| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
vhost: invalidate vring access on IOTLB transitions
When VIRTIO_F_ACCESS_PLATFORM changes, cached vring pointers and IOTLB
metadata are interpreted in a different address space. Keeping them
across the transition can leave stale ring mappings in use.
Clearing d->iotlb before taking the VQ locks also lets a worker observe
a transient NULL d->iotlb and fall back to d->umem while translating a
descriptor.
Add a common vhost_clear_device_iotlb() helper for vhost-net and
vhost-vsock. Take all VQ mutexes in index order before dropping the
device-wide IOTLB, invalidate each VQ's cached ring access and metadata,
clear pending IOTLB messages, and free the old table after the handoff.
This serializes the transition with workers and prevents mixed address
space mappings.
On the first direct-to-IOTLB transition, invalidate the cached vring
addresses. When an existing device IOTLB is replaced, preserve the
GIOVA ring addresses and reset only the metadata cache. After clearing
ACCESS_PLATFORM, userspace must configure the vring addresses for the
new address mode.
vhost_vq_invalidate_access() clears desc, avail, and used together.
Treat the VQ as invalidated only when all three are NULL, since a single
GIOVA address may legitimately be zero. |
| In the Linux kernel, the following vulnerability has been resolved:
ext2: Fix lost inode updates for IS_SYNC inodes
ext2_setsize() and ext2_xattr_set2() had a construct like:
if (IS_SYNC(inode)) {
sync_inode_metadata(inode, 1);
} else {
mark_inode_dirty(inode);
}
which leads to lost inode updates for IS_SYNC inodes because
sync_inode_metadata() does anything only if the inode is already dirty
and hence inode updates may be simply lost. Fix the problem by
unconditionally marking the inode dirty and *then* call
sync_inode_metadata(). |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: vgic: Fix race between LPI release and re-registration
Fix a potential race between decrementing an LPI's reference count and
evicting that structure from the LPI xarray.
LPI structures are maintained in the VGIC LPI xarray (dist->lpi_xa).
When the reference count of an LPI structure drops to zero,
vgic_release_lpi_locked() removes the structure from the xarray and
frees it under the xarray lock.
However, the release of an LPI can race with a concurrent LPI
re-registration with the same INTID via vgic_add_lpi() on another CPU,
since the reference count drop and the xarray eviction are not performed
in a single atomic step. This can happen e.g. if the guest issues a
DISCARD while the LPI is still referenced from a vCPU's active-pending
list (ap_list), and the same INTID is re-mapped via MAPTI.
Particularly, vgic_release_lpi_locked() is called from two distinct
paths: direct release via vgic_put_irq(), and deferred release via
vgic_release_deleted_lpis(). During direct release, the issue can result
in deleting a newly registered LPI from the xarray:
CPU0 (Releasing LPI) CPU1 (Adding new LPI)
==================== =====================
vgic_put_irq()
__vgic_put_irq()
refcount_dec_and_test()
vgic_add_lpi()
xa_lock_irqsave()
old_irq = xa_load(.., intid)
vgic_try_get_irq_ref(old_irq) == false
new IRQ inserted --> __xa_store(.., intid, ..)
xa_unlock_irqrestore()
xa_lock_irqsave();
vgic_release_lpi_locked()
__xa_erase(.., irq->intid) <-- BUG: new IRQ is erased
kfree_rcu(old_irq)
During the deferred release path, the old IRQ can be leaked:
CPU0 (Releasing LPI) CPU1 (Adding new LPI)
==================== =====================
vgic_put_irq_norelease()
__vgic_put_irq()
refcount_dec_and_test()
irq->pending_release = true
vgic_add_lpi()
xa_lock_irqsave()
old_irq = xa_load(.., intid)
vgic_try_get_irq_ref(oldirq) == false
BUG: old IRQ overwritten --> __xa_store(.., intid, ..)
xa_unlock_irqrestore()
vgic_release_deleted_lpis()
xa_lock_irqsave()
xa_for_each() { .. } <-- old IRQ with pending_release = true
is gone, so it cannot be released
To fix the direct release path, move the reference count drop inside
the xarray lock, making sure that vgic_add_lpi() never encounters the
to-be-released LPI.
In the deferred release path, the refcount drop must happen under a raw
spinlock, so the xarray lock cannot be grabbed, and the same solution
does not work. Instead, update vgic_add_lpi(), so that if it evicts
an LPI from the xarray, it takes on the responsibility of freeing it.
Consequently, an LPI may now be freed concurrently after a deferred
release drops the refcount, so accessing the pending_release field is no
longer safe from use-after-free. Delete all uses of the flag, and update
vgic_release_deleted_lpis() to identify orphaned LPIs purely based on
their refcount. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_dup_netdev: add nf_dev_xmit_recursion*() helpers and use them
Update nft_dup and nft_fwd to use the nf_dev_xmit_recursion() helpers.
This patch also disables BH when transmitting the skb to address a
possible migration to different CPU leading to imbalanced decrementation
of the recursion counters.
This is modeled after Florian Westphal's dev_xmit_recursion*() API
available since commit 97cdcf37b57e ("net: place xmit recursion in
softnet data") according to its current state in the tree. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: add hook transactions for device deletions
Restore the flag that indicates that the hook is going away, ie.
NFT_HOOK_REMOVE, but add a new transaction object to track deletion
of hooks without altering the basechain/flowtable hook_list during
the preparation phase.
The existing approach that moves the hook from the basechain/flowtable
hook_list to transaction hook_list breaks netlink dump path readers
of this RCU-protected list.
It should be possible use an array for nft_trans_hook to store the
deleted hooks to compact the representation but I am not expecting
many hook object, specially now that wildcard support for devices
is in place.
Note that the nft_trans_chain_hooks() list contains a list of struct
nft_trans_hook objects for DELCHAIN and DELFLOWTABLE commands, while
this list stores struct nft_hook objects for NEWCHAIN and NEWFLOWTABLE.
Note that new commands can be updated to use nft_trans_hook for
consistency.
This patch also adapts the event notification path to deal with the list
of hook transactions. |
| In the Linux kernel, the following vulnerability has been resolved:
ublk: reset per-IO canceled flag on each fetch
If a ublk server starts recovering devices but dies before issuing fetch
commands for all IOs, cancellation of the fetch commands that were
successfully issued may never complete. This is because the per-IO
canceled flag can remain set even after the fetch for that IO has been
submitted - the per-IO canceled flags for all IOs in a queue are reset
together only once all IOs for that queue have been fetched. So if a
nonempty proper subset of the IOs for a queue are fetched when the ublk
server dies, the IOs in that subset will never successfully be canceled,
as their canceled flags remain set, and this prevents ublk_cancel_cmd
from actually calling io_uring_cmd_done on the commands, despite the
fact that they are outstanding.
Fix this by resetting the per-IO cancel flags immediately when each IO
is fetched instead of waiting for all IOs for the queue (which may never
happen). |
| In the Linux kernel, the following vulnerability has been resolved:
soc/tegra: pmc: Fix unsafe generic_handle_irq() call
Currently, when resuming from system suspend on Tegra platforms,
the following warning is observed:
WARNING: CPU: 0 PID: 14459 at kernel/irq/irqdesc.c:666
Call trace:
handle_irq_desc+0x20/0x58 (P)
tegra186_pmc_wake_syscore_resume+0xe4/0x15c
syscore_resume+0x3c/0xb8
suspend_devices_and_enter+0x510/0x540
pm_suspend+0x16c/0x1d8
The warning occurs because generic_handle_irq() is being called from
a non-interrupt context which is considered as unsafe.
Fix this warning by deferring generic_handle_irq() call to an IRQ work
which gets executed in hard IRQ context where generic_handle_irq()
can be called safely.
When PREEMPT_RT kernels are used, regular IRQ work (initialized with
init_irq_work) is deferred to run in per-CPU kthreads in preemptible
context rather than hard IRQ context. Hence, use the IRQ_WORK_INIT_HARD
variant so that with PREEMPT_RT kernels, the IRQ work is processed in
hardirq context instead of being deferred to a thread which is required
for calling generic_handle_irq().
On non-PREEMPT_RT kernels, both init_irq_work() and IRQ_WORK_INIT_HARD()
execute in IRQ context, so this change has no functional impact for
standard kernel configurations.
[treding@nvidia.com: miscellaneous cleanups] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Adjust PHY FSM transition to TX_EN-to-PLL_ON for TMDS on DCN35
[Why]
A backport of the change made for DCN401 that addresses an issue where
we turn off the PHY PLL when disabling TMDS output, which causes the
OTG to remain stuck.
The OTG being stuck can lead to a hang in the DCHVM's ability to ACK
invalidations when it thinks the HUBP is still on but it's not receiving
global sync.
The transition to PLL_ON needs to be atomic as there's no guarantee
that the thread isn't pre-empted or is able to complete before the
IOMMU watchdog times out.
[How]
Backport the implementation from dcn401 back to dcn35.
There's a functional difference in when the eDP output is disabled in
dcn401 code so we don't want to utilize it directly. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: fix scheduling with atomic in timestamp sockopt
Using lock_sock_fast() (atomic context) around sock_set_timestamp()
and sock_set_timestamping() is unsafe, as both helpers can sleep.
Replace lock_sock_fast() with sleepable lock_sock()/release_sock()
to avoid scheduling while atomic panic. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: pm: ADD_ADDR rtx: fix potential data-race
This mptcp_pm_add_timer() helper is executed as a timer callback in
softirq context. To avoid any data races, the socket lock needs to be
held with bh_lock_sock().
If the socket is in use, retry again soon after, similar to what is done
with the keepalive timer. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: call sk_data_ready() after listener migration
When inet_csk_listen_stop() migrates an established child socket from
a closing listener to another socket in the same SO_REUSEPORT group,
the target listener gets a new accept-queue entry via
inet_csk_reqsk_queue_add(), but that path never notifies the target
listener's waiters. A nonblocking accept() still works because it
checks the queue directly, but poll()/epoll_wait() waiters and
blocking accept() callers can also remain asleep indefinitely.
Call READ_ONCE(nsk->sk_data_ready)(nsk) after a successful migration
in inet_csk_listen_stop().
However, after inet_csk_reqsk_queue_add() succeeds, the ref acquired
in reuseport_migrate_sock() is effectively transferred to
nreq->rsk_listener. Another CPU can then dequeue nreq via accept()
or listener shutdown, hit reqsk_put(), and drop that listener ref.
Since listeners are SOCK_RCU_FREE, wrap the post-queue_add()
dereferences of nsk in rcu_read_lock()/rcu_read_unlock(), which also
covers the existing sock_net(nsk) access in that path.
The reqsk_timer_handler() path does not need the same changes for two
reasons: half-open requests become readable only after the final ACK,
where tcp_child_process() already wakes the listener; and once nreq is
visible via inet_ehash_insert(), the success path no longer touches
nsk directly. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix call removal to use RCU safe deletion
Fix rxrpc call removal from the rxnet->calls list to use list_del_rcu()
rather than list_del_init() to prevent stuffing up reading
/proc/net/rxrpc/calls from potentially getting into an infinite loop.
This, however, means that list_empty() no longer works on an entry that's
been deleted from the list, making it harder to detect prior deletion. Fix
this by:
Firstly, make rxrpc_destroy_all_calls() only dump the first ten calls that
are unexpectedly still on the list. Limiting the number of steps means
there's no need to call cond_resched() or to remove calls from the list
here, thereby eliminating the need for rxrpc_put_call() to check for that.
rxrpc_put_call() can then be fixed to unconditionally delete the call from
the list as it is the only place that the deletion occurs. |
| In the Linux kernel, the following vulnerability has been resolved:
net: macb: Use dev_consume_skb_any() to free TX SKBs
The napi_consume_skb() function is not intended to be called in an IRQ
disabled context. However, after commit 6bc8a5098bf4 ("net: macb: Fix
tx_ptr_lock locking"), the freeing of TX SKBs is performed with IRQs
disabled. To resolve the following call trace, use dev_consume_skb_any()
for freeing TX SKBs:
WARNING: kernel/softirq.c:430 at __local_bh_enable_ip+0x174/0x188, CPU#0: ksoftirqd/0/15
Modules linked in:
CPU: 0 UID: 0 PID: 15 Comm: ksoftirqd/0 Not tainted 7.0.0-rc4-next-20260319-yocto-standard-dirty #37 PREEMPT
Hardware name: ZynqMP ZCU102 Rev1.1 (DT)
pstate: 200000c5 (nzCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __local_bh_enable_ip+0x174/0x188
lr : local_bh_enable+0x24/0x38
sp : ffff800082b3bb10
x29: ffff800082b3bb10 x28: ffff0008031f3c00 x27: 000000000011ede0
x26: ffff000800a7ff00 x25: ffff800083937ce8 x24: 0000000000017a80
x23: ffff000803243a78 x22: 0000000000000040 x21: 0000000000000000
x20: ffff000800394c80 x19: 0000000000000200 x18: 0000000000000001
x17: 0000000000000001 x16: ffff000803240000 x15: 0000000000000000
x14: ffffffffffffffff x13: 0000000000000028 x12: ffff000800395650
x11: ffff8000821d1528 x10: ffff800081c2bc08 x9 : ffff800081c1e258
x8 : 0000000100000301 x7 : ffff8000810426ec x6 : 0000000000000000
x5 : 0000000000000001 x4 : 0000000000000001 x3 : 0000000000000000
x2 : 0000000000000008 x1 : 0000000000000200 x0 : ffff8000810428dc
Call trace:
__local_bh_enable_ip+0x174/0x188 (P)
local_bh_enable+0x24/0x38
skb_attempt_defer_free+0x190/0x1d8
napi_consume_skb+0x58/0x108
macb_tx_poll+0x1a4/0x558
__napi_poll+0x50/0x198
net_rx_action+0x1f4/0x3d8
handle_softirqs+0x16c/0x560
run_ksoftirqd+0x44/0x80
smpboot_thread_fn+0x1d8/0x338
kthread+0x120/0x150
ret_from_fork+0x10/0x20
irq event stamp: 29751
hardirqs last enabled at (29750): [<ffff8000813be184>] _raw_spin_unlock_irqrestore+0x44/0x88
hardirqs last disabled at (29751): [<ffff8000813bdf60>] _raw_spin_lock_irqsave+0x38/0x98
softirqs last enabled at (29150): [<ffff8000800f1aec>] handle_softirqs+0x504/0x560
softirqs last disabled at (29153): [<ffff8000800f2fec>] run_ksoftirqd+0x44/0x80 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: libertas: fix use-after-free in lbs_free_adapter()
The lbs_free_adapter() function uses timer_delete() (non-synchronous)
for both command_timer and tx_lockup_timer before the structure is
freed. This is incorrect because timer_delete() does not wait for
any running timer callback to complete.
If a timer callback is executing when lbs_free_adapter() is called,
the callback will access freed memory since lbs_cfg_free() frees the
containing structure immediately after lbs_free_adapter() returns.
Both timer callbacks (lbs_cmd_timeout_handler and lbs_tx_lockup_handler)
access priv->driver_lock, priv->cur_cmd, priv->dev, and other fields,
which would all be use-after-free violations.
Use timer_delete_sync() instead to ensure any running timer callback
has completed before returning.
This bug was introduced in commit 8f641d93c38a ("libertas: detect TX
lockups and reset hardware") where del_timer() was used instead of
del_timer_sync() in the cleanup path. The command_timer has had the
same issue since the driver was first written. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: mst: move switchdev call outside rcu
This is a follow-up of one of sashiko's pre-existing bug reports.
br_mst_set_state() calls switchdev_port_attr_set() for nonzero MSTIs
while holding rcu_read_lock() which invokes the blocking switchdev
notifier chain and may sleep. Nonzero MSTI changes come from netlink
with rtnl held. Move the switchdev call before entering the rcu section and
assert that rtnl is held.
The call cannot be deferred because netlink needs its error and extack.
Also DSA reads the old bridge MST state during the callback and checks it.
A deferred callback will be late and will see the updated state. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: filemap: retain mapped dropbehind folios
Fault-around can map ready dropbehind folios without going through the
normal page-cache lookup that clears dropbehind. A mapping represents a
competing cached user, so retain the folio instead of forcibly unmapping
it when writeback completes.
For a mapped folio, folio_unmap_invalidate() can call
unmap_mapping_folio(), which takes i_mmap_rwsem and may sleep. Retaining
mapped folios avoids this path when folio_end_dropbehind() runs in
non-preemptible task context.
Tal was able to trigger a sleeping-in-atomic warning due to this [1].
Unmapped dropbehind folios continue through the existing invalidation path. |
| In the Linux kernel, the following vulnerability has been resolved:
net/rds: use wq_has_sleeper() in release_in_xmit()
release_in_xmit() clears RDS_IN_XMIT with clear_bit_unlock() and then
checks waitqueue_active() to decide whether anyone needs waking.
clear_bit_unlock() is only a release operation: it orders the
critical section before the bit clear, but does not order the
subsequent plain load of the wait queue head after it. The waiter
side does the mirror image - it adds itself to the wait queue and
then tests the bit. That is the classic store-buffering pattern: the
releasing CPU can read the wait queue as empty while the waiting CPU
still reads the bit as set, so the sleeper is never woken.
The waiters are rds_conn_shutdown() and rds_tcp_reset_callbacks(),
both in uninterruptible wait_event() with no timeout. A lost wake-up
strands the shutdown worker on its single-threaded workqueue until
some other sender releases the bit again - and on a connection that
is being torn down precisely because it failed, there may never be
another sender.
The barrier used to be there: release_in_xmit() did clear_bit()
followed by smp_mb__after_atomic() until commit 1422f28826d2 ("rds:
introduce acquire/release ordering in acquire/release_in_xmit()")
folded both into clear_bit_unlock(), which strengthened the lock
hand-off but silently dropped the full barrier the wake-up check
depends on. The refill counterpart, release_refill() in
net/rds/ib_recv.c, still carries its smp_mb__after_atomic() for
exactly this reason.
Use wq_has_sleeper(), which is waitqueue_active() preceded by the
required full barrier. |
| In the Linux kernel, the following vulnerability has been resolved:
net: au1000: move free_irq out of the close-time spinlocked section
au1000_close() calls free_irq() while aup->lock is still held with
spin_lock_irqsave(). free_irq() can sleep because it takes the IRQ
descriptor request mutex, so it does not belong inside the close-time
spinlocked section.
This was found by our static analysis tool and then confirmed by manual
review of the in-tree au1000_close() .ndo_stop path. The reviewed path
keeps aup->lock held across the MAC reset, queue stop and
free_irq(dev->irq, dev).
A directed runtime validation kept that ndo_stop carrier and the same
free_irq(dev->irq, dev) operation under the driver lock. Lockdep reported
"BUG: sleeping function called from invalid context" and "Invalid wait
context" while free_irq() was taking desc->request_mutex, with
au1000_close() and free_irq() on the stack.
Drop aup->lock before freeing the IRQ. The protected close-time work still
stops the device and queue before IRQ teardown, but the sleepable IRQ core
path now runs outside the spinlocked section. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: join hook list via splice_list_rcu() in commit phase
Publish new hooks in the list into the basechain/flowtable using
splice_list_rcu() to ensure netlink dump list traversal via rcu is safe
while concurrent ruleset update is going on. |
| In the Linux kernel, the following vulnerability has been resolved:
gfs2: fix quota init duplicate scan
gfs2_quota_init() checks for duplicate quota_change IDs while holding
qd_lock and the quota hash bucket bitlock. That path used
gfs2_qd_search_bucket(), which takes a lockref reference via
lockref_get_not_dead().
On PREEMPT_RT this may sleep, which is not allowed under the bucket
bitlock, triggering "sleeping function called from invalid context".
Use a no-ref bucket lookup in this path, then continue duplicate
handling without taking a lockref there.
Refactor gfs2_qd_search_bucket() to build on top of the no-ref helper
so lookup traversal stays in one place.
This patch fixes a bug reported by syzbot. |
