| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The FluentCart A New Era of eCommerce – Faster, Lighter, and Simpler plugin for WordPress is vulnerable to Insecure Direct Object Reference in all versions up to, and including, 1.7.0 via the 'order_id + billing_address_id (also shipping_address_id)' parameter due to missing validation on a user controlled key. This makes it possible for unauthenticated attackers to read and exfiltrate another customer's stored billing and shipping address PII — including street address, city, state, postcode, phone number, company name, VAT number, and legal registration ID — by enumerating sequential AUTO_INCREMENT order and address ID pairs. The id-equality guard intended to restrict address reuse is bypassed because the attacker controls both halves of the compared pair, and the unauthenticated AJAX entry point imposes only a soft rate limit of 5 requests per 60 seconds rather than any authentication or ownership check. |
| The Apache Airflow Keycloak auth manager did not end the session on logout: the logout route revoked the presented token, but `KeycloakJWTMiddleware` then issued a new, unrevoked token on the same response, so the user stayed logged in. Deployments using the Keycloak auth manager are affected: after a user logs out, anyone with later access to the same browser (for example on a shared workstation) can continue to act as that user.
Users of apache-airflow-providers-keycloak are recommended to upgrade to apache-airflow-providers-keycloak 0.11.1 or later. |
| The Dokan: AI Powered WooCommerce Multivendor Marketplace Solution – Build Your Own Amazon, eBay, Etsy plugin for WordPress is vulnerable to Insecure Direct Object Reference in all versions up to, and including, 5.2.1 via the 'password' parameter due to missing validation on a user controlled key. This makes it possible for authenticated attackers, with custom-level access and above, to change the WordPress account password of any customer who has placed at least one order with the attacking vendor, enabling login as that customer and resulting in a limited account takeover. Vendor-level access, required to exploit this vulnerability, can be self-registered through the public 'I am a vendor' registration flow when that option is enabled on the site. |
| Wheels 4.0.0 through 4.1.2 before 4.2.0 replaces incoming scope conditions with a primary-key condition in findByKey() and exists(key=). For exists(key=), production with error information disabled returns true for an out-of-scope key instead of throwing. Applications relying on scopes for ownership or tenant authorization can therefore load and subsequently modify or delete another user's or tenant's record when the key comes from a request. The 4.2.0 fix combines key conditions with incoming scope, query-builder or where conditions in findByKey(), exists(key=), updateByKey() and deleteByKey(). Other scope-aware finders, aggregates, updateAll() and deleteAll() are not affected. |
| Authorization bypass through User-Controlled key vulnerability in HYPR Passwordless on Windows allows Privilege Escalation.
This issue affects HYPR Passwordless: before 11.3.3. |
| Nezha from 2.1.0 before 2.3.15 contains a host header injection vulnerability in mintTransferTool that builds fs.download_url and fs.upload_url transfer URLs from the unvalidated Host header. Attackers who control the Host header seen on a victim's MCP request can redirect file uploads or capture one-time download tokens and replay them to exfiltrate files. |
| Nix before 2.35.3 and Lix before 2.95.4 allow privilege escalation via a repair operation because it could destroy and then replace a store path before content verification. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: don't warn when an IBSS has no channel to scan
ieee80211_request_ibss_scan() warns when regulatory leaves no
allowed channel, but that can happen as the regdomain can change
while IBSS is operating, and it can continue to operate briefly
during the 60s grace period until it's shut down.
Just remove the warning in this case. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: skip gfx switch_power_profile during GPU reset
During resume from GPU reset, the gfx idle work may invoke switch_power_profile
before the reset completes. This causes the following assert error because the
register access occurs without first releasing the GPU reset semaphore:
[ 1576.768935] CR2: 0000559ea133ead0 CR3: 00000002e6c42000 CR4: 0000000000350ef0
[ 1576.768940] Call Trace:
[ 1576.768944] <TASK>
[ 1576.768953] amdgpu_device_rreg+0x21/0x50 [amdgpu]
[ 1576.769158] smu_msg_v1_send_msg+0x1a4/0x6e0 [amdgpu]
[ 1576.769437] smu_cmn_send_smc_msg_with_params_ext+0xba/0x120 [amdgpu]
[ 1576.769721] smu_cmn_send_smc_msg_with_param+0x33/0x40 [amdgpu]
[ 1576.769993] smu_v13_0_0_set_power_profile_mode+0x192/0x2b0 [amdgpu]
[ 1576.770267] smu_bump_power_profile_mode+0x5d/0x80 [amdgpu]
[ 1576.770538] smu_switch_power_profile+0xa4/0xf0 [amdgpu]
[ 1576.770839] amdgpu_dpm_switch_power_profile+0x6f/0x90 [amdgpu]
[ 1576.771210] amdgpu_gfx_profile_idle_work_handler+0xe9/0x130 [amdgpu]
[ 1576.771460] process_one_work+0x23e/0x6f0
[ 1576.771491] worker_thread+0x1c4/0x380
[ 1576.771506] kthread+0x10c/0x150
[ 1576.771512] ? __pfx_worker_thread+0x10/0x10
[ 1576.771518] ? __pfx_kthread+0x10/0x10
[ 1576.771530] ret_from_fork+0x314/0x390
[ 1576.771537] ? __pfx_kthread+0x10/0x10
[ 1576.771546] ret_from_fork_asm+0x1a/0x30
(cherry picked from commit d93b1ff538ce9750c01e0dd0aa62575579c0fc08) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Guard page-fault worker with runtime PM check
During VM teardown, the VM's runtime PM reference is dropped
asynchronously, allowing the device to autosuspend while stale page
faults belonging to the now-dead VM are still queued. When the
page-fault worker later tries to ack one of these, it calls into
guc_ct_send_locked() on an already-suspended device, tripping:
Assertion `!xe_pm_runtime_suspended(xe)` failed!
WARNING at xe_device.c:1267 xe_device_assert_mem_access+0x11c/0x140 [xe]
A live VM/exec queue always holds a PM reference while it has
outstanding work, so if the device is suspended at ack time, the
owning context is already gone and the fault is stale.
Take a runtime PM reference across the entire pagefault
queue worker to safely deliver acks for torn-down VMs.
v3:
- Move PM ref to the generic xe_pagefault_queue_work using
guard(xe_pm_runtime)(xe) instead of tracking it in the GuC
backend(Matt Brost).
v2:
- Hold PM ref across the entire batch (begin/end) instead of per-ack.
This prevents the device from autosuspending mid-batch, which would
leave write_only acks written but the end flush skipped, and skip
counter++, desyncing the cadence check.(Himal)
- Add a comment explaining stale faults.(Himal)
(cherry picked from commit fcc2431d2213dc4d04250c4f1ae87d9c3ae0d455)
[Rodrigo: Added xe_device struct for compatibility while cherry-picking] |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/entry: Fix irq_soft_mask corruption on replayed interrupt exit
When __replay_soft_interrupts() replays a pending interrupt (e.g.
PACA_IRQ_DEC -> timer_interrupt), it calls the handler directly with a
synthetic pt_regs. The DEFINE_INTERRUPT_HANDLER_ASYNC wrapper around
each handler calls arch_interrupt_async_exit_prepare() on the way out,
which calls arch_interrupt_exit_prepare() -> local_irq_disable() ->
arch_local_irq_disable(), which does:
irq_soft_mask_set(IRQS_DISABLED) /* 0x1 */
This unconditionally overwrites irq_soft_mask with IRQS_DISABLED (0x1),
stripping the IRQS_PMI_DISABLED (0x2) bit. The result is that
irq_soft_mask is 0x1 instead of IRQS_ALL_DISABLED (0x3) when the
handler returns to __replay_soft_interrupts().
For a normally-taken interrupt this is harmless: the next interrupt
always enters through arch_interrupt_enter_prepare() which
unconditionally sets irq_soft_mask to IRQS_ALL_DISABLED. But during
replay, next_interrupt() is called directly between replayed handlers
without going back through arch_interrupt_enter_prepare(), so the
stripped bit is never restored. next_interrupt() then fires a WARNING:
WARNING: arch/powerpc/kernel/irq_64.c:75
WARN_ON(irq_soft_mask_return() != IRQS_ALL_DISABLED)
The warning was observed early in boot on a POWER10 pseries guest
during kmem_cache_init_late(), where a spinlock release triggers
interrupt replay that processes a pending timer interrupt.
Debugger state confirming the bug:
Before timer_interrupt(®s):
irq_soft_mask = 0x3 (IRQS_ALL_DISABLED) correct
irq_happened = 0x41 (HARD_DIS|REPLAYING) correct
After timer_interrupt(®s) returns:
irq_soft_mask = 0x1 (IRQS_DISABLED) WRONG - PMI bit stripped
irq_happened = 0x41 unchanged
The fix is to replace local_irq_disable() with hard_irq_disable().
hard_irq_disable() is the right primitive here for two reasons:
1. On PPC64 (hw_irq.h:301) it calls irq_soft_mask_set_return(IRQS_ALL_DISABLED),
setting the soft mask to 0x3 (both IRQS_DISABLED and IRQS_PMI_DISABLED),
which preserves the PMI bit and fixes the WARNING. The additional
work it does (__hard_irq_disable(), PACA_IRQ_HARD_DIS |=) is
redundant but safe since both are already set at this point in the
exit path; the trace_hardirqs_off() inside is guarded by
if (!arch_irqs_disabled_flags(flags)) so it will not double-fire.
2. On PPC32 (hw_irq.h:467) hard_irq_disable() maps to
arch_local_irq_disable() -> __hard_irq_disable(), which clears
MSR[EE] in hardware. This is exactly correct: PPC32 has no soft-mask
PACA mechanism, so the hardware disable is the right way to satisfy
irqentry_exit()'s requirement. This also fixes a build error on PPC32
where irq_soft_mask_set() is only defined under CONFIG_PPC64:
arch/powerpc/include/asm/entry-common.h:273: error: implicit
declaration of function 'irq_soft_mask_set'
Using hard_irq_disable() requires no #ifdef and is consistent with
how the rest of the entry code (e.g. entry-common.h:463) handles the
same PPC32/PPC64 split. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: require a peer station for TDLS setup confirm
It's nonsense for the setup confirm to go to station that
doesn't even exist, and it hits a warning when building
the frame:
WARN_ON_ONCE(!sta || !ap_sta)
Only accept WLAN_TDLS_SETUP_CONFIRM when the station is
already there as a TDLS station. Need to copy the call
to ieee80211_tdls_prep_mgmt_packet() since the existing
WLAN_TDLS_DISCOVERY_REQUEST already falls through to it. |
| In the Linux kernel, the following vulnerability has been resolved:
net: iptunnel: fix stale transport header during tunnel decapsulation
Syzbot reported a crash in qdisc_pkt_len_segs_init() caused by a stale
transport_header offset after tunnel decapsulation.
BUG: unable to handle page fault for address: ffffed102091a42e
Oops: Oops: 0000 [#1] SMP KASAN NOPTI
CPU: 0 UID: 0 PID: 340 Comm: qdisc_uaf_repro Not tainted 7.2.0-rc4-00061-g248951ddc14d #256 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:__asan_load2
<IRQ>
qdisc_pkt_len_segs_init (net/core/dev.c:4145)
__dev_queue_xmit (net/core/dev.c:4787)
br_dev_queue_push_xmit (net/bridge/br_forward.c:53)
br_handle_frame_finish (net/bridge/br_input.c:229)
br_handle_frame (net/bridge/br_input.c:315)
__netif_receive_skb_core.constprop.0 (net/core/dev.c:6099)
__netif_receive_skb_list_core (net/core/dev.c:6287)
netif_receive_skb_list_internal (net/core/dev.c:6445)
napi_complete_done (net/core/dev.c:6813)
gro_cell_poll (net/core/gro_cells.c:74)
__napi_poll (net/core/dev.c:7735)
net_rx_action (net/core/dev.c:7798 net/core/dev.c:7955)
handle_softirqs (kernel/softirq.c:622)
do_softirq (kernel/softirq.c:523 kernel/softirq.c:510 )
__local_bh_enable_ip (kernel/softirq.c:450)
tun_get_user (drivers/net/tun.c:1986 (discriminator 1))
tun_chr_write_iter (drivers/net/tun.c:2032)
The issue is completely latent until qdisc read transport header in
commit 7fb4c1967011 ("net: pull headers in qdisc_pkt_len_segs_init()").
The crash requires four conditions to line up:
1. The incoming packet is encapsulated and carries GSO metadata. The outer
transport header offset is stored in skb->transport_header while the
packet is still in the outer tunnel context.
2. The tunnel receiver strips the outer headers. skb->data is advanced to
the inner frame, but skb->transport_header is left pointing to the
now-removed outer L4 header, so it becomes a negative offset relative to
the new data.
3. The inner frame is not delivered to the local IP stack. Instead, it
is forwarded at L2 by a bridge or HSR, so ip_rcv_core() never runs and
the transport header is not reset to the inner L4 offset.
4. The forwarding path calls __dev_queue_xmit(), which enters
qdisc_pkt_len_segs_init(). That function computes the GSO header length
from skb_transport_offset(skb). Because the offset is negative, the
unsigned cast overflows and pskb_may_pull(skb, hdr_len +
sizeof(struct tcphdr)) reads past the end of the skb, triggering a
KASAN fault or page fault.
The issue specifically requires GSO packets (shinfo->gso_size != 0), which
are processed/aggregated through gro_cells. Fix this by clearing
transport_header to the ~0U sentinel in gro_cell for all tunnnel driver.
GTP does not support GRO/GSO, drop the evil GSO packets in GTP directly. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: reset the AP_VLAN tailroom counter on ifdown
On ifup, AP_VLAN interfaces get crypto_tx_tailroom_needed_cnt from
the AP interface, but it's never decremented again unless the AP is
also brought down. Thus, bringing the same AP_VLAN up again will
increment the counter again and eventually hit the sanity check:
WARN_ON_ONCE(sdata->crypto_tx_tailroom_needed_cnt !=
master->crypto_tx_tailroom_needed_cnt);
Reset it on ifdown to avoid that. |
| Dell PowerScale InsightIQ, versions 5.2.0 through 6.3.0, contains an Overly Restrictive Account Lockout Mechanism vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to Denial of service. |
| ClassroomIO through 1.0.0 contains an insecure direct object reference vulnerability in the Hono API course submission routes that allows course tutors or admins to modify submissions in other courses. Attackers can supply their own course id with another course's submission UUID to PUT or DELETE handlers to overwrite answers, grades, feedback, and grading status or delete submissions. |
| cool-admin-midway through 8.0.0 contains an authorization bypass vulnerability that allows department-limited admins to manage users outside their departments by supplying arbitrary user ids. Attackers holding sys:user:* permissions can call /admin/sys/user/info, update, or delete to read records, reset passwords and roles, or delete accounts. |
| cool-admin-midway through 8.0.0 contains an authorization bypass vulnerability that allows non-superadmin admins to read, modify, or delete other admins' roles by supplying arbitrary role ids. Attackers holding ordinary sys:role permissions can call /admin/sys/role/info, update, or delete with another admin's role id to rewrite menu and department grants, changing other users' effective access. |
| MinDoc through 2.2-beta.2 contains an insecure direct object reference vulnerability in DocumentController.Content that allows authenticated users to read documents from unauthorized books. Attackers holding a non-observer role on any book can name that book and iterate sequential document ids to read markdown and HTML from private books. |
| BISHENG through 3.0.0-beta4 contains an insecure direct object reference vulnerability that allows authenticated low-privileged users to read other users' parsed documents by supplying arbitrary file_id values. Attackers can enumerate sequential file ids against GET /api/v1/knowledge/file_bbox to retrieve extracted page text from other users' and tenants' knowledge bases. |
