| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix deadlock in complain-mode change_hat
The use of change_hat when in complain mode can cause a deadlock
when the hat doesn't exist and a new learning profile is created
for the missing profile. This is because change_hat() has taken
the lock to search the hat list and creating the new learning
profile needs to take the lock to add it to the list.
From the bug report:
Originally found in 7.0.0 in LTS ubuntu 26.04 with pam_apparmor + su
in complain mode set to change hats. Then verified in newest
available vanilla kernel I've compiled to see if still present:
7.2-rc7 vanilla -> affected
checked also some other kernels:
6.18.44 vanilla -> affected
6.12.95 with debian patches -> unaffected
On systems without bug (for example 6.12.95 debian) it just prints:
aa_change_hat rc=0
On systems with bug, the executable always hangs, prints nothing and
becomes unkillable. (And once stuck this way, it will cause any
further hat changes to also cause the changing process to get stuck)
Then in syslog you can find hint about cause:
kernel: INFO: task hat:3409 blocked for more than 483 seconds.
kernel: Not tainted 7.2.0-rc7 #1
kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
kernel: task:hat state:D stack:0 pid:3409 tgid:3409 ppid:2605 task_flags:0x400000 flags:0x00080800
kernel: Call Trace:
kernel: <TASK>
kernel: __schedule+0x48f/0xfe0
kernel: schedule+0x27/0xa0
kernel: schedule_preempt_disabled+0x15/0x30
kernel: __mutex_lock.constprop.0+0x569/0xa10
kernel: aa_new_learning_profile+0x15f/0x210
kernel: build_change_hat+0x19f/0x3b0
kernel: change_hat.isra.0+0x5dd/0xd60
kernel: aa_change_hat+0x2f3/0x710
kernel: aa_setprocattr_changehat+0x121/0x1f0
kernel: do_setattr+0x28c/0x340
kernel: apparmor_setselfattr+0x20/0x50
kernel: security_setselfattr+0xf6/0x110
kernel: __x64_sys_lsm_set_self_attr+0x53/0x90
kernel: do_syscall_64+0xdd/0x5e0
kernel: ? __mod_memcg_lruvec_state+0xfd/0x260
kernel: ? lruvec_stat_mod_folio+0x8d/0xd0
kernel: ? __folio_mod_stat+0x2d/0x90
kernel: ? map_anon_folio_pte_nopf+0xd1/0x1f0
kernel: ? do_anonymous_page+0x184/0xa10
kernel: ? __handle_mm_fault+0x805/0x870
kernel: ? count_memcg_events+0xef/0x230
kernel: ? handle_mm_fault+0x1f0/0x2f0
kernel: ? do_user_addr_fault+0x2bb/0x7b0
kernel: ? do_syscall_64+0x94/0x5e0
kernel: ? exc_page_fault+0x75/0x160
kernel: entry_SYSCALL_64_after_hwframe+0x76/0x7e
kernel: RIP: 0033:0x7f815e134c8d
kernel: RSP: 002b:00007fff6df94ea8 EFLAGS: 00000246 ORIG_RAX: 00000000000001cc
kernel: RAX: ffffffffffffffda RBX: 0000556d8c81d040 RCX: 00007f815e134c8d
kernel: RDX: 0000000000000046 RSI: 0000556d8c81d040 RDI: 0000000000000064
kernel: RBP: 00007fff6df94ef0 R08: 00007f815e212ac8 R09: 000000000000000c
kernel: R10: 0000000000000000 R11: 0000000000000246 R12: 0000556d8c81d010
kernel: R13: 0000000000000026 R14: 0000000000000046 R15: 0000000000000064
kernel: </TASK>
kernel: INFO: task hat:3409 is blocked on a mutex likely owned by task hat:3409.
To fix the issue, lift the locking out of the core of
aa_new_learning_profile(), introduce a wrapper function that takes the
lock where needed, and have build_change_hat() call the core function
that no longer takes the lock.
In addition fix 4 other issues introduced by commit
32e92764d6f8d ("apparmor: grab ns lock and refresh when looking up changehat child profiles")
- aa_get_profile_rcu() was replaced-by: aa_get_profile without the
accompanying rcu_dereference_protected()
- an extra aa_get_label(label) was introduced at the start of
change_hat() without an accompanying aa_put_label() causing a
reference count leak.
- a reference count leak was introduced in the label_is_stale(label)
case, where the newest profile would be leaked instead of the
label passed to the function.
- a potential UAF when the lookup walks up the tree with new_ns != ns
the new label refere
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ublk: avoid teardown retry loop on xarray allocation failure
__ublk_shmem_remove_ranges() removes matching maple tree ranges in
batches, but first stores each range into a temporary xarray so that the
pages can be unpinned after dropping the maple tree lock.
That temporary xarray is filled under the maple tree lock with
xa_store(..., GFP_ATOMIC). If the store fails before mas_erase(), the
current range is left in the tree and the helper returns false. The
outer ublk_shmem_remove_ranges() loop then immediately retries the same
range. While the atomic allocation keeps failing, the teardown path has
no forward progress.
The issue can be reproduced with radix_tree_node failslab injection after
a SHMEM_ZC buffer has already been registered:
# Kernel config:
# CONFIG_BLK_DEV_UBLK=y
# CONFIG_DEBUG_FS=y
# CONFIG_FAULT_INJECTION=y
# CONFIG_FAULT_INJECTION_DEBUG_FS=y
# CONFIG_FAILSLAB=y
echo 10 > /proc/sys/vm/nr_hugepages
mkdir -p /tmp/htlb
mount -t hugetlbfs none /tmp/htlb
fallocate -l 4M /tmp/htlb/ublk_buf
dev_id=$(kublk add -t null --shmem_zc \
--htlb /tmp/htlb/ublk_buf |
awk -F '[ :]' '/dev id/ {print $3}')
echo 1 > /sys/kernel/slab/radix_tree_node/failslab
echo Y > /sys/kernel/debug/failslab/cache-filter
echo Y > /sys/kernel/debug/failslab/ignore-gfp-wait
echo 1 > /sys/kernel/debug/failslab/interval
echo -1 > /sys/kernel/debug/failslab/times
echo 100 > /sys/kernel/debug/failslab/probability
kublk del -n "$dev_id"
On the unfixed kernel the delete command was still running after 3
seconds. Disabling failslab made it return. The fault-injection stack
showed:
should_failslab
kmem_cache_alloc_lru_noprof
__xas_nomem
__xa_store
xa_store
__ublk_shmem_remove_ranges
ublk_cdev_rel
ublk_ctrl_del_dev
Remove the allocation from the teardown loop. Keep the existing batch
limit, but collect {base_pfn, nr_pages} pairs in a fixed-size stack array.
Once a matching range is found, the range is erased from the maple tree
before dropping the lock, so each successful scan makes progress without
depending on any GFP_ATOMIC allocation.
With the same failslab settings, the fixed kernel completed
"kublk del -n $dev_id" successfully in about 45 ms. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86/intel/uncore: Fix uncore_box ref/unref ordering
In uncore_event_cpu_online(), uncore_box_ref() was called before
uncore_change_context(). uncore_box_ref() gates on box->cpu >= 0,
but box->cpu is still -1 at that point because uncore_change_context()
has not run yet. As a result, the box is never initialized on the
first CPU to come online in a die, leaving it permanently
uninitialized in the single-CPU-per-die case.
Thus, box->refcnt is one count below the true value, and in the CPU
offline path, the box will be torn down on the second-to-last CPU.
In uncore_event_cpu_offline(), uncore_box_unref() was called after
uncore_change_context(), so box->cpu is already -1 when the collector
CPU goes offline, which prevents it from tearing down the box.
Fix by swapping the call order in both paths so that
uncore_box_{ref,unref}() runs at the point where box->cpu reflects
the correct context.
Move allocate_boxes() out of uncore_box_ref() to enable this
reordering. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: fsl_audmix: rework runtime PM handling in probe
After pm_runtime_enable() the AUDMIX block is powered off and stays
suspended until the first runtime resume. Register writes issued between
probe() and the first resume (e.g. from DAPM or ALSA control paths)
target unpowered hardware and cause a system hang.
Fix this by calling pm_runtime_resume_and_get() immediately after
pm_runtime_enable() to power the hardware up and enable its clocks.
Release the reference afterwards with pm_runtime_put() to allow the
runtime PM framework to suspend the device and switch the regmap to
cache-only mode when idle.
When CONFIG_PM is disabled or runtime PM is not enabled, pm_runtime_*
calls are stubs that do not power up the hardware. Handle this case
explicitly by calling fsl_audmix_runtime_resume() directly so the
hardware is always initialised and its clocks are enabled, ensuring
register accesses succeed regardless of PM configuration. |
| go-openapi/swag jsonutils before 0.27.1 contains a stack overflow vulnerability in ordered JSON parsing and serialization due to unbounded recursion with no depth limit. Remote unauthenticated attackers can submit deeply nested JSON documents to services accepting OpenAPI specifications, causing fatal stack overflow that terminates the process and all in-flight requests. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: rk3288 - fail ahash requests on HASH idle timeout
rk_hash_run() waits for RK_CRYPTO_HASH_STS to become idle after the
final DMA transfer, but ignores the poll result. If the hash engine
never becomes idle, the driver still reads the digest registers and
finalizes the request with the previous success value.
Store the poll result and finalize the request with the timeout error
before reading the digest registers. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/mbox: Break poison list loop on an empty payload
A device that returns count == 0 with CXL_POISON_FLAG_MORE set on every
iteration never advances nr_records, so the max_errors guard never
trips and the do/while loops forever while holding poison.mutex. That
hangs the sysfs-triggered scan thread and blocks all subsequent poison
operations on the device. The existing "Protect against an uncleared
_FLAG_MORE" guard was intended to bound a misbehaving device but does
not cover the count == 0 case.
Stop the loop on an empty payload so a malfunctioning or malicious
device cannot wedge the poison scan. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: bound TLV walk in mt7996_mcu_get_chip_config
The response TLV loop advanced by tlv->len without a minimum, so a
theoretical firmware response containing a zero-length TLV could spin
forever, hanging the CPU during device probe.
The u32 payload was also read without bounds checking.
Reject a short fixed field, stop on a TLV whose length underruns the
header or overruns the skb. |
| In the Linux kernel, the following vulnerability has been resolved:
md/bitmap: resume array on backlog_store() error path
backlog_store() suspends the array before checking whether a write-mostly
device exists. If no such device exists, the error path only unlocks
reconfig_mutex and leaves the array suspended, blocking subsequent I/O.
Use mddev_unlock_and_resume() to release both states. |
| In the MISP sachertortephp library, the Xml::build() static method in lib/Cake/Utility/Xml.php contains a logic error in the conditional that gates network-based XML fetching. The original condition was written as: $options['readFile'] && strpos($input, 'http://') === 0 || strpos($input, 'https://') === 0. Because PHP's && operator has higher precedence than ||, the expression is evaluated as ($options['readFile'] && strpos($input, 'http://') === 0) || strpos($input, 'https://') === 0. As a result, when a caller explicitly sets the readFile option to false to disable file and URL reading, an input string beginning with https:// still satisfies the condition and triggers a network fetch via HttpSocket (configured to follow up to 10 redirects). The http:// branch is correctly gated by the readFile flag, but the https:// branch is not. An attacker who can influence the $input parameter passed to Xml::build() can therefore force the application to issue an outbound HTTPS request to an attacker-controlled or internal URL, even though the caller intended to suppress all remote reads. The fetched response is parsed as XML and may be returned to the caller, enabling information disclosure from internal services or external targets. This constitutes a Server-Side Request Forgery (SSRF) weakness with an information-disclosure impact. The vulnerability requires that the code path in Xml::build() be reachable with attacker-controlled input and that the readFile option be set to false (or the caller expects it to be false). |
| google-protobuf contains an unbounded recursion when parsing unknown protobuf group fields. An attacker can send a small crafted payload of deeply nested START_GROUP wire bytes to any Node.js service that calls the generated deserializeBinary() API, causing a RangeError: Maximum call stack size exceeded and crashing the process. No authentication or prior knowledge of the schema is required. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to avoid potential deadloop in f2fs_fsync_node_pages()
There is potential deadloop in race condition:
Thread A Thread B
- fsync
- f2fs_do_sync_file
- f2fs_fsync_node_pages
- last_fsync_dnode
- folio_get(last_folio)
- f2fs_setattr
- f2fs_truncate
- f2fs_truncate_blocks
- f2fs_do_truncate_blocks
- f2fs_truncate_inode_blocks
- truncate_dnode
- truncate_node
- invalidate_mapping_pages
- folio->mapping = NULL
- is_node_folio alwasy return false
- atomic && !marked is always true,
then goto retry |
| In the Linux kernel, the following vulnerability has been resolved:
media: video-i2c: fix kthread error pointer left in kthread_vid_cap on failure
kthread_run() returns an ERR_PTR on failure, not NULL.
When start_streaming() fails, data->kthread_vid_cap is left holding
this error pointer instead of being cleared.
This causes two subsequent bugs:
1. A future call to start_streaming() sees a non-NULL kthread_vid_cap
and returns 0 (success) immediately, without actually starting the
capture thread.
2. A call to stop_streaming() checks 'kthread_vid_cap == NULL' which
is false for an error pointer, and proceeds to call kthread_stop()
on the error pointer, leading to a kernel crash.
Fix this by resetting kthread_vid_cap to NULL on failure before
jumping to the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: light: ltrf216a: fix runtime PM reference leak in error path
ltrf216a_get_lux() acquires a runtime PM reference by calling
ltrf216a_set_power_state(data, true). However, if
ltrf216a_read_data() fails, the function returns immediately without
dropping the reference.
This leaves the runtime PM usage count unbalanced, preventing the device
from autosuspending after a failed read.
Fix this by releasing the runtime PM reference before returning from the
error path. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: dat: avoid unaligned fault in IP extraction
Independent of the alignment of the ARP packet in the SKB, either the
batadv_arp_ip_src or the batadv_arp_ip_dst will have an unaligned access
(on HW without native unaligned read support).
Use get_unaligned() to handle this properly on all architectures. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: pm8001: Use rollback index when freeing MSI-X vectors
pm8001_request_msix() unwinds previously registered handlers with
free_irq() when request_irq() fails. The rollback loop uses the failing
index i for every iteration instead of the already registered vector
index j.
That passes the wrong IRQ/dev_id pair to free_irq() and leaves the
earlier handlers installed. Use j for both pci_irq_vector() and the
matching irq_vector entry in the rollback loop. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/mempolicy: fix sleeping allocation in alloc_pages_bulk_weighted_interleave()
syzbot reported a sleeping function called from invalid context splat in
bucket_table_alloc().
When rhashtable_insert_slow() rehashes the table under rcu_read_lock(), it
calls bucket_table_alloc(..., GFP_ATOMIC | __GFP_NOWARN). If the bucket
table allocation uses vmalloc, __vmalloc_node_range_noprof() invokes
vm_area_alloc_pages() -> alloc_pages_bulk_mempolicy_noprof() with the
passed GFP_ATOMIC flags.
If the current task has an MPOL_WEIGHTED_INTERLEAVE mempolicy,
alloc_pages_bulk_weighted_interleave() is called and currently hardcodes
GFP_KERNEL when allocating the temporary weights array, triggering a
might_alloc() splat in atomic/RCU contexts.
Pass the gfp flags (masked with GFP_RECLAIM_MASK to strip page-allocator
zone modifiers like __GFP_HIGHMEM) received by
alloc_pages_bulk_weighted_interleave() to kmalloc() instead of hardcoding
GFP_KERNEL. Since the weights buffer is immediately initialized in full,
kmalloc() is sufficient. |
| A specially crafted packet can cause the premature expiry of multicast forwarding state on affected interfaces, potentially resulting in temporary multicast traffic loss during the affected period. |
| docx4j is an open source Java library for creating, editing, and saving OpenXML packages, including DOCX, PPTX, and XLSX files. Prior to 11.5.14, PropertyResolver and adjacent helpers recursively follow the WordprocessingML w:basedOn style inheritance chain without cycle detection. A well-formed DOCX containing mutually based styles causes unbounded recursion in PropertyResolver.fillPPrStack and related effective-style resolution paths, resulting in StackOverflowError. Server-side conversion and table-of-contents processing of an untrusted document can terminate a worker thread, degrade a thread pool, or deny service, although isolation in disposable workers or safe containment of StackOverflowError can reduce the practical effect. The fix adds cyclic-style tracking and CyclicStylesException handling. This issue is fixed in version 11.5.14. |
| QDomDocument XML parsing is vulnerable to a remotely-triggerable denial-of-service crash when processing untrusted input. |
