| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
dma-direct: return struct page from dma_direct_alloc_from_pool()
Commit 5b138c534fda ("dma-direct: factor out a dma_direct_alloc_from_pool
helper") changed dma_direct_alloc_from_pool() to return the CPU address
from dma_alloc_from_pool(). That fits dma_direct_alloc(), but
dma_direct_alloc_pages() also uses the helper and expects a struct page *.
Fix this by making dma_direct_alloc_from_pool() return the struct page *
again, and pass the CPU address back through an out-parameter for the
dma_direct_alloc() caller. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: nVM: Ensure INVVPID is emulated on the correct physical CPU
When emulating INVVPID, KVM executes INVVPID on the physical CPU using
vpid02 (instead of the L1 assigned VPID), after doing some validations
on the operands. However, it is possible that the physical CPU KVM
executes INVVPID on is different from the CPU L2 is running on.
For example, in the following scenario:
- L2 runs on CPU #1 and exits to L1 (vmx->nested.vmcs02.cpu=1)
- L1 migrates to CPU #2 and executes INVVPID
- KVM executes INVVPID on CPU #2
- L1 migrates back to CPU #1 and runs L2 (vmx->nested.vmcs02.cpu=1)
The TLB entries on CPU #1 are never invalidated, because INVVPID was
executed on CPU #2, and vmcs02 never ran on a different pCPU (i.e.
vmx_vcpu_load_vmcs() will *not* request KVM_REQ_TLB_FLUSH).
Ensure that INVVPID is being executed on the same pCPU that L2 last ran
on, and if not, fallback to clearing last_vpid=0 to trigger a full VPID
flush on the next nested VM-Enter (as KVM will detect L1 using a
different VPID for L2). If L2 ends up running on a different pCPU, KVM
will flush the TLB anyway through vmx_vcpu_load_vmcs(). |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Fix memory corruption by not reinjecting CK machine checks
Channel-subsystem damage machine checks are for the host channel
subsystem. The guest channel subsystem is emulated in the userspace VMM.
There is no point in forwarding such machine checks into the guest.
This also simplifies the machine check reinjection and avoids kfree of a
stack variable as reported by sashiko. There might be still machine
checks that have the ck bit set with another bit (like instruction
damage), mask out the CK bit in s390_backup_mcck_info(), like the CP and
ED bits already are. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: vgic-v3: take an LPI reference in vgic_v3_save_pending_tables
vgic_v3_save_pending_tables() iterates dist->lpi_xa using xa_for_each()
and dereferences the returned struct vgic_irq in the loop body without
holding a reference on the LPI.
The xarray iterator only provides temporary RCU coverage while looking up
the current entry. That is not sufficient for this loop body, which reads
fields from struct vgic_irq and performs guest memory accesses before the
iteration completes.
A concurrent path can trigger this race: the irqfd cached injection path
(vgic_its_inject_cached_translation) obtains a transient LPI reference
via vgic_its_check_cache() without holding kvm->lock, vcpu->mutex,
config_lock, or its_lock. If guest ITS DISCARD then drops the cache and
ITE references under its_lock, the transient inject reference may become
the final one. When vgic_put_irq() drops it, the LPI is erased from
lpi_xa and freed via kfree_rcu(). Meanwhile, vgic_v3_save_pending_tables()
may still hold a stale pointer obtained from the xarray iterator and
dereference it after the RCU grace period completes.
Fix this by re-fetching each iterated LPI via vgic_get_irq(), which takes
a stable reference, and dropping it with vgic_put_irq() on all paths.
This matches the pattern already used by other lpi_xa iterators in the
vgic ITS code. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: vgic-its: Don't dereference a NULL collection on ITT save
MAPC with V=0 drops ite->collection but leaves the ITE on the device's
ITT list, and vgic_its_save_ite() dereferences it unconditionally. A
guest that issues MAPD, MAPTI and then MAPC(V=0) therefore oopses the
host when the VMM issues KVM_DEV_ARM_ITS_SAVE_TABLES to migrate it.
That sequence is UNPREDICTABLE per the architecture, but KVM already
handles the resulting state in the translate, MOVI and DISCARD paths.
Save a zeroed entry, which vgic_its_restore_ite() reads back as
invalid. Skipping the ITE instead would leave the ITT slot holding
whatever is in guest memory, and restore rejects an entry naming a
collection the restored collection table does not have. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: BPF: Refactor jump offset calculation in tail call
The old macro-based jmp_offset calculation derives the jump distance
from a stale prior-pass code stride, which can lead to wrong branch
offsets and soft lockups under extra JIT passes.
Fix this by calculating the offset directly on the absolute target:
"ctx->offset[insn + 1] - ctx->idx".
To avoid a false 16-bit range check abort during size estimation, add
a "ctx->image == NULL" guard to inject a safe dummy offset. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: validate MOVE_RANGE destination size
F2FS_IOC_MOVE_RANGE checks the source range, but not the destination end
before updating i_size. A source hole can expose this: __clone_blkaddrs()
skips NULL_ADDR entries and returns success, so the caller can still extend
the destination inode with unchecked pos_out + len.
Reject destination overflow and use inode_newsize_ok() before extending
the destination inode. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: limit recovery filename logging to stored length
F2FS stores recovery filenames as a length plus a fixed-size i_name
buffer. The buffer is not NUL-terminated, but recover_inode() and
recover_dentry() print it with %s.
For a 255-byte filename, recovery logging can read past i_name into the
following raw inode fields.
Print the name with a precision bounded by i_namelen and F2FS_NAME_LEN. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to clear dirty flag on folio in error path
If node block is corrupted due to chksum mismatch or inconsistent
footer info, it needs to drop clear flag of node folio, in order
to persist inconsistent node data to storage. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Add TLB flush after MES queue eviction/suspension
MES (Micro Engine Scheduler) does not perform heavy-weight TLB
invalidation after unmapping queues, unlike HWS which does this
automatically. This causes a race condition where in-flight DMA
descriptors can access memory that has been unmapped, leading to page
faults and GPU queue hangs during SVM page migration.
The issue manifests as KFDSVMRangeTest.MultiThreadMigrationTest
failures on gfx1151 (Strix Point) with XNACK mode 1 enabled - the GPU
compute queue hangs with packets submitted but never consumed.
Add kfd_flush_tlb() calls after MES queue removal in two locations:
- evict_process_queues_cpsch(): after all queues removed during eviction
- suspend_queues(): after debug/criu queue suspension (with mem_fence barrier)
This ensures all in-flight memory accesses from unmapped queues are
flushed before memory is freed or migrated.
(cherry picked from commit f5c4f88e0f9c45a8fb9dfac0c1df726c95e41b77) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Fix error path at svm_migrate_copy_to_ram
If page migration from device to sys ram fails for some reasons driver needs
release and unlock allocated system pages. To do that driver should use page
physical address, or pfn, then get struct page*. Current driver uses dma
address(for adev) that is not correct with IOMMU enabled, or even in general.
The patch releases and unlocks allocated system pages based on where migration
failed by struct page* of sys ram pages. Also dma_unmap correspodent system
ram pages at error path. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Fix the case that vm range is hole at svm_migrate_copy_to_vram
When migration vm range is hole at cpu side(MIGRATE_PFN_MIGRATE set +
MIGRATE_PFN_VALID unset) driver still allocates device pages. There is no
dma map of src pages and migration. j is 0 and svm_migrate_copy_memory_gart()
will return an uninitialized r. That can trigger out_free_vram_pages to drop
all VRAM just set up.
Initialize r and only call the last svm_migrate_copy_memory_gart if j > 0.
Current code postponed the last page to the final copy. This patch flushes on
the last page when reach to the end of current drm_buddy_block; avoids another
svm_migrate_copy_memory_gart. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/sysfb: ofdrm: Fix integer overflow in fb_size calculation
The framebuffer size calculation `fb_size = linebytes * height` can
overflow when both values are large (e.g., 46341 * 46341 > INT_MAX).
Since linebytes and height are both int types, the multiplication is
performed as int * int, which results in undefined behavior on overflow.
Use check_mul_overflow() to detect and prevent this overflow, consistent
with the approach used in simpledrm.c and corebootdrm.c. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau: unsubscribe the channel-kill event before the fence context
nouveau_channel_del() tears the fence context down first and only drops
the channel-kill subscription later, in the middle of the nvif object
teardown:
if (chan->fence)
nouveau_fence(chan->cli->drm)->context_del(chan);
...
nvif_object_dtor(&chan->vram);
nvif_event_dtor(&chan->kill);
The subscribed handler is nouveau_channel_killed(), which calls
nouveau_channel_kill() and from there nouveau_fence_context_kill() on
chan->fence. A kill event delivered in that window takes fctx->lock and
walks fctx->pending on a fence context that context_del() has already
freed.
Nothing reaches this below Fermi today, because the subscription is
gated on FERMI_CHANNEL_GPFIFO and nothing kills a channel there. On
Fermi and newer the window is real but narrow, since a kill has to land
exactly while the channel is being destroyed. That is reason enough on
its own, which is why this carries a Fixes: tag. The last patch in this
series subscribes Tesla channels as well; nothing kills those today, so
it does not widen the exposure now, but it is the groundwork for a
recovery path that would, and the ordering is better fixed before that
lands than alongside it.
Drop the subscription before anything it depends on is torn down. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Disable preemption in bpf_get_stackid
The get_perf_callchain call needs disabled preemption plus we need
it disabled as long as we access its returned trace entries buffer.
Note the bpf_get_stackid_pe function is executed already with
preemption disabled. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: Allow per function PCI slots to fix slot reset on s390
On s390 systems, which use a machine level hypervisor, PCI devices are
always accessed through a form of PCI pass-through which fundamentally
operates on a per PCI function granularity. This is also reflected in the
s390 PCI hotplug driver which creates hotplug slots for individual PCI
functions. Its reset_slot() function, which is a wrapper for
zpci_hot_reset_device(), thus also resets individual functions.
Currently, the pci_create_slot() assigns the same pci_slot object to
multifunction devices. This approach worked fine on s390 systems that only
exposed virtual functions as individual PCI domains to the operating
system. Since commit 44510d6fa0c0 ("s390/pci: Handling multifunctions")
s390 supports exposing the topology of multifunction PCI devices by
grouping them in a shared PCI domain. This creates a problem when resetting
a function through the hotplug driver's slot_reset() interface.
When attempting to reset a function through the hotplug driver, the shared
slot assignment causes the wrong function to be reset instead of the
intended one. It also leaks memory as we do create a pci_slot object for
the function, but don't correctly free it in pci_slot_release().
Add a flag for struct pci_slot to allow per function PCI slots for
functions managed through a hypervisor, which exposes individual PCI
functions while retaining the topology. Since we can use all 8 bits for
slot 'number' (for ARI devices), change slot 'number' u16 to account for
special values PCI_SLOT_PLACEHOLDER and PCI_SLOT_ALL_DEVICES. |
| In the Linux kernel, the following vulnerability has been resolved:
KEYS: trusted: Fix TPM teardown ordering
trusted_tpm_exit() drops the TPM chip reference and frees the digest
array before unregistering the trusted key type. key_type_lookup()
holds key_types_sem for reading until the key operation finishes, while
unregister_key_type() takes it for writing. It therefore provides the
synchronization point that must precede backend teardown.
The current order permits this interleaving:
CPU 0 CPU 1
trusted_tpm_exit() key_type_lookup("trusted")
put_device(&chip->dev) trusted_tpm_seal()
kfree(digests) pcrlock()
unregister_key_type() tpm_pcr_extend(..., digests)
CPU 1 can consequently dereference the freed digest array. The chip can
also be released before callbacks stop using it.
KASAN reported:
BUG: KASAN: slab-use-after-free in tpm_pcr_extend+0x1f0/0x200
Read of size 2 at addr ffff88810872d000 by task poc/89
Call Trace:
tpm_pcr_extend+0x1f0/0x200
pcrlock+0x42/0x70 [trusted]
trusted_tpm_seal+0x1b6/0x570 [trusted]
trusted_instantiate+0x293/0x340 [trusted]
__key_instantiate_and_link+0xb2/0x2b0
__key_create_or_update+0x61e/0xb50
__do_sys_add_key+0x1b8/0x310
Allocated by task 88:
__kmalloc_noprof+0x1a7/0x490
do_one_initcall+0xa1/0x390
do_init_module+0x2df/0x840
Freed by task 90:
kfree+0x131/0x3c0
trusted_tpm_exit+0x59/0xa0 [trusted]
__do_sys_delete_module+0x346/0x510
Move unregister_key_type() before releasing either resource. This stops
new lookups and waits for in-flight key operations to finish before the
backend state is destroyed. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix cred UAF caused by begin_current_label_crit_section()
AppArmor's begin_current_label_crit_section() is a scary function called
from lots of LSM hooks (in particular VFS/socket-related ones) that checks
if the label referenced by the current creds is marked FLAG_STALE, and if
so, attempts to use aa_replace_current_label() to replace the creds with an
updated version that uses a new label.
The first problem with this is that it would directly lead to UAF of
`struct cred` if anything in the kernel takes a pointer to the current
creds and accesses these past a security hook invocation that replaces
creds, like so:
```
const struct cred *cred = current_cred();
alloc_file_pseudo(...);
uid_t uid = cred->euid;
```
I don't know if anything in the kernel actually does this, but I think it
is very surprising that this pattern could lead to UAF.
The second problem is that things go wrong when aa_replace_current_label()
runs with overridden credentials. aa_replace_current_label() bails out if
`current_cred() != current_real_cred()` (mirroring the check in
proc_pid_attr_write()), but this check can't actually reliably detect
overridden credentials because the overridden creds can be the same as the
objective creds.
So in approximately the following scenario, things go wrong:
1. task begins with <creds A> (as both objective and subjective creds),
with refcount=2
2. task grabs an extra reference on <creds A> for overriding
3. task calls override_creds(<creds A>), which returns a pointer to the old
subjective creds (<creds A>)
4. task enters AppArmor LSM hook
5. AppArmor checks that objective/subjective creds are equal
6. AppArmor replaces both cred pointers with <creds B> and drops 2 refs on
<creds A>
7. task leaves AppArmor LSM hook
8. task calls revert_creds(<creds A>)
9. now task->cred is <creds A> while task->real_cred is <creds B>, but the
task_struct logically holds two references to <creds B>
10. another task drops the extra reference on <creds A> that was used for
overriding, refcount drops to 0
11. now task->real_cred points to freed creds
At this point, any access to current_cred() will be UAF.
I have a test case where I run aa-disable on a profile while a process
using that profile is blocked on splice() from a FUSE passthrough file into
a full pipe; after the profile update, the pipe becomes empty, splice()
resumes, the credentials go out of sync, and a subsequent getuid() syscall
results in a KASAN UAF splat.
To fix this, instead of directly replacing creds, do it via task_work that
will run at the end of the current syscall. (The point in time at which the
cred replacement happens should have no correctness impact; it is just a
performance optimization to avoid unnecessarily touching the refcount of
the new label.)
Note that AppArmor still performs direct cred replacements in the
sb_pivotroot LSM hook after this change, and that direct cred replacements
can still happen in VFS ->write() callbacks via proc_pid_attr_write().
There are two options for what to do with aa_dup_task_ctx(): Either
explicitly reset new->label_replacement_pending after the entire
aa_task_ctx has been copied, or switch to manually copying members over.
I am switching to manually copying members over because that should make
bugs more obvious. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix out-of-bounds write when null terminating a label vec
aa_vec_unique() null terminates at vec[n - dups] when VEC_FLAG_TERMINATE
is passed. If the components are all distinct no duplicates are dropped,
dups is 0 and the terminator goes to vec[n], so the caller has to provide
room for n + 1 entries.
aa_label_strn_parse() sets up its vector with vec_setup(profile, vec, len,
gfp) and then calls aa_vec_unique(vec, len, VEC_FLAG_TERMINATE), but
vec_setup() does not reserve the terminator entry. Up to LOCAL_VEC_ENTRIES
it uses the local array of LOCAL_VEC_ENTRIES pointers, above that it
allocates exactly len pointers. The terminator therefore lands one entry
past the end of the local array when len is LOCAL_VEC_ENTRIES, and one
entry past the end of the allocation when len is larger.
len comes from the number of "//&" separated components in the label name
and label_count_strn_entries() does not bound it. An unprivileged task
reaches the parse by writing to /proc/self/attr/apparmor/current or through
lsm_set_self_attr(2), both of which go through do_setattr(), and the name
is parsed before the change_profile permission is checked.
The query_label() path behind the securityfs .access file, which is
mode 0666, performs no permission check at all. Every component has to
resolve to a loaded profile, so a system with policy loaded is required.
The other two VEC_FLAG_TERMINATE users work on a label vec that
aa_label_alloc() has already sized with "+ 1 for null terminator entry on
vec". Reserve the same entry in vec_setup() and DEFINE_VEC(). Passing
len + 1 from the caller instead would move len == LOCAL_VEC_ENTRIES out of
the local array and into kzalloc(). |
| In the Linux kernel, the following vulnerability has been resolved:
mm/migrate_device: clear stale mapping after freeing swapcache
__migrate_device_pages() reads the folio mapping before calling
folio_free_swap(). When folio_free_swap() succeeds, the folio is removed
from the swap cache, but the saved mapping still points to swap_space.
Passing the stale mapping to folio_migrate_mapping() makes it use the
mapped-folio path for a folio that is no longer in swapcache. It can then
operate on swap_space.i_pages with invalid reference accounting,
eventually triggering a folio reference count BUG.
After a successful split, nr still contains the number of pages in the
original large folio, although each resulting page is now a separate
order-0 folio. Reset nr to 1 so each split folio is processed separately,
including its own swapcache removal and mapping lookup.
Refresh the saved mapping after folio_free_swap() so the current folio
state is used during migration. |
