| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability has been found in OAID Tengine up to 1.12.0. This vulnerability affects the function get_tm_file_model of the file source/serializer/tmfile/tm2_serializer.c of the component tmfile Model Loader. Such manipulation of the argument offset_root leads to out-of-bounds read. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| A flaw has been found in Edimax BR-6208AC 1.32. Affected by this issue is some unknown functionality of the file /goform/formWlSiteSurvey. This manipulation of the argument ifname causes buffer overflow. Remote exploitation of the attack is possible. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way. This vulnerability only affects products that are no longer supported by the maintainer. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: account for fraggap on the paged allocation path
In __ip6_append_data(), when the paged-allocation branch is taken
(MSG_MORE / NETIF_F_SG / large fraglen), alloclen and pagedlen are
computed as
alloclen = fragheaderlen + transhdrlen;
pagedlen = datalen - transhdrlen;
datalen already includes fraggap (datalen = length + fraggap). When
fraggap is non-zero, this is not the first skb and transhdrlen is zero.
The fraggap bytes carried over from the previous skb are copied just past
the fragment headers in the new skb's linear area. The linear area is
therefore undersized by fraggap bytes while pagedlen is overstated by the
same amount, and the copy writes past skb->end into the trailing
skb_shared_info.
An unprivileged user can trigger this via a UDPv6 socket using
MSG_MORE together with MSG_SPLICE_PAGES.
The bad accounting was introduced by commit 773ba4fe9104 ("ipv6:
avoid partial copy for zc"). Before commit ce650a166335 ("udp6: Fix
__ip6_append_data()'s handling of MSG_SPLICE_PAGES"), the negative
copy value caused -EINVAL to be returned. That later commit allowed
MSG_SPLICE_PAGES to proceed in this case, making the corruption
triggerable.
The non-paged branch sets alloclen to fraglen, which already accounts
for fraggap because datalen does. Bring the paged branch in line by
adding fraggap to alloclen and subtracting it from pagedlen.
After this adjustment, copy no longer collapses to -fraggap on the
paged path, so remove the stale comment describing that old arithmetic.
Since a negative copy is no longer expected for a valid MSG_SPLICE_PAGES
case, remove the MSG_SPLICE_PAGES exception from the negative copy check. |
| A flaw was found in libtiff. A remote attacker could exploit this vulnerability by providing a specially crafted PixarLog-compressed TIFF image. This issue occurs when decoding Pixarlog codec images with the PIXARLOGDATAFMT_8BITABGR output format and a specific stride value, leading to a heap-based buffer overflow. This could potentially result in arbitrary code execution or a denial of service (DoS). |
| In the Linux kernel, the following vulnerability has been resolved:
s390/zcrypt: Improve CCA CPRB length and overflow checks
The xcrb_msg_to_type6cprb_msgx() function lacks proper input
validation, creating security vulnerabilities:
1. Integer overflow after CEIL4 alignment: Signed int variables could
overflow during 4-byte boundary alignment, causing undersized
buffer allocations or incorrect bounds checking.
2. Missing minimum size validation: The CPRBX structure is copied from
userspace without verifying sufficient buffer length. Undersized
buffers cause uninitialized memory access when reading structure
fields like cprbx.cprb_len and cprbx.domain.
3. Arithmetic overflow in sum calculations: Adding control block and
data block sizes could overflow, bypassing size checks and enabling
buffer overflows.
Fix by using size_t for length calculations, adding U32_MAX boundary
checks after alignment, validating minimum control block size before
copying from userspace, and detecting sum calculation overflows. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/zcrypt: Improve EP11 CPRB length and overflow checks
The xcrb_msg_to_type6_ep11cprb_msgx() function lacks proper input
validation, creating security vulnerabilities:
1. Missing minimum size validation: The ep11_cprb structure and
subsequent payload fields (pld_tag, pld_lenfmt) are copied from
userspace without verifying sufficient buffer length.
2. Arithmetic overflow in length calculations: CEIL4 alignment could
overflow, bypassing size checks and enabling buffer overflows.
3. The payload is asn1 encoded but the function just uses a simple c
struct overlay to access some fields of the payload.
Fix by using size_t for length calculations, adding U32_MAX boundary
checks after alignment, and validating minimum request size and
minimum reply size before copying from userspace. Do a very simple
asn1 parsing of the payload up to the function value field. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: bound S1G TIM PVB walk to the TIM element
ieee80211_s1g_check_tim() parses the S1G Partial Virtual Bitmap (PVB) of a
received TIM element. The TIM is handed in as the element payload:
ieee802_11_parse_elems_full() stores elems->tim = elem->data and
elems->tim_len = elem->datalen (net/mac80211/parse.c), so the valid bytes
are [tim, tim + tim_len).
When walking the encoded blocks the function passes the walker an end
sentinel of (const u8 *)tim + tim_len + 2, i.e. two bytes past the end of
the element. ieee80211_s1g_find_target_block() loops while (ptr + 1 <= end)
and dereferences ptr (and the per-mode ieee80211_s1g_len_*() helpers read
*ptr), so it can read up to two bytes beyond the TIM element -- an
out-of-bounds read of adjacent skb/heap data when the TIM is the last
element in the frame. The +2 appears to account for the element id/len
header, but tim already points past that header at the element payload, so
the addend is wrong.
Pass the correct element end, (const u8 *)tim + tim_len. |
| Out-of-bounds read vulnerability in Citirx Citrix Workspace app for Windows.
This issue affects Citrix Workspace app for Windows: before 2603.20 CR, before LTSR 2607, and before LTSR 2507 CU3. |
| Heap-based buffer overflow in Microsoft Office Excel allows an unauthorized attacker to execute code over a network. |
| A vulnerability has been found in Netcore NR268 1.7.121109. This affects the function filter_arp_put_file_cgi of the file /router/filter_arp_put_file.cgi. The manipulation of the argument put_file leads to out-of-bounds read. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Tinyexr through 3.2.0 contains a heap out-of-bounds read vulnerability in ParseEXRMultipartHeaderFromMemory() that allows attackers to read beyond buffers due to a stale remaining-size value. Attackers can supply a crafted multi-part EXR file whose later part headers bypass ReadAttribute() bounds checks, crashing applications or leaking adjacent heap memory into attribute values. |
| A Stack-based Buffer Overflow vulnerability [CWE-121] vulnerability in Fortinet FortiOS 7.6.1 through 7.6.6 may allow an unauthenticated attacker who can bypass stack protection and ASLR to execute arbitrary code or commands in the context of the WAD daemon via crafted sockets, only if the explicit proxy is configured with Kerberos authentication and SOCKS enabled. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: validate advertising TLV before type checks
tlv_data_is_valid() reads each advertising data field length from
data[i], then inspects data[i + 1] for managed EIR types before
checking that the current field still fits inside the supplied buffer.
A malformed field whose length byte is the last byte of the buffer can
therefore make the parser read one byte past the advertising data.
KASAN reported the following when a malformed MGMT_OP_ADD_ADVERTISING
request reached that path:
BUG: KASAN: vmalloc-out-of-bounds in tlv_data_is_valid()
Read of size 1
Call trace:
tlv_data_is_valid()
add_advertising()
hci_mgmt_cmd()
hci_sock_sendmsg()
Move the existing element-length check before any type-octet inspection
so each non-empty element is proven to contain its type byte before the
parser looks at data[i + 1]. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: RFCOMM: validate skb length in MCC handlers
The RFCOMM MCC handlers cast skb->data to protocol-specific structs
without validating skb->len first. A malicious remote device can send
truncated MCC frames and trigger out-of-bounds reads in these handlers.
Fix this by using skb_pull_data() to validate and access the required
data before dereferencing it.
rfcomm_recv_rpn() requires special handling since ETSI TS 07.10 allows
1-byte RPN requests. Handle this by validating only the DLCI byte first,
and validating the full struct only when len > 1. |
| In the Linux kernel, the following vulnerability has been resolved:
net/802/mrp: fix vector attribute parsing in mrp_pdu_parse_vecattr
In mrp_pdu_parse_vecattr(), vector attribute events are encoded three
per byte and valen tracks the number of events left to process.
The parser decrements valen after processing the first and second events
from each event byte, but not after processing the third one. When valen
is exactly a multiple of three, the loop continues after the last valid
event and consumes the next byte as a new event byte, applying a
spurious event to the MRP applicant state.
Additionally, when valen is zero the parser unconditionally consumes
attrlen bytes as FirstValue and advances the offset, even though per
IEEE 802.1ak a VectorAttribute with only a LeaveAllEvent has valen of
zero and no FirstValue or Vector fields. This corrupts the offset for
subsequent PDU parsing.
Also, when valen exceeds three the loop crosses byte boundaries but
the attribute value is not incremented between the last event of one
byte and the first event of the next. This causes the first event of
the next byte to use the same attribute value as the third event
rather than the next consecutive value.
Decrement valen after processing the third event, skip FirstValue
consumption when valen is zero, and increment the attribute value at
the end of each loop iteration. |
| In the Linux kernel, the following vulnerability has been resolved:
net: guard timestamp cmsgs to real error queue skbs
skb_is_err_queue() treats PACKET_OUTGOING as the sole marker for an skb
from sk_error_queue. That assumption is not true for AF_PACKET sockets:
outgoing packet taps are also delivered to packet sockets with
skb->pkt_type == PACKET_OUTGOING, but their skb->cb is owned by AF_PACKET
instead of struct sock_exterr_skb.
If such an skb is received with timestamping enabled, the generic
timestamp cmsg path can read AF_PACKET control-buffer state as
sock_exterr_skb::opt_stats. With SO_RXQ_OVFL enabled, the packet drop
counter overlaps opt_stats. An odd drop count makes the path emit
SCM_TIMESTAMPING_OPT_STATS with skb->len and skb->data. For non-linear
skbs this copies past the linear head and can trigger hardened usercopy or
disclose adjacent heap contents.
Keep skb_is_err_queue() local to net/socket.c, but make it verify that
the PACKET_OUTGOING marker is paired with the sock_rmem_free destructor
installed by sock_queue_err_skb(). AF_PACKET receive skbs use normal
receive ownership and no longer pass as error-queue skbs, while legitimate
sk_error_queue entries keep the PACKET_OUTGOING marker and sock_rmem_free
ownership. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: reject BR/EDR signaling packets over MTUsig
net/bluetooth/l2cap_core.c:l2cap_sig_channel() accepts BR/EDR
signaling packets up to the channel MTU and dispatches each command
without enforcing the signaling MTU (MTUsig). A Bluetooth BR/EDR peer
within radio range can send a fixed-channel CID 0x0001 packet that is
larger than MTUsig and contains many L2CAP_ECHO_REQ commands before
pairing. In a real-radio stock-kernel run, one 681-byte signaling
packet containing 168 zero-length ECHO_REQ commands made the target
transmit 168 ECHO_RSP frames over about 220 ms.
Impact: a Bluetooth BR/EDR peer within radio range, before pairing, can
force 168 ECHO_RSP frames from one 681-byte fixed-channel signaling
packet containing packed ECHO_REQ commands.
Define Linux's BR/EDR signaling MTU as the spec minimum of 48 bytes and
reject any larger signaling packet with one L2CAP_COMMAND_REJECT_RSP
carrying L2CAP_REJ_MTU_EXCEEDED before any command is dispatched.
The Bluetooth Core spec wording for MTUExceeded says the reject
identifier shall match the first request command in the packet, and
that packets containing only responses shall be silently discarded.
Linux intentionally deviates from that prescription: silently
discarding desynchronizes the peer because the remote stack never
learns its responses were dropped, and locating the first request
command requires walking command headers past MTUsig, i.e. processing
bytes from a packet we have already decided is too large to process.
We therefore always emit one reject and use the identifier from the
first command header, a single fixed-offset byte read.
The unrestricted BR/EDR signaling parser and ECHO_REQ response path both
trace to the initial git import; no later introducing commit is
available for a Fixes tag. |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Bound root directory content to block size
__tb_property_parse_dir() does not check that content_offset +
content_len fits within block_len for the root directory case.
When rootdir->length equals or exceeds block_len - 2, the entry
loop reads past the allocated property block.
Add a bounds check after computing content_offset and content_len
to reject directories whose content extends past the block. |
| In the Linux kernel, the following vulnerability has been resolved:
af_unix: Reject SIOCATMARK on non-stream sockets
SIOCATMARK reports whether the receive queue is at the urgent mark for
MSG_OOB.
In AF_UNIX, MSG_OOB is supported only for SOCK_STREAM sockets.
SOCK_DGRAM and SOCK_SEQPACKET reject MSG_OOB in sendmsg() and recvmsg(),
so they should not support SIOCATMARK either.
Return -EOPNOTSUPP for non-stream sockets before checking the receive
queue. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath5k: do not access array OOB
Vincent reports:
> The ath5k driver seems to do an array-index-out-of-bounds access as
> shown by the UBSAN kernel message:
> UBSAN: array-index-out-of-bounds in drivers/net/wireless/ath/ath5k/base.c:1741:20
> index 4 is out of range for type 'ieee80211_tx_rate [4]'
> ...
> Call Trace:
> <TASK>
> dump_stack_lvl+0x5d/0x80
> ubsan_epilogue+0x5/0x2b
> __ubsan_handle_out_of_bounds.cold+0x46/0x4b
> ath5k_tasklet_tx+0x4e0/0x560 [ath5k]
> tasklet_action_common+0xb5/0x1c0
It is real. 'ts->ts_final_idx' can be 3 on 5212, so:
info->status.rates[ts->ts_final_idx + 1].idx = -1;
with the array defined as:
struct ieee80211_tx_rate rates[IEEE80211_TX_MAX_RATES];
while the size is:
#define IEEE80211_TX_MAX_RATES 4
is indeed bogus.
Set this 'idx = -1' sentinel only if the array index is less than the
array size. As mac80211 will not look at rates beyond the size
(IEEE80211_TX_MAX_RATES).
Note: The effect of the OOB write is negligible. It just overwrites the
next member of info->status, i.e. ack_signal. |
