Export limit exceeded: 412866 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (412866 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-90347 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: arm64: ptrace: Keep 'orig_x0' in-sync with x0 on syscall entry Commit e057b9477232 ("arm64: syscall: Ensure saved x0 is kept in-sync with tracer updates") attempted to resolve a long-standing issue with syscall entry tracing, where a tracer is able to manipulate the first syscall argument without being subjected to seccomp or audit checking. Unfortunately, that fix was incomplete [1], as it failed to update 'orig_x0' between a tracer updating x0 during a seccomp ptrace exit (SECCOMP_RET_TRACE) and the seccomp filter being re-evaluated. Rather than add hooks to the core seccomp code, instead move the synchronisation code into the ptrace GPR and syscall setting code so that 'orig_x0' is kept up to date with x0 whenever we're stopped on the syscall entry path. | ||||
| CVE-2026-90346 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: nl80211: clean up color-change beacon data on errors nl80211_color_change() calls nl80211_parse_beacon() for the beacon_next template, which can allocate params.beacon_next.mbssid_ies and .rnr_ies. A parsing failure returned directly instead of using the out: cleanup, leaking any allocations completed before the error. Allocate the nested attribute table before parsing beacon_next. Its allocation failure can then return before beacon data exists, while a later parsing failure uses out: to release the parsed data. | ||||
| CVE-2026-90345 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: fix P2P action frame handling without device vif Some P2P action frame paths assume the P2P device vif is always available. That is not true when userspace sends non-P2P public action frames through the primary interface, or when action-frame abort runs after the P2P device vif has not been created. Fall back to the primary vif when aborting an action frame without a P2P device vif, and guard P2P device saved IE access before using it for peer channel search. | ||||
| CVE-2026-90343 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: stop PMSR before P2P and NAN teardown PMSR request teardown must abort active measurements while the wireless_dev is still present in the driver. cfg80211_leave_locked() and cfg80211_stop_pd() already do this before invoking the driver's stop callback, but cfg80211_stop_p2p_device() and cfg80211_stop_nan() do not. Those helpers are also called directly by nl80211, rfkill shutdown, and wireless_dev unregister paths. If one of these paths stops a P2P device or NAN interface with a pending request, it removes the mac80211 subinterface from the driver first. Subsequent request cleanup cannot reach the lower driver's abort callback, but cfg80211 frees the request regardless. Driver state can then retain a stale request and use it when it later reports a result. Call cfg80211_pmsr_wdev_down() before stopping the P2P device or NAN interface. This keeps lower-driver request state and cfg80211 request ownership in sync for all of the helpers' callers. | ||||
| CVE-2026-90337 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: serial: core: do fallible allocations before the console can be registered serial_core_add_one_port() allocates uport->tty_groups after uart_configure_port(), which may register the console. If the allocation fails, the driver unwinds the port while its console remains registered. The earlier uport->name allocation has a related failure path that leaves state->uart_port linked to a port being freed. Failslab reproduced a NULL dereference in PL011 console output and a KASAN use-after-free in i.MX console output after failed binds. Allocate the name and tty_groups before linking the port and configuring it. Reserve space for the optional driver attribute group because config_port() may populate uport->attr_group during configuration. | ||||
| CVE-2026-90336 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: serial: core: clear freed pointers on uart_register_driver() failure uart_register_driver() leaves drv->state pointing to freed memory when tty_alloc_driver() fails. If tty_register_driver() fails, drv->tty_driver also retains a pointer after its reference is dropped. Drivers that use drv->state as an "already registered" flag can then skip registration on the next probe and pass the freed state to uart_add_one_port(). This issue was found with failslab on QEMU's raspi1ap board by failing registration and binding the PL011 port again. Clear both pointers on their failure paths, as uart_unregister_driver() already does. | ||||
| CVE-2026-90335 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tty: skip cdev_del() when no cdev is registered TTY device registration can fail before a cdev is allocated. Serial core keeps the port so setserial can still use it, and later removal passes the NULL cdev slot to cdev_del(), causing a NULL-pointer dereference. Only delete the cdev when the slot is not NULL. | ||||
| CVE-2026-90333 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dm-integrity: replace forgeable discard filler with a keyed sector marker The discard-block check in dm_integrity_rw_tag() treats a stored tag of all 0xf6 bytes (DISCARD_FILLER) as proof a block was discarded and skips HMAC verification. allow_discards is only accepted in dm-integrity's standalone mode. An attacker with raw write access to the backing device, but without the integrity key, can stamp any block with an all-0xf6 tag and have it served as authentic. Add a new "allow_discards_keyed" target argument that marks discarded blocks with a keyed checksum of (salt || sector) instead, computed by integrity_discard_checksum(). | ||||
| CVE-2026-90330 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: HID: logitech-hidpp: Fix FF device cleanup on init failure hidpp_ff_init() creates the input force-feedback device with input_ff_create(), then allocates the HID++ FF private data, effect ID array, and workqueue. If any of those allocations fail after input_ff_create() succeeds, the function returns an error without destroying the FF device. Add an unwind path that frees the private allocations made by hidpp_ff_init() and calls input_ff_destroy() for failures after input_ff_create() succeeds. | ||||
| CVE-2026-90328 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: HID: steam: Reject short reads Steam Controller FEATURE reports encode the size of the message in the message itself. Previously we were trusting that the size reported matched the size we actually read, leading to a potential issue with short reads. Instead, we should actually verify the length of the read. | ||||
| CVE-2026-90326 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: blk-cgroup: fix race between policy activation and blkg destruction When switching an IO scheduler on a block device, blkcg_activate_policy() allocates blkg_policy_data (pd) for all blkgs attached to the queue. However, blkcg_activate_policy() may race with concurrent blkcg deletion, leading to use-after-free and memory leak issues. The use-after-free occurs in the following race: T1 (blkcg_activate_policy): - Successfully allocates pd for blkg1 (loop0->queue, blkcgA) - Fails to allocate pd for blkg2 (loop0->queue, blkcgB) - Enters the enomem rollback path to release blkg1 resources T2 (blkcg deletion): - blkcgA is deleted concurrently - blkg1 is freed via blkg_free_workfn() - blkg1->pd is freed T1 (continued): - Rollback path accesses blkg1->pd->online after pd is freed - Triggers use-after-free In addition, blkg_free_workfn() frees pd before removing the blkg from q->blkg_list. This allows blkcg_activate_policy() to allocate a new pd for a blkg that is being destroyed, leaving the newly allocated pd unreachable when the blkg is finally freed. Fix these races by extending blkcg_mutex coverage to serialize blkcg_activate_policy() rollback and blkg destruction, ensuring pd lifecycle is synchronized with blkg list visibility. | ||||
| CVE-2026-90324 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ublk: check import_ubuf() return value import_ubuf() can fail if the address range (provided by the userspace ublk server) is outside the allowed user address space. Return that 0 bytes were copied if import_ubuf() fails rather than passing an uninitialized struct iov_iter to ublk_copy_user_pages(). | ||||
| CVE-2026-90322 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2/cluster: keep heartbeat local node stable o2nm_node_local_store() handles local=0 by stopping o2net and setting cl_local_node to O2NM_INVALID_NODE_NUM, but it leaves cl_has_local set. That stale state makes o2nm_this_node() return 255, blocks a later local=1 attempt with -EBUSY, and can feed 255 to heartbeat users that call o2nm_this_node() dynamically. Clearing cl_has_local is required when the local node is reset. But heartbeat threads can still be running at that point. They pin the local node config item at startup, yet o2hb_do_disk_heartbeat() and thread teardown re-read o2nm_this_node() for the local slot and for o2nm_undepend_this_node(). Once local=0 has cleared the live local-node state, those dynamic reads return O2NM_MAX_NODES, which is also the invalid node number 255. Store the local node number in the heartbeat region when the region starts. Use that stable node for heartbeat slot writes/checks, negotiation messages, and the final configfs undepend. Stop the heartbeat loop when the current local node no longer matches the stored node, and clear cl_has_local together with cl_local_node in the local=0 path so nodemanager state matches node removal. Validation reproduced this kernel report: KASAN slab-out-of-bounds in o2hb_do_disk_heartbeat+0x372/0xb30 RIP: 0010:memset+0xf/0x20 Read of size 8 Call trace: dump_stack_lvl+0x66/0xa0 print_report+0xd0/0x630 o2hb_do_disk_heartbeat+0x372/0xb30 (fs/ocfs2/cluster/heartbeat.c:1079) srso_alias_return_thunk+0x5/0xfbef5 __virt_addr_valid+0x188/0x2f0 kasan_report+0xe4/0x120 o2hb_do_disk_heartbeat+0x5/0xb30 (fs/ocfs2/cluster/heartbeat.c:1079) o2hb_thread+0x14e/0x770 kthread_affine_node+0x139/0x180 lockdep_hardirqs_on_prepare+0xda/0x190 trace_hardirqs_on+0x18/0x130 kthread+0x19d/0x1e0 ret_from_fork+0x37a/0x4d0 __switch_to+0x2d5/0x6f0 ret_from_fork_asm+0x1a/0x30 | ||||
| CVE-2026-90321 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate inline xattrs during inode block validation Patch series "ocfs2: validate xattr entry bounds", v7. This series validates OCFS2 xattr entry name/value bounds when xattr metadata is read and validated, before getxattr() or listxattr() can walk out-of-range entry arrays or offsets from corrupted metadata. This patch (of 2): ocfs2_validate_inode_block() verifies a dinode before OCFS2 users walk metadata from it, but inline xattr metadata is still checked only in operation-specific consumers. The existing ibody lookup helper validates inline header placement and entry count, but inode block validation does not reject entry name/value bounds. Add a flat xattr entry validator and call it from inode block validation for inline xattrs. Keep the operation paths on their existing header/count lookup checks; the full entry bounds check now runs when the inode block is validated at read time. Reject corrupted inline xattr metadata before ocfs2_xattr_ibody_get() or listxattr() can walk past the inline storage. Validation reproduced this kernel report: BUG: KASAN: use-after-free in ocfs2_xattr_find_entry+0x5a/0x170 Read of size 2 at addr ffff8881242a2000 by task python3/529 Call Trace: dump_stack_lvl+0x66/0xa0 print_report+0xce/0x630 kasan_report+0xe0/0x110 ocfs2_xattr_find_entry+0x5a/0x170 ocfs2_xattr_get_nolock+0x20a/0x820 ocfs2_xattr_get+0x10c/0x1e0 __vfs_getxattr+0xe2/0x130 vfs_getxattr+0x185/0x1b0 | ||||
| CVE-2026-90320 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate external xattr entries when reading metadata ocfs2_validate_xattr_block() checks the xattr block header before the block reaches higher-level xattr users, but it does not verify that a non-indexed block's xh_count and entry offsets fit inside the block. Indexed buckets likewise reach list/get consumers after ECC without an entry-bounds check. Use the flat xattr entry validator for non-indexed external xattr blocks, and use a bucket-specific validator for indexed buckets at metadata read time. The bucket validator keeps the entry array bounded by the first bucket block while checking name/value offsets against the bucket block they target. Reject corrupted external xattr metadata before listxattr() or getxattr() can walk out-of-range entry arrays or name/value offsets. Validation reproduced this kernel report: BUG: KASAN: use-after-free in ocfs2_xattr_list_entries+0xd7/0x190 Read of size 1 at addr ffff88810a654007 by task ocfs2_xattr_lis/630 Call Trace: dump_stack_lvl+0x66/0xa0 print_report+0xce/0x630 kasan_report+0xe0/0x110 ocfs2_xattr_list_entries+0xd7/0x190 ocfs2_listxattr+0x3f6/0x610 listxattr+0x90/0xe0 path_listxattrat+0xed/0x220 do_syscall_64+0x115/0x6a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f | ||||
| CVE-2026-90311 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: thermal: hwmon: Remove hwmon class device along with its parent The current code creates one hwmon device per thermal zone type and that device is registered under the first thermal zone of the given type. That turns out to be problematic when the thermal zone holding the hwmon device is removed. For example, say that there are two ACPI thermal zones on a system /sys/devices/virtual/thermal/thermal_zone0/ /sys/devices/virtual/thermal/thermal_zone1/ The current code registers a hwmon class device for thermal_zone0 only: /sys/devices/virtual/thermal/thermal_zone0/hwmon0/ because the type is "acpitz" for both of them, but it adds a sysfs attribute that belongs to thermal_zone1 under it: /sys/devices/virtual/thermal/thermal_zone0/hwmon0/temp2_input There is also /sys/devices/virtual/thermal/thermal_zone0/hwmon0/temp1_input which belongs to thermal_zone0. When thermal_zone0 is removed, say because the ACPI thermal driver is unbound from the underlying platform device, thermal_remove_hwmon_sysfs() skips the removal of hwmon0 because of the temp2_input attribute belonging to thermal_zone1 which effectively prevents thermal_zone0 removal from making progress. Address this by making thermal_remove_hwmon_sysfs() remove the entire hwmon class device interface for the given thermal zone type when the thermal zone device holding it is removed. To prevent races with thermal_add_hwmon_sysfs() that may interfere with this, carry out the entire addition and removal of hwmon sysfs interfaces for thermal zones under thermal_hwmon_list_lock. Also adjust the layout of the labels in thermal_add_hwmon_sysfs() to the current kernel coding style to align with the new "unlock" label. | ||||
| CVE-2026-90308 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/erdma: Hold QP references for AE and CM processing AE QP fatal events and iWARP CM paths load QPs from dev->qp_xa and then use or reference them outside the xarray lock. erdma_destroy_qp() can drop the destroy-path reference and free QP resources while such a lookup is in flight. Add erdma_qp_get_by_qpn() to acquire a kref under the xarray lock with kref_get_unless_zero(). Remove the QP from the xarray before dropping the destroy-path reference so no new lookup can acquire it while destruction waits for existing users. | ||||
| CVE-2026-90301 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: o2hb: quiesce negotiate handlers and timeout work Heartbeat regions publish struct o2hb_region as the private data for the NEGO_TIMEOUT and NEGO_APPROVE o2net handlers as soon as make_item() creates the configfs region. The approve handler can call o2hb_arm_timeout(), so a peer can touch the region timeout work before dev_store() has finished building the heartbeat runtime, or after teardown has started to shut that runtime back down. The final configfs put also has to keep reg alive until the last in-flight o2net callback drops its handler reference. o2net_unregister_handler_list() blocks future handler lookups, but it does not wait for sc_rx_work that already passed o2net_handler_get(). That drain needs to cover local listener teardown as well, where the o2net ordered workqueue may already be inside destroy_workqueue(). Fix the lifetime rule in both directions. Initialize the region delayed works before publishing reg through the o2net handler table, keep new or stopping regions non-armable with hr_stopping, and quiesce both delayed works on failed-start and teardown paths even when no heartbeat thread is left to call o2hb_disarm_timeout(). Then unregister handlers before tearing down handler-visible region state and make the drain wait for the active or destroying o2net ordered workqueue before release frees reg. The buggy scenario involves two paths, with each column showing the order within that path: region lifecycle: late negotiate callback: 1. make_item() registers the 1. o2net_process_message() gets a region handlers before heartbeat handler for reg. dev_store() has built a 2. The callback runs after the lookup runnable heartbeat context. lock is dropped and dereferences reg. 2. A failed start or rmdir 3. An approve or timeout path tries to stops the heartbeat thread, queue reg's delayed work, or release quiesces existing work, and races the callback body after handler drops the final configfs ref. unregister. 3. region_release() must drain 4. The callback or delayed work can handler-visible o2net rx work outlive reg unless lifecycle code before freeing reg. keeps the region non-armable and drains the active-or-destroying o2net workqueue. Validation reproduced this kernel report: KASAN slab-use-after-free in __run_timers+0x22c/0x5b0 Write of size 8 Call trace: dump_stack_lvl+0x66/0xa0 print_report+0xce/0x630 __run_timers+0x22c/0x5b0 kasan_report+0xe0/0x110 _raw_spin_unlock_irqrestore+0x27/0x60 try_to_wake_up+0x191/0xf70 timer_expire_remote+0xae/0xf0 run_timer_softirq+0x19b/0x1a0 handle_softirqs+0x156/0x660 __irq_exit_rcu+0xc4/0x160 irq_exit_rcu+0xe/0x20 sysvec_apic_timer_interrupt+0x6c/0x80 asm_sysvec_apic_timer_interrupt+0x1a/0x20 Allocated by task stack: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 o2hb_heartbeat_group_make_item+0x3c/0x600 | ||||
| CVE-2026-90300 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Clear buf on error in __bpf_get_task_stack Both bpf_get_task_stack and bpf_get_task_stack_sleepable helpers that use __bpf_get_task_stack have buf defined as ARG_PTR_TO_UNINIT_MEM argument and we should initialize the buf on every return path. Adding missing buf memset for __bpf_get_task_stack fail paths. This provides deterministic buffer contents, which is useful when the buffer is used directly as a map key. | ||||
| CVE-2026-90291 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: module/dups: Fix use-after-free in kmod_dup_req lifetime handling The kmod dups code uses RCU to ensure that a kmod_dup_req instance is freed only after it is no longer referenced. When releasing an instance, the kmod_dup_request_delete() function removes the kmod_dup_req from the dup_kmod_reqs list, waits via synchronize_rcu() and finally frees it. However, this doesn't work correctly because parallel users referencing the instance in kmod_dup_request_exists_wait() don't enter an RCU read-side critical section. This can result in a use-after-free. The kmod_dup_request_exists_wait() function may need to hold a valid reference to a kmod_dup_req instance across a blocking wait until the corresponding modprobe command completes. This makes it unsuitable for RCU. Fix the issue by changing the lifecycle management of kmod_dup_req to use reference counting. | ||||