| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
hdlc_ppp: sync per-proto timers before freeing hdlc state
Each PPP control protocol (LCP/IPCP/IPV6CP) embedded in struct ppp
registers a timer via timer_setup(). That struct ppp is the
hdlc->state allocation, which detach_hdlc_protocol() frees with kfree()
in both teardown paths: unregister_hdlc_device() and the re-attach inside
attach_hdlc_protocol().
The ppp proto never registered a .detach callback, so
detach_hdlc_protocol() performs no timer synchronization before the
kfree(). The only cancel, timer_delete(&proto->timer) in ppp_cp_event(),
is partial (it does not wait for a running callback) and only runs on the
->CLOSED transition; ppp_stop()/ppp_close() do not sync either. A
ppp_timer callback already executing (blocked on ppp->lock) survives the
kfree and then dereferences proto->state / ppp->lock in freed memory,
leading to a use-after-free.
Fix this by adding a .detach helper that calls timer_shutdown_sync() on
every per-proto timer. detach_hdlc_protocol() invokes proto->detach(dev)
before kfree(hdlc->state), so timer_shutdown_sync()
now runs on both free paths.
timer_shutdown_sync() is used instead of timer_delete_sync() because the
keepalive path re-arms the timer through add_timer()/mod_timer() and
shutdown blocks any re-activation during teardown.
Initialize the per-protocol timers in ppp_ioctl() when the protocol is
attached, and remove the now-redundant timer_setup() from ppp_start(), so
that the timers are initialized exactly once at attach time and
ppp_timer_release() never operates on uninitialized timer_list
structures. attach_hdlc_protocol() uses kmalloc() (not kzalloc), so
struct ppp's protos[i].timer is uninitialized garbage until the first
timer_setup(); without this init-at-attach, attaching the PPP protocol
without ever bringing the device up would leave timer_shutdown_sync()
operating on uninitialized memory in .detach. Moving the init out of
ppp_start() (which only runs on NETDEV_UP) into the attach path makes the
initialization unconditional and avoids initializing the same timer_list
twice.
This bug was found by static analysis. |
| In the Linux kernel, the following vulnerability has been resolved:
rpmsg: char: Fix use-after-free on probe error path
rpmsg_chrdev_probe() stores the newly allocated eptdev in the default
endpoint's priv pointer before calling rpmsg_chrdev_eptdev_add(). If
rpmsg_chrdev_eptdev_add() then fails, its error path frees eptdev while
the default endpoint may still dispatch callbacks with the stale priv
pointer.
Avoid publishing eptdev through the default endpoint until
rpmsg_chrdev_eptdev_add() succeeds. Messages received before the priv
pointer is published should be ignored by rpmsg_ept_cb(). Flow-control
updates can hit rpmsg_ept_flow_cb() in the same window, so make both
callbacks return success when priv is NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
writeback: Fix use after free in inode_switch_wbs_work_fn()
inode_switch_wbs_work_fn() has a loop like:
wb_get(new_wb);
while (1) {
list = llist_del_all(&new_wb->switch_wbs_ctxs);
/* Nothing to do? */
if (!list)
break;
... process the items ...
}
Now adding of items to the list looks like:
wb_queue_isw()
if (llist_add(&isw->list, &wb->switch_wbs_ctxs))
queue_work(isw_wq, &wb->switch_work);
Because inode_switch_wbs_work_fn() loops when processing isw items, it
can happen that wb->switch_work is pending while wb->switch_wbs_ctxs is
empty. This is a problem because in that case wb can get freed (no isw
items -> no wb reference) while the work is still pending causing
use-after-free issues.
We cannot just fix this by cancelling work when freeing wb because that
could still trigger problematic 0 -> 1 transitions on wb refcount due to
wb_get() in inode_switch_wbs_work_fn(). It could be all handled with
more careful code but that seems unnecessarily complex so let's avoid
that until it is proven that the looping actually brings practical
benefit. Just remove the loop from inode_switch_wbs_work_fn() instead.
That way when wb_queue_isw() queues work, we are guaranteed we have
added the first item to wb->switch_wbs_ctxs and nobody is going to
remove it (and drop the wb reference it holds) until the queued work
runs. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp - Fix dereferencing uninitialized error pointer
Fix below smatch warnings:
drivers/crypto/ccp/sev-dev.c:1312 __sev_platform_init_locked()
error: we previously assumed 'error' could be null |
| Information disclosure due to uninitialized memory in the Graphics: WebGPU component. This vulnerability was fixed in Firefox 153 and Thunderbird 153. |
| Information disclosure due to uninitialized memory in the Graphics: WebGPU component. This vulnerability was fixed in Firefox 153 and Thunderbird 153. |
| ForgeCode (tailcallhq/forgecode), an AI pair-programming CLI, automatically loads and executes the MCP servers defined in a repository's .mcp.json file on startup without user confirmation. A malicious repository can supply a crafted .mcp.json whose mcpServers entries specify arbitrary command and args values (for example, command: bash with args: ['-c', 'touch /tmp/pwned']). When a user runs the forge CLI inside a cloned untrusted repository, the specified commands are spawned with the invoking user's privileges, resulting in arbitrary code execution. This provides a reliable initial-access and persistence primitive against developers who evaluate untrusted repositories with ForgeCode. |
| Invalid pointer in the DOM: Bindings (WebIDL) component. This vulnerability was fixed in Firefox 153, Firefox ESR 115.38, Firefox ESR 140.13, Thunderbird 153, and Thunderbird 140.13. |
| Sandbox escape due to use-after-free in the DOM: Navigation component. This vulnerability was fixed in Firefox 153, Firefox ESR 115.38, Firefox ESR 140.13, Thunderbird 153, and Thunderbird 140.13. |
| Use-after-free in the WebRTC: Audio/Video component. This vulnerability was fixed in Firefox 153, Firefox ESR 140.13, Thunderbird 153, and Thunderbird 140.13. |
| PraisonAI is a multi-agent teams system. The v4.6.32 chokepoint refactor (which patched CVE-2026-44334 / GHSA-xcmw-grxf-wjhj) added the PRAISONAI_ALLOW_LOCAL_TOOLS env-var gate to the tool_override.py sinks. However, two additional spec.loader.exec_module call sites in praisonai/agents_generator.py were missed and remain completely unguarded in versions prior to 4.6.40. Both functions accept a module_path parameter sourced from YAML configuration and execute it without validation, signature checking, or the env-var gate. Version 4.6.40 fixes the issue. |
| Langflow exec_globals Inclusion of Functionality from Untrusted Control Sphere Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Langflow. Authentication is not required to exploit this vulnerability.
The specific flaw exists within the handling of the exec_globals parameter provided to the validate endpoint. The issue results from the inclusion of a resource from an untrusted control sphere. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-27325. |
| Mailpit is an email testing tool and API for developers. Prior to version 1.30.0, the mailpit dump --http <base-url> <out-dir> sub-command downloads every message from a remote Mailpit instance and writes each one as <id>.eml inside the user-supplied output directory. The message ID field is taken verbatim from the JSON response of the remote server and concatenated into the output path with path.Join, which silently normalizes `..` segments. A malicious HTTP server impersonating Mailpit can therefore make mailpit dump write attacker-controlled bytes to any path the running user can write, fully outside the intended output directory. Version 1.30.0 contains a patch. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: mt6359: fix unchecked return value in mt6358_read_imp
In mt6358_read_imp(), the variable val_v is passed to regmap_read()
but the return value is not checked. If the read fails, val_v remains
uninitialized and its random stack content is subsequently reported
as a measurement result.
Initialize val_v to zero to ensure a predictable value is reported
in case of bus failure and to prevent potential stack data leakage.
This also satisfies static analyzers that might otherwise flag the
variable as used uninitialized. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: Fix data-race on iso_pi fields in hci_get_route calls
iso_connect_bis(), iso_connect_cis(), iso_listen_bis(), and
iso_conn_big_sync() call hci_get_route() using iso_pi(sk)->dst,
iso_pi(sk)->src, and iso_pi(sk)->src_type without holding lock_sock().
These fields may be modified concurrently by connect() or setsockopt()
on the same socket, resulting in data-races reported by KCSAN.
Fix this by snapshotting the required fields under lock_sock() before
calling hci_get_route().
BUG: KCSAN: data-race in memcmp+0x45/0xb0
race at unknown origin, with read to 0xffff8880122135cf of 1 bytes
by task 333 on cpu 1:
memcmp+0x45/0xb0
hci_get_route+0x27e/0x490
iso_connect_cis+0x4c/0xa10
iso_sock_connect+0x60e/0xb30
__sys_connect_file+0xbd/0xe0
__sys_connect+0xe0/0x110
__x64_sys_connect+0x40/0x50
x64_sys_call+0xcad/0x1c60
do_syscall_64+0x133/0x590
entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| Meshtastic is an open source mesh networking solution. Prior to version 2.7.21.1370b23, the Meshtastic GitHub repository's main_matrix.yml workflow is triggered by pull_request_target and multiple jobs check out the attacker's fork code and execute it with access to repository secrets and elevated GITHUB_TOKEN permissions. No approval gate exists. Pull requests from external users with author_association: "NONE" triggered the CI workflow automatically. The workflow directly executes attacker-controlled files from the fork checkout. This issue could have resulted in supply chain compromise, self-hosted runner compromise, and/or repository takeover for the repo. This issue is separate from GHSA-6mwm-v2vv-pp96, which addressed a command injection via github.head_ref in the setup job of the same workflow. That fix correctly moved to environment variables. However, the more critical fork checkout vulnerability across the check, build, and build-debian-src jobs was not addressed. Version 2.7.21.1370b23 contains a patch for thie issue. |
| A security vulnerability has been detected in Sipeed PicoClaw up to 0.2.9. Affected is the function NewContextBuilder of the file pkg/agent/context.go. Such manipulation leads to inclusion of functionality from untrusted control sphere. The attack needs to be performed locally. The exploit has been disclosed publicly and may be used. The reported GitHub issue was closed automatically with the label "not planned" by a bot. |
| Microsoft Streaming Service Elevation of Privilege Vulnerability |
| Windows Kernel-Mode Driver Elevation of Privilege Vulnerability |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: Clear wcid pointer in mt7996_mac_sta_deinit_link()
Clear WCID pointer removing the sta link in mt7996_mac_sta_deinit_link
routine. |
