| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bridge: Fix sleep in atomic context in netlink path
Since the introduction of the netlink configuration path for bridge
ports in commit 25c71c75ac87 ("bridge: bridge port parameters over
netlink"), br_setport() was always called with the bridge lock held
around it. Back then this decision made sense: The bridge lock protects
the STP state of the bridge and its ports and at that time the function
only processed three STP related netlink attributes (cost, priority and
state).
Nowadays, br_setport() processes a lot more attributes and most of them
do not need the bridge lock:
* Bridge flags: Only require RTNL. Read locklessly by the data path.
Annotations can be added in net-next.
* FDB port flushing: Only requires the FDB lock.
* Multicast attributes: Only require the multicast lock.
* Group forward mask: Only requires RTNL. Read locklessly by the data
path. Annotations can be added in net-next.
* Backup port and NHID: Only require RTNL. Read locklessly by the data
path.
This is a problem as the bridge calls dev_set_promiscuity() when certain
bridge port flags change and this function can sleep since the commit
cited below, resulting in a splat such as [1].
Fix this by reducing the scope of the bridge lock and only take it when
processing the three STP related attributes that require it. This is
consistent with the multicast attributes where each attribute acquires
the multicast lock instead of having one critical section for all
relevant attributes.
[1]
BUG: sleeping function called from invalid context at net/core/dev_addr_lists.c:1262
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 356, name: bridge
preempt_count: 201, expected: 0
RCU nest depth: 0, expected: 0
2 locks held by bridge/356:
#0: ffffffff919473a0 (rtnl_mutex){+.+.}-{4:4}, at: rtnetlink_rcv_msg (net/core/rtnetlink.c:80 net/core/rtnetlink.c:7002)
#1: ffff888115072d58 (&br->lock){+...}-{3:3}, at: br_setlink (./include/linux/spinlock.h:348 net/bridge/br_netlink.c:1117)
Preemption disabled at:
0x0
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120)
__might_resched.cold (kernel/sched/core.c:9163)
netif_rx_mode_run (net/core/dev_addr_lists.c:1262)
netif_rx_mode_sync (net/core/dev_addr_lists.c:1428)
dev_set_promiscuity (net/core/dev_api.c:289)
br_manage_promisc (net/bridge/br_if.c:135 net/bridge/br_if.c:172)
br_port_flags_change (net/bridge/br_if.c:242 net/bridge/br_if.c:747)
br_setport (net/bridge/br_netlink.c:1000)
br_setlink (net/bridge/br_netlink.c:1118)
rtnl_bridge_setlink (net/core/rtnetlink.c:5572)
rtnetlink_rcv_msg (net/core/rtnetlink.c:7005)
netlink_rcv_skb (net/netlink/af_netlink.c:2550)
netlink_unicast (net/netlink/af_netlink.c:1318 net/netlink/af_netlink.c:1344)
netlink_sendmsg (net/netlink/af_netlink.c:1894)
__sock_sendmsg (net/socket.c:787 (discriminator 4) net/socket.c:802 (discriminator 4))
____sys_sendmsg (net/socket.c:2698)
___sys_sendmsg (net/socket.c:2752)
__sys_sendmsg (net/socket.c:2784)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) |
| Electron is a framework for writing cross-platform desktop applications using JavaScript, HTML and CSS. Prior to 40.10.6, 41.9.1, 42.5.1, and 43.0.0, when a custom protocol handler returned a ProtocolResponse with a url and no session, Electron made the upstream request through defaultSession instead of the session that handled the protocol. A cached response could then be reused across otherwise isolated session partitions. Apps that use ProtocolResponse.url, omit ProtocolResponse.session, and rely on separate sessions to isolate content are affected. This issue is fixed in versions 40.10.6, 41.9.1, 42.5.1, and 43.0.0. |
| The sandbox that isolates document conversion on a Kiteworks appliance did not fully confine the code running inside it. Code already executing within that sandbox could potentially escape its confinement and act with the privileges of the service account that runs the application, which could allow an attacker in that position to read or modify application data and configuration, or to disrupt the service on the affected appliance. |
| vLLM is an inference and serving engine for large language models. Prior to 0.30.0, the /inference/v1/generate endpoint in the disaggregated scale-out path accepts caller-supplied tensors in the features.kwargs_data field, cache identifiers in the features.mm_hashes field, ranges in the features.mm_placeholders field, and wire-selected multimodal field processors without rebinding them to the active model renderer contract. Forged grid geometry, field types, or non-positive placeholder lengths can terminate the shared EngineCore; when an attacker knows or can induce a victim's content hash, forged cache hashes can poison or retrieve cross-request encoder-cache state; and dropped sparse placeholder masks can alter replayed transport semantics. This issue is fixed in version 0.30.0. |
| Python's elementtree C accelerator failed to initialise Expat's hash salt during initialization. This could make it easy to conduct denial of service attacks against Expat by constructing an XML document that would cause pathological hash collisions in Expat's internal data structures, consuming large amounts CPU and RAM. The vulnerability exists in Python versions 3.7.0, 3.6.0 through 3.6.6, 3.5.0 through 3.5.6, 3.4.0 through 3.4.9, 2.7.0 through 2.7.15. |
| Docling simplifies document processing by parsing diverse formats and providing integrations with the generative AI ecosystem. From 2.83.0 until 2.131.0, the KServeV2OcrModel class defined in docling/models/stages/ocr/kserve_v2_ocr_model.py sends page images to its configured endpoint without checking the pipeline_options.enable_remote_services setting, even when the caller sets that policy control to false. The StandardPdfPipeline._make_ocr_model method also fails to pass the flag into the OCR factory, allowing remote OCR processing in configurations that rely on remote services being disabled. The destination is configured by the caller rather than selected by an attacker. This issue is fixed in 2.131.0. |
| In sshd in OpenSSH before 10.6, credentials can incorrectly persist after failure of a GSSAPIAuthentication authentication attempt. |
| MISP contains a defect in its event save workflow that prevents the correlation engine from recalculating correlations when an event's distribution level or sharing group is modified.
When a user edits an existing event and changes its distribution or sharing_group_id, the internal before-save hook stored the incoming (new) data rather than the previously persisted values. As a result, the after-save comparison that determines whether a correlation refresh is needed never detected the change, and stale correlations persisted.
Security impact:
- Stale correlations may continue to expose event data to users in a broader sharing group after the event has been moved to a more restrictive group, resulting in unintended information disclosure.
- Conversely, newly relevant correlations may not appear after a distribution widening, degrading the completeness of threat intelligence sharing.
Preconditions:
- An authenticated user with write access to at least one MISP event.
- The user modifies the event's distribution or sharing_group_id field.
Affected versions: <2.5.48 |
| NetBox versions 2.9.5 before 4.7.0 contain a server-side template injection vulnerability that allows a low-privileged user with the "Can add custom links" permission to steal session cookies and API tokens of other users by exposing the raw Django HttpRequest object to the Jinja2 template context. Attackers can craft a custom link template embedding request.COOKIES['sessionid'] or a user's API token into an img src URL, which bypasses the clean_html sanitizer and auto-exfiltrates the victim's credentials to an attacker-controlled host when a privileged user views the object, enabling full account takeover. |
| In the Linux kernel, the following vulnerability has been resolved:
net: psp: avoid conflicts with skb->decrypted and sk_validate_xmit_skb()
PSP conflicts with TLS ULP in its usage of both skb->decrypted and
sk->sk_validate_xmit_skb().
Make PSP mutually exclusive with TLS ULP, the only other user of either
of these. As other users of skb->decrypted come along, they can be added
to sk_has_decrypt_user(). It would make sense to also assert that
sk->sk_validate_xmit_skb() is also NULL in both of these setup paths for
similar future proofing, but the PSP listener/sk_clone() path is still
broken and it could be seen as a regression to not allow rx assoc to run
on a child of a listener socket with PSP tx assoc state.
Include all TCP ULPs in the sk_has_decrypt_user() check, even though TLS
is the only one that conflicts with PSP via the decrypted bit. This is
intentional because PSP was not designed to be used with ULPs. It is
best to close off surface area that may make bugs reachable, until
someone wishes to design and test an actual user of PSP with ULPs. |
| BuildKit may be tricked into performing file actions with special file inodes where regular files are expected. Special files may block operations or, on rootful workers, allow unintended host device access. |
| Pexip Infinity before 38.2, plus 39.0, 39.1, and 40.0, is affected by improper input validation within an internal Pexip Infinity service that allows an attacker with local access to escalate privileges to root. Exploitation requires an attacker to be able to run arbitrary code on a node by either achieving remote code execution via some other vulnerability or having administrative access to the operating system. |
| Nezha Dashboard from 1.8.0 before 2.3.13 contains an improper locking vulnerability where a non-deferred mutex unlock leaks on a nil-map panic path. Any authenticated non-admin member can issue four notification API calls to permanently deadlock the alerting subsystem, then exhaust memory with blocking requests. |
| Improper initialization in an ASUS certain motherboard allows an physically proximate user to read or write arbitrary memory by inserting a specially crafted device.
Refer to the '
Security Update for Multiple ASUS Motherboards ' section on the ASUS Security Advisory for more information. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-fc: Do not cancel requests in io target before it is initialized
A new nvme-fc controller in CONNECTING state sees admin request timeout
schedules ctrl->ioerr_work to abort inflight requests. This ends up
calling __nvme_fc_abort_outstanding_ios() which aborts requests in both
admin and io tagsets. In case fc_ctrl->tag_set was not initialized we
see the warning below. This is because ctrl.queue_count is initialized
early in nvme_fc_alloc_ctrl().
nvme nvme0: NVME-FC{0}: starting error recovery Connectivity Loss
INFO: trying to register non-static key.
The code is fine but needs lockdep annotation, or maybe
lpfc 0000:ab:00.0: queue 0 connect admin queue failed (-6).
you didn't initialize this object before use?
turning off the locking correctness validator.
Workqueue: nvme-reset-wq nvme_fc_ctrl_ioerr_work [nvme_fc]
Call Trace:
<TASK>
dump_stack_lvl+0x57/0x80
register_lock_class+0x567/0x580
__lock_acquire+0x330/0xb90
lock_acquire.part.0+0xad/0x210
blk_mq_tagset_busy_iter+0xf9/0xc00
__nvme_fc_abort_outstanding_ios+0x23f/0x320 [nvme_fc]
nvme_fc_ctrl_ioerr_work+0x172/0x210 [nvme_fc]
process_one_work+0x82c/0x1450
worker_thread+0x5ee/0xfd0
kthread+0x3a0/0x750
ret_from_fork+0x439/0x670
ret_from_fork_asm+0x1a/0x30
</TASK>
Update the check in __nvme_fc_abort_outstanding_ios() confirm that io
tagset was created before iterating over busy requests. Also make sure
to cancel ctrl->ioerr_work before removing io tagset. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/vfio-ap: Fix missing lock required to access list of ap_matrix_mdev objects
In order to traverse or add/remove ap_matrix_mdev objects in the
matrix_dev->mdev_list, the matrix_dev->guests_lock mutex must be held.
There are two functions that access the list without holding the mutex:
vfio_ap_mdev_probe function
~~~~~~~~~~~~~~~~~~~~~~~~~~~
The vfio_ap_mdev_probe function uses the matrix_dev->mdevs_lock
mutex to guard the add of a newly created ap_matrix_mdev object to the
matrix_dev->mdev_list. This mutex does not protect list access; its purpose
is to guard against concurrent access to fields contained in an
ap_matrix_mdev object. This could lead to kernel memory corruption or
use-after-free if another mdev is created or removed concurrently.
The adding of an ap_matrix_mdev object to matrix_dev->mdev_list
is now guarded by the matrix_dev->guests_lock which is the correct
way to protect against concurrent mdev_list access.
Also removed the following two lines of code because the matrix_mdev is
allocated via vfio_alloc_device macro which uses kzalloc, so req_trigger
and cfg_chg_trigger are already zero-initialised when the struct is
allocated before the call to vfio_register_emulated_iommu_dev. This
prevents a window whereby these triggers are set to NULL after
the device is exposed to userspace.
matrix_mdev->req_trigger = NULL;
matrix_mdev->cfg_chg_trigger = NULL;
vfio_ap_mdev_for_queue function
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The status_show function that supports display of the status attribute of
the devices in /sys/bus/ap/devices calls the vfio_ap_mdev_for_queue
function which iterates the matrix_dev->mdev_list to find the object
representing the queue device whose status is to be displayed. In order to
traverse this list, the matrix_dev->guests_lock mutex must be held.
To fix this, the guests_lock mutex is taken prior to taking the
matrix_dev->mdevs_lock mutex in the status_show function. It is taken
there rather than the vfio_ap_mdev_for_queue function - where it is
needed - because it must be taken prior to the mdevs_lock mutex in order to
adhere to the proper locking order and prevent a lockdep splat; also
because the mdevs_lock is needed there to access fields within
the matrix_mdev object in that function.
See the vfio-ap-locking.rst in the linux kernel tree. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to clear dirty flag on folio in error path
If node block is corrupted due to chksum mismatch or inconsistent
footer info, it needs to drop clear flag of node folio, in order
to persist inconsistent node data to storage. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: avoid force-completing uninitialized UVD rings
uvd_v7_0_sw_init() does not initialize the UVD decode ring for an
SR-IOV VF. However, amdgpu_uvd_resume() unconditionally force-completes
the decode ring when restoring its fence sequence.
Skip fence completion when the fence driver is not initialized. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: xhci: bail out of setup if the controller is inaccessible
xhci_gen_setup() locates the operational registers using the capability
length read from the very first register:
xhci->op_regs = hcd->regs +
HC_LENGTH(readl(&xhci->cap_regs->hc_capbase));
If the controller is dead or has dropped off the bus, that read returns
~0, HC_LENGTH() truncates it to 0xff, and op_regs ends up 0xff bytes
past the page-aligned MMIO base, i.e. unaligned. The first access
through it, xhci_halt() -> xhci_handshake() reading op_regs->status, is
then an unaligned readl() on device memory. arm64 faults on unaligned
device accesses, so instead of xhci_handshake() catching the all-ones
value and returning -ENODEV, setup oopses:
xhci-pci-renesas 0005:08:00.0: Unable to change power state from D3cold to D0, device inaccessible
xhci-pci-renesas 0005:08:00.0: xHCI Host Controller
xhci-pci-renesas 0005:08:00.0: new USB bus registered, assigned bus number 1
Unable to handle kernel paging request at virtual address ffff80030a770103
ESR = 0x0000000096000021
FSC = 0x21: alignment fault
Internal error: Oops: 0000000096000021 [#1] SMP
pc : xhci_halt [xhci_hcd]
Call trace:
xhci_halt
xhci_gen_setup
xhci_pci_setup
usb_add_hcd
usb_hcd_pci_probe
xhci_pci_common_probe
xhci_pci_renesas_probe
This was hit with a Renesas uPD720201 that failed to power up ("Unable
to change power state from D3cold to D0, device inaccessible") yet still
reached the HCD probe path.
Read the capability register once, and if it reads back the all-ones
value (as xhci_handshake() and xhci_reset() already test for), abort
setup with -ENODEV before op_regs is derived from it. Reading it once
also avoids re-reading a register that may change under a concurrent
hot-removal. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mei: pass correct argument to function
The first argument to iwl_mei_write_cyclic_buf() should be the cldev
but the q_head pointer is passed instead. Fix it. |
