| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix null pointer dereference in destroy_previous_session
If client set ->PreviousSessionId on kerberos session setup stage,
NULL pointer dereference error will happen. Since sess->user is not
set yet, It can pass the user argument as NULL to destroy_previous_session.
sess->user will be set in ksmbd_krb5_authenticate(). So this patch move
calling destroy_previous_session() after ksmbd_krb5_authenticate(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/v3d: Avoid NULL pointer dereference in `v3d_job_update_stats()`
The following kernel Oops was recently reported by Mesa CI:
[ 800.139824] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000588
[ 800.148619] Mem abort info:
[ 800.151402] ESR = 0x0000000096000005
[ 800.155141] EC = 0x25: DABT (current EL), IL = 32 bits
[ 800.160444] SET = 0, FnV = 0
[ 800.163488] EA = 0, S1PTW = 0
[ 800.166619] FSC = 0x05: level 1 translation fault
[ 800.171487] Data abort info:
[ 800.174357] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000
[ 800.179832] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 800.184873] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 800.190176] user pgtable: 4k pages, 39-bit VAs, pgdp=00000001014c2000
[ 800.196607] [0000000000000588] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000
[ 800.205305] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP
[ 800.211564] Modules linked in: vc4 snd_soc_hdmi_codec drm_display_helper v3d cec gpu_sched drm_dma_helper drm_shmem_helper drm_kms_helper drm drm_panel_orientation_quirks snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm i2c_brcmstb snd_timer snd backlight
[ 800.234448] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.12.25+rpt-rpi-v8 #1 Debian 1:6.12.25-1+rpt1
[ 800.244182] Hardware name: Raspberry Pi 4 Model B Rev 1.4 (DT)
[ 800.250005] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 800.256959] pc : v3d_job_update_stats+0x60/0x130 [v3d]
[ 800.262112] lr : v3d_job_update_stats+0x48/0x130 [v3d]
[ 800.267251] sp : ffffffc080003e60
[ 800.270555] x29: ffffffc080003e60 x28: ffffffd842784980 x27: 0224012000000000
[ 800.277687] x26: ffffffd84277f630 x25: ffffff81012fd800 x24: 0000000000000020
[ 800.284818] x23: ffffff8040238b08 x22: 0000000000000570 x21: 0000000000000158
[ 800.291948] x20: 0000000000000000 x19: ffffff8040238000 x18: 0000000000000000
[ 800.299078] x17: ffffffa8c1bd2000 x16: ffffffc080000000 x15: 0000000000000000
[ 800.306208] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
[ 800.313338] x11: 0000000000000040 x10: 0000000000001a40 x9 : ffffffd83b39757c
[ 800.320468] x8 : ffffffd842786420 x7 : 7fffffffffffffff x6 : 0000000000ef32b0
[ 800.327598] x5 : 00ffffffffffffff x4 : 0000000000000015 x3 : ffffffd842784980
[ 800.334728] x2 : 0000000000000004 x1 : 0000000000010002 x0 : 000000ba4c0ca382
[ 800.341859] Call trace:
[ 800.344294] v3d_job_update_stats+0x60/0x130 [v3d]
[ 800.349086] v3d_irq+0x124/0x2e0 [v3d]
[ 800.352835] __handle_irq_event_percpu+0x58/0x218
[ 800.357539] handle_irq_event+0x54/0xb8
[ 800.361369] handle_fasteoi_irq+0xac/0x240
[ 800.365458] handle_irq_desc+0x48/0x68
[ 800.369200] generic_handle_domain_irq+0x24/0x38
[ 800.373810] gic_handle_irq+0x48/0xd8
[ 800.377464] call_on_irq_stack+0x24/0x58
[ 800.381379] do_interrupt_handler+0x88/0x98
[ 800.385554] el1_interrupt+0x34/0x68
[ 800.389123] el1h_64_irq_handler+0x18/0x28
[ 800.393211] el1h_64_irq+0x64/0x68
[ 800.396603] default_idle_call+0x3c/0x168
[ 800.400606] do_idle+0x1fc/0x230
[ 800.403827] cpu_startup_entry+0x40/0x50
[ 800.407742] rest_init+0xe4/0xf0
[ 800.410962] start_kernel+0x5e8/0x790
[ 800.414616] __primary_switched+0x80/0x90
[ 800.418622] Code: 8b170277 8b160296 11000421 b9000861 (b9401ac1)
[ 800.424707] ---[ end trace 0000000000000000 ]---
[ 800.457313] ---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]---
This issue happens when the file descriptor is closed before the jobs
submitted by it are completed. When the job completes, we update the
global GPU stats and the per-fd GPU stats, which are exposed through
fdinfo. If the file descriptor was closed, then the struct `v3d_file_priv`
and its stats were already freed and we can't update the per-fd stats.
Therefore, if the file descriptor was already closed, don't u
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
calipso: Fix null-ptr-deref in calipso_req_{set,del}attr().
syzkaller reported a null-ptr-deref in sock_omalloc() while allocating
a CALIPSO option. [0]
The NULL is of struct sock, which was fetched by sk_to_full_sk() in
calipso_req_setattr().
Since commit a1a5344ddbe8 ("tcp: avoid two atomic ops for syncookies"),
reqsk->rsk_listener could be NULL when SYN Cookie is returned to its
client, as hinted by the leading SYN Cookie log.
Here are 3 options to fix the bug:
1) Return 0 in calipso_req_setattr()
2) Return an error in calipso_req_setattr()
3) Alaways set rsk_listener
1) is no go as it bypasses LSM, but 2) effectively disables SYN Cookie
for CALIPSO. 3) is also no go as there have been many efforts to reduce
atomic ops and make TCP robust against DDoS. See also commit 3b24d854cb35
("tcp/dccp: do not touch listener sk_refcnt under synflood").
As of the blamed commit, SYN Cookie already did not need refcounting,
and no one has stumbled on the bug for 9 years, so no CALIPSO user will
care about SYN Cookie.
Let's return an error in calipso_req_setattr() and calipso_req_delattr()
in the SYN Cookie case.
This can be reproduced by [1] on Fedora and now connect() of nc times out.
[0]:
TCP: request_sock_TCPv6: Possible SYN flooding on port [::]:20002. Sending cookies.
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037]
CPU: 3 UID: 0 PID: 12262 Comm: syz.1.2611 Not tainted 6.14.0 #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
RIP: 0010:read_pnet include/net/net_namespace.h:406 [inline]
RIP: 0010:sock_net include/net/sock.h:655 [inline]
RIP: 0010:sock_kmalloc+0x35/0x170 net/core/sock.c:2806
Code: 89 d5 41 54 55 89 f5 53 48 89 fb e8 25 e3 c6 fd e8 f0 91 e3 00 48 8d 7b 30 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 26 01 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b
RSP: 0018:ffff88811af89038 EFLAGS: 00010216
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffff888105266400
RDX: 0000000000000006 RSI: ffff88800c890000 RDI: 0000000000000030
RBP: 0000000000000050 R08: 0000000000000000 R09: ffff88810526640e
R10: ffffed1020a4cc81 R11: ffff88810526640f R12: 0000000000000000
R13: 0000000000000820 R14: ffff888105266400 R15: 0000000000000050
FS: 00007f0653a07640(0000) GS:ffff88811af80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f863ba096f4 CR3: 00000000163c0005 CR4: 0000000000770ef0
PKRU: 80000000
Call Trace:
<IRQ>
ipv6_renew_options+0x279/0x950 net/ipv6/exthdrs.c:1288
calipso_req_setattr+0x181/0x340 net/ipv6/calipso.c:1204
calipso_req_setattr+0x56/0x80 net/netlabel/netlabel_calipso.c:597
netlbl_req_setattr+0x18a/0x440 net/netlabel/netlabel_kapi.c:1249
selinux_netlbl_inet_conn_request+0x1fb/0x320 security/selinux/netlabel.c:342
selinux_inet_conn_request+0x1eb/0x2c0 security/selinux/hooks.c:5551
security_inet_conn_request+0x50/0xa0 security/security.c:4945
tcp_v6_route_req+0x22c/0x550 net/ipv6/tcp_ipv6.c:825
tcp_conn_request+0xec8/0x2b70 net/ipv4/tcp_input.c:7275
tcp_v6_conn_request+0x1e3/0x440 net/ipv6/tcp_ipv6.c:1328
tcp_rcv_state_process+0xafa/0x52b0 net/ipv4/tcp_input.c:6781
tcp_v6_do_rcv+0x8a6/0x1a40 net/ipv6/tcp_ipv6.c:1667
tcp_v6_rcv+0x505e/0x5b50 net/ipv6/tcp_ipv6.c:1904
ip6_protocol_deliver_rcu+0x17c/0x1da0 net/ipv6/ip6_input.c:436
ip6_input_finish+0x103/0x180 net/ipv6/ip6_input.c:480
NF_HOOK include/linux/netfilter.h:314 [inline]
NF_HOOK include/linux/netfilter.h:308 [inline]
ip6_input+0x13c/0x6b0 net/ipv6/ip6_input.c:491
dst_input include/net/dst.h:469 [inline]
ip6_rcv_finish net/ipv6/ip6_input.c:79 [inline]
ip6_rcv_finish+0xb6/0x490 net/ipv6/ip6_input.c:69
NF_HOOK include/linux/netfilter.h:314 [inline]
NF_HOOK include/linux/netf
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net: wwan: t7xx: Fix napi rx poll issue
When driver handles the napi rx polling requests, the netdev might
have been released by the dellink logic triggered by the disconnect
operation on user plane. However, in the logic of processing skb in
polling, an invalid netdev is still being used, which causes a panic.
BUG: kernel NULL pointer dereference, address: 00000000000000f1
Oops: 0000 [#1] PREEMPT SMP NOPTI
RIP: 0010:dev_gro_receive+0x3a/0x620
[...]
Call Trace:
<IRQ>
? __die_body+0x68/0xb0
? page_fault_oops+0x379/0x3e0
? exc_page_fault+0x4f/0xa0
? asm_exc_page_fault+0x22/0x30
? __pfx_t7xx_ccmni_recv_skb+0x10/0x10 [mtk_t7xx (HASH:1400 7)]
? dev_gro_receive+0x3a/0x620
napi_gro_receive+0xad/0x170
t7xx_ccmni_recv_skb+0x48/0x70 [mtk_t7xx (HASH:1400 7)]
t7xx_dpmaif_napi_rx_poll+0x590/0x800 [mtk_t7xx (HASH:1400 7)]
net_rx_action+0x103/0x470
irq_exit_rcu+0x13a/0x310
sysvec_apic_timer_interrupt+0x56/0x90
</IRQ> |
| In the Linux kernel, the following vulnerability has been resolved:
dma-buf: insert memory barrier before updating num_fences
smp_store_mb() inserts memory barrier after storing operation.
It is different with what the comment is originally aiming so Null
pointer dereference can be happened if memory update is reordered. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: use list_first_entry_or_null for opinfo_get_list()
The list_first_entry() macro never returns NULL. If the list is
empty then it returns an invalid pointer. Use list_first_entry_or_null()
to check if the list is empty. |
| In the Linux kernel, the following vulnerability has been resolved:
net/tls: fix kernel panic when alloc_page failed
We cannot set frag_list to NULL pointer when alloc_page failed.
It will be used in tls_strp_check_queue_ok when the next time
tls_strp_read_sock is called.
This is because we don't reset full_len in tls_strp_flush_anchor_copy()
so the recv path will try to continue handling the partial record
on the next call but we dettached the rcvq from the frag list.
Alternative fix would be to reset full_len.
Unable to handle kernel NULL pointer dereference
at virtual address 0000000000000028
Call trace:
tls_strp_check_rcv+0x128/0x27c
tls_strp_data_ready+0x34/0x44
tls_data_ready+0x3c/0x1f0
tcp_data_ready+0x9c/0xe4
tcp_data_queue+0xf6c/0x12d0
tcp_rcv_established+0x52c/0x798 |
| In the Linux kernel, the following vulnerability has been resolved:
xenbus: Use kref to track req lifetime
Marek reported seeing a NULL pointer fault in the xenbus_thread
callstack:
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: e030:__wake_up_common+0x4c/0x180
Call Trace:
<TASK>
__wake_up_common_lock+0x82/0xd0
process_msg+0x18e/0x2f0
xenbus_thread+0x165/0x1c0
process_msg+0x18e is req->cb(req). req->cb is set to xs_wake_up(), a
thin wrapper around wake_up(), or xenbus_dev_queue_reply(). It seems
like it was xs_wake_up() in this case.
It seems like req may have woken up the xs_wait_for_reply(), which
kfree()ed the req. When xenbus_thread resumes, it faults on the zero-ed
data.
Linux Device Drivers 2nd edition states:
"Normally, a wake_up call can cause an immediate reschedule to happen,
meaning that other processes might run before wake_up returns."
... which would match the behaviour observed.
Change to keeping two krefs on each request. One for the caller, and
one for xenbus_thread. Each will kref_put() when finished, and the last
will free it.
This use of kref matches the description in
Documentation/core-api/kref.rst |
| In the Linux kernel, the following vulnerability has been resolved:
net: use sock_gen_put() when sk_state is TCP_TIME_WAIT
It is possible for a pointer of type struct inet_timewait_sock to be
returned from the functions __inet_lookup_established() and
__inet6_lookup_established(). This can cause a crash when the
returned pointer is of type struct inet_timewait_sock and
sock_put() is called on it. The following is a crash call stack that
shows sk->sk_wmem_alloc being accessed in sk_free() during the call to
sock_put() on a struct inet_timewait_sock pointer. To avoid this issue,
use sock_gen_put() instead of sock_put() when sk->sk_state
is TCP_TIME_WAIT.
mrdump.ko ipanic() + 120
vmlinux notifier_call_chain(nr_to_call=-1, nr_calls=0) + 132
vmlinux atomic_notifier_call_chain(val=0) + 56
vmlinux panic() + 344
vmlinux add_taint() + 164
vmlinux end_report() + 136
vmlinux kasan_report(size=0) + 236
vmlinux report_tag_fault() + 16
vmlinux do_tag_recovery() + 16
vmlinux __do_kernel_fault() + 88
vmlinux do_bad_area() + 28
vmlinux do_tag_check_fault() + 60
vmlinux do_mem_abort() + 80
vmlinux el1_abort() + 56
vmlinux el1h_64_sync_handler() + 124
vmlinux > 0xFFFFFFC080011294()
vmlinux __lse_atomic_fetch_add_release(v=0xF2FFFF82A896087C)
vmlinux __lse_atomic_fetch_sub_release(v=0xF2FFFF82A896087C)
vmlinux arch_atomic_fetch_sub_release(i=1, v=0xF2FFFF82A896087C)
+ 8
vmlinux raw_atomic_fetch_sub_release(i=1, v=0xF2FFFF82A896087C)
+ 8
vmlinux atomic_fetch_sub_release(i=1, v=0xF2FFFF82A896087C) + 8
vmlinux __refcount_sub_and_test(i=1, r=0xF2FFFF82A896087C,
oldp=0) + 8
vmlinux __refcount_dec_and_test(r=0xF2FFFF82A896087C, oldp=0) + 8
vmlinux refcount_dec_and_test(r=0xF2FFFF82A896087C) + 8
vmlinux sk_free(sk=0xF2FFFF82A8960700) + 28
vmlinux sock_put() + 48
vmlinux tcp6_check_fraglist_gro() + 236
vmlinux tcp6_gro_receive() + 624
vmlinux ipv6_gro_receive() + 912
vmlinux dev_gro_receive() + 1116
vmlinux napi_gro_receive() + 196
ccmni.ko ccmni_rx_callback() + 208
ccmni.ko ccmni_queue_recv_skb() + 388
ccci_dpmaif.ko dpmaif_rxq_push_thread() + 1088
vmlinux kthread() + 268
vmlinux 0xFFFFFFC08001F30C() |
| In the Linux kernel, the following vulnerability has been resolved:
pds_core: make wait_context part of q_info
Make the wait_context a full part of the q_info struct rather
than a stack variable that goes away after pdsc_adminq_post()
is done so that the context is still available after the wait
loop has given up.
There was a case where a slow development firmware caused
the adminq request to time out, but then later the FW finally
finished the request and sent the interrupt. The handler tried
to complete_all() the completion context that had been created
on the stack in pdsc_adminq_post() but no longer existed.
This caused bad pointer usage, kernel crashes, and much wailing
and gnashing of teeth. |
| In the Linux kernel, the following vulnerability has been resolved:
xen-netfront: handle NULL returned by xdp_convert_buff_to_frame()
The function xdp_convert_buff_to_frame() may return NULL if it fails
to correctly convert the XDP buffer into an XDP frame due to memory
constraints, internal errors, or invalid data. Failing to check for NULL
may lead to a NULL pointer dereference if the result is used later in
processing, potentially causing crashes, data corruption, or undefined
behavior.
On XDP redirect failure, the associated page must be released explicitly
if it was previously retained via get_page(). Failing to do so may result
in a memory leak, as the pages reference count is not decremented. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: fix NULL pointer in can_accept_new_subflow
When testing valkey benchmark tool with MPTCP, the kernel panics in
'mptcp_can_accept_new_subflow' because subflow_req->msk is NULL.
Call trace:
mptcp_can_accept_new_subflow (./net/mptcp/subflow.c:63 (discriminator 4)) (P)
subflow_syn_recv_sock (./net/mptcp/subflow.c:854)
tcp_check_req (./net/ipv4/tcp_minisocks.c:863)
tcp_v4_rcv (./net/ipv4/tcp_ipv4.c:2268)
ip_protocol_deliver_rcu (./net/ipv4/ip_input.c:207)
ip_local_deliver_finish (./net/ipv4/ip_input.c:234)
ip_local_deliver (./net/ipv4/ip_input.c:254)
ip_rcv_finish (./net/ipv4/ip_input.c:449)
...
According to the debug log, the same req received two SYN-ACK in a very
short time, very likely because the client retransmits the syn ack due
to multiple reasons.
Even if the packets are transmitted with a relevant time interval, they
can be processed by the server on different CPUs concurrently). The
'subflow_req->msk' ownership is transferred to the subflow the first,
and there will be a risk of a null pointer dereference here.
This patch fixes this issue by moving the 'subflow_req->msk' under the
`own_req == true` conditional.
Note that the !msk check in subflow_hmac_valid() can be dropped, because
the same check already exists under the own_req mpj branch where the
code has been moved to. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/perf: Fix ref-counting on the PMU 'vpa_pmu'
Commit 176cda0619b6 ("powerpc/perf: Add perf interface to expose vpa
counters") introduced 'vpa_pmu' to expose Book3s-HV nested APIv2 provided
L1<->L2 context switch latency counters to L1 user-space via
perf-events. However the newly introduced PMU named 'vpa_pmu' doesn't
assign ownership of the PMU to the module 'vpa_pmu'. Consequently the
module 'vpa_pmu' can be unloaded while one of the perf-events are still
active, which can lead to kernel oops and panic of the form below on a
Pseries-LPAR:
BUG: Kernel NULL pointer dereference on read at 0x00000058
<snip>
NIP [c000000000506cb8] event_sched_out+0x40/0x258
LR [c00000000050e8a4] __perf_remove_from_context+0x7c/0x2b0
Call Trace:
[c00000025fc3fc30] [c00000025f8457a8] 0xc00000025f8457a8 (unreliable)
[c00000025fc3fc80] [fffffffffffffee0] 0xfffffffffffffee0
[c00000025fc3fcd0] [c000000000501e70] event_function+0xa8/0x120
<snip>
Kernel panic - not syncing: Aiee, killing interrupt handler!
Fix this by adding the module ownership to 'vpa_pmu' so that the module
'vpa_pmu' is ref-counted and prevented from being unloaded when perf-events
are initialized. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/core: Don't expose hw_counters outside of init net namespace
Commit 467f432a521a ("RDMA/core: Split port and device counter sysfs
attributes") accidentally almost exposed hw counters to non-init net
namespaces. It didn't expose them fully, as an attempt to read any of
those counters leads to a crash like this one:
[42021.807566] BUG: kernel NULL pointer dereference, address: 0000000000000028
[42021.814463] #PF: supervisor read access in kernel mode
[42021.819549] #PF: error_code(0x0000) - not-present page
[42021.824636] PGD 0 P4D 0
[42021.827145] Oops: 0000 [#1] SMP PTI
[42021.830598] CPU: 82 PID: 2843922 Comm: switchto-defaul Kdump: loaded Tainted: G S W I XXX
[42021.841697] Hardware name: XXX
[42021.849619] RIP: 0010:hw_stat_device_show+0x1e/0x40 [ib_core]
[42021.855362] Code: 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 49 89 d0 4c 8b 5e 20 48 8b 8f b8 04 00 00 48 81 c7 f0 fa ff ff <48> 8b 41 28 48 29 ce 48 83 c6 d0 48 c1 ee 04 69 d6 ab aa aa aa 48
[42021.873931] RSP: 0018:ffff97fe90f03da0 EFLAGS: 00010287
[42021.879108] RAX: ffff9406988a8c60 RBX: ffff940e1072d438 RCX: 0000000000000000
[42021.886169] RDX: ffff94085f1aa000 RSI: ffff93c6cbbdbcb0 RDI: ffff940c7517aef0
[42021.893230] RBP: ffff97fe90f03e70 R08: ffff94085f1aa000 R09: 0000000000000000
[42021.900294] R10: ffff94085f1aa000 R11: ffffffffc0775680 R12: ffffffff87ca2530
[42021.907355] R13: ffff940651602840 R14: ffff93c6cbbdbcb0 R15: ffff94085f1aa000
[42021.914418] FS: 00007fda1a3b9700(0000) GS:ffff94453fb80000(0000) knlGS:0000000000000000
[42021.922423] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[42021.928130] CR2: 0000000000000028 CR3: 00000042dcfb8003 CR4: 00000000003726f0
[42021.935194] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[42021.942257] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[42021.949324] Call Trace:
[42021.951756] <TASK>
[42021.953842] [<ffffffff86c58674>] ? show_regs+0x64/0x70
[42021.959030] [<ffffffff86c58468>] ? __die+0x78/0xc0
[42021.963874] [<ffffffff86c9ef75>] ? page_fault_oops+0x2b5/0x3b0
[42021.969749] [<ffffffff87674b92>] ? exc_page_fault+0x1a2/0x3c0
[42021.975549] [<ffffffff87801326>] ? asm_exc_page_fault+0x26/0x30
[42021.981517] [<ffffffffc0775680>] ? __pfx_show_hw_stats+0x10/0x10 [ib_core]
[42021.988482] [<ffffffffc077564e>] ? hw_stat_device_show+0x1e/0x40 [ib_core]
[42021.995438] [<ffffffff86ac7f8e>] dev_attr_show+0x1e/0x50
[42022.000803] [<ffffffff86a3eeb1>] sysfs_kf_seq_show+0x81/0xe0
[42022.006508] [<ffffffff86a11134>] seq_read_iter+0xf4/0x410
[42022.011954] [<ffffffff869f4b2e>] vfs_read+0x16e/0x2f0
[42022.017058] [<ffffffff869f50ee>] ksys_read+0x6e/0xe0
[42022.022073] [<ffffffff8766f1ca>] do_syscall_64+0x6a/0xa0
[42022.027441] [<ffffffff8780013b>] entry_SYSCALL_64_after_hwframe+0x78/0xe2
The problem can be reproduced using the following steps:
ip netns add foo
ip netns exec foo bash
cat /sys/class/infiniband/mlx4_0/hw_counters/*
The panic occurs because of casting the device pointer into an
ib_device pointer using container_of() in hw_stat_device_show() is
wrong and leads to a memory corruption.
However the real problem is that hw counters should never been exposed
outside of the non-init net namespace.
Fix this by saving the index of the corresponding attribute group
(it might be 1 or 2 depending on the presence of driver-specific
attributes) and zeroing the pointer to hw_counters group for compat
devices during the initialization.
With this fix applied hw_counters are not available in a non-init
net namespace:
find /sys/class/infiniband/mlx4_0/ -name hw_counters
/sys/class/infiniband/mlx4_0/ports/1/hw_counters
/sys/class/infiniband/mlx4_0/ports/2/hw_counters
/sys/class/infiniband/mlx4_0/hw_counters
ip netns add foo
ip netns exec foo bash
find /sys/class/infiniband/mlx4_0/ -name hw_counters |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Fix mlx5_poll_one() cur_qp update flow
When cur_qp isn't NULL, in order to avoid fetching the QP from
the radix tree again we check if the next cqe QP is identical to
the one we already have.
The bug however is that we are checking if the QP is identical by
checking the QP number inside the CQE against the QP number inside the
mlx5_ib_qp, but that's wrong since the QP number from the CQE is from
FW so it should be matched against mlx5_core_qp which is our FW QP
number.
Otherwise we could use the wrong QP when handling a CQE which could
cause the kernel trace below.
This issue is mainly noticeable over QPs 0 & 1, since for now they are
the only QPs in our driver whereas the QP number inside mlx5_ib_qp
doesn't match the QP number inside mlx5_core_qp.
BUG: kernel NULL pointer dereference, address: 0000000000000012
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP
CPU: 0 UID: 0 PID: 7927 Comm: kworker/u62:1 Not tainted 6.14.0-rc3+ #189
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
Workqueue: ib-comp-unb-wq ib_cq_poll_work [ib_core]
RIP: 0010:mlx5_ib_poll_cq+0x4c7/0xd90 [mlx5_ib]
Code: 03 00 00 8d 58 ff 21 cb 66 39 d3 74 39 48 c7 c7 3c 89 6e a0 0f b7 db e8 b7 d2 b3 e0 49 8b 86 60 03 00 00 48 c7 c7 4a 89 6e a0 <0f> b7 5c 98 02 e8 9f d2 b3 e0 41 0f b7 86 78 03 00 00 83 e8 01 21
RSP: 0018:ffff88810511bd60 EFLAGS: 00010046
RAX: 0000000000000010 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff88885fa1b3c0 RDI: ffffffffa06e894a
RBP: 00000000000000b0 R08: 0000000000000000 R09: ffff88810511bc10
R10: 0000000000000001 R11: 0000000000000001 R12: ffff88810d593000
R13: ffff88810e579108 R14: ffff888105146000 R15: 00000000000000b0
FS: 0000000000000000(0000) GS:ffff88885fa00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000012 CR3: 00000001077e6001 CR4: 0000000000370eb0
Call Trace:
<TASK>
? __die+0x20/0x60
? page_fault_oops+0x150/0x3e0
? exc_page_fault+0x74/0x130
? asm_exc_page_fault+0x22/0x30
? mlx5_ib_poll_cq+0x4c7/0xd90 [mlx5_ib]
__ib_process_cq+0x5a/0x150 [ib_core]
ib_cq_poll_work+0x31/0x90 [ib_core]
process_one_work+0x169/0x320
worker_thread+0x288/0x3a0
? work_busy+0xb0/0xb0
kthread+0xd7/0x1f0
? kthreads_online_cpu+0x130/0x130
? kthreads_online_cpu+0x130/0x130
ret_from_fork+0x2d/0x50
? kthreads_online_cpu+0x130/0x130
ret_from_fork_asm+0x11/0x20
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix null pointer dereference in alloc_preauth_hash()
The Client send malformed smb2 negotiate request. ksmbd return error
response. Subsequently, the client can send smb2 session setup even
thought conn->preauth_info is not allocated.
This patch add KSMBD_SESS_NEED_SETUP status of connection to ignore
session setup request if smb2 negotiate phase is not complete. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Bridge, fix the crash caused by LAG state check
When removing LAG device from bridge, NETDEV_CHANGEUPPER event is
triggered. Driver finds the lower devices (PFs) to flush all the
offloaded entries. And mlx5_lag_is_shared_fdb is checked, it returns
false if one of PF is unloaded. In such case,
mlx5_esw_bridge_lag_rep_get() and its caller return NULL, instead of
the alive PF, and the flush is skipped.
Besides, the bridge fdb entry's lastuse is updated in mlx5 bridge
event handler. But this SWITCHDEV_FDB_ADD_TO_BRIDGE event can be
ignored in this case because the upper interface for bond is deleted,
and the entry will never be aged because lastuse is never updated.
To make things worse, as the entry is alive, mlx5 bridge workqueue
keeps sending that event, which is then handled by kernel bridge
notifier. It causes the following crash when accessing the passed bond
netdev which is already destroyed.
To fix this issue, remove such checks. LAG state is already checked in
commit 15f8f168952f ("net/mlx5: Bridge, verify LAG state when adding
bond to bridge"), driver still need to skip offload if LAG becomes
invalid state after initialization.
Oops: stack segment: 0000 [#1] SMP
CPU: 3 UID: 0 PID: 23695 Comm: kworker/u40:3 Tainted: G OE 6.11.0_mlnx #1
Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Workqueue: mlx5_bridge_wq mlx5_esw_bridge_update_work [mlx5_core]
RIP: 0010:br_switchdev_event+0x2c/0x110 [bridge]
Code: 44 00 00 48 8b 02 48 f7 00 00 02 00 00 74 69 41 54 55 53 48 83 ec 08 48 8b a8 08 01 00 00 48 85 ed 74 4a 48 83 fe 02 48 89 d3 <4c> 8b 65 00 74 23 76 49 48 83 fe 05 74 7e 48 83 fe 06 75 2f 0f b7
RSP: 0018:ffffc900092cfda0 EFLAGS: 00010297
RAX: ffff888123bfe000 RBX: ffffc900092cfe08 RCX: 00000000ffffffff
RDX: ffffc900092cfe08 RSI: 0000000000000001 RDI: ffffffffa0c585f0
RBP: 6669746f6e690a30 R08: 0000000000000000 R09: ffff888123ae92c8
R10: 0000000000000000 R11: fefefefefefefeff R12: ffff888123ae9c60
R13: 0000000000000001 R14: ffffc900092cfe08 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff88852c980000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f15914c8734 CR3: 0000000002830005 CR4: 0000000000770ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
? __die_body+0x1a/0x60
? die+0x38/0x60
? do_trap+0x10b/0x120
? do_error_trap+0x64/0xa0
? exc_stack_segment+0x33/0x50
? asm_exc_stack_segment+0x22/0x30
? br_switchdev_event+0x2c/0x110 [bridge]
? sched_balance_newidle.isra.149+0x248/0x390
notifier_call_chain+0x4b/0xa0
atomic_notifier_call_chain+0x16/0x20
mlx5_esw_bridge_update+0xec/0x170 [mlx5_core]
mlx5_esw_bridge_update_work+0x19/0x40 [mlx5_core]
process_scheduled_works+0x81/0x390
worker_thread+0x106/0x250
? bh_worker+0x110/0x110
kthread+0xb7/0xe0
? kthread_park+0x80/0x80
ret_from_fork+0x2d/0x50
? kthread_park+0x80/0x80
ret_from_fork_asm+0x11/0x20
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Validate prev_cpu in scx_bpf_select_cpu_dfl()
If a BPF scheduler provides an invalid CPU (outside the nr_cpu_ids
range) as prev_cpu to scx_bpf_select_cpu_dfl() it can cause a kernel
crash.
To prevent this, validate prev_cpu in scx_bpf_select_cpu_dfl() and
trigger an scx error if an invalid CPU is specified. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/hmm: Don't dereference struct page pointers without notifier lock
The pnfs that we obtain from hmm_range_fault() point to pages that
we don't have a reference on, and the guarantee that they are still
in the cpu page-tables is that the notifier lock must be held and the
notifier seqno is still valid.
So while building the sg table and marking the pages accesses / dirty
we need to hold this lock with a validated seqno.
However, the lock is reclaim tainted which makes
sg_alloc_table_from_pages_segment() unusable, since it internally
allocates memory.
Instead build the sg-table manually. For the non-iommu case
this might lead to fewer coalesces, but if that's a problem it can
be fixed up later in the resource cursor code. For the iommu case,
the whole sg-table may still be coalesced to a single contigous
device va region.
This avoids marking pages that we don't own dirty and accessed, and
it also avoid dereferencing struct pages that we don't own.
v2:
- Use assert to check whether hmm pfns are valid (Matthew Auld)
- Take into account that large pages may cross range boundaries
(Matthew Auld)
v3:
- Don't unnecessarily check for a non-freed sg-table. (Matthew Auld)
- Add a missing up_read() in an error path. (Matthew Auld)
(cherry picked from commit ea3e66d280ce2576664a862693d1da8fd324c317) |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/bnxt_re: Add sanity checks on rdev validity
There is a possibility that ulp_irq_stop and ulp_irq_start
callbacks will be called when the device is in detached state.
This can cause a crash due to NULL pointer dereference as
the rdev is already freed. |
