| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
smb: During unmount, ensure all cached dir instances drop their dentry
The unmount process (cifs_kill_sb() calling close_all_cached_dirs()) can
race with various cached directory operations, which ultimately results
in dentries not being dropped and these kernel BUGs:
BUG: Dentry ffff88814f37e358{i=1000000000080,n=/} still in use (2) [unmount of cifs cifs]
VFS: Busy inodes after unmount of cifs (cifs)
------------[ cut here ]------------
kernel BUG at fs/super.c:661!
This happens when a cfid is in the process of being cleaned up when, and
has been removed from the cfids->entries list, including:
- Receiving a lease break from the server
- Server reconnection triggers invalidate_all_cached_dirs(), which
removes all the cfids from the list
- The laundromat thread decides to expire an old cfid.
To solve these problems, dropping the dentry is done in queued work done
in a newly-added cfid_put_wq workqueue, and close_all_cached_dirs()
flushes that workqueue after it drops all the dentries of which it's
aware. This is a global workqueue (rather than scoped to a mount), but
the queued work is minimal.
The final cleanup work for cleaning up a cfid is performed via work
queued in the serverclose_wq workqueue; this is done separate from
dropping the dentries so that close_all_cached_dirs() doesn't block on
any server operations.
Both of these queued works expect to invoked with a cfid reference and
a tcon reference to avoid those objects from being freed while the work
is ongoing.
While we're here, add proper locking to close_all_cached_dirs(), and
locking around the freeing of cfid->dentry. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-fabrics: fix kernel crash while shutting down controller
The nvme keep-alive operation, which executes at a periodic interval,
could potentially sneak in while shutting down a fabric controller.
This may lead to a race between the fabric controller admin queue
destroy code path (invoked while shutting down controller) and hw/hctx
queue dispatcher called from the nvme keep-alive async request queuing
operation. This race could lead to the kernel crash shown below:
Call Trace:
autoremove_wake_function+0x0/0xbc (unreliable)
__blk_mq_sched_dispatch_requests+0x114/0x24c
blk_mq_sched_dispatch_requests+0x44/0x84
blk_mq_run_hw_queue+0x140/0x220
nvme_keep_alive_work+0xc8/0x19c [nvme_core]
process_one_work+0x200/0x4e0
worker_thread+0x340/0x504
kthread+0x138/0x140
start_kernel_thread+0x14/0x18
While shutting down fabric controller, if nvme keep-alive request sneaks
in then it would be flushed off. The nvme_keep_alive_end_io function is
then invoked to handle the end of the keep-alive operation which
decrements the admin->q_usage_counter and assuming this is the last/only
request in the admin queue then the admin->q_usage_counter becomes zero.
If that happens then blk-mq destroy queue operation (blk_mq_destroy_
queue()) which could be potentially running simultaneously on another
cpu (as this is the controller shutdown code path) would forward
progress and deletes the admin queue. So, now from this point onward
we are not supposed to access the admin queue resources. However the
issue here's that the nvme keep-alive thread running hw/hctx queue
dispatch operation hasn't yet finished its work and so it could still
potentially access the admin queue resource while the admin queue had
been already deleted and that causes the above crash.
The above kernel crash is regression caused due to changes implemented
in commit a54a93d0e359 ("nvme: move stopping keep-alive into
nvme_uninit_ctrl()"). Ideally we should stop keep-alive before destroyin
g the admin queue and freeing the admin tagset so that it wouldn't sneak
in during the shutdown operation. However we removed the keep alive stop
operation from the beginning of the controller shutdown code path in commit
a54a93d0e359 ("nvme: move stopping keep-alive into nvme_uninit_ctrl()")
and added it under nvme_uninit_ctrl() which executes very late in the
shutdown code path after the admin queue is destroyed and its tagset is
removed. So this change created the possibility of keep-alive sneaking in
and interfering with the shutdown operation and causing observed kernel
crash.
To fix the observed crash, we decided to move nvme_stop_keep_alive() from
nvme_uninit_ctrl() to nvme_remove_admin_tag_set(). This change would ensure
that we don't forward progress and delete the admin queue until the keep-
alive operation is finished (if it's in-flight) or cancelled and that would
help contain the race condition explained above and hence avoid the crash.
Moving nvme_stop_keep_alive() to nvme_remove_admin_tag_set() instead of
adding nvme_stop_keep_alive() to the beginning of the controller shutdown
code path in nvme_stop_ctrl(), as was the case earlier before commit
a54a93d0e359 ("nvme: move stopping keep-alive into nvme_uninit_ctrl()"),
would help save one callsite of nvme_stop_keep_alive(). |
| In the Linux kernel, the following vulnerability has been resolved:
comedi: Flush partial mappings in error case
If some remap_pfn_range() calls succeeded before one failed, we still have
buffer pages mapped into the userspace page tables when we drop the buffer
reference with comedi_buf_map_put(bm). The userspace mappings are only
cleaned up later in the mmap error path.
Fix it by explicitly flushing all mappings in our VMA on the error path.
See commit 79a61cc3fc04 ("mm: avoid leaving partial pfn mappings around in
error case"). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_event: Align BR/EDR JUST_WORKS paring with LE
This aligned BR/EDR JUST_WORKS method with LE which since 92516cd97fd4
("Bluetooth: Always request for user confirmation for Just Works")
always request user confirmation with confirm_hint set since the
likes of bluetoothd have dedicated policy around JUST_WORKS method
(e.g. main.conf:JustWorksRepairing).
CVE: CVE-2024-8805 |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "mmc: dw_mmc: Fix IDMAC operation with pages bigger than 4K"
The commit 8396c793ffdf ("mmc: dw_mmc: Fix IDMAC operation with pages
bigger than 4K") increased the max_req_size, even for 4K pages, causing
various issues:
- Panic booting the kernel/rootfs from an SD card on Rockchip RK3566
- Panic booting the kernel/rootfs from an SD card on StarFive JH7100
- "swiotlb buffer is full" and data corruption on StarFive JH7110
At this stage no fix have been found, so it's probably better to just
revert the change.
This reverts commit 8396c793ffdf28bb8aee7cfe0891080f8cab7890. |
| In the Linux kernel, the following vulnerability has been resolved:
vdpa: solidrun: Fix UB bug with devres
In psnet_open_pf_bar() and snet_open_vf_bar() a string later passed to
pcim_iomap_regions() is placed on the stack. Neither
pcim_iomap_regions() nor the functions it calls copy that string.
Should the string later ever be used, this, consequently, causes
undefined behavior since the stack frame will by then have disappeared.
Fix the bug by allocating the strings on the heap through
devm_kasprintf(). |
| In the Linux kernel, the following vulnerability has been resolved:
nommu: pass NULL argument to vma_iter_prealloc()
When deleting a vma entry from a maple tree, it has to pass NULL to
vma_iter_prealloc() in order to calculate internal state of the tree, but
it passed a wrong argument. As a result, nommu kernels crashed upon
accessing a vma iterator, such as acct_collect() reading the size of vma
entries after do_munmap().
This commit fixes this issue by passing a right argument to the
preallocation call. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/siw: Add sendpage_ok() check to disable MSG_SPLICE_PAGES
While running ISER over SIW, the initiator machine encounters a warning
from skb_splice_from_iter() indicating that a slab page is being used in
send_page. To address this, it is better to add a sendpage_ok() check
within the driver itself, and if it returns 0, then MSG_SPLICE_PAGES flag
should be disabled before entering the network stack.
A similar issue has been discussed for NVMe in this thread:
https://lore.kernel.org/all/20240530142417.146696-1-ofir.gal@volumez.com/
WARNING: CPU: 0 PID: 5342 at net/core/skbuff.c:7140 skb_splice_from_iter+0x173/0x320
Call Trace:
tcp_sendmsg_locked+0x368/0xe40
siw_tx_hdt+0x695/0xa40 [siw]
siw_qp_sq_process+0x102/0xb00 [siw]
siw_sq_resume+0x39/0x110 [siw]
siw_run_sq+0x74/0x160 [siw]
kthread+0xd2/0x100
ret_from_fork+0x34/0x40
ret_from_fork_asm+0x1a/0x30 |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-multipath: defer partition scanning
We need to suppress the partition scan from occuring within the
controller's scan_work context. If a path error occurs here, the IO will
wait until a path becomes available or all paths are torn down, but that
action also occurs within scan_work, so it would deadlock. Defer the
partion scan to a different context that does not block scan_work. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Add sk_is_inet and IS_ICSK check in tls_sw_has_ctx_tx/rx
As the introduction of the support for vsock and unix sockets in sockmap,
tls_sw_has_ctx_tx/rx cannot presume the socket passed in must be IS_ICSK.
vsock and af_unix sockets have vsock_sock and unix_sock instead of
inet_connection_sock. For these sockets, tls_get_ctx may return an invalid
pointer and cause page fault in function tls_sw_ctx_rx.
BUG: unable to handle page fault for address: 0000000000040030
Workqueue: vsock-loopback vsock_loopback_work
RIP: 0010:sk_psock_strp_data_ready+0x23/0x60
Call Trace:
? __die+0x81/0xc3
? no_context+0x194/0x350
? do_page_fault+0x30/0x110
? async_page_fault+0x3e/0x50
? sk_psock_strp_data_ready+0x23/0x60
virtio_transport_recv_pkt+0x750/0x800
? update_load_avg+0x7e/0x620
vsock_loopback_work+0xd0/0x100
process_one_work+0x1a7/0x360
worker_thread+0x30/0x390
? create_worker+0x1a0/0x1a0
kthread+0x112/0x130
? __kthread_cancel_work+0x40/0x40
ret_from_fork+0x1f/0x40
v2:
- Add IS_ICSK check
v3:
- Update the commits in Fixes |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Never decrement pending_async_copies on error
The error flow in nfsd4_copy() calls cleanup_async_copy(), which
already decrements nn->pending_async_copies. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: Fix response handling in iwl_mvm_send_recovery_cmd()
1. The size of the response packet is not validated.
2. The response buffer is not freed.
Resolve these issues by switching to iwl_mvm_send_cmd_status(),
which handles both size validation and frees the buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: TSO: Fix unbalanced DMA map/unmap for non-paged SKB data
In case the non-paged data of a SKB carries protocol header and protocol
payload to be transmitted on a certain platform that the DMA AXI address
width is configured to 40-bit/48-bit, or the size of the non-paged data
is bigger than TSO_MAX_BUFF_SIZE on a certain platform that the DMA AXI
address width is configured to 32-bit, then this SKB requires at least
two DMA transmit descriptors to serve it.
For example, three descriptors are allocated to split one DMA buffer
mapped from one piece of non-paged data:
dma_desc[N + 0],
dma_desc[N + 1],
dma_desc[N + 2].
Then three elements of tx_q->tx_skbuff_dma[] will be allocated to hold
extra information to be reused in stmmac_tx_clean():
tx_q->tx_skbuff_dma[N + 0],
tx_q->tx_skbuff_dma[N + 1],
tx_q->tx_skbuff_dma[N + 2].
Now we focus on tx_q->tx_skbuff_dma[entry].buf, which is the DMA buffer
address returned by DMA mapping call. stmmac_tx_clean() will try to
unmap the DMA buffer _ONLY_IF_ tx_q->tx_skbuff_dma[entry].buf
is a valid buffer address.
The expected behavior that saves DMA buffer address of this non-paged
data to tx_q->tx_skbuff_dma[entry].buf is:
tx_q->tx_skbuff_dma[N + 0].buf = NULL;
tx_q->tx_skbuff_dma[N + 1].buf = NULL;
tx_q->tx_skbuff_dma[N + 2].buf = dma_map_single();
Unfortunately, the current code misbehaves like this:
tx_q->tx_skbuff_dma[N + 0].buf = dma_map_single();
tx_q->tx_skbuff_dma[N + 1].buf = NULL;
tx_q->tx_skbuff_dma[N + 2].buf = NULL;
On the stmmac_tx_clean() side, when dma_desc[N + 0] is closed by the
DMA engine, tx_q->tx_skbuff_dma[N + 0].buf is a valid buffer address
obviously, then the DMA buffer will be unmapped immediately.
There may be a rare case that the DMA engine does not finish the
pending dma_desc[N + 1], dma_desc[N + 2] yet. Now things will go
horribly wrong, DMA is going to access a unmapped/unreferenced memory
region, corrupted data will be transmited or iommu fault will be
triggered :(
In contrast, the for-loop that maps SKB fragments behaves perfectly
as expected, and that is how the driver should do for both non-paged
data and paged frags actually.
This patch corrects DMA map/unmap sequences by fixing the array index
for tx_q->tx_skbuff_dma[entry].buf when assigning DMA buffer address.
Tested and verified on DWXGMAC CORE 3.20a |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_api: fix xa_insert() error path in tcf_block_get_ext()
This command:
$ tc qdisc replace dev eth0 ingress_block 1 egress_block 1 clsact
Error: block dev insert failed: -EBUSY.
fails because user space requests the same block index to be set for
both ingress and egress.
[ side note, I don't think it even failed prior to commit 913b47d3424e
("net/sched: Introduce tc block netdev tracking infra"), because this
is a command from an old set of notes of mine which used to work, but
alas, I did not scientifically bisect this ]
The problem is not that it fails, but rather, that the second time
around, it fails differently (and irrecoverably):
$ tc qdisc replace dev eth0 ingress_block 1 egress_block 1 clsact
Error: dsa_core: Flow block cb is busy.
[ another note: the extack is added by me for illustration purposes.
the context of the problem is that clsact_init() obtains the same
&q->ingress_block pointer as &q->egress_block, and since we call
tcf_block_get_ext() on both of them, "dev" will be added to the
block->ports xarray twice, thus failing the operation: once through
the ingress block pointer, and once again through the egress block
pointer. the problem itself is that when xa_insert() fails, we have
emitted a FLOW_BLOCK_BIND command through ndo_setup_tc(), but the
offload never sees a corresponding FLOW_BLOCK_UNBIND. ]
Even correcting the bad user input, we still cannot recover:
$ tc qdisc replace dev swp3 ingress_block 1 egress_block 2 clsact
Error: dsa_core: Flow block cb is busy.
Basically the only way to recover is to reboot the system, or unbind and
rebind the net device driver.
To fix the bug, we need to fill the correct error teardown path which
was missed during code movement, and call tcf_block_offload_unbind()
when xa_insert() fails.
[ last note, fundamentally I blame the label naming convention in
tcf_block_get_ext() for the bug. The labels should be named after what
they do, not after the error path that jumps to them. This way, it is
obviously wrong that two labels pointing to the same code mean
something is wrong, and checking the code correctness at the goto site
is also easier ] |
| In the Linux kernel, the following vulnerability has been resolved:
fork: only invoke khugepaged, ksm hooks if no error
There is no reason to invoke these hooks early against an mm that is in an
incomplete state.
The change in commit d24062914837 ("fork: use __mt_dup() to duplicate
maple tree in dup_mmap()") makes this more pertinent as we may be in a
state where entries in the maple tree are not yet consistent.
Their placement early in dup_mmap() only appears to have been meaningful
for early error checking, and since functionally it'd require a very small
allocation to fail (in practice 'too small to fail') that'd only occur in
the most dire circumstances, meaning the fork would fail or be OOM'd in
any case.
Since both khugepaged and KSM tracking are there to provide optimisations
to memory performance rather than critical functionality, it doesn't
really matter all that much if, under such dire memory pressure, we fail
to register an mm with these.
As a result, we follow the example of commit d2081b2bf819 ("mm:
khugepaged: make khugepaged_enter() void function") and make ksm_fork() a
void function also.
We only expose the mm to these functions once we are done with them and
only if no error occurred in the fork operation. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_reject_ipv6: fix potential crash in nf_send_reset6()
I got a syzbot report without a repro [1] crashing in nf_send_reset6()
I think the issue is that dev->hard_header_len is zero, and we attempt
later to push an Ethernet header.
Use LL_MAX_HEADER, as other functions in net/ipv6/netfilter/nf_reject_ipv6.c.
[1]
skbuff: skb_under_panic: text:ffffffff89b1d008 len:74 put:14 head:ffff88803123aa00 data:ffff88803123a9f2 tail:0x3c end:0x140 dev:syz_tun
kernel BUG at net/core/skbuff.c:206 !
Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 0 UID: 0 PID: 7373 Comm: syz.1.568 Not tainted 6.12.0-rc2-syzkaller-00631-g6d858708d465 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
RIP: 0010:skb_panic net/core/skbuff.c:206 [inline]
RIP: 0010:skb_under_panic+0x14b/0x150 net/core/skbuff.c:216
Code: 0d 8d 48 c7 c6 60 a6 29 8e 48 8b 54 24 08 8b 0c 24 44 8b 44 24 04 4d 89 e9 50 41 54 41 57 41 56 e8 ba 30 38 02 48 83 c4 20 90 <0f> 0b 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3
RSP: 0018:ffffc900045269b0 EFLAGS: 00010282
RAX: 0000000000000088 RBX: dffffc0000000000 RCX: cd66dacdc5d8e800
RDX: 0000000000000000 RSI: 0000000000000200 RDI: 0000000000000000
RBP: ffff88802d39a3d0 R08: ffffffff8174afec R09: 1ffff920008a4ccc
R10: dffffc0000000000 R11: fffff520008a4ccd R12: 0000000000000140
R13: ffff88803123aa00 R14: ffff88803123a9f2 R15: 000000000000003c
FS: 00007fdbee5ff6c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000005d322000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
skb_push+0xe5/0x100 net/core/skbuff.c:2636
eth_header+0x38/0x1f0 net/ethernet/eth.c:83
dev_hard_header include/linux/netdevice.h:3208 [inline]
nf_send_reset6+0xce6/0x1270 net/ipv6/netfilter/nf_reject_ipv6.c:358
nft_reject_inet_eval+0x3b9/0x690 net/netfilter/nft_reject_inet.c:48
expr_call_ops_eval net/netfilter/nf_tables_core.c:240 [inline]
nft_do_chain+0x4ad/0x1da0 net/netfilter/nf_tables_core.c:288
nft_do_chain_inet+0x418/0x6b0 net/netfilter/nft_chain_filter.c:161
nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline]
nf_hook_slow+0xc3/0x220 net/netfilter/core.c:626
nf_hook include/linux/netfilter.h:269 [inline]
NF_HOOK include/linux/netfilter.h:312 [inline]
br_nf_pre_routing_ipv6+0x63e/0x770 net/bridge/br_netfilter_ipv6.c:184
nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline]
nf_hook_bridge_pre net/bridge/br_input.c:277 [inline]
br_handle_frame+0x9fd/0x1530 net/bridge/br_input.c:424
__netif_receive_skb_core+0x13e8/0x4570 net/core/dev.c:5562
__netif_receive_skb_one_core net/core/dev.c:5666 [inline]
__netif_receive_skb+0x12f/0x650 net/core/dev.c:5781
netif_receive_skb_internal net/core/dev.c:5867 [inline]
netif_receive_skb+0x1e8/0x890 net/core/dev.c:5926
tun_rx_batched+0x1b7/0x8f0 drivers/net/tun.c:1550
tun_get_user+0x3056/0x47e0 drivers/net/tun.c:2007
tun_chr_write_iter+0x10d/0x1f0 drivers/net/tun.c:2053
new_sync_write fs/read_write.c:590 [inline]
vfs_write+0xa6d/0xc90 fs/read_write.c:683
ksys_write+0x183/0x2b0 fs/read_write.c:736
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fdbeeb7d1ff
Code: 89 54 24 18 48 89 74 24 10 89 7c 24 08 e8 c9 8d 02 00 48 8b 54 24 18 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 31 44 89 c7 48 89 44 24 08 e8 1c 8e 02 00 48
RSP: 002b:00007fdbee5ff000 EFLAGS: 00000293 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 00007fdbeed36058 RCX: 00007fdbeeb7d1ff
RDX: 000000000000008e RSI: 0000000020000040 RDI: 00000000000000c8
RBP: 00007fdbeebf12be R08: 0000000
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Check the validity of nr_words in bpf_iter_bits_new()
Check the validity of nr_words in bpf_iter_bits_new(). Without this
check, when multiplication overflow occurs for nr_bits (e.g., when
nr_words = 0x0400-0001, nr_bits becomes 64), stack corruption may occur
due to bpf_probe_read_kernel_common(..., nr_bytes = 0x2000-0008).
Fix it by limiting the maximum value of nr_words to 511. The value is
derived from the current implementation of BPF memory allocator. To
ensure compatibility if the BPF memory allocator's size limitation
changes in the future, use the helper bpf_mem_alloc_check_size() to
check whether nr_bytes is too larger. And return -E2BIG instead of
-ENOMEM for oversized nr_bytes. |
| In the Linux kernel, the following vulnerability has been resolved:
fsdax: dax_unshare_iter needs to copy entire blocks
The code that copies data from srcmap to iomap in dax_unshare_iter is
very very broken, which bfoster's recent fsx changes have exposed.
If the pos and len passed to dax_file_unshare are not aligned to an
fsblock boundary, the iter pos and length in the _iter function will
reflect this unalignment.
dax_iomap_direct_access always returns a pointer to the start of the
kmapped fsdax page, even if its pos argument is in the middle of that
page. This is catastrophic for data integrity when iter->pos is not
aligned to a page, because daddr/saddr do not point to the same byte in
the file as iter->pos. Hence we corrupt user data by copying it to the
wrong place.
If iter->pos + iomap_length() in the _iter function not aligned to a
page, then we fail to copy a full block, and only partially populate the
destination block. This is catastrophic for data confidentiality
because we expose stale pmem contents.
Fix both of these issues by aligning copy_pos/copy_len to a page
boundary (remember, this is fsdax so 1 fsblock == 1 base page) so that
we always copy full blocks.
We're not done yet -- there's no call to invalidate_inode_pages2_range,
so programs that have the file range mmap'd will continue accessing the
old memory mapping after the file metadata updates have completed.
Be careful with the return value -- if the unshare succeeds, we still
need to return the number of bytes that the iomap iter thinks we're
operating on. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Add rough attr alloc_size check |
| In the Linux kernel, the following vulnerability has been resolved:
iov_iter: fix copy_page_from_iter_atomic() if KMAP_LOCAL_FORCE_MAP
generic/077 on x86_32 CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP=y with highmem,
on huge=always tmpfs, issues a warning and then hangs (interruptibly):
WARNING: CPU: 5 PID: 3517 at mm/highmem.c:622 kunmap_local_indexed+0x62/0xc9
CPU: 5 UID: 0 PID: 3517 Comm: cp Not tainted 6.12.0-rc4 #2
...
copy_page_from_iter_atomic+0xa6/0x5ec
generic_perform_write+0xf6/0x1b4
shmem_file_write_iter+0x54/0x67
Fix copy_page_from_iter_atomic() by limiting it in that case
(include/linux/skbuff.h skb_frag_must_loop() does similar).
But going forward, perhaps CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP is too
surprising, has outlived its usefulness, and should just be removed? |
