| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_sip: fix use of uninitialized rtp_addr in process_sdp
process_sdp() declares union nf_inet_addr rtp_addr on the stack and
passes it to the nf_nat_sip sdp_session hook after walking the SDP
media descriptions. However rtp_addr is only initialized inside the
media loop when a recognized media type with a non-zero port is found.
If the SDP body contains no m= lines, only inactive media sections
(m=audio 0 ...) or only unrecognized media types, rtp_addr is never
assigned. Despite that, the function still calls hooks->sdp_session()
with &rtp_addr, causing nf_nat_sdp_session() to format the stale stack
value as an IP address and rewrite the SDP session owner and connection
lines with it.
With CONFIG_INIT_STACK_ALL_ZERO (default on most distributions) this
results in the session-level o= and c= addresses being rewritten to
0.0.0.0 for inactive SDP sessions. Without stack auto-init the
rewritten address is whatever happened to be on the stack.
Fix this by pre-initializing rtp_addr from the session-level connection
address (caddr) when available, and tracking via a have_rtp_addr flag
whether any valid address was established. Skip the sdp_session hook
entirely when no valid address exists. |
| In the Linux kernel, the following vulnerability has been resolved:
net: atm: fix crash due to unvalidated vcc pointer in sigd_send()
Reproducer available at [1].
The ATM send path (sendmsg -> vcc_sendmsg -> sigd_send) reads the vcc
pointer from msg->vcc and uses it directly without any validation. This
pointer comes from userspace via sendmsg() and can be arbitrarily forged:
int fd = socket(AF_ATMSVC, SOCK_DGRAM, 0);
ioctl(fd, ATMSIGD_CTRL); // become ATM signaling daemon
struct msghdr msg = { .msg_iov = &iov, ... };
*(unsigned long *)(buf + 4) = 0xdeadbeef; // fake vcc pointer
sendmsg(fd, &msg, 0); // kernel dereferences 0xdeadbeef
In normal operation, the kernel sends the vcc pointer to the signaling
daemon via sigd_enq() when processing operations like connect(), bind(),
or listen(). The daemon is expected to return the same pointer when
responding. However, a malicious daemon can send arbitrary pointer values.
Fix this by introducing find_get_vcc() which validates the pointer by
searching through vcc_hash (similar to how sigd_close() iterates over
all VCCs), and acquires a reference via sock_hold() if found.
Since struct atm_vcc embeds struct sock as its first member, they share
the same lifetime. Therefore using sock_hold/sock_put is sufficient to
keep the vcc alive while it is being used.
Note that there may be a race with sigd_close() which could mark the vcc
with various flags (e.g., ATM_VF_RELEASED) after find_get_vcc() returns.
However, sock_hold() guarantees the memory remains valid, so this race
only affects the logical state, not memory safety.
[1]: https://gist.github.com/mrpre/1ba5949c45529c511152e2f4c755b0f3 |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Hold net reference for the lifetime of /proc/fs/nfs/exports fd
The /proc/fs/nfs/exports proc entry is created at module init
and persists for the module's lifetime. exports_proc_open()
captures the caller's current network namespace and stores
its svc_export_cache in seq->private, but takes no reference
on the namespace. If the namespace is subsequently torn down
(e.g. container destruction after the opener does setns() to a
different namespace), nfsd_net_exit() calls nfsd_export_shutdown()
which frees the cache. Subsequent reads on the still-open fd
dereference the freed cache_detail, walking a freed hash table.
Hold a reference on the struct net for the lifetime of the open
file descriptor. This prevents nfsd_net_exit() from running --
and thus prevents nfsd_export_shutdown() from freeing the cache
-- while any exports fd is open. cache_detail already stores
its net pointer (cd->net, set by cache_create_net()), so
exports_release() can retrieve it without additional per-file
storage. |
| In the Linux kernel, the following vulnerability has been resolved:
net: macb: fix use-after-free access to PTP clock
PTP clock is registered on every opening of the interface and destroyed on
every closing. However it may be accessed via get_ts_info ethtool call
which is possible while the interface is just present in the kernel.
BUG: KASAN: use-after-free in ptp_clock_index+0x47/0x50 drivers/ptp/ptp_clock.c:426
Read of size 4 at addr ffff8880194345cc by task syz.0.6/948
CPU: 1 PID: 948 Comm: syz.0.6 Not tainted 6.1.164+ #109
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.1-0-g3208b098f51a-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x8d/0xba lib/dump_stack.c:106
print_address_description mm/kasan/report.c:316 [inline]
print_report+0x17f/0x496 mm/kasan/report.c:420
kasan_report+0xd9/0x180 mm/kasan/report.c:524
ptp_clock_index+0x47/0x50 drivers/ptp/ptp_clock.c:426
gem_get_ts_info+0x138/0x1e0 drivers/net/ethernet/cadence/macb_main.c:3349
macb_get_ts_info+0x68/0xb0 drivers/net/ethernet/cadence/macb_main.c:3371
__ethtool_get_ts_info+0x17c/0x260 net/ethtool/common.c:558
ethtool_get_ts_info net/ethtool/ioctl.c:2367 [inline]
__dev_ethtool net/ethtool/ioctl.c:3017 [inline]
dev_ethtool+0x2b05/0x6290 net/ethtool/ioctl.c:3095
dev_ioctl+0x637/0x1070 net/core/dev_ioctl.c:510
sock_do_ioctl+0x20d/0x2c0 net/socket.c:1215
sock_ioctl+0x577/0x6d0 net/socket.c:1320
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl fs/ioctl.c:856 [inline]
__x64_sys_ioctl+0x18c/0x210 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:46 [inline]
do_syscall_64+0x35/0x80 arch/x86/entry/common.c:76
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
</TASK>
Allocated by task 457:
kmalloc include/linux/slab.h:563 [inline]
kzalloc include/linux/slab.h:699 [inline]
ptp_clock_register+0x144/0x10e0 drivers/ptp/ptp_clock.c:235
gem_ptp_init+0x46f/0x930 drivers/net/ethernet/cadence/macb_ptp.c:375
macb_open+0x901/0xd10 drivers/net/ethernet/cadence/macb_main.c:2920
__dev_open+0x2ce/0x500 net/core/dev.c:1501
__dev_change_flags+0x56a/0x740 net/core/dev.c:8651
dev_change_flags+0x92/0x170 net/core/dev.c:8722
do_setlink+0xaf8/0x3a80 net/core/rtnetlink.c:2833
__rtnl_newlink+0xbf4/0x1940 net/core/rtnetlink.c:3608
rtnl_newlink+0x63/0xa0 net/core/rtnetlink.c:3655
rtnetlink_rcv_msg+0x3c6/0xed0 net/core/rtnetlink.c:6150
netlink_rcv_skb+0x15d/0x430 net/netlink/af_netlink.c:2511
netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline]
netlink_unicast+0x6d7/0xa30 net/netlink/af_netlink.c:1344
netlink_sendmsg+0x97e/0xeb0 net/netlink/af_netlink.c:1872
sock_sendmsg_nosec net/socket.c:718 [inline]
__sock_sendmsg+0x14b/0x180 net/socket.c:730
__sys_sendto+0x320/0x3b0 net/socket.c:2152
__do_sys_sendto net/socket.c:2164 [inline]
__se_sys_sendto net/socket.c:2160 [inline]
__x64_sys_sendto+0xdc/0x1b0 net/socket.c:2160
do_syscall_x64 arch/x86/entry/common.c:46 [inline]
do_syscall_64+0x35/0x80 arch/x86/entry/common.c:76
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Freed by task 938:
kasan_slab_free include/linux/kasan.h:177 [inline]
slab_free_hook mm/slub.c:1729 [inline]
slab_free_freelist_hook mm/slub.c:1755 [inline]
slab_free mm/slub.c:3687 [inline]
__kmem_cache_free+0xbc/0x320 mm/slub.c:3700
device_release+0xa0/0x240 drivers/base/core.c:2507
kobject_cleanup lib/kobject.c:681 [inline]
kobject_release lib/kobject.c:712 [inline]
kref_put include/linux/kref.h:65 [inline]
kobject_put+0x1cd/0x350 lib/kobject.c:729
put_device+0x1b/0x30 drivers/base/core.c:3805
ptp_clock_unregister+0x171/0x270 drivers/ptp/ptp_clock.c:391
gem_ptp_remove+0x4e/0x1f0 drivers/net/ethernet/cadence/macb_ptp.c:404
macb_close+0x1c8/0x270 drivers/net/ethernet/cadence/macb_main.c:2966
__dev_close_many+0x1b9/0x310 net/core/dev.c:1585
__dev_close net/core/dev.c:1597 [inline]
__dev_change_flags+0x2bb/0x740 net/core/dev.c:8649
dev_change_fl
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
spi: fix use-after-free on controller registration failure
Make sure to deregister from driver core also in the unlikely event that
per-cpu statistics allocation fails during controller registration to
avoid use-after-free (of driver resources) and unclocked register
accesses. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: fix statistics allocation
The controller per-cpu statistics is not allocated until after the
controller has been registered with driver core, which leaves a window
where accessing the sysfs attributes can trigger a NULL-pointer
dereference.
Fix this by moving the statistics allocation to controller allocation
while tying its lifetime to that of the controller (rather than using
implicit devres). |
| In the Linux kernel, the following vulnerability has been resolved:
net: mana: fix use-after-free in mana_hwc_destroy_channel() by reordering teardown
A potential race condition exists in mana_hwc_destroy_channel() where
hwc->caller_ctx is freed before the HWC's Completion Queue (CQ) and
Event Queue (EQ) are destroyed. This allows an in-flight CQ interrupt
handler to dereference freed memory, leading to a use-after-free or
NULL pointer dereference in mana_hwc_handle_resp().
mana_smc_teardown_hwc() signals the hardware to stop but does not
synchronize against IRQ handlers already executing on other CPUs. The
IRQ synchronization only happens in mana_hwc_destroy_cq() via
mana_gd_destroy_eq() -> mana_gd_deregister_irq(). Since this runs
after kfree(hwc->caller_ctx), a concurrent mana_hwc_rx_event_handler()
can dereference freed caller_ctx (and rxq->msg_buf) in
mana_hwc_handle_resp().
Fix this by reordering teardown to reverse-of-creation order: destroy
the TX/RX work queues and CQ/EQ before freeing hwc->caller_ctx. This
ensures all in-flight interrupt handlers complete before the memory they
access is freed. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: rawnand: serialize lock/unlock against other NAND operations
nand_lock() and nand_unlock() call into chip->ops.lock_area/unlock_area
without holding the NAND device lock. On controllers that implement
SET_FEATURES via multiple low-level PIO commands, these can race with
concurrent UBI/UBIFS background erase/write operations that hold the
device lock, resulting in cmd_pending conflicts on the NAND controller.
Add nand_get_device()/nand_release_device() around the lock/unlock
operations to serialize them against all other NAND controller access. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: release flowtable after rcu grace period on error
Call synchronize_rcu() after unregistering the hooks from error path,
since a hook that already refers to this flowtable can be already
registered, exposing this flowtable to packet path and nfnetlink_hook
control plane.
This error path is rare, it should only happen by reaching the maximum
number hooks or by failing to set up to hardware offload, just call
synchronize_rcu().
There is a check for already used device hooks by different flowtable
that could result in EEXIST at this late stage. The hook parser can be
updated to perform this check earlier to this error path really becomes
rarely exercised.
Uncovered by KASAN reported as use-after-free from nfnetlink_hook path
when dumping hooks. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: fix nd_tbl NULL dereference when IPv6 is disabled
When booting with the 'ipv6.disable=1' parameter, the nd_tbl is never
initialized because inet6_init() exits before ndisc_init() is called
which initializes it. Then, if neigh_suppress is enabled and an ICMPv6
Neighbor Discovery packet reaches the bridge, br_do_suppress_nd() will
dereference ipv6_stub->nd_tbl which is NULL, passing it to
neigh_lookup(). This causes a kernel NULL pointer dereference.
BUG: kernel NULL pointer dereference, address: 0000000000000268
Oops: 0000 [#1] PREEMPT SMP NOPTI
[...]
RIP: 0010:neigh_lookup+0x16/0xe0
[...]
Call Trace:
<IRQ>
? neigh_lookup+0x16/0xe0
br_do_suppress_nd+0x160/0x290 [bridge]
br_handle_frame_finish+0x500/0x620 [bridge]
br_handle_frame+0x353/0x440 [bridge]
__netif_receive_skb_core.constprop.0+0x298/0x1110
__netif_receive_skb_one_core+0x3d/0xa0
process_backlog+0xa0/0x140
__napi_poll+0x2c/0x170
net_rx_action+0x2c4/0x3a0
handle_softirqs+0xd0/0x270
do_softirq+0x3f/0x60
Fix this by replacing IS_ENABLED(IPV6) call with ipv6_mod_enabled() in
the callers. This is in essence disabling NS/NA suppression when IPv6 is
disabled. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: radiotap: reject radiotap with unknown bits
The radiotap parser is currently only used with the radiotap
namespace (not with vendor namespaces), but if the undefined
field 18 is used, the alignment/size is unknown as well. In
this case, iterator->_next_ns_data isn't initialized (it's
only set for skipping vendor namespaces), and syzbot points
out that we later compare against this uninitialized value.
Fix this by moving the rejection of unknown radiotap fields
down to after the in-namespace lookup, so it will really use
iterator->_next_ns_data only for vendor namespaces, even in
case undefined fields are present. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_set_pipapo: split gc into unlink and reclaim phase
Yiming Qian reports Use-after-free in the pipapo set type:
Under a large number of expired elements, commit-time GC can run for a very
long time in a non-preemptible context, triggering soft lockup warnings and
RCU stall reports (local denial of service).
We must split GC in an unlink and a reclaim phase.
We cannot queue elements for freeing until pointers have been swapped.
Expired elements are still exposed to both the packet path and userspace
dumpers via the live copy of the data structure.
call_rcu() does not protect us: dump operations or element lookups starting
after call_rcu has fired can still observe the free'd element, unless the
commit phase has made enough progress to swap the clone and live pointers
before any new reader has picked up the old version.
This a similar approach as done recently for the rbtree backend in commit
35f83a75529a ("netfilter: nft_set_rbtree: don't gc elements on insert"). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: cancel rfkill_block work in wiphy_unregister()
There is a use-after-free error in cfg80211_shutdown_all_interfaces found
by syzkaller:
BUG: KASAN: use-after-free in cfg80211_shutdown_all_interfaces+0x213/0x220
Read of size 8 at addr ffff888112a78d98 by task kworker/0:5/5326
CPU: 0 UID: 0 PID: 5326 Comm: kworker/0:5 Not tainted 6.19.0-rc2 #2 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Workqueue: events cfg80211_rfkill_block_work
Call Trace:
<TASK>
dump_stack_lvl+0x116/0x1f0
print_report+0xcd/0x630
kasan_report+0xe0/0x110
cfg80211_shutdown_all_interfaces+0x213/0x220
cfg80211_rfkill_block_work+0x1e/0x30
process_one_work+0x9cf/0x1b70
worker_thread+0x6c8/0xf10
kthread+0x3c5/0x780
ret_from_fork+0x56d/0x700
ret_from_fork_asm+0x1a/0x30
</TASK>
The problem arises due to the rfkill_block work is not cancelled when wiphy
is being unregistered. In order to fix the issue cancel the corresponding
work in wiphy_unregister().
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix a UAF issue in bpf_trampoline_link_cgroup_shim
The root cause of this bug is that when 'bpf_link_put' reduces the
refcount of 'shim_link->link.link' to zero, the resource is considered
released but may still be referenced via 'tr->progs_hlist' in
'cgroup_shim_find'. The actual cleanup of 'tr->progs_hlist' in
'bpf_shim_tramp_link_release' is deferred. During this window, another
process can cause a use-after-free via 'bpf_trampoline_link_cgroup_shim'.
Based on Martin KaFai Lau's suggestions, I have created a simple patch.
To fix this:
Add an atomic non-zero check in 'bpf_trampoline_link_cgroup_shim'.
Only increment the refcount if it is not already zero.
Testing:
I verified the fix by adding a delay in
'bpf_shim_tramp_link_release' to make the bug easier to trigger:
static void bpf_shim_tramp_link_release(struct bpf_link *link)
{
/* ... */
if (!shim_link->trampoline)
return;
+ msleep(100);
WARN_ON_ONCE(bpf_trampoline_unlink_prog(&shim_link->link,
shim_link->trampoline, NULL));
bpf_trampoline_put(shim_link->trampoline);
}
Before the patch, running a PoC easily reproduced the crash(almost 100%)
with a call trace similar to KaiyanM's report.
After the patch, the bug no longer occurs even after millions of
iterations. |
| In the Linux kernel, the following vulnerability has been resolved:
net: vxlan: fix nd_tbl NULL dereference when IPv6 is disabled
When booting with the 'ipv6.disable=1' parameter, the nd_tbl is never
initialized because inet6_init() exits before ndisc_init() is called
which initializes it. If an IPv6 packet is injected into the interface,
route_shortcircuit() is called and a NULL pointer dereference happens on
neigh_lookup().
BUG: kernel NULL pointer dereference, address: 0000000000000380
Oops: Oops: 0000 [#1] SMP NOPTI
[...]
RIP: 0010:neigh_lookup+0x20/0x270
[...]
Call Trace:
<TASK>
vxlan_xmit+0x638/0x1ef0 [vxlan]
dev_hard_start_xmit+0x9e/0x2e0
__dev_queue_xmit+0xbee/0x14e0
packet_sendmsg+0x116f/0x1930
__sys_sendto+0x1f5/0x200
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x12f/0x1590
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fix this by adding an early check on route_shortcircuit() when protocol
is ETH_P_IPV6. Note that ipv6_mod_enabled() cannot be used here because
VXLAN can be built-in even when IPv6 is built as a module. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: libertas: fix use-after-free in lbs_free_adapter()
The lbs_free_adapter() function uses timer_delete() (non-synchronous)
for both command_timer and tx_lockup_timer before the structure is
freed. This is incorrect because timer_delete() does not wait for
any running timer callback to complete.
If a timer callback is executing when lbs_free_adapter() is called,
the callback will access freed memory since lbs_cfg_free() frees the
containing structure immediately after lbs_free_adapter() returns.
Both timer callbacks (lbs_cmd_timeout_handler and lbs_tx_lockup_handler)
access priv->driver_lock, priv->cur_cmd, priv->dev, and other fields,
which would all be use-after-free violations.
Use timer_delete_sync() instead to ensure any running timer callback
has completed before returning.
This bug was introduced in commit 8f641d93c38a ("libertas: detect TX
lockups and reset hardware") where del_timer() was used instead of
del_timer_sync() in the cleanup path. The command_timer has had the
same issue since the driver was first written. |
| In the Linux kernel, the following vulnerability has been resolved:
padata: fix UAF in padata_reorder
A bug was found when run ltp test:
BUG: KASAN: slab-use-after-free in padata_find_next+0x29/0x1a0
Read of size 4 at addr ffff88bbfe003524 by task kworker/u113:2/3039206
CPU: 0 PID: 3039206 Comm: kworker/u113:2 Kdump: loaded Not tainted 6.6.0+
Workqueue: pdecrypt_parallel padata_parallel_worker
Call Trace:
<TASK>
dump_stack_lvl+0x32/0x50
print_address_description.constprop.0+0x6b/0x3d0
print_report+0xdd/0x2c0
kasan_report+0xa5/0xd0
padata_find_next+0x29/0x1a0
padata_reorder+0x131/0x220
padata_parallel_worker+0x3d/0xc0
process_one_work+0x2ec/0x5a0
If 'mdelay(10)' is added before calling 'padata_find_next' in the
'padata_reorder' function, this issue could be reproduced easily with
ltp test (pcrypt_aead01).
This can be explained as bellow:
pcrypt_aead_encrypt
...
padata_do_parallel
refcount_inc(&pd->refcnt); // add refcnt
...
padata_do_serial
padata_reorder // pd
while (1) {
padata_find_next(pd, true); // using pd
queue_work_on
...
padata_serial_worker crypto_del_alg
padata_put_pd_cnt // sub refcnt
padata_free_shell
padata_put_pd(ps->pd);
// pd is freed
// loop again, but pd is freed
// call padata_find_next, UAF
}
In the padata_reorder function, when it loops in 'while', if the alg is
deleted, the refcnt may be decreased to 0 before entering
'padata_find_next', which leads to UAF.
As mentioned in [1], do_serial is supposed to be called with BHs disabled
and always happen under RCU protection, to address this issue, add
synchronize_rcu() in 'padata_free_shell' wait for all _do_serial calls
to finish.
[1] https://lore.kernel.org/all/20221028160401.cccypv4euxikusiq@parnassus.localdomain/
[2] https://lore.kernel.org/linux-kernel/jfjz5d7zwbytztackem7ibzalm5lnxldi2eofeiczqmqs2m7o6@fq426cwnjtkm/ |
| Use-after-free in the JavaScript Engine: JIT component. This vulnerability was fixed in Firefox 158, Firefox ESR 115.43, Firefox ESR 153.5, Thunderbird 158, and Thunderbird 153.5. |
| Untrusted pointer dereference in Microsoft Office Word allows an unauthorized attacker to execute code over a network. |
| A flaw was found in DPDK lib/vhost vhost-crypto. Write-back chain cleanup can follow an uninitialized next pointer when mapping a guest descriptor fails, causing the host vhost-crypto process to hang or crash. |
