| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| rdesktop through 1.9.0 contains a heap out-of-bounds read vulnerability in process_plane() in bitmap.c that allows malicious RDP servers to crash clients by sending malformed 32 bpp compressed bitmaps. Attackers can declare a large bitmap geometry with a short compressed body in bitmap update PDUs or bitmap cache orders, causing unbounded reads past the receive buffer and denial of service. |
| rdesktop through 1.9.0 contains a heap out-of-bounds read vulnerability in process_bmpcache2() in orders.c that allows malicious RDP servers to crash clients via crafted revision-2 bitmap cache orders. Attackers can send an uncompressed order with large width/height or an underflowing mode nibble and short payload, causing memcpy() reads past the receive buffer and denial of service. |
| An IPv6 FlowSpec validation bypass in the CZ.NIC BIRD Internet Routing Daemon allows an established BGP peer to inject FlowSpec rules matching destinations outside the address space authorized by the unicast-route validation procedure. With validation enabled on the receiving flow6 channel, BIRD fails to reject a destination prefix component with a nonzero offset, contrary to RFC 8956 section 5. It validates a reconstructed prefix with zero-filled skipped bits, although the original FlowSpec component can match a broader set of IPv6 addresses. Given a suitable unicast route from the peer, the rule can pass validation and, where export policy permits, be propagated to downstream peers. Downstream enforcement may cause unauthorized traffic filtering or redirection. |
| Netpbm through 11.16.00 contains a heap out-of-bounds read vulnerability in rasttopnm that allows attackers to read heap memory by supplying Sun rasterfiles with short colormaps. Attackers can craft colormapped rasterfiles with pixel bytes exceeding the palette length to leak up to 255 adjacent heap bytes into the PNM output or crash the program. |
| follow-redirects is a Node.js HTTP and HTTPS client wrapper that automatically follows redirects. From 1.16.0 until 1.16.1, escapeRegex leaves valid header-name metacharacters unescaped in sensitiveHeaders. When an application declares a sensitive header whose name contains ^ or | and follows a cross-origin or HTTPS-to-HTTP redirect, unescaped regular-expression metacharacters prevent the generated filter from matching the declared header name, and the credential header is forwarded to an attacker-controlled redirect target. This issue is fixed in version 1.16.1. |
| Picomatch through 4.0.7 contains a regular expression denial of service vulnerability that allows attackers to block the event loop by supplying single-branch repeated extglob patterns. Attackers can provide globs like +(*) or +(*a), which analyzeRepeatedExtglob in lib/parse.js skips, causing exponential backtracking against short crafted strings and denying service to Node.js applications. |
| kqueue_fork_copy_knote() indexed into the child's file descriptor table using a knote's file descriptor number without a bounds check. Because the child's table is copied before knotes are transferred, a concurrent thread in the parent could grow the parent's table and register knotes with file descriptor numbers beyond the end of the child's table, causing an out-of-bounds read.
An unprivileged local user may be able to exploit these races to escalate privileges. |
| Substance3D - Stager is affected by a Stack-based Buffer Overflow vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Cpanel::JSON::XS versions from 4.33 before 4.80 for Perl accept malformed UTF-8 in bare hash keys under allow_barekey in decode_hv.
With utf8 and allow_barekey, which relaxed enables, a quoted key is validated as UTF-8 but a bare key's bytes are stored as a UTF-8 flagged string without any check. Malformed UTF-8, control bytes and backslashes reach the decoded hash, while malformed UTF-8 and control bytes in a quoted key or a value are rejected.
Later operations on the key, including lc, uc or encoding the hash again, die with a malformed UTF-8 error. |
| Cpanel::JSON::XS versions from 4.33 before 4.80 for Perl miss duplicate non-ASCII bare keys, allowing type confusion under dupkeys_as_arrayref in decode_hv.
With allow_barekey, which relaxed enables, a bare key containing a non-ASCII byte is stored as UTF-8 but looked up as raw bytes, so a repeated key escapes the duplicate-key check and replaces the earlier value.
From 4.41, under dupkeys_as_arrayref, a bare repeat replaces the array that collects a key's values with a plain value, and the next quoted repeat pushes onto that value as if it were an array. A JSON integer there is dereferenced as a pointer.
Untrusted JSON decoded with relaxed and dupkeys_as_arrayref can crash the process or dereference an address chosen by a JSON number. |
| Cpanel::JSON::XS versions from 4.43 before 4.80 for Perl misorder byte-string keys during canonical encoding in utf16_cmp.
canonical sorts keys by UTF-16 code units. When any key in a hash is UTF-8 flagged, every key is decoded as UTF-8 for the comparison, including byte-string keys that the encoder writes out as Latin-1 characters. A byte-string key whose bytes are valid UTF-8 is sorted out of order, and two keys that encode differently can compare equal and are left in hash order.
The same data can encode to different canonical documents across processes. |
| Improper Neutralization of Special Elements Used in a Template Engine and Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Apache Camel HTTP, Netty HTTP, Undertow and Vert.x HTTP components.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.
The Camel HTTP producer families let an inbound message override the endpoint URI through the CamelHttpUri and CamelRestHttpUri headers, and then passed that message-supplied string through CamelContext.resolvePropertyPlaceholders() before using it. Property-placeholder resolution is a configuration-resolution facility, not a URI-parsing step: it reaches operating-system environment variables, JVM system properties, every PropertiesFunction registered on the classpath - including the secret functions - and, through camel-bean, the invocation of a no-argument method on any bean in the registry. Applying it to Exchange content therefore turned a URI string into a configuration- and bean-evaluation context. A route author opted into none of this: a plain static to("http://backend/api") was sufficient. Seven call sites were affected: HttpHelper.createURL and HttpHelper.createMethod in camel-http-common, HttpMethodHelper.createMethod in camel-http, VertxHttpHelper.resolveHttpURI in camel-vertx-http, UndertowHelper.createURL and UndertowHelper.createMethod in camel-undertow, and NettyHttpHelper.createURL in camel-netty-http. The bridgeEndpoint option did not bound the exposure: it suppresses the CamelHttpUri override in the createURL family but not in the createMethod family, so a route using the documented bridging configuration still resolved placeholders taken from the header, and CamelRestHttpUri was consumed before any bridgeEndpoint check in all four components. Only camel-http offered an opt-out, skipControlHeaders, which defaults to false. Reaching the headers did not always require header injection, because several Camel HTTP consumers populate CamelHttpUri from the request line themselves as a documented reverse-proxy feature. An unresolvable placeholder additionally produced a RuntimeExchangeException whose message echoed the URI, which distinguishes a set from an unset configuration key even where no outbound request is made. The behaviour predates the 4.x line. This advisory continues the alignment CAMEL-24282 applied to the toD and enrich dynamic-URI EIPs in 4.22.0, extending the same build-time-resolution contract to the HTTP producer components.
Users should upgrade to version 4.23.0, which fixes the issue. Users on the 4.22.x releases stream should upgrade to 4.22.1. Users on the 4.18.x releases stream should upgrade to 4.18.5. The 4.14.x releases stream and earlier reached end of life before this issue was resolved and will not receive a fix, so deployments on those lines must move to a supported release. For deployments that cannot upgrade immediately, strip the override headers at the trust boundary before the producer with removeHeader("CamelHttpUri") and removeHeader("CamelRestHttpUri"), or set skipControlHeaders=true on camel-http endpoints, which is the only component offering that option. Note that bridgeEndpoint=true is not a workaround: it suppresses the header override when the outbound URL is built but not when the header is re-parsed for the query string. Percent-encoding the placeholder delimiters is likewise not a mitigation for camel-netty-http, whose binding decodes the request path before the value reaches the header, so proxy or WAF rules written against the raw delimiters do not help there. As defence in depth, ensure consumers exposed to untrusted senders apply a strict inbound HeaderFilterStrategy over the Camel namespace, and resolve secrets through a vault rather than through environment variables or system properties that a placeholder can name. |
| Improper Handling of Case Sensitivity vulnerability in Apache Camel Netty HTTP component.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.
The camel-netty-http security constraint compared the request path against the configured context path using a case-sensitive match, while the routing that dispatches the request to the endpoint did not apply the same rule. The two comparisons therefore disagreed for any path whose case differed from the configured value. An external caller could alter the case of a character in a path segment so that the security constraint no longer recognised the path as protected, while the request still dispatched to the same endpoint. The result is that the constraint is skipped and the protected route is reached without satisfying it. No credential, prior access or special configuration is required beyond being able to send a request to the consumer.
Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. The constraint now matches the request path with the same case rules the dispatch uses, so the two can no longer disagree. For deployments that cannot upgrade immediately, place the authorization decision in front of the Camel consumer, for example in a reverse proxy that normalises the request path before forwarding. |
| undici is an HTTP client library for Node.js. In versions 7.15.0 through 7.30.0 and 8.0.0 through 8.12.1, its fetch() implementation verifies Subresource Integrity metadata by matching the algorithm token against a lowercase-only set, even though the SRI specification defines the token by its ASCII-lowercase form, so a valid but non-lowercase token such as an uppercase or mixed-case SHA256 is treated as unknown and skipped. When no recognized algorithm remains, undici treats the integrity list as empty and accepts the response, so a server returning a body that does not match the pinned digest passes the check. An attacker who controls only the response body can therefore deliver attacker-controlled bytes to an application that pinned a valid uppercase or mixed-case SRI token, with no integrity error, affecting response integrity only. The issue is fixed in undici 7.30.1 and 8.12.2, which normalize the algorithm token to ASCII lowercase before validation, and users should upgrade to one of those versions or later. As a workaround, use lowercase algorithm tokens such as sha256, sha384, or sha512 in integrity metadata. |
| Off-by-one error in Microsoft Office Word allows an unauthorized attacker to execute code over a network. |
| RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0, match_value/3 passes the user-supplied ?name= regular expression to re:run with no match_limit option, and executes it once per resource in the result set. OTP's default 10M match_limit caps each call at roughly 100-200ms, but the regex runs once per resource in the result set. With a large set, for example 5000 queues at 150ms each, a single request consumes 12 or more minutes of CPU. Parallel requests saturate the schedulers. The use_regex=true option is a supported feature on list endpoints, so this path is reachable through normal API use. Preconditions include Any user with the management tag can exploit this.. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0. |
| Out-of-bounds read in Microsoft Office PowerPoint allows an unauthorized attacker to disclose information over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/core: Prefer NLA_NUL_STRING
These attributes are evaluated as c-string (passed to strcmp), but
NLA_STRING doesn't check for the presence of a \0 terminator.
Either this needs to switch to nla_strcmp() and needs to adjust printf fmt
specifier to not use plain %s, or this needs to use NLA_NUL_STRING.
As the code has been this way for long time, it seems to me that userspace
does include the terminating nul, even tough its not enforced so far, and
thus NLA_NUL_STRING use is the simpler solution. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86/mmu: Ensure hugepage is in by slot before checking max mapping level
When recovering hugepages in the shadow MMU, verify that the base gfn of
the shadow page is actually contained within the target memslot, *before*
querying the max mapping level given the shadow page's gfn. Failure to
pre-check the validity of the gfn can lead to an out-of-bounds access to
the slot's lpage_info (which typically manifests as a host #PF because the
lpage_info is vmalloc'd) if the guest creates a hugepage mapping (in its
PTEs) that extends "below" the bounds of a memslot.
When faulting in memory for a guest, and the size of the guest mapping is
greater than KVM's (current) max mapping, then KVM will create a "direct"
shadow page (direct in that there are no gPTEs to shadow, and so the target
gfn is a direct calculation given the base gfn of the shadow page). The
hugepage recovery flow looks for such direct shadow pages, as forcing 4KiB
mappings when dirty logging generates the guest > host mapping size case.
When the 4KiB restriction is lifted, then KVM can replace the shadow page
with a hugepage.
But if KVM originally used a smaller mapping than the guest because the
range of memory covered by the guest hugepage exceeds the bounds of a
memslot, then KVM will link a direct shadow page with a gfn that is outside
the bounds of the memslot being used to fault in memory. The rmap entry
added for the leaf mapping is correct and within bounds, but the gfn of the
leaf SPTE's parent shadow page will be out of bounds.
BUG: unable to handle page fault for address: ffffc90000806ffc
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 100000067 P4D 100000067 PUD 1002a7067 PMD 10612f067 PTE 0
Oops: Oops: 0000 [#1] SMP
CPU: 13 UID: 1000 PID: 757 Comm: mmu_stress_test Not tainted 7.1.0-rc1-48ce1e26eace-x86_pir_to_irr_comments-vm #341 PREEMPT
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:kvm_mmu_max_mapping_level+0x79/0x2b0 [kvm]
Call Trace:
<TASK>
kvm_mmu_recover_huge_pages+0x21b/0x320 [kvm]
kvm_set_memslot+0x1ee/0x590 [kvm]
kvm_set_memory_region.part.0+0x3a1/0x4d0 [kvm]
kvm_vm_ioctl+0x9bf/0x15d0 [kvm]
__x64_sys_ioctl+0x8a/0xd0
do_syscall_64+0xb7/0xbb0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7f21c0f1a9bf
</TASK>
Don't bother pre-checking the bounds of the potential hugepage, i.e. don't
check that e.g. sp->gfn + KVM_PAGES_PER_HPAGE(sp->role.level + 1) is also
within the memslot, as the checks performed by kvm_mmu_max_mapping_level()
are a superset of the basic bounds checks. I.e. pre-checking the full
range would be a dubious micro-optimization. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/vce: Prevent partial address patches
In the case that only one of lo/hi is valid, the patching could result
in a bad address written to in FW. |
