| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
serial: caif: fix use-after-free in caif_serial ldisc_close()
There is a use-after-free bug in caif_serial where handle_tx() may
access ser->tty after the tty has been freed.
The race condition occurs between ldisc_close() and packet transmission:
CPU 0 (close) CPU 1 (xmit)
------------- ------------
ldisc_close()
tty_kref_put(ser->tty)
[tty may be freed here]
<-- race window -->
caif_xmit()
handle_tx()
tty = ser->tty // dangling ptr
tty->ops->write() // UAF!
schedule_work()
ser_release()
unregister_netdevice()
The root cause is that tty_kref_put() is called in ldisc_close() while
the network device is still active and can receive packets.
Since ser and tty have a 1:1 binding relationship with consistent
lifecycles (ser is allocated in ldisc_open and freed in ser_release
via unregister_netdevice, and each ser binds exactly one tty), we can
safely defer the tty reference release to ser_release() where the
network device is unregistered.
Fix this by moving tty_kref_put() from ldisc_close() to ser_release(),
after unregister_netdevice(). This ensures the tty reference is held
as long as the network device exists, preventing the UAF.
Note: We save ser->tty before unregister_netdevice() because ser is
embedded in netdev's private data and will be freed along with netdev
(needs_free_netdev = true).
How to reproduce: Add mdelay(500) at the beginning of ldisc_close()
to widen the race window, then run the reproducer program [1].
Note: There is a separate deadloop issue in handle_tx() when using
PORT_UNKNOWN serial ports (e.g., /dev/ttyS3 in QEMU without proper
serial backend). This deadloop exists even without this patch,
and is likely caused by inconsistency between uart_write_room() and
uart_write() in serial core. It has been addressed in a separate
patch [2].
KASAN report:
==================================================================
BUG: KASAN: slab-use-after-free in handle_tx+0x5d1/0x620
Read of size 1 at addr ffff8881131e1490 by task caif_uaf_trigge/9929
Call Trace:
<TASK>
dump_stack_lvl+0x10e/0x1f0
print_report+0xd0/0x630
kasan_report+0xe4/0x120
handle_tx+0x5d1/0x620
dev_hard_start_xmit+0x9d/0x6c0
__dev_queue_xmit+0x6e2/0x4410
packet_xmit+0x243/0x360
packet_sendmsg+0x26cf/0x5500
__sys_sendto+0x4a3/0x520
__x64_sys_sendto+0xe0/0x1c0
do_syscall_64+0xc9/0xf80
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f615df2c0d7
Allocated by task 9930:
Freed by task 64:
Last potentially related work creation:
The buggy address belongs to the object at ffff8881131e1000
which belongs to the cache kmalloc-cg-2k of size 2048
The buggy address is located 1168 bytes inside of
freed 2048-byte region [ffff8881131e1000, ffff8881131e1800)
The buggy address belongs to the physical page:
page_owner tracks the page as allocated
page last free pid 9778 tgid 9778 stack trace:
Memory state around the buggy address:
ffff8881131e1380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8881131e1400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff8881131e1480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8881131e1500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8881131e1580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
[1]: https://gist.github.com/mrpre/f683f244544f7b11e7fa87df9e6c2eeb
[2]: https://lore.kernel.org/linux-serial/20260204074327.226165-1-jiayuan.chen@linux.dev/T/#u |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: act8945a: Fix use-after-free in power_supply_changed()
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Fix this racy use-after-free by making sure the IRQ is requested _after_
the registration of the `power_supply` handle. |
| Lumiverse is a full-featured AI chat application. Prior to 0.9.7, consumeNonce() only checks that the module-level variable is set and unexpired. It does not validate any value from the incoming HTTP request or bind the nonce to the admin's session. If the admin's auth.api.signUpEmail() call fails before the before hook fires (e.g. BetterAuth rejects a duplicate email at the validation layer), the nonce is set but never consumed. Any POST /api/auth/sign-up/email request that arrives during the remaining window registers successfully regardless of who sent it. An attacker who can observe or predict when the admin is creating users (must be a dupplicate user) can race the 10-second window to register an unauthorized account. This vulnerability is fixed in 0.9.7. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/sysfs-schemes: protect memcg_path kfree() with damon_sysfs_lock
Patch series "mm/damon/sysfs-schemes: fix use-after-free for [memcg_]path".
Reads of 'memcg_path' and 'path' files in DAMON sysfs interface could race
with their writes, results in use-after-free. Fix those.
This patch (of 2):
damon_sysfs_scheme_filter->mmecg_path can be read and written by users,
via DAMON sysfs memcg_path file. It can also be indirectly read, for the
parameters {on,off}line committing to DAMON. The reads for parameters
committing are protected by damon_sysfs_lock to avoid the sysfs files
being destroyed while any of the parameters are being read. But the
user-driven direct reads and writes are not protected by any lock, while
the write is deallocating the memcg_path-pointing buffer. As a result,
the readers could read the already freed buffer (user-after-free). Note
that the user-reads don't race when the same open file is used by the
writer, due to kernfs's open file locking. Nonetheless, doing the reads
and writes with separate open files would be common. Fix it by protecting
both the user-direct reads and writes with damon_sysfs_lock. |
| A vulnerability allowing an authenticated user with the Backup Administrator role to write arbitrary files on Linux-based Veeam Backup & Replication server. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: bq25980: Fix use-after-free in power_supply_changed()
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Fix this racy use-after-free by making sure the IRQ is requested _after_
the registration of the `power_supply` handle. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: goldfish: Fix use-after-free in power_supply_changed()
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Fix this racy use-after-free by making sure the IRQ is requested _after_
the registration of the `power_supply` handle. |
| A race condition was addressed with additional validation. This issue is fixed in macOS Sequoia 15.7, macOS Tahoe 26. An app may be able to gain root privileges. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: bq256xx: Fix use-after-free in power_supply_changed()
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Fix this racy use-after-free by making sure the IRQ is requested _after_
the registration of the `power_supply` handle. |
| NVIDIA Display Driver for Linux contains a vulnerability in a kernel module, where a user could cause a race condition by reordering compiler or processor memory instructions. A successful exploit of this vulnerability might lead to denial of service. |
| MaxKB is an open-source AI assistant for enterprise. MaxKB 2.8.0 and prior are vulnerable to a server-side request forgery (SSRF) bypass in the OSS file service URL fetch functionality due to inconsistent DNS resolution between validation and actual request execution, allowing attackers to access internal network services. This vulnerability is fixed in 2.8.1. |
| Algernon is a small self-contained pure-Go web server. Prior to 1.17.6, in engine/luahandler.go, the sync.RWMutex protecting LoadCommonFunctions is released before L.Push() and L.PCall() execute. Since gopher-lua's LState is explicitly not goroutine-safe, concurrent requests race on the shared state causing Lua VM corruption. The Go race detector confirms this immediately under modest concurrency (ab -n 1000 -c 100). This vulnerability is fixed in 1.17.6. |
| Concurrency and locking defects in GSS-TSIG |
| Concurrent execution using shared resource with improper synchronization ('race condition') in Windows SMB Server allows an authorized attacker to elevate privileges over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
nouveau/dpcd: return EBUSY for aux xfer if the device is asleep
If we have runtime suspended, and userspace wants to use /dev/drm_dp_*
then just tell it the device is busy instead of crashing in the GSP
code.
WARNING: CPU: 2 PID: 565741 at drivers/gpu/drm/nouveau/nvkm/subdev/gsp/rm/r535/rpc.c:164 r535_gsp_msgq_wait+0x9a/0xb0 [nouveau]
CPU: 2 UID: 0 PID: 565741 Comm: fwupd Not tainted 6.18.10-200.fc43.x86_64 #1 PREEMPT(lazy)
Hardware name: LENOVO 20QTS0PQ00/20QTS0PQ00, BIOS N2OET65W (1.52 ) 08/05/2024
RIP: 0010:r535_gsp_msgq_wait+0x9a/0xb0 [nouveau]
This is a simple fix to get backported. We should probably engineer a
proper power domain solution to wake up devices and keep them awake
while fw updates are happening. |
| A tampering vulnerability exists when .NET Core improperly handles specially crafted files. An attacker who successfully exploited this vulnerability could write arbitrary files and directories to certain locations on a vulnerable system. However, an attacker would have limited control over the destination of the files and directories.
To exploit the vulnerability, an attacker must send a specially crafted file to a vulnerable system.
The security update fixes the vulnerability by ensuring .NET Core properly handles files. |
| Parse Server is an open source backend that can be deployed to any infrastructure that can run Node.js. Prior to 8.6.76 and 9.9.0-alpha.2, a race condition in the MFA SMS one-time password (OTP) login path allows two concurrent /login requests carrying the same OTP to both succeed and both receive valid session tokens, breaking the single-use property of the OTP. The vulnerability requires the attacker to already possess the victim's password and intercept the active SMS OTP (e.g. via SIM swap, network mirror, or phishing relay) and to race the legitimate login request, so the practical attack surface is narrow. This vulnerability is fixed in 8.6.76 and 9.9.0-alpha.2. |
| In the Linux kernel, the following vulnerability has been resolved:
net/rose: fix NULL pointer dereference in rose_transmit_link on reconnect
syzkaller reported a bug [1], and the reproducer is available at [2].
ROSE sockets use four sk->sk_state values: TCP_CLOSE, TCP_LISTEN,
TCP_SYN_SENT, and TCP_ESTABLISHED. rose_connect() already rejects
calls for TCP_ESTABLISHED (-EISCONN) and TCP_CLOSE with SS_CONNECTING
(-ECONNREFUSED), but lacks a check for TCP_SYN_SENT.
When rose_connect() is called a second time while the first connection
attempt is still in progress (TCP_SYN_SENT), it overwrites
rose->neighbour via rose_get_neigh(). If that returns NULL, the socket
is left with rose->state == ROSE_STATE_1 but rose->neighbour == NULL.
When the socket is subsequently closed, rose_release() sees
ROSE_STATE_1 and calls rose_write_internal() ->
rose_transmit_link(skb, NULL), causing a NULL pointer dereference.
Per connect(2), a second connect() while a connection is already in
progress should return -EALREADY. Add this missing check for
TCP_SYN_SENT to complete the state validation in rose_connect().
[1] https://syzkaller.appspot.com/bug?extid=d00f90e0af54102fb271
[2] https://gist.github.com/mrpre/9e6779e0d13e2c66779b1653fef80516 |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: fix i_nlink underrun during async unlink
During async unlink, we drop the `i_nlink` counter before we receive
the completion (that will eventually update the `i_nlink`) because "we
assume that the unlink will succeed". That is not a bad idea, but it
races against deletions by other clients (or against the completion of
our own unlink) and can lead to an underrun which emits a WARNING like
this one:
WARNING: CPU: 85 PID: 25093 at fs/inode.c:407 drop_nlink+0x50/0x68
Modules linked in:
CPU: 85 UID: 3221252029 PID: 25093 Comm: php-cgi8.1 Not tainted 6.14.11-cm4all1-ampere #655
Hardware name: Supermicro ARS-110M-NR/R12SPD-A, BIOS 1.1b 10/17/2023
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : drop_nlink+0x50/0x68
lr : ceph_unlink+0x6c4/0x720
sp : ffff80012173bc90
x29: ffff80012173bc90 x28: ffff086d0a45aaf8 x27: ffff0871d0eb5680
x26: ffff087f2a64a718 x25: 0000020000000180 x24: 0000000061c88647
x23: 0000000000000002 x22: ffff07ff9236d800 x21: 0000000000001203
x20: ffff07ff9237b000 x19: ffff088b8296afc0 x18: 00000000f3c93365
x17: 0000000000070000 x16: ffff08faffcbdfe8 x15: ffff08faffcbdfec
x14: 0000000000000000 x13: 45445f65645f3037 x12: 34385f6369706f74
x11: 0000a2653104bb20 x10: ffffd85f26d73290 x9 : ffffd85f25664f94
x8 : 00000000000000c0 x7 : 0000000000000000 x6 : 0000000000000002
x5 : 0000000000000081 x4 : 0000000000000481 x3 : 0000000000000000
x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff08727d3f91e8
Call trace:
drop_nlink+0x50/0x68 (P)
vfs_unlink+0xb0/0x2e8
do_unlinkat+0x204/0x288
__arm64_sys_unlinkat+0x3c/0x80
invoke_syscall.constprop.0+0x54/0xe8
do_el0_svc+0xa4/0xc8
el0_svc+0x18/0x58
el0t_64_sync_handler+0x104/0x130
el0t_64_sync+0x154/0x158
In ceph_unlink(), a call to ceph_mdsc_submit_request() submits the
CEPH_MDS_OP_UNLINK to the MDS, but does not wait for completion.
Meanwhile, between this call and the following drop_nlink() call, a
worker thread may process a CEPH_CAP_OP_IMPORT, CEPH_CAP_OP_GRANT or
just a CEPH_MSG_CLIENT_REPLY (the latter of which could be our own
completion). These will lead to a set_nlink() call, updating the
`i_nlink` counter to the value received from the MDS. If that new
`i_nlink` value happens to be zero, it is illegal to decrement it
further. But that is exactly what ceph_unlink() will do then.
The WARNING can be reproduced this way:
1. Force async unlink; only the async code path is affected. Having
no real clue about Ceph internals, I was unable to find out why the
MDS wouldn't give me the "Fxr" capabilities, so I patched
get_caps_for_async_unlink() to always succeed.
(Note that the WARNING dump above was found on an unpatched kernel,
without this kludge - this is not a theoretical bug.)
2. Add a sleep call after ceph_mdsc_submit_request() so the unlink
completion gets handled by a worker thread before drop_nlink() is
called. This guarantees that the `i_nlink` is already zero before
drop_nlink() runs.
The solution is to skip the counter decrement when it is already zero,
but doing so without a lock is still racy (TOCTOU). Since
ceph_fill_inode() and handle_cap_grant() both hold the
`ceph_inode_info.i_ceph_lock` spinlock while set_nlink() runs, this
seems like the proper lock to protect the `i_nlink` updates.
I found prior art in NFS and SMB (using `inode.i_lock`) and AFS (using
`afs_vnode.cb_lock`). All three have the zero check as well. |
| An issue was discovered in Ruby 4 before 4.0.5. A race condition leading to a use-after-free in the pthread-based getaddrinfo timeout handler (rb_getaddrinfo in ext/socket/raddrinfo.c) allows a remote attacker who can delay DNS responses near the user-specified timeout to crash a Ruby process that calls Addrinfo.getaddrinfo(..., timeout:) or Socket.tcp(..., resolv_timeout:). Memory-corruption-based exploitation is theoretically possible. The attack could, for example, be carried out through a crafted authoritative DNS server or recursive resolver. |
