| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Race in GPU in Google Chrome on Windows prior to 147.0.7727.117 allowed a remote attacker to potentially perform a sandbox escape via a crafted video file. (Chromium security severity: Medium) |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix memory leaks and NULL deref in smb2_lock()
smb2_lock() has three error handling issues after list_del() detaches
smb_lock from lock_list at no_check_cl:
1) If vfs_lock_file() returns an unexpected error in the non-UNLOCK
path, goto out leaks smb_lock and its flock because the out:
handler only iterates lock_list and rollback_list, neither of
which contains the detached smb_lock.
2) If vfs_lock_file() returns -ENOENT in the UNLOCK path, goto out
leaks smb_lock and flock for the same reason. The error code
returned to the dispatcher is also stale.
3) In the rollback path, smb_flock_init() can return NULL on
allocation failure. The result is dereferenced unconditionally,
causing a kernel NULL pointer dereference. Add a NULL check to
prevent the crash and clean up the bookkeeping; the VFS lock
itself cannot be rolled back without the allocation and will be
released at file or connection teardown.
Fix cases 1 and 2 by hoisting the locks_free_lock()/kfree() to before
the if(!rc) check in the UNLOCK branch so all exit paths share one
free site, and by freeing smb_lock and flock before goto out in the
non-UNLOCK branch. Propagate the correct error code in both cases.
Fix case 3 by wrapping the VFS unlock in an if(rlock) guard and adding
a NULL check for locks_free_lock(rlock) in the shared cleanup.
Found via call-graph analysis using sqry. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix potential deadlock in cpu hotplug with osnoise
The following sequence may leads deadlock in cpu hotplug:
task1 task2 task3
----- ----- -----
mutex_lock(&interface_lock)
[CPU GOING OFFLINE]
cpus_write_lock();
osnoise_cpu_die();
kthread_stop(task3);
wait_for_completion();
osnoise_sleep();
mutex_lock(&interface_lock);
cpus_read_lock();
[DEAD LOCK]
Fix by swap the order of cpus_read_lock() and mutex_lock(&interface_lock). |
| Use after free in DevTools in Google Chrome prior to 147.0.7727.117 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) |
| In the Linux kernel, the following vulnerability has been resolved:
mm/userfaultfd: fix hugetlb fault mutex hash calculation
In mfill_atomic_hugetlb(), linear_page_index() is used to calculate the
page index for hugetlb_fault_mutex_hash(). However, linear_page_index()
returns the index in PAGE_SIZE units, while hugetlb_fault_mutex_hash()
expects the index in huge page units. This mismatch means that different
addresses within the same huge page can produce different hash values,
leading to the use of different mutexes for the same huge page. This can
cause races between faulting threads, which can corrupt the reservation
map and trigger the BUG_ON in resv_map_release().
Fix this by introducing hugetlb_linear_page_index(), which returns the
page index in huge page granularity, and using it in place of
linear_page_index(). |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: designware: amdisp: Fix resume-probe race condition issue
Identified resume-probe race condition in kernel v7.0 with the commit
38fa29b01a6a ("i2c: designware: Combine the init functions"),but this
issue existed from the beginning though not detected.
The amdisp i2c device requires ISP to be in power-on state for probe
to succeed. To meet this requirement, this device is added to genpd
to control ISP power using runtime PM. The pm_runtime_get_sync() called
before i2c_dw_probe() triggers PM resume, which powers on ISP and also
invokes the amdisp i2c runtime resume before the probe completes resulting
in this race condition and a NULL dereferencing issue in v7.0
Fix this race condition by using the genpd APIs directly during probe:
- Call dev_pm_genpd_resume() to Power ON ISP before probe
- Call dev_pm_genpd_suspend() to Power OFF ISP after probe
- Set the device to suspended state with pm_runtime_set_suspended()
- Enable runtime PM only after the device is fully initialized |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915: Unlink NV12 planes earlier
unlink_nv12_plane() will clobber parts of the plane state
potentially already set up by plane_atomic_check(), so we
must make sure not to call the two in the wrong order.
The problem happens when a plane previously selected as
a Y plane is now configured as a normal plane by user space.
plane_atomic_check() will first compute the proper plane
state based on the userspace request, and unlink_nv12_plane()
later clears some of the state.
This used to work on account of unlink_nv12_plane() skipping
the state clearing based on the plane visibility. But I removed
that check, thinking it was an impossible situation. Now when
that situation happens unlink_nv12_plane() will just WARN
and proceed to clobber the state.
Rather than reverting to the old way of doing things, I think
it's more clear if we unlink the NV12 planes before we even
compute the new plane state.
(cherry picked from commit 017ecd04985573eeeb0745fa2c23896fb22ee0cc) |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: KVM: Handle the case that EIOINTC's coremap is empty
EIOINTC's coremap in eiointc_update_sw_coremap() can be empty, currently
we get a cpuid with -1 in this case, but we actually need 0 because it's
similar as the case that cpuid >= 4.
This fix an out-of-bounds access to kvm_arch::phyid_map::phys_map[]. |
| In the Linux kernel, the following vulnerability has been resolved:
PM: sleep: Drop spurious WARN_ON() from pm_restore_gfp_mask()
Commit 35e4a69b2003f ("PM: sleep: Allow pm_restrict_gfp_mask()
stacking") introduced refcount-based GFP mask management that warns
when pm_restore_gfp_mask() is called with saved_gfp_count == 0.
Some hibernation paths call pm_restore_gfp_mask() defensively where
the GFP mask may or may not be restricted depending on the execution
path. For example, the uswsusp interface invokes it in
SNAPSHOT_CREATE_IMAGE, SNAPSHOT_UNFREEZE, and snapshot_release().
Before the stacking change this was a silent no-op; it now triggers
a spurious WARNING.
Remove the WARN_ON() wrapper from the !saved_gfp_count check while
retaining the check itself, so that defensive calls remain harmless
without producing false warnings.
[ rjw: Subject tweak ] |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: KVM: Fix base address calculation in kvm_eiointc_regs_access()
In function kvm_eiointc_regs_access(), the register base address is
caculated from array base address plus offset, the offset is absolute
value from the base address. The data type of array base address is
u64, it should be converted into the "void *" type and then plus the
offset. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix leak of rxgk context in rxgk_verify_response()
Fix rxgk_verify_response() to clean up the rxgk context it creates. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/cpu: Remove X86_CR4_FRED from the CR4 pinned bits mask
Commit in Fixes added the FRED CR4 bit to the CR4 pinned bits mask so
that whenever something else modifies CR4, that bit remains set. Which
in itself is a perfectly fine idea.
However, there's an issue when during boot FRED is initialized: first on
the BSP and later on the APs. Thus, there's a window in time when
exceptions cannot be handled.
This becomes particularly nasty when running as SEV-{ES,SNP} or TDX
guests which, when they manage to trigger exceptions during that short
window described above, triple fault due to FRED MSRs not being set up
yet.
See Link tag below for a much more detailed explanation of the
situation.
So, as a result, the commit in that Link URL tried to address this
shortcoming by temporarily disabling CR4 pinning when an AP is not
online yet.
However, that is a problem in itself because in this case, an attack on
the kernel needs to only modify the online bit - a single bit in RW
memory - and then disable CR4 pinning and then disable SM*P, leading to
more and worse things to happen to the system.
So, instead, remove the FRED bit from the CR4 pinning mask, thus
obviating the need to temporarily disable CR4 pinning.
If someone manages to disable FRED when poking at CR4, then
idt_invalidate() would make sure the system would crash'n'burn on the
first exception triggered, which is a much better outcome security-wise. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (powerz) Fix use-after-free on USB disconnect
After powerz_disconnect() frees the URB and releases the mutex, a
subsequent powerz_read() call can acquire the mutex and call
powerz_read_data(), which dereferences the freed URB pointer.
Fix by:
- Setting priv->urb to NULL in powerz_disconnect() so that
powerz_read_data() can detect the disconnected state.
- Adding a !priv->urb check at the start of powerz_read_data()
to return -ENODEV on a disconnected device.
- Moving usb_set_intfdata() before hwmon registration so the
disconnect handler can always find the priv pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: fix RESPONSE authenticator parser OOB read
rxgk_verify_authenticator() copies auth_len bytes into a temporary
buffer and then passes p + auth_len as the parser limit to
rxgk_do_verify_authenticator(). Since p is a __be32 *, that inflates the
parser end pointer by a factor of four and lets malformed RESPONSE
authenticators read past the kmalloc() buffer.
Decoded from the original latest-net reproduction logs with
scripts/decode_stacktrace.sh:
BUG: KASAN: slab-out-of-bounds in rxgk_verify_response()
Call Trace:
dump_stack_lvl() [lib/dump_stack.c:123]
print_report() [mm/kasan/report.c:379 mm/kasan/report.c:482]
kasan_report() [mm/kasan/report.c:597]
rxgk_verify_response()
[net/rxrpc/rxgk.c:1103 net/rxrpc/rxgk.c:1167
net/rxrpc/rxgk.c:1274]
rxrpc_process_connection()
[net/rxrpc/conn_event.c:266 net/rxrpc/conn_event.c:364
net/rxrpc/conn_event.c:386]
process_one_work() [kernel/workqueue.c:3281]
worker_thread()
[kernel/workqueue.c:3353 kernel/workqueue.c:3440]
kthread() [kernel/kthread.c:436]
ret_from_fork() [arch/x86/kernel/process.c:164]
Allocated by task 54:
rxgk_verify_response()
[include/linux/slab.h:954 net/rxrpc/rxgk.c:1155
net/rxrpc/rxgk.c:1274]
rxrpc_process_connection()
[net/rxrpc/conn_event.c:266 net/rxrpc/conn_event.c:364
net/rxrpc/conn_event.c:386]
Convert the byte count to __be32 units before constructing the parser
limit. |
| In the Linux kernel, the following vulnerability has been resolved:
media: mediatek: vcodec: fix use-after-free in encoder release path
The fops_vcodec_release() function frees the context structure (ctx)
without first cancelling any pending or running work in ctx->encode_work.
This creates a race window where the workqueue handler (mtk_venc_worker)
may still be accessing the context memory after it has been freed.
Race condition:
CPU 0 (release path) CPU 1 (workqueue)
--------------------- ------------------
fops_vcodec_release()
v4l2_m2m_ctx_release()
v4l2_m2m_cancel_job()
// waits for m2m job "done"
mtk_venc_worker()
v4l2_m2m_job_finish()
// m2m job "done"
// BUT worker still running!
// post-job_finish access:
other ctx dereferences
// UAF if ctx already freed
// returns (job "done")
kfree(ctx) // ctx freed
Root cause: The v4l2_m2m_ctx_release() only waits for the m2m job
lifecycle (via TRANS_RUNNING flag), not the workqueue lifecycle.
After v4l2_m2m_job_finish() is called, the m2m framework considers
the job complete and v4l2_m2m_ctx_release() returns, but the worker
function continues executing and may still access ctx.
The work is queued during encode operations via:
queue_work(ctx->dev->encode_workqueue, &ctx->encode_work)
The worker function accesses ctx->m2m_ctx, ctx->dev, and other ctx
fields even after calling v4l2_m2m_job_finish().
This vulnerability was confirmed with KASAN by running an instrumented
test module that widens the post-job_finish race window. KASAN detected:
BUG: KASAN: slab-use-after-free in mtk_venc_worker+0x159/0x180
Read of size 4 at addr ffff88800326e000 by task kworker/u8:0/12
Workqueue: mtk_vcodec_enc_wq mtk_venc_worker
Allocated by task 47:
__kasan_kmalloc+0x7f/0x90
fops_vcodec_open+0x85/0x1a0
Freed by task 47:
__kasan_slab_free+0x43/0x70
kfree+0xee/0x3a0
fops_vcodec_release+0xb7/0x190
Fix this by calling cancel_work_sync(&ctx->encode_work) before kfree(ctx).
This ensures the workqueue handler is both cancelled (if pending) and
synchronized (waits for any running handler to complete) before the
context is freed.
Placement rationale: The fix is placed after v4l2_ctrl_handler_free()
and before list_del_init(&ctx->list). At this point, all m2m operations
are done (v4l2_m2m_ctx_release() has returned), and we need to ensure
the workqueue is synchronized before removing ctx from the list and
freeing it.
Note: The open error path does NOT need cancel_work_sync() because
INIT_WORK() only initializes the work structure - it does not schedule
it. Work is only scheduled later during device_run() operations. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix key reference count leak from call->key
When creating a client call in rxrpc_alloc_client_call(), the code obtains
a reference to the key. This is never cleaned up and gets leaked when the
call is destroyed.
Fix this by freeing call->key in rxrpc_destroy_call().
Before the patch, it shows the key reference counter elevated:
$ cat /proc/keys | grep afs@54321
1bffe9cd I--Q--i 8053480 4169w 3b010000 1000 1000 rxrpc afs@54321: ka
$
After the patch, the invalidated key is removed when the code exits:
$ cat /proc/keys | grep afs@54321
$ |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix use of wrong skb when comparing queued RESP challenge serial
In rxrpc_post_response(), the code should be comparing the challenge serial
number from the cached response before deciding to switch to a newer
response, but looks at the newer packet private data instead, rendering the
comparison always false.
Fix this by switching to look at the older packet.
Fix further[1] to substitute the new packet in place of the old one if
newer and also to release whichever we don't use. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix key parsing memleak
In rxrpc_preparse_xdr_yfs_rxgk(), the memory attached to token->rxgk can be
leaked in a few error paths after it's allocated.
Fix this by freeing it in the "reject_token:" case. |
| In the Linux kernel, the following vulnerability has been resolved:
net: lan966x: fix use-after-free and leak in lan966x_fdma_reload()
When lan966x_fdma_reload() fails to allocate new RX buffers, the restore
path restarts DMA using old descriptors whose pages were already freed
via lan966x_fdma_rx_free_pages(). Since page_pool_put_full_page() can
release pages back to the buddy allocator, the hardware may DMA into
memory now owned by other kernel subsystems.
Additionally, on the restore path, the newly created page pool (if
allocation partially succeeded) is overwritten without being destroyed,
leaking it.
Fix both issues by deferring the release of old pages until after the
new allocation succeeds. Save the old page array before the allocation
so old pages can be freed on the success path. On the failure path, the
old descriptors, pages and page pool are all still valid, making the
restore safe. Also ensure the restore path re-enables NAPI and wakes
the netdev, matching the success path. |
| In the Linux kernel, the following vulnerability has been resolved:
net: lan966x: fix page_pool error handling in lan966x_fdma_rx_alloc_page_pool()
page_pool_create() can return an ERR_PTR on failure. The return value
is used unconditionally in the loop that follows, passing the error
pointer through xdp_rxq_info_reg_mem_model() into page_pool_use_xdp_mem(),
which dereferences it, causing a kernel oops.
Add an IS_ERR check after page_pool_create() to return early on failure. |
