| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: reject user command submission without a command BO
amdxdna_drm_submit_execbuf() passes the user-supplied command BO handle
straight into amdxdna_cmd_submit() with drv_cmd == NULL. When the handle
is AMDXDNA_INVALID_BO_HANDLE (0), the block that fetches job->cmd_bo is
skipped, leaving it NULL, and no check rejects it on the user path (the
!job->cmd_bo guard lives inside the != INVALID branch).
The job is then armed and pushed to the DRM scheduler.
aie2_sched_job_run() takes the drv_cmd == NULL path and calls
amdxdna_cmd_set_state(job->cmd_bo) -> amdxdna_gem_vmap(NULL) ->
to_gobj(NULL)->dev, a NULL pointer dereference in the drm_sched worker.
A process with access to the accel node on a system with a probed AMD NPU
can trigger a kernel oops with a single AMDXDNA_EXEC_CMD ioctl
(cmd_handles = 0).
Only internal driver commands (SYNC_DEBUG_BO / ATTACH_DEBUG_BO)
legitimately pass AMDXDNA_INVALID_BO_HANDLE, and they always set drv_cmd.
Reject the invalid handle for user submissions (drv_cmd == NULL) at the
submit choke point so every user path is covered.
Found by 0sec automated security-research tooling (https://0sec.ai). |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: Handle TC_ACT_REDIRECT from qdisc filter chains
When a TC filter attached to a qdisc filter chain returns
TC_ACT_REDIRECT (ex: via an eBPF program calling bpf_redirect() or an
act_bpf action), the redirect was silently lost i.e no qdisc classify
function handled TC_ACT_REDIRECT, so the packet fell through the
switch and was enqueued normally instead of being redirected.
This has been broken since bpf_redirect() was introduced for TC in
commit 27b29f63058d ("bpf: add bpf_redirect() helper"). We got lucky
for a long time because bpf_net_context was a per-CPU variable that
was always available.
commit 401cb7dae813 ("net: Reference bpf_redirect_info via task_struct
on PREEMPT_RT.") turned bpf_net_context into a task_struct member that
is only set up by explicit callers. Without a caller setting it up,
bpf_redirect() itself crashes with a NULL pointer dereference in
bpf_net_ctx_get_ri(). However, even with bpf_net_context available,
TC_ACT_REDIRECT from qdisc filter chains cannot be honored without
adding skb_do_redirect() calls to every qdisc classify function, which
would require changes across net/sched/. Isolate it to ebpf core where
it belongs.
Instead, add a tcf_classify_qdisc() inline helper in pkt_cls.h, as a
wrapper around tcf_classify() for use by qdisc classify functions and
tcf_qevent_handle(). When the classify verdict is TC_ACT_REDIRECT,
the wrapper converts it to TC_ACT_SHOT, dropping the packet rather
than letting it continue silently. Dropping is preferred over
letting the packet through because the user immediately sees packet
loss. Silently passing the packet through would hide the problem and
leave the user wondering why their redirect is not working.
The clsact fast path, tc_run() continues to call tcf_classify() directly
and is unaffected: TC_ACT_REDIRECT is returned as-is and handled by
sch_handle_egress/ingress() calling skb_do_redirect() as before. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Handle partially initialized auxiliary devices
bnxt_aux_devices_init() calls auxiliary_device_init() before all fields
used by bnxt_aux_dev_release() are initialized. After
auxiliary_device_init() succeeds, later errors must unwind with
auxiliary_device_uninit(), which invokes the release callback.
The release callback assumes that aux_priv->id, aux_priv->edev,
edev->net and edev->ulp_tbl are all populated. If allocation fails
after auxiliary_device_init(), the release path can otherwise dereference
or clear partially initialized state.
Allocate and attach the bnxt_en_dev and ULP table before calling
auxiliary_device_init(), so the release callback only sees a fully
initialized auxiliary private object. If auxiliary_device_init() itself
fails, free those allocations directly because device_initialize() has not
run and the release callback will not be invoked.
This issue was found by a static analysis checker and confirmed by manual
source review. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/vf: Add drm_dev guards when detaching CCS read/write buffers
CCS read/write buffers are freed during BO destruction. In some cases,
BOs may be destroyed after the device is unbound but while the DRM
structure remains valid, leading to NULL pointer dereferences when
accessing device resources.
BUG: kernel NULL pointer dereference, address: 0000000000000000
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 0 UID: 0 PID: 9376 Comm: xe_pat Not tainted 7.2.0-rc2+ #1 PREEMPT(lazy)
RIP: 0010:xe_sriov_vf_ccs_rw_update_bb_addr+0x4d/0xa0 [xe]
RSP: 0018:ffffcf304110b9c8 EFLAGS: 00010246
RAX: ffff8a85c38a0a00 RBX: 00000000810ef000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8a85c39c1888
RBP: ffffcf304110b9e8 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8a85c39c1888
R13: 0000000000000000 R14: ffff8a85c39b4f28 R15: ffff8a85c3885000
FS: 0000000000000000(0000) GS:ffff8a878b809000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000010314a002 CR4: 0000000000772ef0
PKRU: 55555554
Call Trace:
<TASK>
xe_migrate_ccs_rw_copy_clear+0x98/0x120 [xe]
xe_sriov_vf_ccs_detach_bo+0x2c/0x60 [xe]
xe_ttm_bo_delete_mem_notify+0xc8/0xe0 [xe]
ttm_bo_cleanup_memtype_use+0x26/0x80 [ttm]
ttm_bo_release+0x29e/0x2d0 [ttm]
ttm_bo_fini+0x39/0x70 [ttm]
xe_gem_object_free+0x1f/0x30 [xe]
drm_gem_object_free+0x1d/0x40
ttm_bo_vm_close+0x5f/0x90 [ttm]
remove_vma+0x2c/0x70
tear_down_vmas+0x63/0xf0
exit_mmap+0x20d/0x3f0
__mmput+0x45/0x170
mmput+0x31/0x40
do_exit+0x2ba/0xac0
do_group_exit+0x2d/0xb0
__x64_sys_exit_group+0x18/0x20
x64_sys_call+0x14a0/0x2390
do_syscall_64+0xdd/0x640
? count_memcg_events+0xea/0x240
? handle_mm_fault+0x1ec/0x2f0
(cherry picked from commit 1ae415a6eefe5004954a1d352b1718faca8844ef) |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: fix max_vport related crash on allocation error during init
Set adapter->max_vports only after successful allocation of vports, netdevs
and vport_config buffers. This fixes possible crashes on reset or rmmod,
following failed allocation on init
[ 305.981402] idpf 0000:83:00.0: enabling device (0100 -> 0102)
[ 305.994464] idpf 0000:83:00.0: Device HW Reset initiated
[ 320.416872] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 320.416918] #PF: supervisor read access in kernel mode
[ 320.416942] #PF: error_code(0x0000) - not-present page
[ 320.416963] PGD 2099657067 P4D 0
[ 320.416983] Oops: Oops: 0000 [#1] SMP NOPTI
...
[ 320.417093] RIP: 0010:idpf_remove+0x118/0x200 [idpf]
[ 320.417130] Code: 8b bb 98 09 00 00 e8 17 0f 5b e5 48 8b bb e8 08 00 00 e8 0b 0f 5b e5 66 83 bb 28 06 00 00 00 48 8b bb 20 06 00 00 74 49 31 ed <48> 8b 04 ef 48 85 c0 74 2f 48 8b 78 20 e8 66 58 91 e5 48 8b 83 20
[ 320.417183] RSP: 0018:ff7322212903fdb8 EFLAGS: 00010246
[ 320.417205] RAX: 0000000000000000 RBX: ff4463de40300000 RCX: ff7322212903fd4c
[ 320.417228] RDX: 0000000000000001 RSI: ffffffffa7f7d100 RDI: 0000000000000000
[ 320.417250] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
[ 320.417272] R10: 0000000000000001 R11: ff4463de3a638f58 R12: ff4463be89ac7000
[ 320.417294] R13: ff4463be89ac7198 R14: ff4463be94fc7198 R15: ffffffffc0f10f20
[ 320.417317] FS: 00007f963c0e6740(0000) GS:ff4463fdd65d8000(0000) knlGS:0000000000000000
[ 320.417342] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 320.417362] CR2: 0000000000000000 CR3: 00000020ba674002 CR4: 0000000000773ef0
[ 320.417385] PKRU: 55555554
[ 320.417398] Call Trace:
[ 320.417412] <TASK>
[ 320.417429] pci_device_remove+0x42/0xb0
[ 320.417459] device_release_driver_internal+0x1a9/0x210
[ 320.417492] driver_detach+0x4b/0x90
[ 320.417516] bus_remove_driver+0x70/0x100
[ 320.417539] pci_unregister_driver+0x2e/0xb0
[ 320.417564] __do_sys_delete_module.constprop.0+0x190/0x2f0
[ 320.417592] ? kmem_cache_free+0x31e/0x550
[ 320.417619] ? lockdep_hardirqs_on_prepare+0xde/0x190
[ 320.417644] ? do_syscall_64+0x38/0x6b0
[ 320.417665] do_syscall_64+0xc8/0x6b0
[ 320.417683] ? clear_bhb_loop+0x30/0x80
[ 320.417706] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 320.417727] RIP: 0033:0x7f963bb30beb |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/gt: Fix NULL deref on sched_engine alloc failure
Avoid using intel_context_put() before intel_context_init() in
execlists_create_virtual() as the kref_put() inside would lead
to NULL deref on the IOCTL path when sched_engine allocation fails.
Discovered using AI-assisted static analysis confirmed by
Intel Product Security.
(cherry picked from commit 4f2a12f2d50e9f48227656e4dcbd6423506be31d) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix kernel panic during driver load failure
Avoid kernel panic if MES init fails during driver load. The KIQ ring is
falsely marked as ready as ASICs that use MES, KIQ is owned by MES.
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:gfx_v12_1_wait_reg_mem+0x5a/0x1f0 [amdgpu]
Call Trace:
gfx_v12_1_ring_emit_reg_write_reg_wait+0x1f/0x30 [amdgpu]
amdgpu_gmc_fw_reg_write_reg_wait+0xb2/0x190 [amdgpu]
amdgpu_gmc_flush_gpu_tlb+0x1cc/0x230 [amdgpu]
amdgpu_gart_invalidate_tlb+0x81/0xa0 [amdgpu]
amdgpu_gart_unbind+0x72/0x90 [amdgpu]
amdgpu_ttm_backend_unbind+0xa4/0xb0 [amdgpu]
amdgpu_ttm_tt_unpopulate+0x13/0xd0 [amdgpu]
amdttm_tt_unpopulate+0x29/0x70 [amdttm]
ttm_bo_put+0x1eb/0x360 [amdttm]
amdgpu_bo_free_kernel+0xf9/0x1f0 [amdgpu]
amdgpu_ih_ring_fini+0x5a/0x90 [amdgpu]
amdgpu_irq_fini_hw+0x58/0x80 [amdgpu]
amdgpu_device_fini_hw+0x4e0/0x5b0 [amdgpu]
amdgpu_driver_load_kms+0x60/0xa0 [amdgpu]
amdgpu_pci_probe+0x28e/0x6d0 [amdgpu]
pci_device_probe+0x19f/0x220
really_probe+0x1ed/0x340
driver_probe_device+0x1e/0x80
__driver_attach+0xd3/0x1a0
bus_for_each_dev+0x68/0xa0
bus_add_driver+0x19f/0x270
driver_register+0x5d/0xf0
do_one_initcall+0xac/0x200
do_init_module+0x1ec/0x280
__se_sys_finit_module+0x2de/0x310
do_syscall_64+0x6a/0x250
entry_SYSCALL_64_after_hwframe+0x4b/0x53
(cherry picked from commit 4623b958dd6da0f4c3026afdf330626a09ecb0f0) |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7921/mt7925: fix NULL dereference in CSA beacon
This patch is based on a BUG as reported by Bongani Hlope at
https://lore.kernel.org/all/20260502125824.425d7159@bongani-mini.home.org.za/
When a channel-switch announcement (CSA) beacon is received,
cfg80211 queues a wiphy work item that eventually calls
mt7921_channel_switch_rx_beacon(). If the station disconnects
(or the channel context is otherwise torn down) between the
time the work is queued and the time it runs, the driver's
dev->new_ctx pointer can already have been cleared to NULL.
mt7921_channel_switch_rx_beacon() then dereferences new_ctx
unconditionally, triggering a NULL pointer dereference at
address 0x0:
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:mt7921_channel_switch_rx_beacon+0x1f/0x100 [mt7921_common]
The same missing guard exists in mt7925_channel_switch_rx_beacon(),
which shares the same code pattern introduced by the same commit.
Add an early-return NULL check for dev->new_ctx in both
mt7921_channel_switch_rx_beacon() and
mt7925_channel_switch_rx_beacon(). When new_ctx is NULL there is
no pending channel switch to process, so returning immediately is
the correct and safe action.
Oops-Analysis: http://oops.fenrus.org/reports/lkml/20260502125824.425d7159@bongani-mini.home.org.za/report.html |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: x_tables: allocate hook ops while under mutex
arp/ip(6)t_register_table() add the table to the per-netns list via
xt_register_table() before allocating the per-netns hook ops copy
via kmemdup_array(). This leaves a window where the table is
visible in the list with ops=NULL.
If the pernet exit happens runs concurrently the pre_exit callback finds
the table via xt_find_table() and passes the NULL ops pointer to
nf_unregister_net_hooks(), causing a NULL dereference:
general protection fault in nf_unregister_net_hooks+0xbc/0x150
RIP: nf_unregister_net_hooks (net/netfilter/core.c:613)
Call Trace:
ipt_unregister_table_pre_exit
iptable_mangle_net_pre_exit
ops_pre_exit_list
cleanup_net
Fix by moving the ops allocation into the xtables core so the table is
never in the list without valid ops. Also ensure the table is no longer
processing packets before its torn down on error unwind.
nf_register_net_hooks might have published at least one hook; call
synchronize_rcu() if there was an error.
audit log register message gets deferred until all operations have
passed, this avoids need to emit another ureg message in case of
error unwinding.
Based on earlier patch by Tristan Madani. |
| In the Linux kernel, the following vulnerability has been resolved:
cachefiles: Fix error return when vfs_mkdir() fails
When vfs_mkdir() fails, the error code is not extracted from the
returned error pointer. This causes mkdir_error to be reached with
ret=0, which leads to returning ERR_PTR(0) (NULL) instead of a
proper error pointer.
Fix this by extracting the error code from the error pointer when
vfs_mkdir() fails. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: read COW data with the original inode during atomic write
When updating an atomic-write file, f2fs_write_begin() may read the
previously written data back from the COW inode:
prepare_atomic_write_begin() locates the block in the COW inode and sets
use_cow, and the read bio is then built with the COW inode:
f2fs_submit_page_read(use_cow ? F2FS_I(inode)->cow_inode : inode,
...);
and f2fs_grab_read_bio() decides whether to schedule fs-layer decryption
(STEP_DECRYPT) for the bio based on that inode via
fscrypt_inode_uses_fs_layer_crypto().
However, the folio being filled belongs to the original inode
(folio->mapping->host == inode), and the data stored in the COW block was
encrypted (or left as plaintext) using the original inode's context, not
the COW inode's -- see f2fs_encrypt_one_page(), which keys off
fio->page->mapping->host. fscrypt_decrypt_pagecache_blocks() likewise
operates on folio->mapping->host.
The COW inode is created as a tmpfile in the parent directory and inherits
its encryption policy from there. With test_dummy_encryption the newly
created COW inode gets the dummy policy and becomes encrypted, while a
pre-existing regular file -- created before the policy applied, e.g.
already present in the on-disk image -- stays unencrypted. The read
path then sets STEP_DECRYPT based on the encrypted COW inode and calls
fscrypt_decrypt_pagecache_blocks() on a folio whose host (the unencrypted
original inode) has a NULL ->i_crypt_info, dereferencing it:
Oops: general protection fault, probably for non-canonical address ...
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
RIP: 0010:fscrypt_decrypt_pagecache_blocks+0xa0/0x310
Workqueue: f2fs_post_read_wq f2fs_post_read_work
Call Trace:
fscrypt_decrypt_bio+0x1eb/0x340
f2fs_post_read_work+0xba/0x140
process_one_work+0x91c/0x1a40
worker_thread+0x677/0xe90
kthread+0x2bc/0x3a0
The COW inode is only needed to locate the on-disk block, and that block
address is already resolved into @blkaddr by prepare_atomic_write_begin()
via __find_data_block(cow_inode, ...); f2fs_submit_page_read() then reads
from that physical @blkaddr directly, so the inode argument only selects
the post-read crypto context, not which block is fetched. Reading with
@inode therefore returns the same (latest, not-yet-committed) COW data,
while making both the fs-layer decryption decision and the inline crypto
path use the correct (original inode's) key.
With the COW inode no longer used at the read site, the use_cow flag has no
remaining consumer; drop it from f2fs_write_begin() and
prepare_atomic_write_begin(). |
| In the Linux kernel, the following vulnerability has been resolved:
ice: fix potential NULL pointer deref in error path of ice_set_ringparam()
ice_set_ringparam nullifies tstamp_ring of temporary tx_rings, without
clearing ICE_TX_RING_FLAGS_TXTIME bit.
When ICE_TX_RING_FLAGS_TXTIME is set and the subsequent
ice_setup_tx_ring() call fails, a NULL pointer dereference could happen
in the unwinding sequence:
ice_clean_tx_ring()
-> ice_is_txtime_cfg() == true (ICE_TX_RING_FLAGS_TXTIME is set)
-> ice_free_tx_tstamp_ring()
-> ice_free_tstamp_ring()
-> tstamp_ring->desc (NULL deref)
Clear ICE_TX_RING_FLAGS_TXTIME bit to avoid the potential issue.
Note that this potential issue is found by manual code review.
Compile test only since unfortunately I don't have E830 devices. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix dc_link NULL handling in HPD init
amdgpu_dm_hpd_init() may see connectors without a valid dc_link.
The code already checks dc_link for the polling decision, but later
unconditionally dereferences it when setting up HPD interrupts.
Assign dc_link early and skip connectors where it is NULL.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_irq.c:940 amdgpu_dm_hpd_init()
error: we previously assumed 'dc_link' could be null (see line 931)
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_irq.c
923 /*
924 * Analog connectors may be hot-plugged unlike other connector
925 * types that don't support HPD. Only poll analog connectors.
926 */
927 use_polling |=
928 amdgpu_dm_connector->dc_link &&
^^^^^^^^^^^^^^^^^^^^^^^^^^^^ The patch adds this NULL check but hopefully it can be removed
929 dc_connector_supports_analog(amdgpu_dm_connector->dc_link->link_id.id);
930
931 dc_link = amdgpu_dm_connector->dc_link;
dc_link assigned here.
932
933 /*
934 * Get a base driver irq reference for hpd ints for the lifetime
935 * of dm. Note that only hpd interrupt types are registered with
936 * base driver; hpd_rx types aren't. IOW, amdgpu_irq_get/put on
937 * hpd_rx isn't available. DM currently controls hpd_rx
938 * explicitly with dc_interrupt_set()
939 */
--> 940 if (dc_link->irq_source_hpd != DC_IRQ_SOURCE_INVALID) {
^^^^^^^^^^^^^^^^^^^^^^^ If it's NULL then we are trouble because we dereference it here.
941 irq_type = dc_link->irq_source_hpd - DC_IRQ_SOURCE_HPD1;
942 /*
943 * TODO: There's a mismatch between mode_info.num_hpd
944 * and what bios reports as the # of connectors with hpd |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: amd: acp-mach-common: Add missing error check for clock acquisition
The acp_card_rt5682_init() and acp_card_rt5682s_init() functions did not
check the return values of clk_get(). This could lead to a kernel crash
when the invalid pointers are later dereferenced by clock core
functions.
Fix this by:
1. Changing clk_get() to the device-managed devm_clk_get().
2. Adding IS_ERR() checks immediately after each clock acquisition. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix crash when destroying a suspended hardware context
If userspace issues an ioctl to destroy a hardware context that has
already been automatically suspended, the driver may crash because the
mailbox channel pointer is NULL for the suspended context.
Fix this by checking the mailbox channel pointer in aie2_destroy_context()
before accessing it. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix NULL pointer dereference of mgmt_chann
mgmt_chann may be set to NULL if the firmware returns an unexpected
error in aie2_send_mgmt_msg_wait(). This can later lead to a NULL
pointer dereference in aie2_hw_stop().
Fix this by introducing a dedicated helper to destroy mgmt_chann
and by adding proper NULL checks before accessing it. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: endpoint: Add missing NULL check for alloc_workqueue()
alloc_workqueue() can return NULL on memory allocation failure. Without
proper error checking, this may lead to a NULL pointer dereference when
queue_work() is later called with the NULL workqueue pointer in
epf_ntb_epc_init().
Add a NULL check immediately after alloc_workqueue() and return -ENOMEM on
failure to prevent the driver from loading with an invalid workqueue
pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix potential NULL pointer dereference in context cleanup
aie_destroy_context() is invoked during error handling in
aie2_create_context(). However, aie_destroy_context() assumes that the
context's mailbox channel pointer is non-NULL. If mailbox channel
creation fails, the pointer remains NULL and calling aie_destroy_context()
can lead to a NULL pointer dereference.
In aie2_create_context(), replace aie_destroy_context() with a function
which request firmware to remove the context created previously. |
| A NULL pointer dereference vulnerability has been reported to affect QTS, QVP, QuTS cloud and QuTS hero. If a remote attacker gains an administrator account, they can then exploit the vulnerability to launch a denial-of-service (DoS) attack.
We have already fixed the vulnerability in the following version:
QTS 5.2.9.3410 build 20260214 and later
QVP 2.7.4 and later
QuTS cloud c5.2.9.3468 build 20260413 and later
QuTS hero h5.2.9.3410 build 20260214 and later
QuTS hero h5.3.4.3500 build 20260520 and later
QuTS hero h6.0.0.3459 build 20260409 and later |
| ImageMagick 7.1.1-31 before 7.1.2-32 contains a NULL pointer dereference in the PostScript decoder that is triggered when a policy limit is reached. Attackers can supply a crafted PostScript file for processing to crash the application, causing a denial of service. |
