| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A JNDI Injection vulnerability has been discovered in Apache CXF's JCA integration module, which can allow for code execution, if an attacker is able to manipulate the JCA deployment descriptor (ra.xml) or runtime activation parameters. Users are recommended to upgrade to versions 4.2.2 or 4.1.7 or 3.6.12, which fixes this issue. |
| A further incomplete fix for a previous advisory CVE-2026-44417 (Untrusted JMS configuration can lead to RCE) for Apache CXF has been identified, which can allow code execution capabilities, if untrusted users are allowed to configure JMS for Apache CXF. Users are recommended to upgrade to versions 4.2.2 or 4.1.7 or 3.6.12, which fixes this issue. |
| An authentication bypass vulnerability exists in the OAuth2 TokenIntrospectionService in Apache CXF. Due to a missing 'throw' keyword in the security context check, the introspection endpoint (/services/oauth2/introspect) can be accessed by any unauthenticated network attacker. However note that this is a safeguard only in the case that someone forgot to enable authentication on the service. Users are recommended to upgrade to version 4.2.2 or 4.1.7 or 3.6.12, which fixes this issue. |
| A flaw was found in the OpenShift Router. When a Route has `insecureEdgeTerminationPolicy` set to Allow, the HTTP frontend does not remove `X-SSL-Client-*` headers from incoming requests. This allows an unauthenticated attacker to send plain HTTP requests with crafted `X-SSL-Client-*` headers. As a result, backends relying on these headers for mutual TLS (Transport Layer Security) authentication can be bypassed, enabling the attacker to impersonate client certificate identities. |
| A remote code execution vulnerability exists when MSDT is called using the URL protocol from a calling application such as Word. An attacker who successfully exploits this vulnerability can run arbitrary code with the privileges of the calling application. The attacker can then install programs, view, change, or delete data, or create new accounts in the context allowed by the user’s rights.
Please see the MSRC Blog Entry for important information about steps you can take to protect your system from this vulnerability. |
| We have investigated reports of a spoofing vulnerability in AppX installer that affects Microsoft Windows. Microsoft is aware of attacks that attempt to exploit this vulnerability by using specially crafted packages that include the malware family known as Emotet/Trickbot/Bazaloader.
An attacker could craft a malicious attachment to be used in phishing campaigns. The attacker would then have to convince the user to open the specially crafted attachment. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.
Please see the Security Updates table for the link to the updated app. Alternatively you can download and install the Installer using the links provided in the FAQ section.
Please see the Mitigations and Workaround sections for important information about steps you can take to protect your system from this vulnerability.
December 27 2023 Update:
In recent months, Microsoft Threat Intelligence has seen an increase in activity from threat actors leveraging social engineering and phishing techniques to target Windows OS users and utilizing the ms-appinstaller URI scheme.
To address this increase in activity, we have updated the App Installer to disable the ms-appinstaller protocol by default and recommend other potential mitigations. |
| Wellbia's XIGNCODE3 xhunter1.sys kernel driver, version 10.0.10011.16384 through 2023.12.7.78, privilege escalation vulnerability provides access to the IRP_MJ_WRITE command interface, which allows any user process to request a PROCESS_ALL_ACCESS.
Note: KVE 2023-5589 (https://krcert.or.kr) was initially issued for version 10.0.10011.16384, but the vulnerability was not fully remediated and remains in version 2023.12.7.78. |
| openHAB, a provider of open-source home automation software, has add-ons including the visualization add-on CometVisu. In versions 3.4.0.M4 through 4.2.0,, the proxy endpoint of openHAB's CometVisu add-on can be accessed without authentication. This proxy-feature can be exploited as Server-Side Request Forgery (SSRF) to induce GET HTTP requests to internal-only servers, in case openHAB is exposed in a non-private network. Furthermore, this proxy-feature can also be exploited as a Cross-Site Scripting (XSS) vulnerability, as an attacker is able to re-route a request to their server and return a page with malicious JavaScript code. Since the browser receives this data directly from the openHAB CometVisu UI, this JavaScript code will be executed with the origin of the CometVisu UI. This allows an attacker to exploit call endpoints on an openHAB server even if the openHAB server is located in a private network. (e.g. by sending an openHAB admin a link that proxies malicious JavaScript.) This issue may lead up to Remote Code Execution (RCE) when chained with other vulnerabilities. Users should upgrade to version 4.2.1 of the CometVisu add-on of openHAB to receive a patch. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: cs_dsp: Use strnlen() on name fields in V1 wmfw files
Use strnlen() instead of strlen() on the algorithm and coefficient name
string arrays in V1 wmfw files.
In V1 wmfw files the name is a NUL-terminated string in a fixed-size
array. cs_dsp should protect against overrunning the array if the NUL
terminator is missing. |
| ColdFusion versions 2023.19, 2025.8 and earlier are affected by an Improper Input Validation vulnerability that could result in arbitrary code execution in the context of the current user. An attacker with high privileges could exploit this vulnerability to execute arbitrary code. The vulnerable component is restricted to an administrative network zone by default. Exploitation of this issue does not require user interaction. Scope is changed. |
| ColdFusion versions 2023.19, 2025.8 and earlier are affected by an Improper Input Validation vulnerability that could result in arbitrary code execution in the context of the current user. The vulnerable component is restricted to an administrative network zone by default. Exploitation of this issue does not require user interaction. Scope is changed. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mctp: Set SOCK_RCU_FREE
Bind lookup runs under RCU, so ensure that a socket doesn't go away in
the middle of a lookup. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_core: Disable works on hci_unregister_dev
This make use of disable_work_* on hci_unregister_dev since the hci_dev is
about to be freed new submissions are not disarable. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btnxpuart: Resolve TX timeout error in power save stress test
This fixes the tx timeout issue seen while running a stress test on
btnxpuart for couple of hours, such that the interval between two HCI
commands coincide with the power save timeout value of 2 seconds.
Test procedure using bash script:
<load btnxpuart.ko>
hciconfig hci0 up
//Enable Power Save feature
hcitool -i hci0 cmd 3f 23 02 00 00
while (true)
do
hciconfig hci0 leadv
sleep 2
hciconfig hci0 noleadv
sleep 2
done
Error log, after adding few more debug prints:
Bluetooth: btnxpuart_queue_skb(): 01 0A 20 01 00
Bluetooth: hci0: Set UART break: on, status=0
Bluetooth: hci0: btnxpuart_tx_wakeup() tx_work scheduled
Bluetooth: hci0: btnxpuart_tx_work() dequeue: 01 0A 20 01 00
Can't set advertise mode on hci0: Connection timed out (110)
Bluetooth: hci0: command 0x200a tx timeout
When the power save mechanism turns on UART break, and btnxpuart_tx_work()
is scheduled simultaneously, psdata->ps_state is read as PS_STATE_AWAKE,
which prevents the psdata->work from being scheduled, which is responsible
to turn OFF UART break.
This issue is fixed by adding a ps_lock mutex around UART break on/off as
well as around ps_state read/write.
btnxpuart_tx_wakeup() will now read updated ps_state value. If ps_state is
PS_STATE_SLEEP, it will first schedule psdata->work, and then it will
reschedule itself once UART break has been turned off and ps_state is
PS_STATE_AWAKE.
Tested above script for 50,000 iterations and TX timeout error was not
observed anymore. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: add srng->lock for ath11k_hal_srng_* in monitor mode
ath11k_hal_srng_* should be used with srng->lock to protect srng data.
For ath11k_dp_rx_mon_dest_process() and ath11k_dp_full_mon_process_rx(),
they use ath11k_hal_srng_* for many times but never call srng->lock.
So when running (full) monitor mode, warning will occur:
RIP: 0010:ath11k_hal_srng_dst_peek+0x18/0x30 [ath11k]
Call Trace:
? ath11k_hal_srng_dst_peek+0x18/0x30 [ath11k]
ath11k_dp_rx_process_mon_status+0xc45/0x1190 [ath11k]
? idr_alloc_u32+0x97/0xd0
ath11k_dp_rx_process_mon_rings+0x32a/0x550 [ath11k]
ath11k_dp_service_srng+0x289/0x5a0 [ath11k]
ath11k_pcic_ext_grp_napi_poll+0x30/0xd0 [ath11k]
__napi_poll+0x30/0x1f0
net_rx_action+0x198/0x320
__do_softirq+0xdd/0x319
So add srng->lock for them to avoid such warnings.
Inorder to fetch the srng->lock, should change srng's definition from
'void' to 'struct hal_srng'. And initialize them elsewhere to prevent
one line of code from being too long. This is consistent with other ring
process functions, such as ath11k_dp_process_rx().
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: tegra - do not transfer req when tegra init fails
The tegra_cmac_init or tegra_sha_init function may return an error when
memory is exhausted. It should not transfer the request when they return
an error. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix handling of received connection abort
Fix the handling of a connection abort that we've received. Though the
abort is at the connection level, it needs propagating to the calls on that
connection. Whilst the propagation bit is performed, the calls aren't then
woken up to go and process their termination, and as no further input is
forthcoming, they just hang.
Also add some tracing for the logging of connection aborts. |
| In the Linux kernel, the following vulnerability has been resolved:
KEYS: trusted: dcp: fix improper sg use with CONFIG_VMAP_STACK=y
With vmalloc stack addresses enabled (CONFIG_VMAP_STACK=y) DCP trusted
keys can crash during en- and decryption of the blob encryption key via
the DCP crypto driver. This is caused by improperly using sg_init_one()
with vmalloc'd stack buffers (plain_key_blob).
Fix this by always using kmalloc() for buffers we give to the DCP crypto
driver. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: qcom: scm: Cleanup global '__scm' on probe failures
If SCM driver fails the probe, it should not leave global '__scm'
variable assigned, because external users of this driver will assume the
probe finished successfully. For example TZMEM parts ('__scm->mempool')
are initialized later in the probe, but users of it (__scm_smc_call())
rely on the '__scm' variable.
This fixes theoretical NULL pointer exception, triggered via introducing
probe deferral in SCM driver with call trace:
qcom_tzmem_alloc+0x70/0x1ac (P)
qcom_tzmem_alloc+0x64/0x1ac (L)
qcom_scm_assign_mem+0x78/0x194
qcom_rmtfs_mem_probe+0x2d4/0x38c
platform_probe+0x68/0xc8 |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "libfs: fix infinite directory reads for offset dir"
The current directory offset allocator (based on mtree_alloc_cyclic)
stores the next offset value to return in octx->next_offset. This
mechanism typically returns values that increase monotonically over
time. Eventually, though, the newly allocated offset value wraps
back to a low number (say, 2) which is smaller than other already-
allocated offset values.
Yu Kuai <yukuai3@huawei.com> reports that, after commit 64a7ce76fb90
("libfs: fix infinite directory reads for offset dir"), if a
directory's offset allocator wraps, existing entries are no longer
visible via readdir/getdents because offset_readdir() stops listing
entries once an entry's offset is larger than octx->next_offset.
These entries vanish persistently -- they can be looked up, but will
never again appear in readdir(3) output.
The reason for this is that the commit treats directory offsets as
monotonically increasing integer values rather than opaque cookies,
and introduces this comparison:
if (dentry2offset(dentry) >= last_index) {
On 64-bit platforms, the directory offset value upper bound is
2^63 - 1. Directory offsets will monotonically increase for millions
of years without wrapping.
On 32-bit platforms, however, LONG_MAX is 2^31 - 1. The allocator
can wrap after only a few weeks (at worst).
Revert commit 64a7ce76fb90 ("libfs: fix infinite directory reads for
offset dir") to prepare for a fix that can work properly on 32-bit
systems and might apply to recent LTS kernels where shmem employs
the simple_offset mechanism. |
