| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: fix UAF in l2cap_le_connect_rsp
l2cap_le_connect_rsp() obtains a channel via
__l2cap_get_chan_by_ident() but neither holds a reference nor uses
l2cap_chan_hold_unless_zero() before locking and operating on it.
A concurrent l2cap_chan_del() triggered by a remote disconnect can
free the channel between the lookup and l2cap_chan_lock(), causing
a use-after-free.
The BR/EDR counterpart l2cap_connect_rsp() and the sibling handler
l2cap_le_command_rej() already use l2cap_chan_hold_unless_zero()
to safely hold a reference, but l2cap_le_connect_rsp() was left
unprotected.
Fix by adding l2cap_chan_hold_unless_zero() after the ident lookup
and l2cap_chan_put() on the exit path, consistent with other L2CAP
response handlers. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (lm90) Only report alarms if driver is ready
Userspace can read sysfs attributes before driver registration is complete,
immediately after devm_hwmon_device_register_with_info() has been called.
At that time, data->hwmon_dev is not yet initialized. This can trigger
a NULL pointer access since lm90_update_device() and with it
lm90_update_alarms_locked() will be called. This call schedules
report_work and lm90_report_alarms(), which passes the still-NULL
data->hwmon_dev to hwmon_notify_event() and triggers a NULL pointer
dereference.
Fix the problem by only scheduling the report and alert workers
data->hwmon_dev is set. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_hfsc: Don't make class passive twice
update_vf() is called from two places for the same class during a single
dequeue when the class's child qdisc (e.g. codel/fq_codel) drops its last
packets while dequeuing:
1. The child calls qdisc_tree_reduce_backlog(), which, now that the child
is empty, invokes hfsc_qlen_notify() -> update_vf(cl, 0, 0) and turns
the class passive (cl_nactive is decremented up the hierarchy).
2. hfsc_dequeue() then calls update_vf(cl, qdisc_pkt_len(skb), cur_time)
to charge the dequeued bytes.
On the second call the class is already passive, but its child qdisc is
still empty, so update_vf() arms go_passive again:
if (cl->qdisc->q.qlen == 0 && cl->cl_flags & HFSC_FSC)
go_passive = 1;
The leaf is then skipped by the cl_nactive == 0 check inside the loop,
which does not clear go_passive, so the stale go_passive propagates to the
parent and decrements its cl_nactive a second time. A parent that still
has other active children is driven to cl_nactive == 0 and removed from
the vttree, even though those siblings are still backlogged. They are
never dequeued again and the qdisc stalls.
Fix this by only arming go_passive when the class is actually active, so an
already-passive class no longer triggers a second passive transition. The
byte accounting (cl->cl_total += len) still runs for every ancestor, so
dequeued bytes continue to be counted exactly once. |
| In the Linux kernel, the following vulnerability has been resolved:
net: Stop leased rxq before uninstalling its memory provider
netif_rxq_cleanup_unlease() tears down the memory provider that was
installed on a physical RX queue through a netkit queue lease. It
currently revokes the provider's DMA mappings before stopping the
physical queue:
__netif_mp_uninstall_rxq(virt_rxq, p); /* DMA unmap */
__netif_mp_close_rxq(phys_rxq->dev, rxq_idx, p); /* queue stop */
This inverts the ordering used by the regular teardown paths (normal
device unregister and the io_uring zcrx close path), which stop the
queue before revoking the provider's mappings.
With the physical queue still live, its NAPI can keep consuming
net_iov entries from the page_pool alloc cache after the
__netif_mp_uninstall_rxq() has already cleared their dma_addr,
opening a window for the device to DMA to a stale or zero address.
Fix it by swapping the two calls so the queue is stopped (and its
NAPI quiesced) before the provider is uninstalled. No functional
regression was observed across repeated runs of the nk_qlease.py
HW selftest, which exercises the lease teardown path; this was
tested against fbnic QEMU emulation. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: seq: Clear variable event pointer on read
snd_seq_read() copies a queued variable-length event header to userspace
before expanding the payload. Queued variable-length events use
SNDRV_SEQ_EXT_CHAINED internally, and data.ext.ptr points at the first
extension cell.
The read side strips SNDRV_SEQ_EXT_* bits from data.ext.len before the
copy, but it leaves data.ext.ptr untouched. A userspace sequencer client
can therefore write a direct variable event to itself and read back the
extension-cell kernel address from the returned header.
Clear the temporary header pointer before copy_to_user(). The original
queued event remains unchanged and is still passed to
snd_seq_expand_var_event(), so payload expansion keeps using the
internal chain. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: rebase copied fsdlm LVB pointers in locking_state
The locking_state debugfs iterator snapshots struct ocfs2_lock_res by
value under ocfs2_dlm_tracking_lock and later formats that copy in
ocfs2_dlm_seq_show(). That is fine for the inline fields, but the
userspace fsdlm stack stores the LVB through lksb_fsdlm.sb_lvbptr. Once
the iterator drops the tracking lock, a copied non-NULL sb_lvbptr still
points into the original lockres owner, so teardown can free that
container before the debugfs dump walks the raw LVB bytes.
Rebase the copied sb_lvbptr to the copied l_lksb before dumping the raw
LVB. The seq snapshot already carries the inline LVB storage reserved in
struct ocfs2_dlm_lksb, so the debugfs reader can dump the copied bytes
without borrowing the original lockres lifetime.
The buggy scenario involves two paths, with each column showing the order
within that path:
locking_state reader: lockres teardown:
1. ocfs2_dlm_seq_start()/next() 1. file release or another owner
copies struct ocfs2_lock_res teardown reaches
2. ocfs2_dlm_seq_show() formats ocfs2_lock_res_free()
the copied row 2. the lockres is removed from the
3. ocfs2_dlm_lvb() follows the tracking list
copied sb_lvbptr 3. the owner frees the original
lockres container
Validation reproduced this kernel report:
KASAN slab-use-after-free in ocfs2_dlm_seq_show+0x1bd/0x430
RIP: 0033:0x7f8ec4b1e29d
The buggy address belongs to the object at ffff88810a1e0800 which belongs
to the cache kmalloc-1k of size 1024
The buggy address is located 368 bytes inside of freed 1024-byte region
[ffff88810a1e0800, ffff88810a1e0c00)
Read of size 1
Call trace:
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x630
ocfs2_dlm_seq_show+0x1bd/0x430 (fs/ocfs2/dlmglue.c:3137)
srso_alias_return_thunk+0x5/0xfbef5
__virt_addr_valid+0x19f/0x330
kasan_report+0xe0/0x110
seq_read_iter+0x29d/0x790
seq_read+0x20a/0x280
find_held_lock+0x2b/0x80
rcu_read_unlock+0x18/0x70
full_proxy_read+0x9e/0xd0
vfs_read+0x12c/0x590
ksys_read+0xd2/0x170
do_user_addr_fault+0x65a/0x890
do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Allocated by task stack:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
__kasan_kmalloc+0xaa/0xb0
ocfs2_file_open+0x13e/0x300
do_dentry_open+0x233/0x7f0
vfs_open+0x5a/0x1b0
path_openat+0x66d/0x1540
do_file_open+0x186/0x2b0
do_sys_openat2+0xce/0x150
__x64_sys_openat+0xd0/0x140
do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task stack:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x5f/0x80
kfree+0x313/0x590
ocfs2_file_release+0x138/0x260
__fput+0x1df/0x4b0
fput_close_sync+0xd2/0x170
__x64_sys_close+0x55/0x90
do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| In the Linux kernel, the following vulnerability has been resolved:
watchdog: unregister PM notifier on watchdog unregister
watchdog_register_device() registers wdd->pm_nb when
WDOG_NO_PING_ON_SUSPEND is set, but watchdog_unregister_device() does not
remove it. This leaves an embedded notifier block on the PM notifier chain
after the watchdog device has been unregistered.
A later suspend/resume notification can then call watchdog_pm_notifier()
with a stale watchdog_device pointer, or at minimum after wdd->wd_data has
been cleared by watchdog_dev_unregister().
Unregister the PM notifier before tearing down the watchdog device. |
| In the Linux kernel, the following vulnerability has been resolved:
of: reserved_mem: avoid post-init UAF when alloc_reserved_mem_array() fails
The global pointer 'reserved_mem' continues to reference the
reserved_mem_array which lives in __initdata if
alloc_reserved_mem_array() fails. of_reserved_mem_lookup() is
exported for post-init use, that would dereference freed memory
and trigger a use-after-free.
So reset reserved_mem_count to 0 when alloc_reserved_mem_array()
fails. |
| In the Linux kernel, the following vulnerability has been resolved:
configfs_lookup(): don't leave ->s_dentry dangling on failure
Normally ->s_dentry is cleared when dentry it's pointing to becomes
negative (on eviction, realistically). However, that only happens
if dentry gets to be positive in the first place; in case of inode
allocation failure dentry never becomes positive, so ->d_iput()
is not called at all.
We do part of what normally would've been done by configfs_d_iput()
(dropping the reference to configfs_dirent) manually, but we do
not clear ->s_dentry there. Sloppy as it is, it does not matter in
case of configfs_create_{dir,link}() - there configfs_dirent does
not survive dropping the sole reference to it.
However, for configfs_lookup() it *does* survive, with a dangling
pointer to soon to be freed dentry sitting it its ->s_dentry.
Subsequent getdents(2) in that directory will end up dereferencing
that pointer in order to pick the inode number. Use after free...
This is the minimal fix; the right approach is to set the linkage
between dentry and configfs_dirent only after we know that we have
an inode, but that takes more surgery and the bug had been there
since 2006, so... |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: fix UAF by restoring RCU-delayed inode freeing in bpffs
commit 4f375ade6aa9 ("bpf: Avoid RCU context warning when unpinning
htab with internal structs") moved inode cleanup from ->free_inode()
into ->destroy_inode() to avoid sleeping in RCU context when calling
bpf_any_put(). However this removed the RCU delay on freeing the
inode itself and the cached symlink body (i_link), both of which
can be accessed by RCU pathwalk (pick_link, may_lookup etc.).
This causes a use-after-free when a concurrent unlinkat() drops the
last inode reference and destroy_inode() frees the inode immediately,
while another task is still walking the path in RCU mode and reads
inode->i_opflags (offset +2) inside current_time() -> is_mgtime().
KASAN reports:
BUG: KASAN: slab-use-after-free in is_mgtime include/linux/fs.h:2313
Read of size 2 at addr ffff8880407e4282 (offset +2 = i_opflags)
The rules (per Al Viro):
->destroy_inode() called immediately, can sleep, use for blocking
cleanup e.g. bpf_any_put()
->free_inode() called after RCU grace period, use for freeing
inode and anything RCU-accessible e.g. i_link
Fix: split the two concerns properly:
- keep bpf_any_put() in bpf_destroy_inode() since it is blocking
and needs to run promptly
- introduce bpf_free_inode() to handle kfree(i_link) and
free_inode_nonrcu() with proper RCU delay, preventing the UAF |
| Libevent is an event notification library. Prior to 2.1.13 and 2.2.2-alpha, libevent has a use-after-free in buffer.c when evbuffer_add_buffer_reference processes an output buffer whose out_total_len is zero. evbuffer_free_all_chains frees the initial empty chain without resetting outbuf->first, outbuf->last, or outbuf->last_with_datap, and APPEND_CHAIN_MULTICAST subsequently dereferences the dangling chain pointer. A caller that can drive this buffer state can cause memory corruption or a process crash. This issue is fixed in versions 2.1.13 and 2.2.2-alpha. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: 6fire: Fix UAF at error handling during probe
Although 6fire driver had a few fixes for dealing with the early error
handling during the probe phase, it forgot a pending URB before
freeing the resources, which may lead to a UAF.
This patch addresses it by doing the almost same cleanup procedure
like the normal disconnect phase at the error path. |
| Use-after-free in the DOM: Core & HTML component. This vulnerability was fixed in Firefox 154, Firefox ESR 140.14, Firefox ESR 153.1, Thunderbird 154, Thunderbird 140.14, and Thunderbird 153.1. |
| Use-after-free in the Graphics: ImageLib component. This vulnerability was fixed in Firefox 154, Firefox ESR 115.39, Firefox ESR 140.14, Firefox ESR 153.1, Thunderbird 154, Thunderbird 140.14, and Thunderbird 153.1. |
| Use-after-free in the Graphics: Text component. This vulnerability was fixed in Firefox 154, Firefox ESR 115.39, Firefox ESR 140.14, Firefox ESR 153.1, Thunderbird 154, Thunderbird 140.14, and Thunderbird 153.1. |
| Use-after-free in the JavaScript: WebAssembly component. This vulnerability was fixed in Firefox 154, Firefox ESR 140.14, Firefox ESR 153.1, Thunderbird 154, Thunderbird 140.14, and Thunderbird 153.1. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free in __close_file_table_ids()
A ksmbd_file can remain alive after logical close while another session
holds a temporary reference obtained through ksmbd_lookup_fd_inode().
ksmbd_close_fd() currently marks the file closed and drops the idr-owned
reference, but leaves the pointer published in the closing session's idr
until the final reference is dropped.
If the foreign holder performs the final ksmbd_fd_put(), __put_fd_final()
supplies the foreign session's file table to __ksmbd_close_fd(). The object
is then freed without being removed from its owner's idr, and the owner
session later dereferences the stale pointer during file-table teardown.
Remove the volatile id from the owner's idr while ksmbd_close_fd() still
holds that table's lock, and clear volatile_id before dropping
the idr-owned reference. A later foreign final put then only performs
physical destruction and cannot remove the object from the wrong table. |
| In the Linux kernel, the following vulnerability has been resolved:
rds: tcp: hold the RCU lock across ipv6_chk_addr() in rds_tcp_laddr_check()
rds_tcp_laddr_check() looks up a scoped IPv6 interface with
dev_get_by_index_rcu(), drops the RCU read-side lock, and only then
passes the bare struct net_device * into ipv6_chk_addr().
dev_get_by_index_rcu() only keeps the device alive within the same RCU
read-side section. After rcu_read_unlock(), a concurrent RTM_DELLINK can
free the net_device; ipv6_chk_addr() then dereferences the stale pointer
in __ipv6_chk_addr_and_flags() (e.g. l3mdev_master_dev_rcu(dev)), reading
freed memory.
Keep the RCU read-side lock held across the ipv6_chk_addr() call instead
of dropping it right after the lookup, so the device cannot be freed
while it is in use.
BUG: KASAN: slab-use-after-free in __ipv6_chk_addr_and_flags (... net/ipv6/addrconf.c:1998)
Read of size 8 at addr ffff8880106ec000 by task exploit/153
Call Trace:
...
kasan_report (mm/kasan/report.c:595)
__ipv6_chk_addr_and_flags (... net/ipv6/addrconf.c:1998)
ipv6_chk_addr (net/ipv6/addrconf.c:2031 net/ipv6/addrconf.c:1972)
rds_tcp_laddr_check (net/rds/tcp.c:370)
rds_bind (net/rds/bind.c:248)
__sys_bind (net/socket.c:1920)
__x64_sys_bind (net/socket.c:1956)
do_syscall_64 (arch/x86/entry/syscall_64.c:63)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) |
| Use after free in Browser in Google Chrome on on Mac prior to 151.0.7922.169 allowed a remote attacker leveraging social engineering to execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| Use of uninitialized resource in GPU in Google Chrome prior to 151.0.7922.169 allowed a remote attacker who had compromised the renderer process to read memory outside the sandbox via a crafted HTML page. (Chromium security severity: High) |
