| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the hardware-based SSL/TLS cryptography functionality of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software for Cisco Firepower 2100 Series Appliances could allow an unauthenticated, remote attacker to cause an affected device to reload unexpectedly, resulting in a denial of service (DoS) condition.
This vulnerability is due to an implementation error within the cryptographic functions for SSL/TLS traffic processing when they are offloaded to the hardware. An attacker could exploit this vulnerability by sending a crafted stream of SSL/TLS traffic to an affected device. A successful exploit could allow the attacker to cause an unexpected error in the hardware-based cryptography engine, which could cause the device to reload. |
| A vulnerability in the IPv6 DHCP (DHCPv6) client module of Cisco Adaptive Security Appliance (ASA) Software, Cisco Firepower Threat Defense (FTD) Software, Cisco IOS Software, and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient validation of DHCPv6 messages. An attacker could exploit this vulnerability by sending crafted DHCPv6 messages to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. Note: To successfully exploit this vulnerability, the attacker would need to either control the DHCPv6 server or be in a man-in-the-middle position. |
| A vulnerability in the handling of RSA keys on devices running Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to retrieve an RSA private key. This vulnerability is due to a logic error when the RSA key is stored in memory on a hardware platform that performs hardware-based cryptography. An attacker could exploit this vulnerability by using a Lenstra side-channel attack against the targeted device. A successful exploit could allow the attacker to retrieve the RSA private key. The following conditions may be observed on an affected device: This vulnerability will apply to approximately 5 percent of the RSA keys on a device that is running a vulnerable release of Cisco ASA Software or Cisco FTD Software; not all RSA keys are expected to be affected due to mathematical calculations applied to the RSA key. The RSA key could be valid but have specific characteristics that make it vulnerable to the potential leak of the RSA private key. If an attacker obtains the RSA private key, they could use the key to impersonate a device that is running Cisco ASA Software or Cisco FTD Software or to decrypt the device traffic. See the Indicators of Compromise section for more information on the detection of this type of RSA key. The RSA key could be malformed and invalid. A malformed RSA key is not functional, and a TLS client connection to a device that is running Cisco ASA Software or Cisco FTD Software that uses the malformed RSA key will result in a TLS signature failure, which means a vulnerable software release created an invalid RSA signature that failed verification. If an attacker obtains the RSA private key, they could use the key to impersonate a device that is running Cisco ASA Software or Cisco FTD Software or to decrypt the device traffic. |
| Multiple vulnerabilities in the per-user-override feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass a configured access control list (ACL) and allow traffic that should be denied to flow through an affected device. These vulnerabilities are due to a logic error that could occur when the affected software constructs and applies per-user-override rules. An attacker could exploit these vulnerabilities by connecting to a network through an affected device that has a vulnerable configuration. A successful exploit could allow the attacker to bypass the interface ACL and access resources that would should be protected. |
| A vulnerability in the SSL/TLS client of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device.
This vulnerability is due to improper memory management when a device initiates SSL/TLS connections. An attacker could exploit this vulnerability by ensuring that the device will connect to an SSL/TLS server that is using specific encryption parameters. A successful exploit could allow the attacker to cause the affected device to unexpectedly reload, resulting in a DoS condition. |
| A vulnerability in the Secure Sockets Layer (SSL) VPN functionality of the Cisco Adaptive Security Appliance (ASA) Software could allow an unauthenticated, remote attacker to cause a reload of the affected system or to remotely execute code. The vulnerability is due to an attempt to double free a region of memory when the webvpn feature is enabled on the Cisco ASA device. An attacker could exploit this vulnerability by sending multiple, crafted XML packets to a webvpn-configured interface on the affected system. An exploit could allow the attacker to execute arbitrary code and obtain full control of the system, or cause a reload of the affected device. This vulnerability affects Cisco ASA Software that is running on the following Cisco products: 3000 Series Industrial Security Appliance (ISA), ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, ASA 1000V Cloud Firewall, Adaptive Security Virtual Appliance (ASAv), Firepower 2100 Series Security Appliance, Firepower 4110 Security Appliance, Firepower 9300 ASA Security Module, Firepower Threat Defense Software (FTD). Cisco Bug IDs: CSCvg35618. |
| A vulnerability in ICMPv6 processing of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. This vulnerability is due to improper processing of ICMPv6 messages. An attacker could exploit this vulnerability by sending crafted ICMPv6 messages to a targeted Cisco ASA or FTD system with IPv6 enabled. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. |
| A vulnerability in the remote access VPN feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper handling of HTTPS requests. An attacker could exploit this vulnerability by sending crafted HTTPS requests to an affected system. A successful exploit could allow the attacker to cause resource exhaustion, resulting in a DoS condition. |
| A vulnerability in the AnyConnect SSL VPN feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker to send packets with another VPN user's source IP address. This vulnerability is due to improper validation of the packet's inner source IP address after decryption. An attacker could exploit this vulnerability by sending crafted packets through the tunnel. A successful exploit could allow the attacker to send a packet impersonating another VPN user's IP address. It is not possible for the attacker to receive return packets. |
| A vulnerability in the remote access VPN feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to conduct a brute force attack in an attempt to identify valid username and password combinations or an authenticated, remote attacker to establish a clientless SSL VPN session with an unauthorized user.
This vulnerability is due to improper separation of authentication, authorization, and accounting (AAA) between the remote access VPN feature and the HTTPS management and site-to-site VPN features. An attacker could exploit this vulnerability by specifying a default connection profile/tunnel group while conducting a brute force attack or while establishing a clientless SSL VPN session using valid credentials. A successful exploit could allow the attacker to achieve one or both of the following:
Identify valid credentials that could then be used to establish an unauthorized remote access VPN session.
Establish a clientless SSL VPN session (only when running Cisco ASA Software Release 9.16 or earlier).
Notes:
Establishing a client-based remote access VPN tunnel is not possible as these default connection profiles/tunnel groups do not and cannot have an IP address pool configured.
This vulnerability does not allow an attacker to bypass authentication. To successfully establish a remote access VPN session, valid credentials are required, including a valid second factor if multi-factor authentication (MFA) is configured.
Cisco will release software updates that address this vulnerability. There are workarounds that address this vulnerability. |
| A vulnerability in a legacy capability that allowed for the preloading of VPN clients and plug-ins and that has been available in Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to execute arbitrary code with root-level privileges. Administrator-level privileges are required to exploit this vulnerability.
This vulnerability is due to improper validation of a file when it is read from system flash memory. An attacker could exploit this vulnerability by copying a crafted file to the disk0: file system of an affected device. A successful exploit could allow the attacker to execute arbitrary code on the affected device after the next reload of the device, which could alter system behavior. Because the injected code could persist across device reboots, Cisco has raised the Security Impact Rating (SIR) of this advisory from Medium to High. |
| A vulnerability in the LUA interperter of the Remote Access SSL VPN feature of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Secure Firewall Threat Defense (FTD) Software could allow an authenticated, remote attacker with a valid VPN connection to cause the device to reload unexpectedly, resulting in a denial of service (DoS) condition. This does not affect the management or MUS interfaces.
This vulnerability is due to trusting user input without validation in the LUA interprerter. An attacker could exploit this vulnerability by sending crafted HTTP packets to the Remote Access SSL VPN server. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. |
| A vulnerability in the Simple Network Management Protocol version 3 (SNMPv3) access control functionality of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to query SNMP data. This vulnerability is due to ineffective access control. An attacker could exploit this vulnerability by sending an SNMPv3 query to an affected device from a host that is not permitted by the SNMPv3 access control list. A successful exploit could allow the attacker to send an SNMP query to an affected device and retrieve information from the device. The attacker would need valid credentials to perform the SNMP query. |
| A vulnerability in the activation of an access control list (ACL) on Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass the protection that is offered by a configured ACL on an affected device. This vulnerability is due to a logic error that occurs when an ACL changes from inactive to active in the running configuration of an affected device. An attacker could exploit this vulnerability by sending traffic through the affected device that should be denied by the configured ACL. The reverse condition is also true—traffic that should be permitted could be denied by the configured ACL. A successful exploit could allow the attacker to bypass configured ACL protections on the affected device, allowing the attacker to access trusted networks that the device might be protecting. Note: This vulnerability applies to both IPv4 and IPv6 traffic as well as dual-stack ACL configurations in which both IPv4 and IPv6 ACLs are configured on an interface. |
| A vulnerability in the VPN web client services component of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to conduct browser-based attacks against users of an affected device. This vulnerability is due to improper validation of input that is passed to the VPN web client services component before being returned to the browser that is in use. An attacker could exploit this vulnerability by persuading a user to visit a website that is designed to pass malicious requests to a device that is running Cisco ASA Software or Cisco FTD Software and has web services endpoints supporting VPN features enabled. A successful exploit could allow the attacker to reflect malicious input from the affected device to the browser that is in use and conduct browser-based attacks, including cross-site scripting attacks. The attacker could not directly impact the affected device. |
| A vulnerability in the CLI of Cisco FXOS Software and Cisco UCS Manager Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system (OS). The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by including crafted arguments to specific commands. A successful exploit could allow the attacker to execute arbitrary commands on the underlying OS with the privileges of the currently logged-in user for all affected platforms excluding Cisco UCS 6400 Series Fabric Interconnects. On Cisco UCS 6400 Series Fabric Interconnects, the injected commands are executed with root privileges. |
| A vulnerability in the memory management of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper resource management when connection rates are high. An attacker could exploit this vulnerability by opening a significant number of connections on an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. |
| Multiple vulnerabilities in the per-user-override feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass a configured access control list (ACL) and allow traffic that should be denied to flow through an affected device. These vulnerabilities are due to a logic error that could occur when the affected software constructs and applies per-user-override rules. An attacker could exploit these vulnerabilities by connecting to a network through an affected device that has a vulnerable configuration. A successful exploit could allow the attacker to bypass the interface ACL and access resources that would should be protected. |
| A vulnerability in the VPN web client services feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a browser that is accessing an affected device. This vulnerability is due to improper validation of user-supplied input to application endpoints. An attacker could exploit this vulnerability by persuading a user to follow a link designed to submit malicious input to the affected application. A successful exploit could allow the attacker to execute arbitrary HTML or script code in the browser in the context of the web services page. |
| A vulnerability in the secure boot implementation of Cisco Secure Firewalls 3100 Series that are running Cisco Adaptive Security Appliance (ASA) Software or Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated attacker with physical access to the device to bypass the secure boot functionality.
This vulnerability is due to a logic error in the boot process. An attacker could exploit this vulnerability by injecting malicious code into a specific memory location during the boot process of an affected device. A successful exploit could allow the attacker to execute persistent code at boot time and break the chain of trust. |
