| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Add null check for head_pipe in dcn32_acquire_idle_pipe_for_head_pipe_in_layer
This commit addresses a potential null pointer dereference issue in the
`dcn32_acquire_idle_pipe_for_head_pipe_in_layer` function. The issue
could occur when `head_pipe` is null.
The fix adds a check to ensure `head_pipe` is not null before asserting
it. If `head_pipe` is null, the function returns NULL to prevent a
potential null pointer dereference.
Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn32/dcn32_resource.c:2690 dcn32_acquire_idle_pipe_for_head_pipe_in_layer() error: we previously assumed 'head_pipe' could be null (see line 2681) |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix a sdiv overflow issue
Zac Ecob reported a problem where a bpf program may cause kernel crash due
to the following error:
Oops: divide error: 0000 [#1] PREEMPT SMP KASAN PTI
The failure is due to the below signed divide:
LLONG_MIN/-1 where LLONG_MIN equals to -9,223,372,036,854,775,808.
LLONG_MIN/-1 is supposed to give a positive number 9,223,372,036,854,775,808,
but it is impossible since for 64-bit system, the maximum positive
number is 9,223,372,036,854,775,807. On x86_64, LLONG_MIN/-1 will
cause a kernel exception. On arm64, the result for LLONG_MIN/-1 is
LLONG_MIN.
Further investigation found all the following sdiv/smod cases may trigger
an exception when bpf program is running on x86_64 platform:
- LLONG_MIN/-1 for 64bit operation
- INT_MIN/-1 for 32bit operation
- LLONG_MIN%-1 for 64bit operation
- INT_MIN%-1 for 32bit operation
where -1 can be an immediate or in a register.
On arm64, there are no exceptions:
- LLONG_MIN/-1 = LLONG_MIN
- INT_MIN/-1 = INT_MIN
- LLONG_MIN%-1 = 0
- INT_MIN%-1 = 0
where -1 can be an immediate or in a register.
Insn patching is needed to handle the above cases and the patched codes
produced results aligned with above arm64 result. The below are pseudo
codes to handle sdiv/smod exceptions including both divisor -1 and divisor 0
and the divisor is stored in a register.
sdiv:
tmp = rX
tmp += 1 /* [-1, 0] -> [0, 1]
if tmp >(unsigned) 1 goto L2
if tmp == 0 goto L1
rY = 0
L1:
rY = -rY;
goto L3
L2:
rY /= rX
L3:
smod:
tmp = rX
tmp += 1 /* [-1, 0] -> [0, 1]
if tmp >(unsigned) 1 goto L1
if tmp == 1 (is64 ? goto L2 : goto L3)
rY = 0;
goto L2
L1:
rY %= rX
L2:
goto L4 // only when !is64
L3:
wY = wY // only when !is64
L4:
[1] https://lore.kernel.org/bpf/tPJLTEh7S_DxFEqAI2Ji5MBSoZVg7_G-Py2iaZpAaWtM961fFTWtsnlzwvTbzBzaUzwQAoNATXKUlt0LZOFgnDcIyKCswAnAGdUF3LBrhGQ=@protonmail.com/ |
| In the Linux kernel, the following vulnerability has been resolved:
mm, slub: avoid zeroing kmalloc redzone
Since commit 946fa0dbf2d8 ("mm/slub: extend redzone check to extra
allocated kmalloc space than requested"), setting orig_size treats
the wasted space (object_size - orig_size) as a redzone. However with
init_on_free=1 we clear the full object->size, including the redzone.
Additionally we clear the object metadata, including the stored orig_size,
making it zero, which makes check_object() treat the whole object as a
redzone.
These issues lead to the following BUG report with "slub_debug=FUZ
init_on_free=1":
[ 0.000000] =============================================================================
[ 0.000000] BUG kmalloc-8 (Not tainted): kmalloc Redzone overwritten
[ 0.000000] -----------------------------------------------------------------------------
[ 0.000000]
[ 0.000000] 0xffff000010032858-0xffff00001003285f @offset=2136. First byte 0x0 instead of 0xcc
[ 0.000000] FIX kmalloc-8: Restoring kmalloc Redzone 0xffff000010032858-0xffff00001003285f=0xcc
[ 0.000000] Slab 0xfffffdffc0400c80 objects=36 used=23 fp=0xffff000010032a18 flags=0x3fffe0000000200(workingset|node=0|zone=0|lastcpupid=0x1ffff)
[ 0.000000] Object 0xffff000010032858 @offset=2136 fp=0xffff0000100328c8
[ 0.000000]
[ 0.000000] Redzone ffff000010032850: cc cc cc cc cc cc cc cc ........
[ 0.000000] Object ffff000010032858: cc cc cc cc cc cc cc cc ........
[ 0.000000] Redzone ffff000010032860: cc cc cc cc cc cc cc cc ........
[ 0.000000] Padding ffff0000100328b4: 00 00 00 00 00 00 00 00 00 00 00 00 ............
[ 0.000000] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.11.0-rc3-next-20240814-00004-g61844c55c3f4 #144
[ 0.000000] Hardware name: NXP i.MX95 19X19 board (DT)
[ 0.000000] Call trace:
[ 0.000000] dump_backtrace+0x90/0xe8
[ 0.000000] show_stack+0x18/0x24
[ 0.000000] dump_stack_lvl+0x74/0x8c
[ 0.000000] dump_stack+0x18/0x24
[ 0.000000] print_trailer+0x150/0x218
[ 0.000000] check_object+0xe4/0x454
[ 0.000000] free_to_partial_list+0x2f8/0x5ec
To address the issue, use orig_size to clear the used area. And restore
the value of orig_size after clear the remaining area.
When CONFIG_SLUB_DEBUG not defined, (get_orig_size()' directly returns
s->object_size. So when using memset to init the area, the size can simply
be orig_size, as orig_size returns object_size when CONFIG_SLUB_DEBUG not
enabled. And orig_size can never be bigger than object_size. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Avoid overflow from uint32_t to uint8_t
[WHAT & HOW]
dmub_rb_cmd's ramping_boundary has size of uint8_t and it is assigned
0xFFFF. Fix it by changing it to uint8_t with value of 0xFF.
This fixes 2 INTEGER_OVERFLOW issues reported by Coverity. |
| The MySQL client response parser in Apache bRPC dereferences a null pointer when the server peer sends a zero-payload-length response packet. A response packet whose declared payload length is zero is accepted by the frame-length check (is_full_package), after which the parser reads the response type byte via an unbounded 5-byte fetch that returns nullptr, and type = p[4] dereferences it, crashing the client process.
Root Cause: In brpc::policy::MysqlReply::ConsumePartialIOBuf, buf.fetch(header, 5) returns nullptr when the buffered data only holds the 4-byte header of a zero-length packet, then the code reads p[4] (and, in the fast-auth path, p2[4]) without checking for a null or zero-length packet.
Affected Scenarios: A brpc MySQL client connecting to a malicious or compromised MySQL server (or a MITM) can be crashed by a zero-length server response packet, resulting in denial of service of the client.
Fix: The fix rejects zero-length response packets (returning PARSE_ERROR_ABSOLUTELY_WRONG) both for the initial response type determination and after a fast-auth marker, before reading the type byte. Upgrade to the Apache bRPC version 1.18.0 or apply the PR patch at https://github.com/apache/brpc/pull/3536. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: lpfc: Handle mailbox timeouts in lpfc_get_sfp_info
The MBX_TIMEOUT return code is not handled in lpfc_get_sfp_info and the
routine unconditionally frees submitted mailbox commands regardless of
return status. The issue is that for MBX_TIMEOUT cases, when firmware
returns SFP information at a later time, that same mailbox memory region
references previously freed memory in its cmpl routine.
Fix by adding checks for the MBX_TIMEOUT return code. During mailbox
resource cleanup, check the mbox flag to make sure that the wait did not
timeout. If the MBOX_WAKE flag is not set, then do not free the resources
because it will be freed when firmware completes the mailbox at a later
time in its cmpl routine.
Also, increase the timeout from 30 to 60 seconds to accommodate boot
scripts requiring longer timeouts. |
| In the Linux kernel, the following vulnerability has been resolved:
ethtool: fail closed if we can't get max channel used in indirection tables
Commit 0d1b7d6c9274 ("bnxt: fix crashes when reducing ring count with
active RSS contexts") proves that allowing indirection table to contain
channels with out of bounds IDs may lead to crashes. Currently the
max channel check in the core gets skipped if driver can't fetch
the indirection table or when we can't allocate memory.
Both of those conditions should be extremely rare but if they do
happen we should try to be safe and fail the channel change. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Add missing NULL pointer check within dpcd_extend_address_range
[Why & How]
ASSERT if return NULL from kcalloc. |
| In the Linux kernel, the following vulnerability has been resolved:
pktgen: use cpus_read_lock() in pg_net_init()
I have seen the WARN_ON(smp_processor_id() != cpu) firing
in pktgen_thread_worker() during tests.
We must use cpus_read_lock()/cpus_read_unlock()
around the for_each_online_cpu(cpu) loop.
While we are at it use WARN_ON_ONCE() to avoid a possible syslog flood. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: sc16is7xx: fix TX fifo corruption
Sometimes, when a packet is received on channel A at almost the same time
as a packet is about to be transmitted on channel B, we observe with a
logic analyzer that the received packet on channel A is transmitted on
channel B. In other words, the Tx buffer data on channel B is corrupted
with data from channel A.
The problem appeared since commit 4409df5866b7 ("serial: sc16is7xx: change
EFR lock to operate on each channels"), which changed the EFR locking to
operate on each channel instead of chip-wise.
This commit has introduced a regression, because the EFR lock is used not
only to protect the EFR registers access, but also, in a very obscure and
undocumented way, to protect access to the data buffer, which is shared by
the Tx and Rx handlers, but also by each channel of the IC.
Fix this regression first by switching to kfifo_out_linear_ptr() in
sc16is7xx_handle_tx() to eliminate the need for a shared Rx/Tx buffer.
Secondly, replace the chip-wise Rx buffer with a separate Rx buffer for
each channel. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: endpoint: pci-epf-test: Make use of cached 'epc_features' in pci_epf_test_core_init()
Instead of getting the epc_features from pci_epc_get_features() API, use
the cached pci_epf_test::epc_features value to avoid the NULL check. Since
the NULL check is already performed in pci_epf_test_bind(), having one more
check in pci_epf_test_core_init() is redundant and it is not possible to
hit the NULL pointer dereference.
Also with commit a01e7214bef9 ("PCI: endpoint: Remove "core_init_notifier"
flag"), 'epc_features' got dereferenced without the NULL check, leading to
the following false positive Smatch warning:
drivers/pci/endpoint/functions/pci-epf-test.c:784 pci_epf_test_core_init() error: we previously assumed 'epc_features' could be null (see line 747)
Thus, remove the redundant NULL check and also use the epc_features::
{msix_capable/msi_capable} flags directly to avoid local variables.
[kwilczynski: commit log] |
| In the Linux kernel, the following vulnerability has been resolved:
kvm: s390: Reject memory region operations for ucontrol VMs
This change rejects the KVM_SET_USER_MEMORY_REGION and
KVM_SET_USER_MEMORY_REGION2 ioctls when called on a ucontrol VM.
This is necessary since ucontrol VMs have kvm->arch.gmap set to 0 and
would thus result in a null pointer dereference further in.
Memory management needs to be performed in userspace and using the
ioctls KVM_S390_UCAS_MAP and KVM_S390_UCAS_UNMAP.
Also improve s390 specific documentation for KVM_SET_USER_MEMORY_REGION
and KVM_SET_USER_MEMORY_REGION2.
[frankja@linux.ibm.com: commit message spelling fix, subject prefix fix] |
| In the Linux kernel, the following vulnerability has been resolved:
mm/huge_memory: avoid PMD-size page cache if needed
xarray can't support arbitrary page cache size. the largest and supported
page cache size is defined as MAX_PAGECACHE_ORDER by commit 099d90642a71
("mm/filemap: make MAX_PAGECACHE_ORDER acceptable to xarray"). However,
it's possible to have 512MB page cache in the huge memory's collapsing
path on ARM64 system whose base page size is 64KB. 512MB page cache is
breaking the limitation and a warning is raised when the xarray entry is
split as shown in the following example.
[root@dhcp-10-26-1-207 ~]# cat /proc/1/smaps | grep KernelPageSize
KernelPageSize: 64 kB
[root@dhcp-10-26-1-207 ~]# cat /tmp/test.c
:
int main(int argc, char **argv)
{
const char *filename = TEST_XFS_FILENAME;
int fd = 0;
void *buf = (void *)-1, *p;
int pgsize = getpagesize();
int ret = 0;
if (pgsize != 0x10000) {
fprintf(stdout, "System with 64KB base page size is required!\n");
return -EPERM;
}
system("echo 0 > /sys/devices/virtual/bdi/253:0/read_ahead_kb");
system("echo 1 > /proc/sys/vm/drop_caches");
/* Open the xfs file */
fd = open(filename, O_RDONLY);
assert(fd > 0);
/* Create VMA */
buf = mmap(NULL, TEST_MEM_SIZE, PROT_READ, MAP_SHARED, fd, 0);
assert(buf != (void *)-1);
fprintf(stdout, "mapped buffer at 0x%p\n", buf);
/* Populate VMA */
ret = madvise(buf, TEST_MEM_SIZE, MADV_NOHUGEPAGE);
assert(ret == 0);
ret = madvise(buf, TEST_MEM_SIZE, MADV_POPULATE_READ);
assert(ret == 0);
/* Collapse VMA */
ret = madvise(buf, TEST_MEM_SIZE, MADV_HUGEPAGE);
assert(ret == 0);
ret = madvise(buf, TEST_MEM_SIZE, MADV_COLLAPSE);
if (ret) {
fprintf(stdout, "Error %d to madvise(MADV_COLLAPSE)\n", errno);
goto out;
}
/* Split xarray entry. Write permission is needed */
munmap(buf, TEST_MEM_SIZE);
buf = (void *)-1;
close(fd);
fd = open(filename, O_RDWR);
assert(fd > 0);
fallocate(fd, FALLOC_FL_KEEP_SIZE | FALLOC_FL_PUNCH_HOLE,
TEST_MEM_SIZE - pgsize, pgsize);
out:
if (buf != (void *)-1)
munmap(buf, TEST_MEM_SIZE);
if (fd > 0)
close(fd);
return ret;
}
[root@dhcp-10-26-1-207 ~]# gcc /tmp/test.c -o /tmp/test
[root@dhcp-10-26-1-207 ~]# /tmp/test
------------[ cut here ]------------
WARNING: CPU: 25 PID: 7560 at lib/xarray.c:1025 xas_split_alloc+0xf8/0x128
Modules linked in: nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib \
nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct \
nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 \
ip_set rfkill nf_tables nfnetlink vfat fat virtio_balloon drm fuse \
xfs libcrc32c crct10dif_ce ghash_ce sha2_ce sha256_arm64 virtio_net \
sha1_ce net_failover virtio_blk virtio_console failover dimlib virtio_mmio
CPU: 25 PID: 7560 Comm: test Kdump: loaded Not tainted 6.10.0-rc7-gavin+ #9
Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20240524-1.el9 05/24/2024
pstate: 83400005 (Nzcv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--)
pc : xas_split_alloc+0xf8/0x128
lr : split_huge_page_to_list_to_order+0x1c4/0x780
sp : ffff8000ac32f660
x29: ffff8000ac32f660 x28: ffff0000e0969eb0 x27: ffff8000ac32f6c0
x26: 0000000000000c40 x25: ffff0000e0969eb0 x24: 000000000000000d
x23: ffff8000ac32f6c0 x22: ffffffdfc0700000 x21: 0000000000000000
x20: 0000000000000000 x19: ffffffdfc0700000 x18: 0000000000000000
x17: 0000000000000000 x16: ffffd5f3708ffc70 x15: 0000000000000000
x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
x11: ffffffffffffffc0 x10: 0000000000000040 x9 : ffffd5f3708e692c
x8 : 0000000000000003 x7 : 0000000000000000 x6 : ffff0000e0969eb8
x5 : ffffd5f37289e378 x4 : 0000000000000000 x3 : 0000000000000c40
x2 : 000000000000000d x1 : 000000000000000c x0 : 0000000000000000
Call trace:
xas_split_alloc+0xf8/0x128
split_huge_page_to_list_to_order+0x1c4/0x780
truncate_inode_partial_folio+0xdc/0x160
truncate_inode_pages_range+0x1b4/0x4a8
truncate_pagecache_range+0x84/0xa
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
gve: Account for stopped queues when reading NIC stats
We now account for the fact that the NIC might send us stats for a
subset of queues. Without this change, gve_get_ethtool_stats might make
an invalid access on the priv->stats_report->stats array. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/pkey: Wipe copies of protected- and secure-keys
Although the clear-key of neither protected- nor secure-keys is
accessible, this key material should only be visible to the calling
process. So wipe all copies of protected- or secure-keys from stack,
even in case of an error. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: Fix improper extts handling
Extts events are disabled and enabled by the application ts2phc.
However, in case where the driver is removed when the application is
running, a specific extts event remains enabled and can cause a kernel
crash.
As a side effect, when the driver is reloaded and application is started
again, remaining extts event for the channel from a previous run will
keep firing and the message "extts on unexpected channel" might be
printed to the user.
To avoid that, extts events shall be disabled when PTP is released. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix double free err_addr pointer warnings
In amdgpu_umc_bad_page_polling_timeout, the amdgpu_umc_handle_bad_pages
will be run many times so that double free err_addr in some special case.
So set the err_addr to NULL to avoid the warnings. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: Don't process extts if PTP is disabled
The ice_ptp_extts_event() function can race with ice_ptp_release() and
result in a NULL pointer dereference which leads to a kernel panic.
Panic occurs because the ice_ptp_extts_event() function calls
ptp_clock_event() with a NULL pointer. The ice driver has already
released the PTP clock by the time the interrupt for the next external
timestamp event occurs.
To fix this, modify the ice_ptp_extts_event() function to check the
PTP state and bail early if PTP is not ready. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Take return from set_memory_ro() into account with bpf_prog_lock_ro()
set_memory_ro() can fail, leaving memory unprotected.
Check its return and take it into account as an error. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Take return from set_memory_rox() into account with bpf_jit_binary_lock_ro()
set_memory_rox() can fail, leaving memory unprotected.
Check return and bail out when bpf_jit_binary_lock_ro() returns
an error. |
