Export limit exceeded: 413877 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (106748 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72499 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Free CQ toggle page after firmware teardown Free the toggle page only after firmware teardown completes so that an NQ interrupt arriving during bnxt_qplib_destroy_cq() won't write the toggle value to an already-freed page. Move free_page() after bnxt_qplib_destroy_cq. | ||||
| CVE-2026-72497 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Add a max slot check for SQ The variable WQE mode must be validated against the maximum slots supported by HW. The max supported value is 64K. Adding a max and min check and fail if user supplied value is more than the max supported and zero. | ||||
| CVE-2026-72488 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: soundwire: fix bug in sdw_add_element_group_count found by syzkaller The original implementation caused an out-of-bounds memory access in the sdw_add_element_group_count for-loop when i == num. for (i = 0; i <= num; i++) { if (rate == group->rates[i] && lane == group->lanes[i]) ... To fix this error, the function now checks for existing rate/lane entries in the group(a function parameter) using a for-loop before adding them. No functional changes apart from this fix. | ||||
| CVE-2026-72440 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: md/raid1: fix writes_pending and barrier reference leaks on write failures raid1_make_request() acquires a writes_pending reference with md_write_start() before calling raid1_write_request(). Several failure paths in raid1_write_request() complete the bio and return without reaching the normal write completion path, causing the corresponding md_write_end() to be skipped. Make raid1_write_request() return a status indicating whether the write request was successfully queued. This allows raid1_make_request() to call md_write_end() when raid1_write_request() fails. Additionally, if wait_blocked_rdev() fails after wait_barrier() succeeds, the associated barrier reference is not released. Call allow_barrier() before returning from that path to keep the barrier accounting balanced. | ||||
| CVE-2026-72405 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: udp_tunnel: prevent double queueing in udp_tunnel_nic_device_sync Yue Sun reported a use-after-free and debugobjects warning in udp_tunnel_nic_device_sync_work() during concurrent device operations. The workqueue core clears the internal pending bit before invoking the worker. At that point, a concurrent thread can queue the work again. When the already running worker eventually clears the work_pending flag to 0, it mistakenly clears the flag for the newly queued instance. udp_tunnel_nic_unregister() then observes work_pending as 0 and frees the structure while the second work item is still active in the queue, leading to UAF. Fix this by returning early in udp_tunnel_nic_device_sync() if work_pending is already set, preventing redundant work queueing. | ||||
| CVE-2026-72380 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xen/pvcalls: bound backend response req_id before indexing rsp[] pvcalls_front_event_handler() takes req_id directly from the backend-supplied ring response and uses it to index the fixed-size bedata->rsp[] array for a memcpy() and a store, with no range check. A malicious or buggy backend can set req_id past PVCALLS_NR_RSP_PER_RING and drive an out-of-bounds write past the bedata allocation. req_id was also declared int while the wire field rsp->req_id is u32, so a range check on the signed value alone is insufficient: a backend req_id of 0xffffffff becomes -1, passes a >= PVCALLS_NR_RSP_PER_RING test and indexes bedata->rsp[-1]. Declare req_id as u32 so a single bound covers both ends. A backend that sends an out-of-range req_id has violated the wire protocol, so rather than silently dropping the response, log once and stop trusting the backend: set bedata->disabled. The event handler then ignores further responses, and the request paths that wait for a response return -EIO instead of blocking forever. This mirrors the fatal-error handling xen-netback uses (xenvif_fatal_tx_err()). The pvcalls frontend currently trusts its backend, so this is not a classic-Xen security issue, but it matters for hardening PV frontends against malicious backends (confidential and disaggregated deployments). | ||||
| CVE-2026-72367 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iomap: guard io_size EOF trim against concurrent truncate underflow iomap: fix zero padding data issue in concurrent append writes changed ioend accounting so that io_size tracks only valid data within EOF. This trims io_size when a writeback range extends past end_pos: ioend->io_size += map_len; if (ioend->io_offset + ioend->io_size > end_pos) ioend->io_size = end_pos - ioend->io_offset; However, if end_pos ends up below ioend->io_offset, the subtraction becomes negative and is stored in size_t io_size, causing an unsigned wrap to a huge value. This can happen when writeback continues past byte-level EOF up to a block-aligned range, or when a concurrent truncate shrinks the file after end_pos was sampled in iomap_writeback_handle_eof(). A wrapped io_size can mislead append detection and corrupt completion-time size handling, since filesystem end_io paths consume io_size for decisions such as on-disk EOF updates and unwritten/COW completion ranges. Fix this by clamping io_size to zero when EOF has moved to or before the ioend start offset. This preserves the original intent of trimming io_size to valid in-EOF data while avoiding the underflow. | ||||
| CVE-2026-72352 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: bpf: Fix hid_bpf_get_data() range check hid_bpf_get_data() returns a pointer into the HID-BPF context data when the caller-provided offset and size fit inside ctx->allocated_size. The current check adds rdwr_buf_size and offset before comparing the result against ctx->allocated_size. Since both values are unsigned, a very large size can wrap the sum below ctx->allocated_size and make the helper return a pointer even though the requested range is not contained in the backing buffer. Use check_add_overflow() to reject wrapped range ends before comparing the requested range end against ctx->allocated_size. | ||||
| CVE-2026-72213 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: fix hugetlb cgroup rsvd charge/uncharge mismatch In alloc_hugetlb_folio(), a single h_cg pointer is used for both the rsvd and non-rsvd hugetlb cgroup charges. When map_chg is set, hugetlb_cgroup_charge_cgroup_rsvd() stores the charged cgroup in h_cg, but the immediately following hugetlb_cgroup_charge_cgroup() overwrites h_cg with the non-rsvd cgroup pointer. As a result, hugetlb_cgroup_commit_charge_rsvd() stores the wrong (non-rsvd) cgroup pointer into the folio's rsvd slot. When the folio is later freed, free_huge_folio() unconditionally calls both hugetlb_cgroup_uncharge_folio() and hugetlb_cgroup_uncharge_folio_rsvd(). The rsvd uncharge reads back the wrong cgroup from the folio and decrements a counter that was never charged for that cgroup, causing a page_counter underflow: page_counter underflow: -512 nr_pages=512 WARNING: mm/page_counter.c:61 at page_counter_cancel Fix this by introducing a separate h_cg_rsvd pointer exclusively for the rsvd charge path, keeping the rsvd and non-rsvd charges fully independent through their charge, commit, and error uncharge paths. | ||||
| CVE-2026-72203 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: skip extent mft records in writeback to prevent deadlock This patch fixes the ABBA deadlock between extent_lock and extent mrec_lock triggered by xfstests generic/113, that occurs since the commit 6994acf33bae ("ntfs: use base mft_no when looking up base inode for extent record"). Path A (inode writeback): VFS writeback -> ntfs_write_inode() -> __ntfs_write_inode() -> mutex_lock(&ni->extent_lock) -> mutex_lock(&tni->mrec_lock) Path B (MFT folio writeback): VFS writeback of $MFT dirty folios -> ntfs_mft_writepages() -> ntfs_write_mft_block() -> ntfs_may_write_mft_record() -> holds one extent mrec_lock from a previous iteration -> tries to acquire another base inode extent_lock By removing all extent_lock and extent mrec_lock acquisition from the MFT folio writeback path, the ABBA lock ordering is eliminated: Path A: __ntfs_write_inode(): extent_lock -> mrec_lock Path B (removed): ntfs_write_mft_block(): mrec_lock -> extent_lock Path B is always redundant for extent records because: 1. mark_mft_record_dirty(ext_ni) does NOT dirty the MFT folio. It only sets NInoDirty(ext_ni) and marks the base VFS inode dirty via __mark_inode_dirty(I_DIRTY_DATASYNC), which triggers Path A. Therefore, normal extent modifications never create a situation where the MFT folio is dirty and Path B is not scheduled. 2. The MFT folio only gets dirtied via ntfs_mft_mark_dirty() inside ntfs_mft_record_alloc(). But all identified callers in attrib.c (ntfs_attr_add, ntfs_attr_record_move_away, ntfs_attr_make_non_resident, ntfs_attr_record_resize) follow through with mark_mft_record_dirty(), which triggers Path A to write the complete record. 3. ntfs_evict_big_inode() calls ntfs_commit_inode() before freeing extent inodes, ensuring all dirty extents are flushed via Path A before the base inode leaves the icache. | ||||
| CVE-2026-72198 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: reject non-resident records for resident-only attributes The shared lookup-time attribute validator rejects non-resident $FILE_NAME and $VOLUME_NAME records because their formats require resident values and callers handle returned records as resident attributes. Other resident-only attribute types still pass through the generic non-resident mapping-pairs checks. That leaves real resident/non-resident union confusion paths. Inode load looks up $STANDARD_INFORMATION and then reads data.resident.value_offset without checking a->non_resident. ntfs_inode_sync_standard_information() does the same when updating the standard information value. ntfs_write_volume_flags() also looks up $VOLUME_INFORMATION and reads data.resident.value_offset directly. $INDEX_ROOT callers in dir.c and index.c depend on the same lookup contract before consuming the resident index root value. Reject non-resident records for all resident-only attribute types in the shared validator. Keep the existing $FILE_NAME and $VOLUME_NAME behavior, but factor it through a helper and extend it to $STANDARD_INFORMATION, $OBJECT_ID, $VOLUME_INFORMATION, $INDEX_ROOT, and $EA_INFORMATION. For $OBJECT_ID and $EA_INFORMATION this is contract hardening for resident-only formats; this patch only rejects the non-resident form and does not add new resident value validation for those types. | ||||
| CVE-2026-72162 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix UBSAN array-index-out-of-bounds in ocfs2_sum_rightmost_rec [BUG] On-disk corruption setting l_next_free_rec to 0 in an inode's embedded extent list triggers a UBSAN panic on the next write to that file. [CAUSE] ocfs2_sum_rightmost_rec() computes i = le16_to_cpu(el->l_next_free_rec) - 1 and accesses el->l_recs[i] without validating i. When l_next_free_rec is 0, i becomes -1; when l_next_free_rec exceeds l_count, i falls past the end of the array. Either case violates the __counted_by_le(l_count) annotation on l_recs[] and triggers UBSAN. [FIX] Validate the inode's embedded extent list when the inode is read, in ocfs2_validate_inode_block(): l_count must be non-zero and no larger than the inode block can hold, and l_next_free_rec must not exceed l_count. A corrupt list is rejected at read time, before the b-tree code can index l_recs[] out of bounds. | ||||
| CVE-2026-72009 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: pmdomain: imx93-blk-ctrl: Extract PHY as shared domain for DSI/CSI The MIPI DSI and CSI domains share control bits for clock and reset, which can lead to incorrect behavior if one domain disables the shared resource while the other is still active. To fix the issue, introduce a shared MIPI PHY power domain to own the common resources and make DSI and CSI its subdomains. This ensures the shared bits are properly managed and not disabled while still in use. | ||||
| CVE-2026-68471 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ieee80211: validate MLE common info length ieee80211_mle_common_size() uses the first common-info octet as the common information length for all known MLE types. However, ieee80211_mle_size_ok() only validates that octet for Basic, Probe Request, and TDLS MLEs. Reconfiguration MLEs also skipped the length octet when calculating the minimum common size, and Priority Access MLEs skipped validation of the advertised common information length. Account for the Reconfiguration common-info length octet and validate the advertised common information length for all known MLE types. Keep unknown-type handling unchanged. [remove now misleading comment] | ||||
| CVE-2026-68470 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: validate extension-frame layout before RX Extension frames only have the extension header at the regular 802.11 header offset. The generic RX path can still reach helpers and interface dispatch code that read regular header address fields before unsupported extension subtypes are dropped. mac80211 currently only handles S1G beacon extension frames. Drop other extension subtypes before they can reach regular-header RX processing. For S1G beacons, linearize the SKB with the management-frame path and require the fixed S1G beacon header, including optional fixed fields indicated by frame control, before generic RX dispatch. Route S1G beacons through the station/default-link RX path without regular-header station lookup. Avoid regular-header address reads in the mac80211 RX paths that process S1G extension beacons, including accept-frame, duplicate-detection, address-copy, and MLO address-translation paths. Also make ieee80211_get_bssid() length-safe before returning the S1G source-address pointer. | ||||
| CVE-2026-68453 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: Fix buffer over-read in cca_cipher2protkey Add validation of both the actual key buffer size and token length fields in all the cca_check_sec*token() functions. Additionally check in cca_gencipherkey() for possible underflow with returned key size. The CCA token structures contain user-controlled len fields that were used in operations without proper validation against both the actual buffer size and minimum token structure size. An attacker could set this field larger than the actual buffer size, leading to reading beyond buffer boundaries. This may result in a kernel crash or exposure of memory via sending this as part of a request down to the crypto card. Also an attacker could have used a very small len value and thus enforce a buffer under-run which may produce similar effects as a over-read. So now a key must - key buf length must be at least sizeof the token struct - the key len field inside the token must fit into the range of sizeof key token struct ... key buf length | ||||
| CVE-2026-68448 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ovl: check access to copy_file_range source with src mounter creds Commit 5dae222a5ff0c ("vfs: allow copy_file_range to copy across devices") allowed filesystems that implement the copy_file_range() f_op to decide if they want to access cross-sb copy from/to the same fs type. The same commit added checks to verify same sb copy for filesystems that implement ->copy_file_range() and do not support cross-sb copy at the time, namely, to ceph, fuse and nfs. The two remaining fs which implement ->copy_file_range(), cifs and overlayfs started to support cross-sb copy from this time. While overlayfs does support cross-sb copy when the two underlying files are on the same base fs, the copy operation on the two real files from two different overalyfs filesystems is performed with the mounter creds of the destination overlayfs and the read permission access hook for the source file was called with the wrong creds. This could cause either deny of access to copy which would otherwise be allowed (e.g. with splice) or allow read access to file which would otherwise be denied. Fix the latter case by explicitly verifying read access to source file with the source overlayfs mounter creds. The former case remains a quirk of cross-sb overlayfs copy, but userspace could fall back to regular copy so no harm done. | ||||
| CVE-2026-68447 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: clamp v9 CRIU control stack checkpoint copy to BO size CRIU checkpoint copies the MQD control stack using cp_hqd_cntl_stack_size from hardware without bounding it to the allocated BO region. If the HW field is larger than the queue's control stack allocation, memcpy reads past the BO into adjacent GTT memory and can leak kernel data to userspace. Store the page-aligned control stack BO size in mqd_manager and clamp checkpoint copies and reported checkpoint sizes to min(cp_hqd_cntl_stack_size, mm->ctl_stack_size). Apply the same bound for multi-XCC v9.4.3 checkpoint layout. (cherry picked from commit 6c2abd0ec09e86c6323010673766f76050e28aa3) | ||||
| CVE-2026-68409 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: defer link RX stats percpu free to RCU sta_remove_link() frees a removed MLO link's RX stats percpu buffer right away, but defers only the link container to RCU: sta_info_free_link(&alloc->info); kfree_rcu(alloc, rcu_head); The RX fast path reads link_sta under rcu_read_lock and writes the percpu stats. A reader that resolved link_sta before the removal keeps the pointer. The container stays alive from the kfree_rcu, so the read still works. But the percpu block it points to is already freed. This needs uses_rss. That is when pcpu_rx_stats exists. The full STA teardown frees the deflink stats only after synchronize_net(). The link removal path had no such barrier. The race is hard to win in practice, but the free should still wait for RCU. Free the link together with its data from a single RCU callback, so the percpu block is reclaimed only after readers drain. | ||||
| CVE-2026-68404 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: use wiphy work for socket owner autodisconnect nl80211_netlink_notify() walks the cfg80211 wireless device list when a NETLINK_GENERIC socket is released. If the socket owns a connection, the notifier queues the embedded wdev->disconnect_wk work item. That work is a plain work_struct today. NETDEV_GOING_DOWN cancels it, but a NETLINK_URELEASE notifier that already observed conn_owner_nlportid can queue it after that cancel returns. _cfg80211_unregister_wdev() then removes the wdev from the list and waits for RCU readers, but synchronize_net() does not drain work queued by such a reader. Make the autodisconnect work a wiphy_work instead. The callback already needs the wiphy mutex, and wiphy_work runs under that mutex. This lets teardown cancel pending autodisconnect work while holding the mutex, without a cancel_work_sync() vs. worker locking concern. Also cancel the wiphy work after list_del_rcu() and synchronize_net(). Any NETLINK_URELEASE notifier that had already reached the wdev list has then either queued the work and it is removed, or can no longer find the wdev. | ||||