| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Sandbox escape due to race condition in the Networking component. This vulnerability was fixed in Firefox 158, Firefox ESR 153.5, Thunderbird 158, and Thunderbird 153.5. |
| Progress MarkLogic Server 12.x releases before 12.1.0 and 11.x releases before 11.3.7 contain privileged legacy InfoStudio modules that do not sufficiently validate user-controlled file paths and user-context values. Exploitation could result in unauthorized access to server files or execution under an unintended identity. |
| The Membership & User Roles for WooCommerce (Automatic Role Changer) plugin for WordPress is vulnerable to Privilege Escalation in versions up to, and including, 20260828. This is due to the `maybe_add_role_to_user()` function unconditionally re-assigning every role stored in the `dfxwcrc_foreign_roles` user meta cache without verifying that each cached role is still actively assigned by the external provider — a condition made permanent by `remember_foreign_roles()`, which merges new foreign roles into the cache but never evicts roles that have since been revoked. This makes it possible for authenticated attackers with subscriber-level access and above to restore a previously revoked Administrator role to their own account, gaining full administrative control of the site, by triggering any role-assignment event such as completing a purchase for a role-mapped product. Exploitation requires Replace Roles mode to be enabled and the attacker's account to have previously received Administrator legitimately through a separate role-management mechanism while the plugin was active, so that `administrator` was written into the `dfxwcrc_foreign_roles` user meta cache before the external provider revoked it. |
| The SimpleForm – Form Maker to Chat Apps with Quiz, Poll and Multi Lead Notifications plugin for WordPress is vulnerable to Privilege Escalation in all versions up to, and including, 3.10.0 This is due to the `wp_ajax_nopriv_simpleform_wp_register` AJAX action lacking any capability check for role assignment and the `save_custom_fields_to_user_meta()` function using an exclusion list that omits `wp_capabilities`, combined with `get_form_settings()` returning a hard-coded defaults array that unconditionally enables meta writing regardless of the supplied `form_id`. This makes it possible for unauthenticated attackers to create a new Administrator-level WordPress account by supplying `wp_capabilities[administrator]=1` alongside standard registration fields. The nonce required by the endpoint is publicly emitted into the `front_end_data` JavaScript object on every front-end page via `wp_enqueue_scripts`, making it trivially obtainable by any unauthenticated visitor before submitting the malicious request. |
| util-linux is a random collection of Linux utilities. In util-linux 2.39.1 through 2.41.4 and 2.42 through 2.42.1, the SUID `mount` utility reads the attacker-controlled `LIBMOUNT_FORCE_MOUNT2` environment variable with `getenv()`, allowing a local low-privileged
user to force the non-atomic legacy bind-mount path. With an `/etc/fstab` bind mount authorized by `user` or `users` and protected by `nosuid`, `noexec`, or `nodev`, an attacker can race the window between the initial bind mount and the remount that applies those security flags and execute a SUID program from the temporarily unprotected mount, potentially gaining root privileges. This issue is fixed in 2.41.5 and 2.42.2. |
| A flaw has been found in Yungengxin Yun Jia Security Guard up to 2.7.1.9. Impacted is the function sub_14000885C in the library kgameprotect.sys. Executing a manipulation of the argument Pid can lead to improper privilege management. The attack requires local access. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability has been found in yangzongzhuan RuoYi up to 4.8.3. This affects the function checkRoleAllowed of the file /system/role/authDataScope. Such manipulation of the argument roleKey leads to improper privilege management. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| The WholesaleX – B2B & Wholesale Plugin for WooCommerce with Wholesale Prices plugin for WordPress is vulnerable to Limited Privilege Escalation in all versions up to, and including, 3.0.8 via the 'process_registration' due to missing validation on the 'wholesalex_registration_role' parameter. This makes it possible for unauthenticated attackers to register as any existing WholesaleX role. The vulnerability was partially patched in version 2.3.8. |
| Rapyd Admin from 9.0.0 before 9.20.0 contains an improper privilege management vulnerability in the UsersEdit Livewire component that allows users with the edit users permission to assign themselves the admin role. Attackers holding roles such as the shipped operator role can submit the admin role ID for their own account, lifting tenant scoping, bypassing per-record authorization, and enabling impersonation. |
| Electron is a framework for writing cross-platform desktop applications using JavaScript, HTML and CSS. Prior to 41.10.6, 42.9.2, 43.4.1, and 44.0.0-beta.5, an Electron <webview> guest could enable nodeIntegrationInWorker for its Web Workers even when the unsandboxed embedder had Node.js integration disabled, allowing untrusted guest content to create a Node-enabled worker with more privilege than the embedder granted. Applications that do not enable the <webview> tag or that keep the embedder sandboxed are not affected. This issue is fixed in versions 41.10.6, 42.9.2, 43.4.1, and 44.0.0-beta.5. |
| In `api-gateway` versions till `1.7.3`, The default rate-limit key resolver, `ClientIpKeyResolver`, derives the per-client bucket key from the leftmost element of the `X-Forwarded-For` request header. That element is supplied by the originating HTTP client and is not validated against any trusted-proxy list. A single attacker can therefore obtain an unlimited number of independent rate-limit buckets — one per unique header value — and completely bypass the gateway's request-rate limiting on every route that uses the shipped default configuration. |
| The User Rights Access Manager WordPress plugin through 1.1.3 does not restrict access to one of its AJAX account-registration handlers and assigns newly registered accounts a role that was created as a copy of the administrator role, allowing unauthenticated attackers to register an administrator-equivalent account and take over the site. |
| An issue in HTMLy v.3.1.1 allows a remote attacker to escalate privileges via the get_feed function in the admin.php component |
| The Bit integrations – Form Integration, Webhook, Spreadsheets, CRM, LMS & Email Automation plugin for WordPress is vulnerable to Privilege Escalation via Log Re-execution in all versions up to, and including, 2.10.6 The vulnerability exists because `IntegrationHandler::executeWithCapture()` stores raw, attacker-controlled field values — including `user_pass` and `user_email` — verbatim into `wp_btcbi_log.field_data` on anonymous front-end requests with no capability check, and `LogHandler::reexecute()` feeds that stored payload back through `Flow::execute()` inside the replaying administrator's session without validating the identity that originally produced the data, causing `RegistrationController::updateUser()` to resolve the target user ID to the administrator and write the attacker-supplied password via `wp_update_user()`. This makes it possible for unauthenticated attackers to overwrite the administrator's password and fully take over the administrator account. Exploitation requires that an administrator has configured a flow mapping a user-supplied form field to the `user_pass` parameter of the WP User Registration "Update User" action, and that the administrator subsequently clicks "Re-execute" on the failure log row produced by the anonymous submission from the plugin's log screen. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc: Do not restore KUAP in arch_exit_to_user_mode_prepare()
KUAP means kernel cannot touch user memory unless it explicitly is
enabled. In the kernel it should stay AMR_KUAP_BLOCKED. While returning
to userspace just before RFI, kernel should restore the user AMR value
back.
Looks like GENERIC_ENTRY might be treating arch_exit_to_user_mode_prepare()
as the last architecture step before returning to userspace.
commit bee25f97ad24 ("powerpc: Enable GENERIC_ENTRY feature")
therefore called kuap_user_restore() from that hook. But on PowerPC that
is too early. After irqentry_exit() / syscall_exit_to_user_mode() we
still run platform specific exit routines.
e.g. code snippets showing both exception handling and system call
handling as the callers of function arch_exit_to_user_mode_prepare()
which does kuap_user_restore(). The below path shows that calling
kuap_user_restore() is too early when called from
arch_exit_to_user_mode_prepare().
Exception handling in exceptions-64s.S
=======================================
bl CFUNC(do_page_fault)
..DEFINE_INTERRUPT_HANDLER_ASYNC(do_page_fault)
arch_interrupt_async_enter_prepare(regs);
state = irqentry_enter(regs);
instrumentation_begin();
irq_enter_rcu();
handler(regs);
nap_adjust_return(regs);
irq_exit_rcu();
instrumentation_end();
arch_interrupt_async_exit_prepare(regs);
irqentry_exit(regs, state); <<< too early
irqentry_exit_to_user_mode()
__exit_to_user_mode_prepare(regs, EXIT_TO_USER_MODE_WORK_IRQ);
arch_exit_to_user_mode_prepare(regs, ti_work); <<< too early
b interrupt_return_srr
.. bl CFUNC(interrupt_exit_user_prepare) <<< already calls kuap_user_restore
prep_irq_for_enabled_exit() retry can run kernel code with IRQs on. So
only when that routine is fully finished is when the user KUAP should be
fully restored which interrupt_exit_user_prepare() already takes care of
before returning.
Similarly for system call handling in interrupt_64.S
======================================================
bl CFUNC(system_call_exception)
.Lsyscall_exit:
addi r4,r1,STACK_INT_FRAME_REGS
li r5,0 /* !scv */
bl CFUNC(syscall_exit_prepare)
.. kuap_assert_locked();
syscall_exit_to_user_mode(regs); <<< too early
syscall_exit_to_user_mode_prepare(regs); <<< too early
kuap_user_restore(regs); <<< already calls
syscall_exit_prepare(), which can enable IRQs, replay a pending
interrupt, and only then rfi. Those functions already restore KUAP
immediately before rfi.
Note that if we restore the user AMR too early like in the current code
as shown from the code snippets above, then we get the following warning
when CONFIG_PPC_KUAP_DEBUG is enabled:
WARNING: arch/powerpc/include/asm/book3s/64/kup.h:293 at interrupt_exit_user_prepare+0x1a0/0x1c0
Hardware name: IBM pSeries (emulated by qemu) POWER10 (architected)
TRAP: 0700
LR: c00000000000d8d4 CTR: c0000000021fe500
MSR: <SF,EE,ME,IR,DR,RI,LE> CR: 44000804 XER: 20040000
interrupt_exit_user_prepare+0x1a0/0x1c0
interrupt_return_srr_user+0x8/0x12c |
| Grav grav-plugin-api before 1.0.36 contains a privilege escalation vulnerability that allows delegated user managers to obtain super-admin access by storing positive scalar admin or api parent grants. Attackers with api.users.write can edit account access maps or invitations so the inheriting permission resolver satisfies requireSuper checks, accessing super-only API endpoints. |
| In the Linux kernel, the following vulnerability has been resolved:
ptrace: slightly saner 'get_dumpable()' logic
The 'dumpability' of a task is fundamentally about the memory image of
the task - the concept comes from whether it can core dump or not - and
makes no sense when you don't have an associated mm.
And almost all users do in fact use it only for the case where the task
has a mm pointer.
But we have one odd special case: ptrace_may_access() uses 'dumpable' to
check various other things entirely independently of the MM (typically
explicitly using flags like PTRACE_MODE_READ_FSCREDS). Including for
threads that no longer have a VM (and maybe never did, like most kernel
threads).
It's not what this flag was designed for, but it is what it is.
The ptrace code does check that the uid/gid matches, so you do have to
be uid-0 to see kernel thread details, but this means that the
traditional "drop capabilities" model doesn't make any difference for
this all.
Make it all make a *bit* more sense by saying that if you don't have a
MM pointer, we'll use a cached "last dumpability" flag if the thread
ever had a MM (it will be zero for kernel threads since it is never
set), and require a proper CAP_SYS_PTRACE capability to override. |
| IBM i 7.3, 7.4, 7.5, and 7.6 could allow a local attacker to modify the BOOTP table due to improper authorization. |
| systemd before 247 does not adequately block local privilege escalation for some Sudo configurations, e.g., plausible sudoers files in which the "systemctl status" command may be executed. Specifically, systemd does not set LESSSECURE to 1, and thus other programs may be launched from the less program. This presents a substantial security risk when running systemctl from Sudo, because less executes as root when the terminal size is too small to show the complete systemctl output. |
| The macOS version of the DigiD app is not signed with Hardened Runtime. As a result, a local process can load its own dylib into DigiD via DYLD_INSERT_LIBRARIES. An attacker with local user-level code execution can execute arbitrary code within the macOS version of the DigiD app, thereby gaining access to DigiD data and cryptographic capabilities that the process normally does not have. Reported by Kun Peeks (@SwayZGl1tZyyy) |
