| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| rsync before 3.5.0 contains a symlink race condition vulnerability in the --remove-source-files feature that allows attackers with symlink creation access to cause arbitrary file deletion. Attackers can atomically substitute a symlink for a source file between transfer completion and the unlink() call, causing rsync to delete the symlink target rather than the intended source file. |
| rsync before 3.5.0 contains a symlink race condition vulnerability in the sender's source tree traversal that allows an attacker who can manipulate a parent directory of the source tree to redirect file reads to unintended paths. Attackers can atomically replace a parent directory component with a symlink pointing outside the source root between path resolution and file open operations to disclose file contents outside the intended transfer root. |
| rsync before 3.5.0 contains a time-of-check to time-of-use (TOCTOU) race condition vulnerability in the non-daemon receiver's destination directory handling that allows an attacker who can manipulate destination path parent components to redirect file writes to unintended locations. Attackers can substitute a symlink for a component of the destination path between the path resolution and chdir() call, causing the receiver's working directory to be established outside the intended destination tree so that subsequent relative-path file writes land in unintended filesystem locations. |
| llama.cpp builds b7492 through the latest b9060 contains a use-after-free vulnerability in llama-server affecting six tokenization endpoints (/tokenize, /detokenize, /infill, /apply-template, /rerank, and /anthropic/count_tokens) that bypass the task queue and access ctx_server.vocab directly on HTTP worker threads. Attackers can exploit a time-of-check-time-of-use race condition where the main thread destroys and frees vocab after the synchronization lock is released but before the handler finishes using it, causing a crash or potential code execution when --sleep-idle-seconds is configured. |
| llama.cpp builds b7492 through the latest b9060 contains a use-after-free vulnerability in the vocab pointer of llama-server when the --sleep-idle-seconds feature is enabled, allowing unauthenticated remote attackers to execute arbitrary code. Attackers can trigger the vulnerability by sending requests to affected endpoints while the server transitions to sleep mode, causing concurrent worker threads to dereference a freed vocab pointer that can be reclaimed with attacker-controlled data to achieve remote code execution. |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to gain unauthorized access to system objects due to a time-of-check to time-of-use (TOCTOU) race condition involving symbolic links. |
| Concurrent execution using shared resource with improper synchronization ('race condition') in Remote Desktop Client allows an unauthorized attacker to execute code over a network. |
| Concurrent execution using shared resource with improper synchronization ('race condition') in Windows Telephony Service allows an authorized attacker to elevate privileges locally. |
| Concurrent execution using shared resource with improper synchronization ('race condition') in Windows Event Logging Service allows an authorized attacker to elevate privileges locally. |
| Use after free in Windows Work Folder Service allows an authorized attacker to elevate privileges locally. |
| Time-of-check time-of-use (toctou) race condition in Windows Common Log File System Driver allows an authorized attacker to elevate privileges locally. |
| Use after free in Windows Kernel allows an authorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
net: airoha: Fix DMA direction for NPU mailbox buffer
airoha_npu_send_msg() always maps the mailbox buffer with DMA_TO_DEVICE,
but some callers expect the NPU to write response data back into the
same buffer:
- airoha_npu_wlan_msg_get() (NPU_OP_GET): NPU writes response into
the buffer, then the caller reads it via memcpy()
- airoha_npu_ppe_stats_setup() (NPU_OP_SET): NPU writes back
npu_stats_addr field in the response
On non-cache-coherent architectures like EN7581 (Cortex-A53 without
hardware cache coherency for NPU DMA), DMA_TO_DEVICE unmap is a no-op
— it does not invalidate the CPU cache. If the NPU-written cache line
is still present in the CPU cache when the caller reads the buffer,
the CPU observes stale data instead of the NPU response.
This is a timing-sensitive bug: small mailbox buffers (~24 bytes)
typically fit in a single cache line and may survive in the cache
until the caller reads them, producing silent data corruption rather
than a crash. The bug is more likely to trigger when the caller reads
the response immediately after dma_unmap_single() without intervening
cache-evicting operations.
Fix by using DMA_BIDIRECTIONAL for both map and unmap, which ensures
dma_unmap_single() invalidates the CPU cache on non-coherent systems.
The mailbox buffers are small so there is no performance concern. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: do not account for OoO in mptcp_rcvbuf_grow()
MPTCP-level OoOs are physiological when multiple subflows are active
concurrently and will not cause retransmissions nor are caused by
drops.
Accounting for them in mptcp_rcvbuf_grow() causes the rcvbuf slowly
drifting towards tcp_rmem[2].
Remove such accounting. Note that subflows will still account for TCP-level
OoO when the MPTCP-level rcvbuf is propagated.
This also closes a subtle and very unlikely race condition with rcvspace
init; active sockets with user-space holding the msk-level socket lock,
could complete such initialization in the receive callback, after that the
first OoO data reaches the rcvbuf and potentially triggering a divide by
zero Oops. |
| In the Linux kernel, the following vulnerability has been resolved:
media: chips-media: wave5: Move src_buf Removal to finish_encode
During encoder processing, there is a case where the IRQ response could
return the buffer back to userspace via v4l2_m2m_buf_done call. In this
time, userspace could queue up this same buffer before start_encode removes
the index from the ready queue. This would then lead to a case where the
buffer in the ready queue could be a self loop due to the
WRITE_ONCE(prev->next, new) call in __list_add.
When __list_del is finally called, the loop is already made so nothing
points back to ready queue list head and pointers are poisoned.
A buffer should not be marked as DONE before the buffer is removed from
m2m ready queue. Move removal entirely to finish_encode. |
| In the Linux kernel, the following vulnerability has been resolved:
ublk: wait on ublk_dev_ready() instead of ub->completion
ub->completion is only re-armed by a successful START_USER_RECOVERY. If
the ublk server sends END_USER_RECOVERY without one - e.g. its START
failed with -EBUSY and the error was ignored - the wait is satisfied by
the stale completion of the previous recovery cycle, and the device is
marked LIVE and the requeue list kicked while the FETCH stream is still
running and ubq->canceling is still set. The kick redispatches a
previously requeued request, __ublk_queue_rq_common() sees ->canceling
and parks it again via __ublk_abort_rq(), and after the last FETCH
clears ->canceling nothing ever kicks the requeue list again: the
request is stranded there while holding its tag. If it is the flush
machinery's flush_rq, every subsequent fsync piles up in uninterruptible
sleep and teardown hangs on tag draining. This matches a report of a
lost PREFLUSH with ext4 on top of ublk after daemon crash recovery.
ub->completion is an edge-triggered latch used as a proxy for the level
condition "every queue has fetched all I/O commands", which can regress
(F_BATCH's UNPREP, daemon death) and whose re-arm can be skipped. Drop
it and wait on the real condition instead: the new helper
ublk_wait_dev_ready_and_lock() waits on ublk_dev_ready() via
wait_var_event_interruptible(), woken from ublk_mark_io_ready(), then
re-checks it under ub->mutex, waiting again on regression, and returns
with the mutex held and readiness guaranteed.
Readiness becomes true in the same ub->mutex critical section that
clears the last queue's ->canceling, so END_USER_RECOVERY marks the
device LIVE and kicks the requeue list strictly after ->canceling
clears. The wait stays interruptible, so a server whose daemon died can
still be signalled out. For ublk_ctrl_start_dev() this replaces the
fail-fast -EINVAL on an F_BATCH ready->UNPREP regression with waiting
until the device is ready again. |
| In the Linux kernel, the following vulnerability has been resolved:
amt: fix use-after-free in AMT delayed works
When an AMT device is removed, pending delayed works can still access
the freed amt_dev structure, which may result in kernel crashes or
memory corruption.
amt_dev_stop() cancels req_wq and discovery_wq with
cancel_delayed_work_sync(), but these works can be scheduled again
from event_wq after the cancellation. This allows delayed works to
access the freed amt_dev structure after the netdev has been released.
The following is a simple race scenario:
CPU0 CPU1
amt_dev_stop()
cancel_delayed_work_sync()
amt_event_work()
mod_delayed_work(req_wq)
free netdev
req_wq accesses freed amt_dev
Use disable_delayed_work_sync() in amt_dev_stop() to prevent req_wq and
discovery_wq from being queued again and wait for running work items
to complete.
The delayed works are disabled after initialization in
amt_newlink() and enabled only when the device is successfully opened.
This keeps the delayed work lifecycle synchronized with the lifetime
of the AMT device. |
| A race condition was discovered in ext4_write_inline_data_end in fs/ext4/inline.c in the ext4 subsystem in the Linux kernel through 5.13.13. |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to obtain sensitive information and bypass security restrictions due to a race condition. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Don't leak PFN when kvm_translate_vncr() races MMU notifier
In the case that kvm_translate_vncr() races with an MMU notifier the
early return does not release a reference on the faulted in PFN. Add
the necessary call to kvm_release_faultin_page() for the unused PFN. |
