| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A weakness has been identified in agno-agi agno up to 3.0.6/3.1.1. This issue affects the function member_agent.run in the library libs/agno/agno/team/_default_tools.py of the component Delegation Feature. Executing a manipulation can lead to execution with unnecessary privileges. The attack can be executed remotely. The exploit has been made available to the public and could be used for attacks. The pull request to fix this issue awaits acceptance. |
| A security flaw has been discovered in FunnyWolf Viper up to 3.1.11. The affected element is an unknown function of the file /root/viper/.git/config. Performing a manipulation results in hard-coded credentials. Remote exploitation of the attack is possible. The exploit has been released to the public and may be used for attacks. |
| WebCTI service for Slican IPx telephone exchanges stores temporary subscriber password in plaintext. An attacker with access to the database can obtain the user's password and log in to the subscriber's account.
This issue was fixed in IPx series version 6.62.0100. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: check if root is readonly when setting posix acl
For a filesystem which has btrfs read-only property set to true, all
write operations including acl and xattr should be denied. However, acl
can still be set even if btrfs ro property is true.
This happens because no function on the set_acl code path checks the root
is readonly or not. It was checked in btrfs_setxattr_trans() but got
removed in commit 353c2ea735e4 ("btrfs: remove redundant readonly root
check in btrfs_setxattr_trans")
That commit didn't check if all the callers properly check the root's
read-only flag. A previous fix is commit b51111271b03 ("btrfs: check if
root is readonly while setting security xattr").
Always check if the root is read-only before performing the set acl
operation. |
| In the Linux kernel, the following vulnerability has been resolved:
fs,fsverity: remove check for fsverity being enabled in setattr_prepare()
The check that fs-verity is available in the kernel is not necessary
here. Filesystems could have fsverity files even without fs-verity
enabled. In that case, truncate on fsverity file will succeed, what this
check is trying to prevent. |
| In the Linux kernel, the following vulnerability has been resolved:
cachefiles: Fix error return when vfs_mkdir() fails
When vfs_mkdir() fails, the error code is not extracted from the
returned error pointer. This causes mkdir_error to be reached with
ret=0, which leads to returning ERR_PTR(0) (NULL) instead of a
proper error pointer.
Fix this by extracting the error code from the error pointer when
vfs_mkdir() fails. |
| In the Linux kernel, the following vulnerability has been resolved:
net: phonet: do not BUG_ON() in pn_socket_autobind() on failed bind
syzbot reported a kernel BUG triggered from pn_socket_sendmsg() via
pn_socket_autobind():
kernel BUG at net/phonet/socket.c:213!
RIP: 0010:pn_socket_autobind net/phonet/socket.c:213 [inline]
RIP: 0010:pn_socket_sendmsg+0x240/0x250 net/phonet/socket.c:421
Call Trace:
sock_sendmsg_nosec+0x112/0x150 net/socket.c:797
__sock_sendmsg net/socket.c:812 [inline]
__sys_sendto+0x402/0x590 net/socket.c:2280
...
pn_socket_autobind() calls pn_socket_bind() with port 0 and, on
-EINVAL, assumes the socket was already bound and asserts that the
port is non-zero:
err = pn_socket_bind(sock, ..., sizeof(struct sockaddr_pn));
if (err != -EINVAL)
return err;
BUG_ON(!pn_port(pn_sk(sock->sk)->sobject));
return 0; /* socket was already bound */
However pn_socket_bind() also returns -EINVAL when sk->sk_state is not
TCP_CLOSE, even when the socket has never been bound and pn_port() is
still 0. In that case the BUG_ON() fires and panics the kernel from a
user-triggerable path.
Treat the "bind returned -EINVAL but pn_port() is still 0" case as a
regular error and propagate -EINVAL to the caller instead of crashing.
Existing callers already translate a non-zero return from
pn_socket_autobind() into -ENOBUFS/-EAGAIN, so returning -EINVAL here
only changes behaviour from panic to a normal errno. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: ctxfi: Check the error for index mapping
The ctxfi driver blindly assumed a proper value returned from
daio_device_index(), but it's not always true. Add a proper error
check to deal with the error from the function. |
| The insights-runtime-extractor runs as a privileged DaemonSet (`hostPID: true`)
that scans container processes for runtime fingerprinting. When scanning a
container, the coordinator:
1. **fork()s** a child process
2. **setns()** into the target container's PID and mount namespaces
3. **fchdir()** back to an orphaned FD pointing at the extractor's own root
filesystem (where `/crio.sock` is hostPath-mounted)
4. Calls **only `seteuid(target_uid)`** — changing the effective UID but leaving
the **real UID and saved-set-UID at 0** and **retaining the permitted
capability set**
5. The `check_no_privileged_perms()` guard inspects only the Effective capability
set (so it passes), and is **skipped entirely when the target runs as uid 0**
6. The `VersionExecutable` fingerprint invokes `fpr_kind_executable` with
`process.command_line[0]` — the target's argv[0], read from
`/proc/<pid>/cmdline` and **fully controlled by the workload**
7. `fpr_kind_executable` calls `exec.Command(executable, "--version").Output()`
— executing the **workload's own binary** inside the workload's mount
namespace while **ruid=0 in the host user namespace**
The executed process can call `setuid(0)` to restore full root with
`CAP_SYS_ADMIN`, and inherits the orphaned cwd which resolves into the extractor
container's filesystem containing the host CRI-O socket.
## Affected Code
### 1. Insufficient privilege drop (Rust — extractor coordinator)
**File:** `extractor/src/insights_runtime_extractor.rs`
```rust
// Lines 139-146 — seteuid-only drop, guard skipped for root containers
join_process_namespaces(process.pid)?;
change_dir(current_dir);
switch_user(*process.uid)?;
if *process.uid != 0 {
perms::check_no_privileged_perms()
.expect("Must not have privileged permissions to run fingerprints");
}
fingerprint::run_fingerprints(&config, out_dir, &process);
```
```rust
// Lines 182-185 — only effective UID changed; ruid/suid stay 0
fn switch_user(uid: u32) -> Result<(), ScannerError> {
debug!("... Becoming user: {uid}");
seteuid(uid.into()).map_err(|e| ScannerError::Errno(e))
}
```
### 2. Execution of untrusted binary (Go — fingerprint)
**File:** `fingerprints/pkg/utils/file.go`
```go
// Lines 75-80 — executes a path taken verbatim from workload's argv[0]
func GetExecutableVersionOutput(executable string) (string, error) {
out, err := exec.Command(executable, "--version").Output()
if err != nil {
return "", err
}
return string(out), nil
}
```
### 3. Workload-controlled path forwarded (Rust — version_executable)
**File:** `version_executable.rs`
```rust
// Lines 29-34 — workload-controlled command_line[0] forwarded to fingerprint
return Some(vec![
fpr_kind_executable,
out_dir.to_string(),
String::from(&process.command_line[0]),
String::from(&version_executable.runtime_kind_name),
]);
```
## Attack Pattern
**Attacker:** Any tenant able to schedule a pod (unprivileged, any namespace)
**Victim:** The node running the insights-runtime-extractor DaemonSet
**Trigger:** Automatic — the DaemonSet scans all container processes on the node
**Attack sequence:**
1. Attacker creates a pod whose process name matches a configured
versioned-executable pattern (`node`, `python`, `python3`, `MainThread`,
or contains `java`)
2. The pod's main binary (at the path matching argv[0]) is a malicious
executable that calls `setuid(0)` to restore root
3. When the insights operator triggers a scan, the DaemonSet forks, enters the
attacker's mount namespace, and executes the attacker's binary with ruid=0
4. The attacker's code regains full root with `CAP_SYS_ADMIN` in the host user
namespace
5. The inherited cwd contains the host CRI-O socket → full node compromise |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: undo netns switch if renaming the wiphy fails
Once all the interfaces have been moved, cfg80211_switch_netns()
moves the wiphy itself by setting its network namespace and then
renaming it, which makes sysfs move it. The rename can fail (but
only on allocation failures), leaving things mixed up and hitting
the warning there.
Ignoring it isn't great, undo the move and let the change fail
in this case. If undo fails then WARN, then things would again
be stuck in two different network namespaces. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: icmp: fix null-ptr-deref in icmp_build_probe()
ipv6_stub->ipv6_dev_find() may return ERR_PTR(-EAFNOSUPPORT) when the
IPv6 stack is not active (CONFIG_IPV6=m and not loaded), and passing
this error pointer to dev_hold() will cause a kernel crash with
null-ptr-deref.
Instead, silently discard the request. RFC 8335 does not appear to
define a specific response for the case where an IPv6 interface
identifier is syntactically valid but the implementation cannot perform
the lookup at runtime, and silently dropping the request may safer than
misreporting "No Such Interface". |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: reject undecryptable rxkad response tickets
rxkad_decrypt_ticket() decrypts the RXKAD response ticket and then
parses the buffer as plaintext without checking whether
crypto_skcipher_decrypt() succeeded.
A malformed RESPONSE can therefore use a non-block-aligned ticket
length, make the decrypt operation fail, and still drive the ticket
parser with attacker-controlled bytes.
Check the decrypt result and abort the connection with RXKADBADTICKET
when ticket decryption fails. |
| In the Linux kernel, the following vulnerability has been resolved:
udp: Fix wildcard bind conflict check when using hash2
When binding a udp_sock to a local address and port, UDP uses
two hashes (udptable->hash and udptable->hash2) for collision
detection. The current code switches to "hash2" when
hslot->count > 10.
"hash2" is keyed by local address and local port.
"hash" is keyed by local port only.
The issue can be shown in the following bind sequence (pseudo code):
bind(fd1, "[fd00::1]:8888")
bind(fd2, "[fd00::2]:8888")
bind(fd3, "[fd00::3]:8888")
bind(fd4, "[fd00::4]:8888")
bind(fd5, "[fd00::5]:8888")
bind(fd6, "[fd00::6]:8888")
bind(fd7, "[fd00::7]:8888")
bind(fd8, "[fd00::8]:8888")
bind(fd9, "[fd00::9]:8888")
bind(fd10, "[fd00::10]:8888")
/* Correctly return -EADDRINUSE because "hash" is used
* instead of "hash2". udp_lib_lport_inuse() detects the
* conflict.
*/
bind(fail_fd, "[::]:8888")
/* After one more socket is bound to "[fd00::11]:8888",
* hslot->count exceeds 10 and "hash2" is used instead.
*/
bind(fd11, "[fd00::11]:8888")
bind(fail_fd, "[::]:8888") /* succeeds unexpectedly */
The same issue applies to the IPv4 wildcard address "0.0.0.0"
and the IPv4-mapped wildcard address "::ffff:0.0.0.0". For
example, if there are existing sockets bound to
"192.168.1.[1-11]:8888", then binding "0.0.0.0:8888" or
"[::ffff:0.0.0.0]:8888" can also miss the conflict when
hslot->count > 10.
TCP inet_csk_get_port() already has the correct check in
inet_use_bhash2_on_bind(). Rename it to
inet_use_hash2_on_bind() and move it to inet_hashtables.h
so udp.c can reuse it in this fix. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: dell-wmi-sysman: Don't hex dump plaintext password data
set_new_password() hex dumps the entire buffer, which contains plaintext
password data, including current and new passwords. Remove the hex dump
to avoid leaking credentials. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: Don't log plaintext credentials in cifs_set_cifscreds
When debug logging is enabled, cifs_set_cifscreds() logs the key
payload and exposes the plaintext username and password. Remove the
debug log to avoid exposing credentials. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Forget ranges when refining tnum after JSET
Syzbot reported a kernel warning due to a range invariant violation on
the following BPF program.
0: call bpf_get_netns_cookie
1: if r0 == 0 goto <exit>
2: if r0 & Oxffffffff goto <exit>
The issue is on the path where we fall through both jumps.
That path is unreachable at runtime: after insn 1, we know r0 != 0, but
with the sign extension on the jset, we would only fallthrough insn 2
if r0 == 0. Unfortunately, is_branch_taken() isn't currently able to
figure this out, so the verifier walks all branches. The verifier then
refines the register bounds using the second condition and we end
up with inconsistent bounds on this unreachable path:
1: if r0 == 0 goto <exit>
r0: u64=[0x1, 0xffffffffffffffff] var_off=(0, 0xffffffffffffffff)
2: if r0 & 0xffffffff goto <exit>
r0 before reg_bounds_sync: u64=[0x1, 0xffffffffffffffff] var_off=(0, 0)
r0 after reg_bounds_sync: u64=[0x1, 0] var_off=(0, 0)
Improving the range refinement for JSET to cover all cases is tricky. We
also don't expect many users to rely on JSET given LLVM doesn't generate
those instructions. So instead of improving the range refinement for
JSETs, Eduard suggested we forget the ranges whenever we're narrowing
tnums after a JSET. This patch implements that approach. |
| In the Linux kernel, the following vulnerability has been resolved:
block: don't revert iter for -EIOCBQUEUED
blkdev_read_iter() has a few odd checks, like gating the position and
count adjustment on whether or not the result is bigger-than-or-equal to
zero (where bigger than makes more sense), and not checking the return
value of blkdev_direct_IO() before doing an iov_iter_revert(). The
latter can lead to attempting to revert with a negative value, which
when passed to iov_iter_revert() as an unsigned value will lead to
throwing a WARN_ON() because unroll is bigger than MAX_RW_COUNT.
Be sane and don't revert for -EIOCBQUEUED, like what is done in other
spots. |
| A flaw was found in OpenSSH. On platforms that cannot pass file descriptors and that need root to allocate a terminal, the post-authentication session process keeps root privilege. An authenticated user can then perform actions as root, including privileged socket connections and binding forwards to low-numbered ports. |
| A security flaw has been discovered in cemtan sar2html 4.0.0. Affected by this vulnerability is an unknown functionality of the file sar2html.py. The manipulation of the argument SECRET_KEY results in hard-coded credentials. The attack can be executed remotely. The project was informed of the problem early through an issue report but has not responded yet. |
| Privilege elevation in Installer in Google Chrome on on Windows prior to 155.0.8059.79 allowed a local attacker to obtain sensitive information via a local program. (Chromium security severity: High) |
