| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| There is a lack of XSS escaping in the Spark History Server prior to 3.5.8 which allows a malicious Spark job to generate arbitrary unescaped frontend code which could lead to a minimal privilege escalation in browser. Users are encouraged to upgrade to Spark 3.5.8 or later.
This CVE is marked as "low" since the path to exploit requires both relatively high permissions (ability to launch a Spark job) and requires tricking a user with higher permissions to log in and visit the Spark history web page.
Users are encouraged to upgrade their Spark history servers to Spark 3.5.8 or later. |
| The Grav Form plugin (getgrav/grav-plugin-form) versions 8.0.6 through 9.1.19 select the reCAPTCHA version to validate based solely on which response field key is present in the submitted payload. On a site configured for reCAPTCHA v3, an anonymous attacker can place their v3 token under the v2 field name (g-recaptcha-response instead of token), causing validation to use the v2 branch, which never applies the score threshold or verifies the expected action. This results in a complete bypass of reCAPTCHA v3 bot protection. The issue is fixed in version 9.1.20. |
| In rsync 3.0.1 through 3.4.1, receive_xattr relies on an untrusted length value during a qsort call, leading to a receiver use-after-free. The victim must run rsync with -X (aka --xattrs). On Linux, many (but not all) common configurations are vulnerable. Non-Linux platforms are more widely vulnerable. |
| Files is a module for managing files inside spaces and user profiles. In versions 0.16.9 and below, the File Move functionality does not contain logic that prevents injection of arbitrary JavaScript, which can lead to Browser JS code execution in the context of the user’s session. This is fixed in version 0.16.10. |
| Traefik is an HTTP reverse proxy and load balancer. From 3.7.0 until 3.7.3, there is a high severity vulnerability in Traefik's domain-fronting protection (SNICheck) that allows an unauthenticated client to bypass mutual TLS enforced through wildcard router TLSOptions. When a router uses a wildcard host rule such as Host(*.example.com) with stricter TLS options (for example RequireAndVerifyClientCert), SNICheck resolves the TLS options for the HTTP Host header using exact map lookups only and never applies wildcard matching. If another permissive SNI is served on the same entrypoint, an attacker can complete the TLS handshake under the permissive options and then send an HTTP Host header targeting the wildcard-protected backend, reaching it without presenting a client certificate. This affects the regular HTTPS / HTTP-2 path and does not require HTTP/3. This vulnerability is fixed in 3.7.3. |
| A WebFlux application using functional endpoints and deployed with DispatcherServlet may be vulnerable to a header predicate bypass in a pre-flight request.
Spring Framework 7.0.0 - 7.0.8
Spring Framework 6.2.0 - 6.2.19
Spring Framework 6.1.0 - 6.1.28
Spring Framework 6.0.0 - 6.0.30
Spring Framework 5.3.0 - 5.3.49
Spring Framework 5.2.5.RELEASE - 5.2.25.RELEASE |
| In the Linux kernel, the following vulnerability has been resolved:
mfd: cs42l43: Sanity check firmware size
Currently the code checks if a firmware was received, however it does
not verify that the firmware size is larger than the firmware header. As
the firmware pointer is dereferenced as a pointer to the header
structure this could lead to an out of bounds memory access. Add the
missing check. |
| PrivateBin is an online pastebin where the server has zero knowledge of pasted data. Prior to 2.0.5, AttachmentViewer.setAttachment in js/privatebin.js uses getAttachmentMimeType to accept attacker-controlled MIME types and uses getBlobUrl to create a same-origin blob before setting attachmentLink's href for the Download attachment link. The SVG-only sanitization branch updates only the preview blob, so text/html, image/svg, application/xhtml+xml, and text/xml attachments can remain active in the download blob. On an instance with fileupload = true and a weakened, stripped, or absent Content Security Policy, an anonymous attacker can create such an attachment, and a victim who opens the link in a new tab causes inline JavaScript to execute in the PrivateBin origin. The script can read origin-scoped local storage and issue same-origin requests, including requests to applications co-hosted on the same domain. This issue is fixed in version 2.0.5. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/percpu-km: fix bitmap overflow and accounting in pcpu_create_chunk()
In pcpu_create_chunk(), nr_pages is the total contiguous backing
allocation, i.e., nr_units * pcpu_unit_pages, but pcpu_chunk_populated()
uses it to set chunk->populated, whose size is pcpu_unit_pages, bitmap.
Since bit N in chunk->populated means page offset N inside every unit is
backed. When nr_units > 1, the function writes beyond chunk->populated.
Fix it by using chunk->nr_pages.
It also fixes the global pcpu_nr_empty_pop_pages accounting, since
pcpu_balance_free() only iterates up to chunk->nr_pages.
Commit a63d4ac4ab609 ("percpu: make percpu-km set chunk->populated bitmap
properly") introduced the bitmap overflow issue. Later, commit
b539b87fed37f ("percpu: implmeent pcpu_nr_empty_pop_pages and
chunk->nr_populated") added pcpu_nr_empty_pop_pages and caused the
accounting issue. |
| The default docker image shipped for Venueless did not properly ensure that uploaded SVG files could not be delivered with executable JavaScript content. A valid Content Security Policy is now set. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/test: Fix __fortify_panic
Fix a runtime assertion in setup_xor_mapping(). Fortify complains that it
is potentially overflowing the xormaps array per __counted_by(nr_maps).
Quiet the false positive by initializing @nr_maps earlier.
memcpy: detected buffer overflow: 32 byte write of buffer size 0
WARNING: lib/string_helpers.c:1036 at __fortify_report+0x4d/0xa0, CPU#8: modprobe/2728
Call Trace:
__fortify_panic+0xd/0xf
setup_xor_mapping+0x6c/0xa0 [cxl_translate]
[ dj: Fixed up @nr_entries to @nr_maps in commit log. ] |
| In the Linux kernel, the following vulnerability has been resolved:
spi: spi-qpic-snand: write the feature value before executing SET_FEATURE
qcom_spi_send_cmdaddr() programs NAND_FLASH_CMD/NAND_EXEC_CMD and submits
the descriptors, which makes the controller execute the command
immediately. For SPINAND_SET_FEATURE the value to be written is only
placed into NAND_FLASH_FEATURES afterwards, by qcom_spi_io_op(), in a
second submission - so the chip is programmed with whatever that register
happened to hold from a previous operation, and the intended value is only
applied by the *next* SET_FEATURE.
Measured on a TP-Link Archer AX55 v1 (IPQ5018, ESMT F50L1G41LB): writing
0x40 to the configuration register (0xb0) leaves the chip at 0x00, and the
subsequent write of 0x00 leaves it at 0x40 - every write lands one
operation late.
This stayed unnoticed until v6.18 added SPI-NAND OTP support together
with OTP entries for ESMT chips. spinand_otp_rw() enables OTP mode,
reads, and disables it again, and mtd_otp_nvmem_add() does this during
MTD registration. With the off-by-one, the "disable" write actually
applies the previously requested value, so CFG_OTP_ENABLE ends up set:
the chip stays in OTP mode, every subsequent array read returns the OTP
area instead of the array (UBI reports an empty device) and all writes
fail with -EIO because the OTP area is write protected. On this board
that makes the whole flash unusable and the device unbootable.
Write the feature value into NAND_FLASH_FEATURES as part of the same
transaction, before NAND_EXEC_CMD. While at it, copy only the bytes the
operation actually carries - the previous code dereferenced a 4-byte
pointer on a one-byte buffer (spinand->scratchbuf).
With this patch the flash contents read back bit-identical to a
known-good dump of the same board taken under the vendor firmware
(md5-verified across partitions), and writes work. |
| Improper neutralization of Script-Related HTML tags in a web page (basic XSS) vulnerability in Softtr Informatics Technology Trading Limited Company E-Commerce Pack allows Cross-Site Scripting (XSS).
This issue affects E-Commerce Pack: before 5.03.01.49. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/pseries: papr-phy-attest - validate cmd.length, plug mem leak
In papr_phy_attest_create_handle(), the params->cmd.length is not
validated before use, which can result in a buffer overlow. Check it and
return -EINVAL if it is either 0 or exceeds sizeof(params->cmd).
Also, params is freed on the success path but not error. Free it on
errors after memory allocation. And free it on negative fd. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: synaptics-rmi4 - zero report size on F54 work error
In rmi_f54_work(), if an error occurs during report request or command
verification, the code jumped directly to the 'error' label, bypassing
the 'abort' label where f54->report_size was normally zeroed out.
This left f54->report_size containing its previous successful payload
size. If a user then altered the V4L2 format to a smaller size, and a
subsequent run failed, rmi_f54_buffer_queue() would copy the stale,
larger payload size into the shrunken V4L2 buffer, causing a heap
buffer overflow.
Fix this by merging the 'abort' and 'error' labels into a single 'out'
exit path, and ensuring that f54->report_size is always set to 0 on
failure by checking for error and zeroing the local report_size first. |
| Reliance on Untrusted Inputs in a Security Decision vulnerability in Apache APISIX.
This vulnerability allows an attacker to escalate privilege or perform an authorization bypass by sending certain values that the attach-consumer-label plugin does not sanitise correctly.
This issue affects Apache APISIX: from 3.11.0 through 3.17.0.
Users are recommended to upgrade to version 3.18.0, which fixes the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: misc: usbio: check ibuf_len against rxbuf_len in bulk msg
ibuf_len is the bulk IN (receive) buffer size, but the EMSGSIZE check
in usbio_bulk_msg() compares it against txbuf_len — the bulk OUT
endpoint size. Both are taken independently from different endpoints
in usbio_probe(), so the check is wrong when they differ.
Use rxbuf_len for the IN direction. This matches the buffer that
actually holds the response data. |
| justhtml versions before 1.13.0 contain a cross-site scripting vulnerability in the to_markdown() function when serializing attacker-controlled pre content. Attackers can place backticks inside sanitized pre elements to break out of fixed-length code fences, allowing raw HTML to execute when the generated Markdown is rendered by CommonMark or GFM-style renderers. |
| Mitigation bypass in the Safe Browsing component. This vulnerability was fixed in Firefox 154, Firefox ESR 140.14, Firefox ESR 153.1, Thunderbird 154, Thunderbird 140.14, and Thunderbird 153.1. |
| Mitigation bypass in the Storage: Cache API component. This vulnerability was fixed in Firefox 154, Firefox ESR 140.14, Firefox ESR 153.1, Thunderbird 154, Thunderbird 140.14, and Thunderbird 153.1. |
