| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| For untrusted certificates that contain the "Authority Information Access - caIssuers URI" extension, Szafir SDK will automatically download the parent CA certificate from the specified URL and will import it to its trust store as a "nonqualified" certificate. In such a case, Szafir SDK returns a success status code of 0 ("Positively verified") upon successful cryptographic verification and a certificate status of "nonqualified".
For other types of untrusted certificates, Szafir SDK returns a success status code of 0 ("Positively verified") upon successful cryptographic verification and a certificate status of "nondetermined".
This may lead integrating applications to incorrectly treat the digital signature as valid despite an untrusted certificate chain. This flaw enables authentication bypass and user impersonation:
(1) in use-cases other than qualified certificate authentication, or
(2) if the qualified certificate authentication use-case is not correctly implemented by the integrating application.
This issue was fixed in version 1.8.463.2. |
| JGraphT Core v1.5.2 was discovered to contain a NullPointerException via the component org.jgrapht.alg.util.ToleranceDoubleComparator::compare(Double, Double). NOTE: this is disputed by multiple third parties who believe there was not reasonable evidence to determine the existence of a vulnerability. The submission may have been based on a tool that is not sufficiently robust for vulnerability identification. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/mincore: handle non-swap entries before !CONFIG_SWAP guard
mincore_swap() also fields migration/hwpoison entries (and shmem
swapin-error entries), which can exist on !CONFIG_SWAP builds when
CONFIG_MIGRATION or CONFIG_MEMORY_FAILURE is enabled. The
!IS_ENABLED(CONFIG_SWAP) guard ran before the non-swap-entry early return,
so mincore_pte_range() can spuriously WARN and report these pages
nonresident on !CONFIG_SWAP kernels.
Move the guard below the non-swap-entry check so only true swap entries
trip the WARN, and migration/hwpoison entries take the existing "uptodate
/ non-shmem" path. |
| Detection of Error Condition Without Action vulnerability in Apache Tomcat when configuring CRLs for a FFM based connector.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.22, from 10.1.0-M7 through 10.1.55, from 9.0.83 through 9.0.118.
Users are recommended to upgrade to version 11.0.23, 10.1.56 or 9.0.119, which fixes the issue. |
| A flaw was found in rsync. It could allow a server to enumerate the contents of an arbitrary file from the client's machine. This issue occurs when files are being copied from a client to a server. During this process, the rsync server will send checksums of local data to the client to compare with in order to determine what data needs to be sent to the server. By sending specially constructed checksum values for arbitrary files, an attacker may be able to reconstruct the data of those files byte-by-byte based on the responses from the client. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-tcp: propagate nvmet_tcp_build_pdu_iovec() errors to its callers
Currently, when nvmet_tcp_build_pdu_iovec() detects an out-of-bounds
PDU length or offset, it triggers nvmet_tcp_fatal_error(cmd->queue)
and returns early. However, because the function returns void, the
callers are entirely unaware that a fatal error has occurred and
that the cmd->recv_msg.msg_iter was left uninitialized.
Callers such as nvmet_tcp_handle_h2c_data_pdu() proceed to blindly
overwrite the queue state with queue->rcv_state = NVMET_TCP_RECV_DATA
Consequently, the socket receiving loop may attempt to read incoming
network data into the uninitialized iterator.
Fix this by shifting the error handling responsibility to the callers. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: hda/conexant: Fix missing error check for jack detection
In cx_probe(), the return value of snd_hda_jack_detect_enable_callback()
is ignored. This function returns a pointer, and if it fails (e.g., due
to memory allocation failure), it returns an error pointer which must
be checked using IS_ERR().
If the registration fails, the driver continues to probe, but the jack
detection callback will not be registered. This can lead to a kernel
crash later when the driver attempts to handle jack events or accesses
the uninitialized structure.
Check the return value using IS_ERR() and propagate the error via
PTR_ERR() to the probe caller. |
| Out-of-bounds write in the Renesas TSIP TLS 1.3 transcript buffer. In tsip_StoreMessage() the capacity check guarding the fixed message bag (MSGBAG_SIZE) sets an error code but fails to return, so execution falls through to an XMEMCPY that writes past the end of the buffer once the accumulated TLS 1.3 handshake transcript exceeds MSGBAG_SIZE (8 KB), corrupting adjacent heap state and potentially causing a remote denial of service crash. The bag is sized to hold a normal handshake, so this is reached only by an unusually large but valid certificate chain, or by a malicious or man-in-the-middle server sending an oversized handshake message to a client that does not strictly verify the chain. This only affects builds using the Renesas TSIP TLS port (WOLFSSL_RENESAS_TSIP_TLS) as a TLS 1.3 client on Renesas MCUs with TSIP hardware enabled, and is rated High within those builds. All other configurations are unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: Fix error pointer dereference
The variable tps->partner is checked for an error pointer and then if it
is, it sends an error message but does not return and then immediately
dereferenced a few lines below:
tps->partner = typec_register_partner(tps->port, &desc);
if (IS_ERR(tps->partner))
dev_warn(tps->dev, "%s: failed to register partnet\n", __func__);
if (desc.identity) {
typec_partner_set_identity(tps->partner);
cd321x->cur_partner_identity = st.partner_identity;
}
Add early return and fix spelling mistake in error message.
Detected by Smatch:
drivers/usb/typec/tipd/core.c:827 cd321x_update_work() error:
'tps->partner' dereferencing possible ERR_PTR() |
| picklescan before 0.0.27 contains a parsing logic error in the _list_globals function when handling STACK_GLOBAL opcodes, failing to track arguments in the correct range and allowing malicious pickle files to bypass detection. Attackers can craft pickle files with arguments at position zero to trigger unexpected exceptions and evade security scanning. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix invalid leaf access in btrfs_quota_enable() if ref key not found
If btrfs_search_slot_for_read() returns 1, it means we did not find any
key greater than or equals to the key we asked for, meaning we have
reached the end of the tree and therefore the path is not valid. If
this happens we need to break out of the loop and stop, instead of
continuing and accessing an invalid path. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/gem: fix error handling in msm_ioctl_gem_info_get_metadata()
msm_ioctl_gem_info_get_metadata() always returns 0 regardless of
errors. When copy_to_user() fails or the user buffer is too small,
the error code stored in ret is ignored because the function
unconditionally returns 0. This causes userspace to believe the
ioctl succeeded when it did not.
Additionally, kmemdup() can return NULL on allocation failure, but
the return value is not checked. This leads to a NULL pointer
dereference in the subsequent copy_to_user() call.
Add the missing NULL check for kmemdup() and return ret instead of 0.
Note that the SET counterpart (msm_ioctl_gem_info_set_metadata)
correctly returns ret.
Patchwork: https://patchwork.freedesktop.org/patch/714478/ |
| Windows Hyper-V Remote Code Execution Vulnerability |
| When an affected product receives a valid CIP message from an unauthorized or unintended source to Port 2222/TCP, Port 2222/UDP, Port 44818/TCP, or Port 44818/UDP that instructs the CPU to stop logic execution and enter a fault state, a DoS can occur. This situation could cause loss of availability and a disruption of communication with other connected devices.
Rockwell Automation EtherNet/IP products; 1756-ENBT, 1756-EWEB, 1768-ENBT, and 1768-EWEB communication modules; CompactLogix L32E and L35E controllers; 1788-ENBT FLEXLogix adapter; 1794-AENTR FLEX I/O EtherNet/IP adapter; ControlLogix 18 and earlier; CompactLogix 18 and earlier; GuardLogix 18 and earlier; SoftLogix 18 and earlier; CompactLogix controllers 19 and earlier; SoftLogix controllers 19 and earlier; ControlLogix controllers 20 and earlier; GuardLogix controllers 20 and earlier; and MicroLogix 1100 and 1400 |
| In updateState of GraphicsDriverEnableAngleAsSystemDriverController.java, there is a possible persistent dos issue due to an unusual root cause. This could lead to local denial of service with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SVM: Inject #UD for INVLPGA if EFER.SVME=0
INVLPGA should cause a #UD when EFER.SVME is not set. Add a check to
properly inject #UD when EFER.SVME=0.
[sean: tag for stable@] |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: unset conn->binding on failed binding request
When a multichannel SMB2_SESSION_SETUP request with
SMB2_SESSION_REQ_FLAG_BINDING fails ksmbd sets conn->binding = true
but never clears it on the error path. This leaves the connection in
a binding state where all subsequent ksmbd_session_lookup_all() calls
fall back to the global sessions table. This fix it by clearing
conn->binding = false in the error path. |
| IBM WebSphere Application Server - Liberty 19.0.0.7 through 26.0.0.5 and IBM WebSphere Application Server 9.0, and 8.5 and WebSphere Application Server Liberty are vulnerable to a denial of service, caused by sending a specially-crafted request. A remote attacker could exploit this vulnerability to cause the server to consume memory resources. |
| The kex_input_kexinit function in kex.c in OpenSSH 6.x and 7.x through 7.3 allows remote attackers to cause a denial of service (memory consumption) by sending many duplicate KEXINIT requests. NOTE: a third party reports that "OpenSSH upstream does not consider this as a security issue." |
| pam_usb provides hardware authentication for Linux using ordinary removable media. Prior to 0.9.1, src/evdev.c silently ignores EACCES errors when opening /dev/input/event* nodes, causing pusb_has_virtual_input_device() to return 0 (no virtual devices found) even when every open() call failed due to insufficient permissions. The caller in src/local.c cannot distinguish a clean absence of virtual devices from a permission-denied scan, and acts on the false negative by continuing authentication without denying. This vulnerability is fixed in 0.9.1. |
