suspended before md_handle_request() acquires an
active_io reference via percpu_ref_tryget_live().
Since the cloned bio already holds an active_io reference,
trying to acquire another reference via percpu_ref_tryget_live()
can lead to a deadlock while the array is suspended.
Fix this by using percpu_ref_get() for md cloned bios. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid1,raid10: fix error-path detection with md_cloned_bio()
Detect the error path using md_cloned_bio() instead of relying
on r1_bio in raid1 or r10_bio->read_slot in raid10, which may be
NULL or -1 after splitting and resubmitting a failed bio.
As a result, the error path may not be recognized and memory
allocations can incorrectly use GFP_NOIO instead of
(GFP_NOIO | __GFP_HIGH), which can lead to a deadlock under
memory pressure. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: validate donor file superblock early in EXT4_IOC_MOVE_EXT
Reject the EXT4_IOC_MOVE_EXT ioctl early if the donor file does not
belong to the same superblock as the original file. Currently, this
validation is performed inside ext4_move_extents() by
mext_check_validity(), but only after lock_two_nondirectories() has
already acquired the inode locks. When the donor fd refers to a file
on a different filesystem (e.g., overlayfs), this late validation
creates a circular lock dependency:
CPU0 (overlayfs write) CPU1 (ext4 ioctl)
---- ----
inode_lock(ovl_inode)
mnt_want_write_file(filp)
sb_start_write(ext4_sb) [sb_writers]
backing_file_write_iter()
vfs_iter_write(real_file)
file_start_write(real_file)
sb_start_write(ext4_sb) [blocked by freeze]
lock_two_nondirectories()
inode_lock(ovl_inode) [blocked]
With a concurrent freeze operation holding sb_writers write side, this
forms a deadlock cycle: CPU0 waits for freeze to complete, freeze waits
for CPU1's sb_writers reader to exit, CPU1 waits for CPU0's inode lock.
Since EXT4_IOC_MOVE_EXT exchanges physical extents between two files,
it fundamentally requires both files to reside on the same ext4
filesystem. Moving the superblock check before any lock acquisition
is both semantically correct and eliminates the circular dependency
by ensuring that cross-filesystem donor fds are rejected before
sb_writers or inode locks are taken. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/guc: Hold device ref until queue teardown completes
GuC exec queue destruction can run asynchronously. If the final device
put happens from a destroy worker, drmm cleanup can end up draining
the same workqueue and deadlock.
Hold a drm_device reference for the queue lifetime and drop it after
queue teardown completes. This keeps drmm cleanup from running while
async destroy work is still pending.
Move GuC destroy work to a module-lifetime Xe workqueue and flush it
on PCI remove so hot-unbind/rebind still waits for pending destroy work.
With queue-held device refs, guc_submit_sw_fini() cannot run with live
GuC IDs. Replace the fini wait with an assertion and remove the unused
fini_wq.
v2:
- Rebase
v3:
- Switch to queue-lifetime drm_dev_get()/drm_dev_put() model. (Matt)
- Queue async teardown on system_dfl_wq instead of xe->destroy_wq. (Matt)
- Drop separate deferred drm_dev_put worker.
- Remove stale drain_workqueue(xe->destroy_wq) from guc_submit_sw_fini().
v4:
- Replace the guc_submit_sw_fini() wait with an assertion and remove
the now-unused fini_wq. (sashiko)
v5:
- Move destroy work to a module-lifetime Xe workqueue instead of
system_dfl_wq. (Matt)
- Flush the module-lifetime destroy workqueue during PCI remove to
preserve the old device-remove wait semantics.
v6:
- Keep SVM pagemap destroy work on the per-device destroy_wq to avoid
letting it outlive the xe_device/drm_device. (Sashiko)
- Use WQ_MEM_RECLAIM for xe->destroy_wq because SVM pagemap destroy work
can be queued from the reclaim path.
v7:
- Drop the per-device xe->destroy_wq and use the module-level destroy WQ
for SVM pagemap destroy as well. (Matt)
- Rename xe_exec_queue_destroy_wq_*() helpers to xe_destroy_wq_*()
helpers because the WQ is no longer exec-queue specific. (Matt)
v8:
- Rebase.
v9:
- Keep SVM pagemap destroy work on the per-device WQ_MEM_RECLAIM
destroy_wq because it can be queued from reclaim and embeds
the dev_pagemap used by devres teardown. (Sashiko)
- Keep the module-level destroy WQ GuC-only and drop WQ_MEM_RECLAIM
from it.
- Update the module-WQ kdoc to document the GuC/SVM split.
v10:
- Keep xe->destroy_wq per-cpu while adding WQ_MEM_RECLAIM to fix the
workqueue allocation warning.
v11:
- Drop the SVM pagemap destroy comment as it was revision-specific.
(Thomas)
v12:
- Rebase.
(cherry picked from commit da1124abac689cc2b1d8995e5f0a816f8a122edb) |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: fix packet loop on netem when duplicate is on
When netem duplicates a packet it re-enqueues the copy at the root qdisc.
If another netem sits in the tree the copy can be duplicated
again, recursing until the stack or memory is exhausted.
The original duplication guard temporarily zeroed q->duplicate around
the re-enqueue, but that does not cover all cases because it is
per-qdisc state shared across all concurrent enqueue paths
and is not safe without additional locking.
Use the skb tc_depth field introduced in an earlier patch:
- increment it on the duplicate before re-enqueue
- skip duplication for any skb whose tc_depth is already non-zero.
This marks the packet itself rather than mutating qdisc state,
therefore it is safe regardless of tree topology or concurrency. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/ttm: Fix ttm_bo_swapout() infinite LRU walk on swapout failure
When ttm_tt_swapout() fails, the current code calls
ttm_resource_add_bulk_move() followed by ttm_resource_move_to_lru_tail()
to restore the resource's bulk_move membership.
However, ttm_resource_move_to_lru_tail() places the resource at the tail
of the LRU list which, relative to the walk cursor's hitch node (placed
immediately after the resource when it was yielded), puts the resource
*in front of the* the hitch. The next list_for_each_entry_continue() from
the hitch finds the same resource again, causing an infinite loop.
Fix by deferring del_bulk_move to the success path only.
On the success path, TTM_TT_FLAG_SWAPPED has just been set by
ttm_tt_swapout() but the resource is still tracked in the bulk_move range,
so ttm_resource_del_bulk_move()'s !ttm_resource_unevictable() guard would
incorrectly skip the removal. Introduce
ttm_resource_del_bulk_move_unevictable() which bypasses that guard. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/ttm: Fix ttm_bo_shrink() infinite LRU walk on backup failure
Apply the same fix as b2ed01e7ad ("drm/ttm: Fix ttm_bo_swapout()
infinite LRU walk on swapout failure") to the ttm_bo_shrink() path.
Move del_bulk_move from before the backup to after success only,
using ttm_resource_del_bulk_move_unevictable() since the resource
is now unevictable once fully backed up. |
| Improper synchronization in the OpenVPN ovpn-dco-win for Windows versions 0.6.5 through 1.3.5 and 2.4.0 through 2.8.7 allows local attackers to trigger a deadlock via a crafted write to the ovpn-dco device, causing the host to become unresponsive. |
| In the Linux kernel, the following vulnerability has been resolved:
exec: do_close_on_exec() before taking exec_update_lock
do_close_on_exec() currently happens while holding the exec_update_lock,
which is used in a lot of places that access process state to
synchronize access checks.
I recently added another such use of exec_update_lock, causing a
regression.
do_close_on_exec() can block waiting for a reply from a filesystem.
That means a hung filesystem can block codepaths that use
exec_update_lock; and it also means that a FUSE filesystem which
attempts to inspect the calling process can deadlock.
To avoid such problems, move do_close_on_exec() before the
exec_update_lock is taken, but after the FD table has been copied if
necessary.
I have looked through all the calls between the old and new position of
the do_close_on_exec() call; there seems to be no file descriptor table
access in between. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/fcntl: fix SOFTIRQ-unsafe lock order in fasync signaling
A SOFTIRQ-safe to SOFTIRQ-unsafe lock order deadlock can occur in
send_sigio() and send_sigurg() when a process group receives a signal.
When FASYNC is configured for a process group (PIDTYPE_PGID), both
functions use read_lock(&tasklist_lock) to traverse the task list.
However, they are frequently called from softirq context:
- send_sigio() via input_inject_event -> kill_fasync
- send_sigurg() via tcp_check_urg -> sk_send_sigurg (NET_RX_SOFTIRQ)
The deadlock is caused by the rwlock writer fairness mechanism:
1. CPU 0 (process context) holds read_lock(&tasklist_lock) in do_wait().
2. CPU 1 (process context) attempts write_lock(&tasklist_lock) in
fork() or exit() and spins, which blocks all new readers.
3. CPU 0 is interrupted by a softirq (e.g., TCP URG packet reception).
4. The softirq calls send_sigurg() and attempts to acquire
read_lock(&tasklist_lock), deadlocking because CPU 1 is waiting.
Since PID hashing and do_each_pid_task() traversals are already
RCU-protected, the read_lock on tasklist_lock is no longer strictly
required for safe traversal. Fix this by replacing tasklist_lock with
rcu_read_lock(), aligning the process group signaling path with the
single-PID path. This also mitigates a potential remote denial of
service vector via TCP URG packets.
Lockdep splat:
=====================================================
WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected
[...]
Chain exists of:
&dev->event_lock --> &f_owner->lock --> tasklist_lock
Possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(tasklist_lock);
local_irq_disable();
lock(&dev->event_lock);
lock(&f_owner->lock);
<Interrupt>
lock(&dev->event_lock);
*** DEADLOCK *** |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/poll: fix signed comparison in io_poll_get_ownership()
io_poll_get_ownership() uses a signed comparison to check whether
poll_refs has reached the threshold for the slowpath:
if (unlikely(atomic_read(&req->poll_refs) >= IO_POLL_REF_BIAS))
atomic_read() returns int (signed). When IO_POLL_CANCEL_FLAG
(BIT(31)) is set in poll_refs, the value becomes negative in
signed arithmetic, so the >= 128 comparison always evaluates to
false and the slowpath is never taken.
Fix this by casting the atomic_read() result to unsigned int
before the comparison, so that the cancel flag is treated as a
large positive value and correctly triggers the slowpath. |
