| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: check if root is readonly when setting posix acl
For a filesystem which has btrfs read-only property set to true, all
write operations including acl and xattr should be denied. However, acl
can still be set even if btrfs ro property is true.
This happens because no function on the set_acl code path checks the root
is readonly or not. It was checked in btrfs_setxattr_trans() but got
removed in commit 353c2ea735e4 ("btrfs: remove redundant readonly root
check in btrfs_setxattr_trans")
That commit didn't check if all the callers properly check the root's
read-only flag. A previous fix is commit b51111271b03 ("btrfs: check if
root is readonly while setting security xattr").
Always check if the root is read-only before performing the set acl
operation. |
| In the Linux kernel, the following vulnerability has been resolved:
cachefiles: Fix error return when vfs_mkdir() fails
When vfs_mkdir() fails, the error code is not extracted from the
returned error pointer. This causes mkdir_error to be reached with
ret=0, which leads to returning ERR_PTR(0) (NULL) instead of a
proper error pointer.
Fix this by extracting the error code from the error pointer when
vfs_mkdir() fails. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: ctxfi: Check the error for index mapping
The ctxfi driver blindly assumed a proper value returned from
daio_device_index(), but it's not always true. Add a proper error
check to deal with the error from the function. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/crypto: Fix skcipher_walk return code handling in aes_s390
The return codes from skcipher_walk_virt() were not properly checked
before entering the processing loops in ecb_aes_crypt() and ctr_aes_crypt().
If skcipher_walk_virt() fails, the walk structure may be in an undefined
state, and attempting to process data could lead to incorrect behavior
or accessing uninitialized memory.
Add proper return code checking to ensure correct handling of the walk
initialization and walk advance and eventually return to the caller
with that return code. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: undo netns switch if renaming the wiphy fails
Once all the interfaces have been moved, cfg80211_switch_netns()
moves the wiphy itself by setting its network namespace and then
renaming it, which makes sysfs move it. The rename can fail (but
only on allocation failures), leaving things mixed up and hitting
the warning there.
Ignoring it isn't great, undo the move and let the change fail
in this case. If undo fails then WARN, then things would again
be stuck in two different network namespaces. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: reject undecryptable rxkad response tickets
rxkad_decrypt_ticket() decrypts the RXKAD response ticket and then
parses the buffer as plaintext without checking whether
crypto_skcipher_decrypt() succeeded.
A malformed RESPONSE can therefore use a non-block-aligned ticket
length, make the decrypt operation fail, and still drive the ticket
parser with attacker-controlled bytes.
Check the decrypt result and abort the connection with RXKADBADTICKET
when ticket decryption fails. |
| In the Linux kernel, the following vulnerability has been resolved:
block: don't revert iter for -EIOCBQUEUED
blkdev_read_iter() has a few odd checks, like gating the position and
count adjustment on whether or not the result is bigger-than-or-equal to
zero (where bigger than makes more sense), and not checking the return
value of blkdev_direct_IO() before doing an iov_iter_revert(). The
latter can lead to attempting to revert with a negative value, which
when passed to iov_iter_revert() as an unsigned value will lead to
throwing a WARN_ON() because unroll is bigger than MAX_RW_COUNT.
Be sane and don't revert for -EIOCBQUEUED, like what is done in other
spots. |
| A flaw was found in Python, specifically in the FTP (File Transfer Protocol) client library in PASV (passive) mode. The issue is how the FTP client trusts the host from the PASV response by default. This flaw allows an attacker to set up a malicious FTP server that can trick FTP clients into connecting back to a given IP address and port. This vulnerability could lead to FTP client scanning ports, which otherwise would not have been possible. |
| A flaw was found in glibc. The realpath() function can mistakenly return an unexpected value, potentially leading to information leakage and disclosure of sensitive data. |
| Libreswan has a null pointer dereference bug in the PKCS#7 handling code for IKE certificate authentication. When libreswan decodes an IKE CERT payload of type CERT_PKCS7_WRAPPED_X509, it guards the PKCS#7 blob with SEC_PKCS7ContainsCertsOrCrls() and then iterates the certificate list with SEC_PKCS7GetCertificateList(). The two NSS APIs disagree on a SignedData that carries a CRL but no certificates: ContainsCertsOrCrls() returns PR_TRUE (there is a CRL), so the guard passes, but GetCertificateList() returns NULL (there are no certificates). This causes libreswan to dereference a null pointer leading to a crash and restart. A malicious IKE_AUTH packet can trigger this bug, meaning the peer does not need to be authenticated. No remote code execution is possible. Continued exploitation can cause a denial of service. |
| The BSON encoder in the MongoDB PHP Driver does not check some return values after a document exceeds libbson's size limit. This can leave the encoder in an invalid state. An unauthenticated actor who can cause an affected application to encode an unusually large data structure can terminate the PHP worker or cause the resulting document to omit fields. No MongoDB server connection or database authentication is required. |
| RIOT is an open-source microcontroller operating system designed for Internet of Things devices and other embedded systems. From version 2023.07 through version 2026.07, nanocoap_fileserver callers in sys/net/application_layer/nanocoap/fileserver.c ignore a failure returned by _resp_init() when coap_build_reply() cannot fit a response header into the response buffer. A remote client can send a CoAP request with a sufficiently large extended token when nanocoap_token_ext is enabled, causing response initialization to fail while _get_file() or _get_directory() continues with stale response state. The path then reaches _calc_szx2() and its pdu->payload_len > reserve assertion, terminating the affected service or device task. No fixed release is available as of this review. |
| Crux Agent from 1.9.0 before 2.0.3 uses the full SKA bilocation key as the WireGuard preshared key. When a peering session negotiates use of SHA-512, the key produced is 64 bytes instead of the 32 bytes WireGuard requires. The agent does not validate this size; instead it attempts to use the `wg set` command to update the live tunnel, and write the invalid key to the WireGuard configuration file. The update fails, so the live tunnel keeps using its previous preshared key until the tunnel is shut down. The tunnel will fail to start when restarted.
For a peer which has never successfully negotiated a 32-byte bilocation key in a Crux C2 organization which has the "Enforce SKA Use" setting turned off, no preshared key will be set for the tunnel. Therefore, an attacker who is able to intercept and store the peer's traffic, and has access (or will have access) to a cryptographically relevant quantum computer, will be able to decrypt the tunnel. |
| In the Linux kernel, the following vulnerability has been resolved:
9p: Fix v9fs_issue_write() to update i_size and remote_i_size
Fix v9fs_issue_write() to update i_size and remote_i_size to the new size
of the server file if we made it larger, using the start fpos and the count
returned by p9_client_write() to calculate the new minimum file size.
This assumes that if the 9P server makes a short write (say it hits
ENOSPC), a reduced count is returned. |
| An exploitable denial-of-service vulnerability exists in the message-parsing functionality of Videolabs libmicrodns 0.1.0. When parsing mDNS messages in mdns_recv, the return value of the mdns_read_header function is not checked, leading to an uninitialized variable usage that eventually results in a null pointer dereference, leading to service crash. An attacker can send a series of mDNS messages to trigger this vulnerability. |
| In libarchive before 3.6.2, the software does not check for an error after calling calloc function that can return with a NULL pointer if the function fails, which leads to a resultant NULL pointer dereference. NOTE: the discoverer cites this CWE-476 remark but third parties dispute the code-execution impact: "In rare circumstances, when NULL is equivalent to the 0x0 memory address and privileged code can access it, then writing or reading memory is possible, which may lead to code execution." |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: leave HasEA flag untouched on setxattr failure
In ntfs_set_ea(), the exit path unconditionally updates the HasEA
flag based on ea_info_qsize. When an error occurs before
ea_info_qsize is updated, NInoClearHasEA() hides existing on-disk
EAs until the inode is evicted.
Only update the flag on success. |
| RabbitMQ is a messaging and streaming broker. From 3.13.0 until 4.3.3, 4.2.9, 4.1.14, 4.0.23, and 3.13.18, JWKS Fetch Ignores HTTP Response Status Code - Signing Key Destruction Causes Authentication DoS (CWE-252). the JWKS key fetching mechanism in uaajwt.erl does not validate the HTTP response status code when downloading signing keys from the OAuth2 provider's JWKS endpoint. Non-200 responses (including 4xx and 5xx errors) are processed identically to successful responses. When the JWKS endpoint returns an error response with a valid-JSON body that lacks a keys field, all previously cached signing keys are destroyed, causing a persistent authentication denial of Files: deps/rabbitmqauthbackendoauth2/src/uaajwt.erl, lines 50-63 deps/rabbitmqauthbackendoauth2/src/uaajwks.erl, lines 5-7 deps/rabbitmqauthbackendoauth2/src/rabbitoauth2provider.erl, lines 98-107 Bug 1: HTTP status code ignored (uaajwt.erl:50-63): The Erlang httpc module returns {ok, {{HttpVersion, StatusCode, ReasonPhrase}, Headers, Body}}. The pattern {ok, {, , JwksBody}} matches ANY successful HTTP transaction Persistent authentication DoS: Once keys are destroyed, ALL OAuth2/JWT authentication fails for all users until a new successful JWKS refresh occurs Amplification: A single attacker can deny access to all legitimate OAuth2 users across the entire RabbitMQ. This issue is fixed in versions 4.3.3, 4.2.9, 4.1.14, 4.0.23, and 3.13.18. |
| A flaw was found in olm-operator-konflux-sample. The `bundle-hack/update_bundle.sh` script lacks mechanisms to stop execution immediately upon encountering an error. This oversight allows critical data processing steps, such as those involving `skopeo` or `jq` commands, to fail silently and proceed with outdated or incomplete information. Consequently, this could lead to data integrity issues within the system. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Propagate RX ring init failures in bnxt_init_nic()
bnxt_init_rx_rings() returns an error when bnxt_alloc_one_rx_ring()
fails, but bnxt_init_nic() discards that return value and calls
bnxt_init_chip(), which enables TPA.
If an allocation fails, this could leave rxr->rx_tpa[] partially zeroed
and TPA would be enabled over an array with zeroed entries. This would
lead to a zeroed DMA address being handed out if the agg_idx is
translated to a SW index at a zeroed entry.
Fix this by propagating the error out of bnxt_init_nic(). Both callers
already check its return value and unwind with bnxt_free_skbs() and
bnxt_free_mem(), which tolerate a partially initialized RX ring. |
