| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Godot Engine through 4.7.2 has an out-of-bounds read in the optimized translation loader (core/string/optimized_translation.cpp, OptimizedTranslation::get_message). Offsets read from the hash table of a crafted .translation resource are used as indices into the bucket table without bounds validation; only a single sentinel value is rejected. A crafted file can point an index far past the allocated buffer. Depending on the values, the result is a crash, or a string lookup (tr()) returns raw bytes from elsewhere in the process heap as the translated string, disclosing process memory. The defect is reached when the product or an exported game loads and performs lookups in a crafted translation file. NOTE: the Supplier's position is that the research has identified "no security issues" because the required attacker access is outside of the current Godot Engine threat model. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: validate extension-frame layout before RX
Extension frames only have the extension header at the regular 802.11
header offset. The generic RX path can still reach helpers and interface
dispatch code that read regular header address fields before unsupported
extension subtypes are dropped.
mac80211 currently only handles S1G beacon extension frames. Drop other
extension subtypes before they can reach regular-header RX processing.
For S1G beacons, linearize the SKB with the management-frame path and
require the fixed S1G beacon header, including optional fixed fields
indicated by frame control, before generic RX dispatch.
Route S1G beacons through the station/default-link RX path without
regular-header station lookup. Avoid regular-header address reads in the
mac80211 RX paths that process S1G extension beacons, including
accept-frame, duplicate-detection, address-copy, and MLO
address-translation paths.
Also make ieee80211_get_bssid() length-safe before returning the S1G
source-address pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
net/802/mrp: fix vector attribute parsing in mrp_pdu_parse_vecattr
In mrp_pdu_parse_vecattr(), vector attribute events are encoded three
per byte and valen tracks the number of events left to process.
The parser decrements valen after processing the first and second events
from each event byte, but not after processing the third one. When valen
is exactly a multiple of three, the loop continues after the last valid
event and consumes the next byte as a new event byte, applying a
spurious event to the MRP applicant state.
Additionally, when valen is zero the parser unconditionally consumes
attrlen bytes as FirstValue and advances the offset, even though per
IEEE 802.1ak a VectorAttribute with only a LeaveAllEvent has valen of
zero and no FirstValue or Vector fields. This corrupts the offset for
subsequent PDU parsing.
Also, when valen exceeds three the loop crosses byte boundaries but
the attribute value is not incremented between the last event of one
byte and the first event of the next. This causes the first event of
the next byte to use the same attribute value as the third event
rather than the next consecutive value.
Decrement valen after processing the third event, skip FirstValue
consumption when valen is zero, and increment the attribute value at
the end of each loop iteration. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: b43legacy: enforce bounds check on firmware key index in RX path
Same fix as b43: the firmware-controlled key index in b43legacy_rx()
can exceed dev->max_nr_keys. The existing B43legacy_WARN_ON is
non-enforcing in production builds, allowing an out-of-bounds read of
dev->key[].
Make the check enforcing by dropping the frame for invalid indices. |
| In the Linux kernel, the following vulnerability has been resolved:
isofs: validate block number from NFS file handle in isofs_export_iget
isofs_fh_to_dentry() and isofs_fh_to_parent() pass an attacker-
controlled block number (ifid->block or ifid->parent_block) from
the NFS file handle to isofs_export_iget(), which only rejects
block == 0 before calling isofs_iget() and ultimately sb_bread().
A crafted file handle with fh_len sufficient to pass the check
added by commit 0405d4b63d08 ("isofs: Prevent the use of too small
fid") can still drive the server to read any in-range block on the
backing device as if it were an iso_directory_record. That earlier
fix was assigned CVE-2025-37780.
sb_bread() on an out-of-range block returns NULL cleanly via the
EIO path, so there is no memory-safety violation. For in-range
reads of adjacent-partition data on the same block device, the
unrelated bytes end up in iso_inode_info fields that reach the NFS
client as dentry metadata. The deployment surface (isofs exported
over NFS from loop-mounted images) is narrow and requires an
authenticated NFS peer, but the malformed-file-handle class is
reportable as hardening next to the existing CVE-2025-37780 fix.
Reject block >= ISOFS_SB(sb)->s_nzones in isofs_export_iget() so
the check covers both isofs_fh_to_dentry() and isofs_fh_to_parent()
call sites with a single line. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: icmp: validate reply type before using icmp_pointers
Extended echo replies use ICMP_EXT_ECHOREPLY as the outbound reply type.
That value is outside the range covered by icmp_pointers[], which only
describes the traditional ICMP types up to NR_ICMP_TYPES.
Avoid consulting icmp_pointers[] for reply types outside that range, and
use array_index_nospec() for the remaining in-range lookup. Normal ICMP
replies keep their existing behavior unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
misc: ibmasm: fix OOB MMIO read in ibmasm_handle_mouse_interrupt()
ibmasm_handle_mouse_interrupt() performs an out-of-bounds MMIO read
when the queue reader or writer index from hardware exceeds
REMOTE_QUEUE_SIZE (60).
A compromised service processor can trigger this by writing an
out-of-range value to the reader or writer MMIO register before
asserting an interrupt. Since writer is re-read from hardware on
every loop iteration, it can also be set to an out-of-range value
after the loop has already started.
The root cause is that get_queue_reader() and get_queue_writer() return
raw readl() values that are passed directly into get_queue_entry(),
which computes:
queue_begin + reader * sizeof(struct remote_input)
with no bounds check. This unchecked MMIO address is then passed to
memcpy_fromio(), reading 8 bytes from unintended device registers.
For sufficiently large values the address falls outside the PCI BAR
mapping entirely, triggering a machine check exception.
Fix by checking both indices against REMOTE_QUEUE_SIZE at the top of
the loop body, before any call to get_queue_entry(). On an out-of-range
value, reset the reader register to 0 via set_queue_reader() before
breaking, so that normal queue operation can resume if the corrupted
hardware state is transient. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: validate bsscfg indices in IF events
brcmf_fweh_handle_if_event() validates the firmware-provided interface
index before it touches drvr->iflist[], but it still uses the raw
bsscfgidx field as an array index without a matching range check.
Reject IF events whose bsscfg index does not fit in drvr->iflist[]
before indexing the interface array.
[add missing wifi prefix] |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: xt_multiport: validate range encoding in checkentry
ports_match_v1() treats any non-zero pflags entry as the start of a
port range and unconditionally consumes the next ports[] element as
the range end.
The checkentry path currently validates protocol, flags and count, but
it does not validate the range encoding itself. As a result, malformed
rules can mark the last slot as a range start or place two range starts
back to back, leaving ports_match_v1() to step past the last valid
ports[] element while interpreting the rule.
Reject malformed multiport v1 rules in checkentry by validating that
each range start has a following element and that the following element
is not itself marked as another range start. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: require 3 sub-authorities before reading sub_auth[2]
parse_dacl() compares each ACE SID against sid_unix_NFS_mode and on
match reads sid.sub_auth[2] as the file mode. If sid_unix_NFS_mode is
the prefix S-1-5-88-3 with num_subauth = 2 then compare_sids() compares
only min(num_subauth, 2) sub-authorities so a client SID with
num_subauth = 2 and sub_auth = {88, 3} will match.
If num_subauth = 2 and the ACE is placed at the very end of the security
descriptor, sub_auth[2] will be 4 bytes past end_of_acl. The
out-of-band bytes will then be masked to the low 9 bits and applied as
the file's POSIX mode, probably not something that is good to have
happen.
Fix this up by forcing the SID to actually carry a third sub-authority
before reading it at all. |
| In the Linux kernel, the following vulnerability has been resolved:
module: Fix kernel panic when a symbol st_shndx is out of bounds
The module loader doesn't check for bounds of the ELF section index in
simplify_symbols():
for (i = 1; i < symsec->sh_size / sizeof(Elf_Sym); i++) {
const char *name = info->strtab + sym[i].st_name;
switch (sym[i].st_shndx) {
case SHN_COMMON:
[...]
default:
/* Divert to percpu allocation if a percpu var. */
if (sym[i].st_shndx == info->index.pcpu)
secbase = (unsigned long)mod_percpu(mod);
else
/** HERE --> **/ secbase = info->sechdrs[sym[i].st_shndx].sh_addr;
sym[i].st_value += secbase;
break;
}
}
A symbol with an out-of-bounds st_shndx value, for example 0xffff
(known as SHN_XINDEX or SHN_HIRESERVE), may cause a kernel panic:
BUG: unable to handle page fault for address: ...
RIP: 0010:simplify_symbols+0x2b2/0x480
...
Kernel panic - not syncing: Fatal exception
This can happen when module ELF is legitimately using SHN_XINDEX or
when it is corrupted.
Add a bounds check in simplify_symbols() to validate that st_shndx is
within the valid range before using it.
This issue was discovered due to a bug in llvm-objcopy, see relevant
discussion for details [1].
[1] https://lore.kernel.org/linux-modules/20251224005752.201911-1-ihor.solodrai@linux.dev/ |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: validate p_idx bounds in ext4_ext_correct_indexes
ext4_ext_correct_indexes() walks up the extent tree correcting
index entries when the first extent in a leaf is modified. Before
accessing path[k].p_idx->ei_block, there is no validation that
p_idx falls within the valid range of index entries for that
level.
If the on-disk extent header contains a corrupted or crafted
eh_entries value, p_idx can point past the end of the allocated
buffer, causing a slab-out-of-bounds read.
Fix this by validating path[k].p_idx against EXT_LAST_INDEX() at
both access sites: before the while loop and inside it. Return
-EFSCORRUPTED if the index pointer is out of range, consistent
with how other bounds violations are handled in the ext4 extent
tree code. |
| In the Linux kernel, the following vulnerability has been resolved:
Squashfs: check metadata block offset is within range
Syzkaller reports a "general protection fault in squashfs_copy_data"
This is ultimately caused by a corrupted index look-up table, which
produces a negative metadata block offset.
This is subsequently passed to squashfs_copy_data (via
squashfs_read_metadata) where the negative offset causes an out of bounds
access.
The fix is to check that the offset is within range in
squashfs_read_metadata. This will trap this and other cases. |
| MariaDB server is a community developed fork of MySQL server. From 10.6.1 until 10.6.28, 10.11.19, 11.4.13, 11.8.9, 12.3.3, and 13.0.2, MariaDB insufficiently validated counts, offsets, lengths, and field boundaries in FRM metadata while opening binary FRM files. An attacker able to place a crafted FRM file in the data directory could trigger out-of-bounds reads or writes, crash the server, or potentially execute code. This issue is fixed in versions 10.6.28, 10.11.19, 11.4.13, 11.8.9, 12.3.3, and 13.0.2. |
| Gitoxide gix-pack before 0.75.0 contains a denial of service vulnerability that allows malicious remotes to crash fetch operations by sending crafted thin-pack OFS_DELTA entries. Attackers can serve a thin pack with a REF_DELTA referencing an existing object followed by an OFS_DELTA whose base_distance exceeds pack_offset, triggering a panic in LookupRefDeltaObjectsIter that aborts the fetch process. |
| In apu, there is a possible memory corruption due to improper input validation. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS11249004; Issue ID: MSV-9170. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Check bounds for allocate_sdma_queue restore_sdma_id
allocate_sdma_queue has an option where the sdma queue id can be
specified (used by CRIU). We weren't bounds-checking that
value.
Confirm it's less than the maximum number of queues. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Check bounds on allocate_doorbell
allocated_doorbell has an option to set the doorbell id
to a specific value (used by CRIU). This value was not
bounds checked.
Check to confirm it's less than KFD_MAX_NUM_OF_QUEUES_PER_PROCESS. |
| NVIDIA GPU Display Driver for Windows and Linux contains a vulnerability in the kernel mode layer where an attacker could cause an improper validation of an array index. A successful exploit of this vulnerability might lead to code execution, denial of service, escalation of privileges, information disclosure, and data tampering. |
| NVIDIA GPU Display Driver for Windows and Linux contains a vulnerability in the kernel mode layer where an attacker could cause an improper validation of an array index. A successful exploit of this vulnerability might lead to code execution, denial of service, escalation of privileges, information disclosure, and data tampering. |
