Export limit exceeded: 412897 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 412897 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 412897 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 412897 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (412897 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98735 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Serialize ACL scheduling with channel deletion hci_chan_sent() selects a channel under RCU but drops the read lock before accessing chan->conn and returning the channel. The ACL and LE schedulers then use its packet queue and update its transmit counters without any protection against channel deletion. After TX selects a channel and releases RCU, a disconnect command timeout on the separate request workqueue can run hci_conn_failed() and l2cap_conn_del(). hci_chan_del() can then unlink the channel, complete synchronize_rcu(), purge its queue and free it before TX resumes. This causes use-after-free both in hci_chan_sent() and in its callers. KASAN reported: BUG: KASAN: slab-use-after-free in hci_chan_sent+0x892/0x9b0 Workqueue: hci0 hci_tx_work Call Trace: hci_chan_sent+0x892/0x9b0 hci_tx_work+0x5e6/0xb70 Allocated by task 91: hci_chan_create+0xe3/0x350 l2cap_conn_add.part.0+0x12/0xa30 l2cap_chan_connect+0x110d/0x1b60 l2cap_sock_connect+0x310/0x530 Freed by task 99: hci_chan_del+0x11f/0x170 l2cap_conn_del+0x4f1/0x800 l2cap_connect_cfm+0x88c/0xd30 hci_conn_failed+0x150/0x250 hci_abort_conn_sync+0x3e3/0x800 hci_cmd_sync_run+0x7e/0xc0 hci_abort_conn+0x105/0x1f0 disconnect_sync+0x157/0x290 hci_cmd_sync_work+0x13c/0x290 Hold the existing device mutex across channel selection and transmission in both schedulers to serialize them with channel teardown. Keep timeout handling outside the critical sections because hci_link_tx_to() acquires the same mutex. This also permits the transmit path to sleep, unlike extending the RCU read-side critical section across packet submission. | ||||
| CVE-2026-98734 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Serialize SCO and ISO scheduling with teardown hci_low_sent() selects a connection under RCU but drops the read lock before calculating its quota and returning it to the scheduler. The connection is then used without lifetime protection by hci_sched_iso() and hci_sched_sco(). After the TX worker drops the RCU read lock, hci_abort_conn_sync() on hdev->req_workqueue can remove the connection from the hash, complete synchronize_rcu(), purge its queues and release it. The TX worker on hdev->workqueue can then access the freed connection in hci_quote_sent() or while dequeuing packets and updating conn->sent. KASAN reported: BUG: KASAN: slab-use-after-free in hci_low_sent+0x730/0x840 Workqueue: hci0 hci_tx_work Call Trace: hci_low_sent+0x730/0x840 hci_sched_iso+0x25e/0x4d0 hci_tx_work+0x239/0xcb0 Allocated by task 93: __hci_conn_add+0x16f/0x1b40 hci_bind_bis+0x782/0x17b0 hci_connect_bis+0xa0/0x510 iso_sock_connect+0x589/0x1050 Freed by task 88: kfree+0x131/0x3c0 device_release+0xc8/0x240 kobject_put+0x14d/0x280 hci_conn_del+0x55a/0xe80 hci_disconnect_sync+0x156/0x180 hci_abort_conn_sync+0x3e7/0x940 hci_cmd_sync_work+0x13c/0x290 Hold hci_dev_lock() across connection selection and transmission in both SCO and ISO scheduling, serializing them with connection teardown. This also prevents queuing completion timestamps after the connection queues have been purged. Extending RCU across transmission would be unsafe because the transmit path can sleep. Keep the ISO timeout check outside the mutex since hci_link_tx_to() takes it itself. The preceding channel fix already holds this mutex in the ACL and LE schedulers, which call the SCO scheduler between packets. Move the SCO body to __hci_sched_sco(), assert that its caller holds the mutex, and use it directly from these locked paths. Keep a locking hci_sched_sco() wrapper for the direct calls from hci_tx_work(). This avoids recursively acquiring the device mutex while preserving the scheduling order. Remove the obsolete claim that connection removal disables TX. | ||||
| CVE-2026-98733 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Serialize fragmented ISO packet queueing The fragmented path in hci_queue_iso() calls __skb_queue_tail() without holding conn->data_q.lock. The socket lock serializes senders, but the transmit worker can concurrently remove packets from this queue using skb_dequeue(). After an insertion saves the old tail pointer, hci_sched_iso() can dequeue that packet and pass it to the driver. The driver can free the packet before the insertion resumes and writes to the old tail's next pointer, causing a use-after-free. Concurrent updates can also corrupt the queue. KASAN reported: BUG: KASAN: slab-use-after-free in hci_send_iso+0xc7d/0xe10 Call Trace: hci_send_iso+0xc7d/0xe10 iso_sock_sendmsg+0x710/0x900 __sys_sendto+0x34a/0x3a0 Allocated by task 86: __alloc_skb+0xdd/0x820 alloc_skb_with_frags+0x7e/0x770 sock_alloc_send_pskb+0x67a/0x820 bt_skb_sendmsg.constprop.0+0xc0/0x6c0 iso_sock_sendmsg+0x44e/0x900 Freed by task 90: kmem_cache_free+0xcb/0x3d0 vhci_read+0x33f/0x4d0 vfs_read+0x177/0xa20 Hold the queue lock across the entire fragment batch, as hci_queue_acl() does, to serialize insertion against dequeue while preserving fragment ordering. | ||||
| CVE-2026-98732 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel: fix buffer over-read in btintel_hw_error() The "Exception info %s" print uses skb->data + 1, but the 12-byte payload is not guaranteed to be NUL-terminated and can be read past its end. Bound the print with "%.*s" and skb->len - 1. | ||||
| CVE-2026-98726 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nvme-multipath: fix underflow in ANA log bounds checks The number of ANA groups advertised through Identify Controller sizes the ANA log buffer. The ANA log header and group descriptors independently supply the number of groups and namespace IDs to parse. Both bounds checks subtract an untrusted object size from ana_log_size before comparing the current offset. If the object is larger than the buffer, the size_t subtraction underflows and lets the parser read beyond ana_log_buf. Check the current offset before the first subtraction and compare each object size with the remaining buffer instead. This rejects inconsistent ANA data before dereferencing a truncated group descriptor or walking an oversized namespace ID array. | ||||
| CVE-2026-98725 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nvmet-auth: fix out-of-bounds write in nvmet_auth_challenge() nvmet_auth_challenge() receives its output buffer as a void pointer. sizeof(*d) therefore evaluates to one with GCC and undercounts the fixed challenge header by 15 bytes. A short AUTH_RECEIVE buffer can pass the check before the challenge is copied past the end of its allocation. Use the typed challenge pointer when calculating the response size. BUG: KASAN: slab-out-of-bounds in nvmet_execute_auth_receive (drivers/nvme/target/fabrics-cmd-auth.c:442 drivers/nvme/target/fabrics-cmd-auth.c:569) Write of size 32 by task kworker/1:1H/64 Workqueue: nvmet_tcp_wq nvmet_tcp_io_work Call Trace: nvmet_execute_auth_receive (drivers/nvme/target/fabrics-cmd-auth.c:442 drivers/nvme/target/fabrics-cmd-auth.c:569) nvmet_tcp_try_recv_pdu (drivers/nvme/target/tcp.c:1119 drivers/nvme/target/tcp.c:1243) nvmet_tcp_io_work (drivers/nvme/target/tcp.c:1350 drivers/nvme/target/tcp.c:1382 drivers/nvme/target/tcp.c:1445) process_one_work (kernel/workqueue.c:3322) worker_thread (kernel/workqueue.c:3405 kernel/workqueue.c:3486) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) The buggy address is located 16 bytes inside of allocated 33-byte region [ffff888000554e80, ffff888000554ea1) Kernel panic - not syncing: KASAN: panic_on_warn set ... | ||||
| CVE-2026-98722 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mtd: block2mtd: Fix divide error when erase_size is zero The erase size is parsed from the "block2mtd" module parameter and can be set to zero. add_device() then evaluates if (size % erase_size) with a zero divisor, which triggers a divide error: divide error: 0000 [#1] PREEMPT SMP PTI RIP: 0010:add_device drivers/mtd/devices/block2mtd.c:296 [inline] RIP: 0010:block2mtd_setup2+0x592/0xda0 drivers/mtd/devices/block2mtd.c:459 Call Trace: block2mtd_setup+0x27/0xe0 drivers/mtd/devices/block2mtd.c:476 param_attr_store+0x214/0x310 kernel/params.c:589 module_attr_store+0x65/0x90 kernel/params.c:904 kernfs_fop_write_iter+0x3a4/0x540 fs/kernfs/file.c:345 ... Reject a zero erase size before performing the modulo operation so the existing "erasesize must be a divisor of device size" error path reports the invalid argument and frees the device. | ||||
| CVE-2026-98721 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mtd: rawnand: cadence: Initialize IRQ state before requesting IRQ The Cadence NAND interrupt handler uses both the IRQ lock and completion object. Registering the IRQ before initializing them leaves a window in which a pending interrupt can access uninitialized synchronization state. Initialize them before registering the handler. | ||||
| CVE-2026-98717 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: Bail from shadow walks if the root is invalid or a dummy When walking shadow page tables, immediately terminate the walk if the root is a "dummy" root, i.e. a root whose top-level page table is backed by the zero page, but otherwise doesn't exist. If memslot creation races with a stage-2 page fault (EPT violation or #NPF) from L2, then if the stars align, KVM will attempt to walk shadow page tables using the zero page and hit a NULL pointer deref. BUG: kernel NULL pointer dereference, address: 0000000000000021 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP CPU: 30 UID: 1000 PID: 941 Comm: qemu Not tainted 7.2.0-rc2-1b731e5ded48-next-vm #1741 PREEMPTLAZY Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:__kvm_mmu_invalidate_addr+0xea/0x210 [kvm] Call Trace: <TASK> kvm_mmu_invalidate_addr+0x92/0xe0 [kvm] __kvm_inject_emulated_page_fault+0x67/0x80 [kvm] ept_page_fault+0x160/0x850 [kvm] kvm_mmu_do_page_fault+0x102/0x1f0 [kvm] kvm_mmu_page_fault+0x8e/0x6b0 [kvm] vmx_handle_exit+0x163/0x640 [kvm_intel] kvm_arch_vcpu_ioctl_run+0x960/0x2120 [kvm] kvm_vcpu_ioctl+0x2c7/0x970 [kvm] __x64_sys_ioctl+0x90/0xd0 do_syscall_64+0x67/0x5f0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f606d0b53bb Opportunistically harden the shadow walks against fully invalid roots, but WARN, as all callers are expected/required to pre-check for a valid root. Don't WARN in the dummy root case as the whole point of using a dummy root is to provide a root that's valid enough to enter the guest, i.e. it should Just Work for all flows except those that *need* to know about dummy roots. Alternatively, KVM could allocate a dedicated page and associated shadow page structure for the dummy root, which is very tempting as it such an approach should be more resilient against unexpected behavior. But that would be a much larger and thus riskier change than simply terminating walks of dummy roots. | ||||
| CVE-2026-98716 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Use the active VMCB's MSR bitmap when checking if MSR is intercepted Use the MSR permission bitmap of the active VMCB instead of assuming that KVM is always using vmcb02's bitmap when L2 is active, as KVM uses msrpm02 if and only if L1 wants to intercept MSR accesses, i.e. if and only if KVM needs to merge msprm01 with msrpm12. Don't bother tracking the virtual address of the bitmap that's being used, as __va() is cheap on x86, and caching the virtual address would introduce yet another source of potentially stale information. | ||||
| CVE-2026-98711 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.6 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cw1200: fix TX padding OOB read leaking heap data to device The TX path rounds the transfer size up to the bus alignment (align_size(), up to 511 bytes for SDIO, 1 byte for SPI) but sends the padded length straight from the frame buffer, which has no room reserved for the padding. cw1200_data_write() therefore reads past the end of the frame and the bus transfer carries those bytes to the device. A bogus device can collect up to 511 bytes of kernel heap data per TX frame. The RX path does not have this problem: it allocates the skb with the aligned length (alloc_len) before reading. Compute the exact padding with the bus align_size() callback, make sure queued TX frames have tailroom for it, and zero the padding bytes before the transfer so nothing past the frame is exposed. This is not expected to change driver behavior on most cases: frame contents and transfer sizes are unchanged, only the content of the padding bytes (previously undefined stale memory, now zero), which the device never reads since the WSM header carries the real frame length. The skb expansion can only fail under memory exhaustion, in which case the frame is dropped like on the existing error paths of cw1200_tx(). Discovered by Atuin - Automated Vulnerability Discovery Engine. | ||||
| CVE-2026-98710 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlegacy: 3945: free EEPROM data on remove il3945_pci_probe() calls il_eeprom_init(), which allocates memory for the EEPROM data. The probe failure paths release this allocation with il_eeprom_free(), but the remove path does not free it after a successful probe. As a result, the EEPROM data is leaked when the PCI device is removed. Free the EEPROM data in il3945_pci_remove() before releasing the mac80211 hardware structure. This issue was found by manual code inspection. | ||||
| CVE-2026-98709 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: count only matching reservations in reserved switch ieee80211_vif_use_reserved_switch() validates a replacement by counting assigned links on ctx->replace_ctx and treating reservations too broadly. A link can still be assigned to the old channel context while holding a reservation that belongs to a different replacement operation. That can make the current replacement appear complete too early. If another link finalizes first, the function can free the WILL_BE_REPLACED chanctx while the unmatched link and driver still use it, leading to a use-after-free in later beacon generation. Require an in-place reservation to point at the current replacement context, and require the reserved and assigned contexts to be the matching replacement pair, before counting or moving the link. | ||||
| CVE-2026-98708 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: keep paired old chanctx alive An in-place replacement keeps reciprocal replace_ctx pointers between the old WILL_BE_REPLACED chanctx and the new REPLACES_OTHER chanctx. However, the early free paths only consider assigned and reserved link users when deciding whether to free the old chanctx. That lets the old chanctx be freed too early while the replacement partner still points back to it, either when the last assigned link is released or when that link successfully reassigns to another existing context. Later unreserve and switch-finalization paths can then follow a stale replace_ctx pointer. Keep a paired old chanctx alive until the replacement pair has been torn down. Apply the same check to both __ieee80211_link_release_channel() and ieee80211_link_use_reserved_reassign(). If the replacement is later abandoned, ieee80211_link_unreserve_chanctx() already tears down the pairing before freeing the old chanctx once no users remain. | ||||
| CVE-2026-98707 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: shut down RX BA session timer on teardown Tearing down an RX BA session can leave the session timer queued on a freed tid_rx. Later timer-wheel processing and the timer callback itself then run against freed memory. An RX BAR handler can dereference tid_rx under RCU before teardown unpublishes it and stay in its read-side critical section while teardown deletes the session timer. The stale handler can then rearm the timer after timer_delete_sync() returns and before the RCU callback frees tid_rx. Use timer_shutdown_sync() so rearm attempts become ineffective once teardown starts. Keep reorder_timer unchanged: teardown marks the session removed under reorder_lock and its release path checks that state before rearming. session_timer has no equivalent guard because ieee80211_rx_h_ctrl() rearms it before taking reorder_lock. | ||||
| CVE-2026-98706 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: drain PS delivery work during station teardown Removing an AP or mesh station can notify the driver and wake TXQs after the station has already been removed from the driver, and can update num_sta_ps and the power-save queues after station cleanup has purged them. sta_deliver_ps_frames() tests sta->dead only before it starts delivery. A worker that passes that test can be delayed while teardown sets sta->dead and removes the station from the driver; when it resumes it still runs the full delivery. The existing cancel_work_sync() sits near the end of __cleanup_single_sta(), after the final driver state transition and after PS accounting and queue purging, so it drains the worker only once the state it has to protect has already changed. Before commit d34ba2168a3c ("mac80211: don't delay station destruction") cleanup was deferred through the same ordered workqueue as the delivery work, which kept the two ordered. Cancel the work after setting sta->dead and before moving the driver state, and move the existing cancellation to the start of __cleanup_single_sta(). The first drain closes the driver-lifetime window; driver callbacks during the remaining state transitions can still queue drv_deliver_wk through ieee80211_sta_block_awake(), so retain the second drain at the start of __cleanup_single_sta(). That drain also covers insertion failures, which reach cleanup without setting sta->dead. | ||||
| CVE-2026-98705 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: account proxy paths against the mesh path limit Proxy-path churn can drive the interface path counter negative and let later mesh path additions exceed MESH_MAX_MPATHS. mesh_path_free_rcu() decrements the interface mpaths counter for entries from both the mesh and proxy path tables, but mpp_path_add() never reserves a slot in that counter. Removing or expiring a proxy path therefore returns a slot that was never charged. mesh_path_add() uses the same counter to enforce MESH_MAX_MPATHS, so once it falls below the number of installed paths the limit no longer holds. Reserve the shared quota before allocating a proxy path and release it on every unsuccessful addition. Mesh and proxy paths now share one 1024-entry budget, so mpp_path_add() can return -ENOSPC at that limit. | ||||
| CVE-2026-98704 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: keep fallback association elements alive Associating to a non-transmitted MBSSID profile reads freed memory while determining the operating channel and applying HT capabilities. When an association response omits WMM, HT, or VHT information, ieee80211_assoc_config_link() parses the cached BSS IEs and copies the missing element pointers out of that fallback parse. For a non-transmitted MBSSID profile those pointers refer to merged-profile storage owned by the parse object, and the fallback block frees that object at its end. The copied pointers are used afterwards to determine the operating channel, configure bandwidth, and apply HT capabilities. Keep the fallback parse result alive until association setup finishes. [reorder variable declaration] | ||||
| CVE-2026-98703 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: minstrel_ht: validate fixed rate index The fixed_rate_idx debugfs file is a plain u32 attribute, so any value can be written to it. minstrel_ht_update_stats() then copies the value into mi->max_tp_rate[] and mi->max_prob_rate, and minstrel_ht_set_rate() uses MI_RATE_GROUP()/MI_RATE_IDX() to index minstrel_mcs_groups[] (42 entries) and mi->groups[].rates[] (10 entries) with it. Writing e.g. 65535 selects group 4095 and rate index 15, far outside both arrays. The out-of-bounds entries are dereferenced and updated as struct minstrel_rate_stats (retry counts, etc.), so the invalid index corrupts adjacent kernel memory. With CONFIG_UBSAN_BOUNDS the access is reported as an array-index-out-of-bounds in minstrel_ht_set_rate(). Only a valid group/rate pair, or U32_MAX to disable fixed rate processing, can be used safely, so reject any other value when the debugfs file is written. The file is only reachable through a root-only debugfs mount, so this is not a privilege boundary. The out-of-bounds access is still a bug that must not be reachable through a writable debugfs attribute. | ||||
| CVE-2026-98701 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: release mesh path quota on failed additions Repeated failed or duplicate mesh path additions can exhaust MESH_MAX_MPATHS while the path table holds fewer paths, which stops new paths to reachable destinations from being created. mesh_path_add() reserves a slot before allocating and inserting a path. If allocation fails, the function returns without releasing the slot. If the rhashtable insertion reports an error or an existing destination, the function discards its candidate but retains the reservation. No new path is installed in any of these cases. Release the reservation whenever the candidate is not installed. | ||||