| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mm/hugetlb: restore failed global reservations to subpool
Commit a833a693a490 ("mm: hugetlb: fix incorrect fallback for subpool")
fixed an underflow error for hstate->resv_huge_pages caused by incorrectly
attributing globally requested pages to the subpool's reservation.
Unfortunately, this fix also introduced the opposite problem, which would
leave spool->used_hpages elevated if the globally requested pages could
not be acquired. This is because while a subpool's reserve pages only
accounts for what is requested and allocated from the subpool, its "used"
counter keeps track of what is consumed in total, both from the subpool
and globally. Thus, we need to adjust spool->used_hpages in the other
direction, and make sure that globally requested pages are uncharged from
the subpool's used counter.
Each failed allocation attempt increments the used_hpages counter by how
many pages were requested from the global pool. Ultimately, this renders
the subpool unusable, as used_hpages approaches the max limit.
The issue can be reproduced as follows:
1. Allocate 4 hugetlb pages
2. Create a hugetlb mount with max=4, min=2
3. Consume 2 pages globally
4. Request 3 pages from the subpool (2 from subpool + 1 from global)
4.1 hugepage_subpool_get_pages(spool, 3) succeeds.
used_hpages += 3
4.2 hugetlb_acct_memory(h, 1) fails: no global pages left
used_hpages -= 2
5. Subpool now has used_hpages = 1, despite not being able to
successfully allocate any hugepages. It believes it can now only
allocate 3 more hugepages, not 4.
With each failed allocation attempt incrementing the used counter, the
subpool eventually reaches a point where its used counter equals its
max counter. At that point, any future allocations that try to
allocate hugeTLB pages from the subpool will fail, despite the subpool
not having any of its hugeTLB pages consumed by any user.
Once this happens, there is no way to make the subpool usable again,
since there is no way to decrement the used counter as no process is
really consuming the hugeTLB pages.
The underflow issue that the original commit fixes still remains fixed
as well.
Without this fix, used_hpages would keep on leaking if
hugetlb_acct_memory() fails. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: microchip: Fix error path in PTP IRQ setup
If request_threaded_irq() fails during the PTP message IRQ setup, the
newly created IRQ mapping is never disposed. Indeed, the
ksz_ptp_irq_setup()'s error path only frees the mappings that were
successfully set up.
Dispose the newly created mapping if the associated
request_threaded_irq() fails at setup. |
| In the Linux kernel, the following vulnerability has been resolved:
ublk: fix NULL pointer dereference in ublk_ctrl_set_size()
ublk_ctrl_set_size() unconditionally dereferences ub->ub_disk via
set_capacity_and_notify() without checking if it is NULL.
ub->ub_disk is NULL before UBLK_CMD_START_DEV completes (it is only
assigned in ublk_ctrl_start_dev()) and after UBLK_CMD_STOP_DEV runs
(ublk_detach_disk() sets it to NULL). Since the UBLK_CMD_UPDATE_SIZE
handler performs no state validation, a user can trigger a NULL pointer
dereference by sending UPDATE_SIZE to a device that has been added but
not yet started, or one that has been stopped.
Fix this by checking ub->ub_disk under ub->mutex before dereferencing
it, and returning -ENODEV if the disk is not available. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/apic: Disable x2apic on resume if the kernel expects so
When resuming from s2ram, firmware may re-enable x2apic mode, which may have
been disabled by the kernel during boot either because it doesn't support IRQ
remapping or for other reasons. This causes the kernel to continue using the
xapic interface, while the hardware is in x2apic mode, which causes hangs.
This happens on defconfig + bare metal + s2ram.
Fix this in lapic_resume() by disabling x2apic if the kernel expects it to be
disabled, i.e. when x2apic_mode = 0.
The ACPI v6.6 spec, Section 16.3 [1] says firmware restores either the
pre-sleep configuration or initial boot configuration for each CPU, including
MSR state:
When executing from the power-on reset vector as a result of waking from an
S2 or S3 sleep state, the platform firmware performs only the hardware
initialization required to restore the system to either the state the
platform was in prior to the initial operating system boot, or to the
pre-sleep configuration state. In multiprocessor systems, non-boot
processors should be placed in the same state as prior to the initial
operating system boot.
(further ahead)
If this is an S2 or S3 wake, then the platform runtime firmware restores
minimum context of the system before jumping to the waking vector. This
includes:
CPU configuration. Platform runtime firmware restores the pre-sleep
configuration or initial boot configuration of each CPU (MSR, MTRR,
firmware update, SMBase, and so on). Interrupts must be disabled (for
IA-32 processors, disabled by CLI instruction).
(and other things)
So at least as per the spec, re-enablement of x2apic by the firmware is
allowed if "x2apic on" is a part of the initial boot configuration.
[1] https://uefi.org/specs/ACPI/6.6/16_Waking_and_Sleeping.html#initialization
[ bp: Massage. ] |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: add missing RCU unlock in error path in try_release_subpage_extent_buffer()
Call rcu_read_lock() before exiting the loop in
try_release_subpage_extent_buffer() because there is a rcu_read_unlock()
call past the loop.
This has been detected by the Clang thread-safety analyzer. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: gyro: mpu3050-core: fix pm_runtime error handling
The return value of pm_runtime_get_sync() is not checked, allowing
the driver to access hardware that may fail to resume. The device
usage count is also unconditionally incremented. Use
pm_runtime_resume_and_get() which propagates errors and avoids
incrementing the usage count on failure.
In preenable, add pm_runtime_put_autosuspend() on set_8khz_samplerate()
failure since postdisable does not run when preenable fails. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: imu: adis: Fix NULL pointer dereference in adis_init
The adis_init() function dereferences adis->ops to check if the
individual function pointers (write, read, reset) are NULL, but does
not first check if adis->ops itself is NULL.
Drivers like adis16480, adis16490, adis16545 and others do not set
custom ops and rely on adis_init() assigning the defaults. Since struct
adis is zero-initialized by devm_iio_device_alloc(), adis->ops is NULL
when adis_init() is called, causing a NULL pointer dereference:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
pc : adis_init+0xc0/0x118
Call trace:
adis_init+0xc0/0x118
adis16480_probe+0xe0/0x670
Fix this by checking if adis->ops is NULL before dereferencing it,
falling through to assign the default ops in that case. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd: Fix a few more NULL pointer dereference in device cleanup
I found a few more paths that cleanup fails due to a NULL version pointer
on unsupported hardware.
Add NULL checks as applicable.
(cherry picked from commit f5a05f8414fc10f307eb965f303580c7778f8dd2) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd: Fix NULL pointer dereference in device cleanup
When GPU initialization fails due to an unsupported HW block
IP blocks may have a NULL version pointer. During cleanup in
amdgpu_device_fini_hw, the code calls amdgpu_device_set_pg_state and
amdgpu_device_set_cg_state which iterate over all IP blocks and access
adev->ip_blocks[i].version without NULL checks, leading to a kernel
NULL pointer dereference.
Add NULL checks for adev->ip_blocks[i].version in both
amdgpu_device_set_cg_state and amdgpu_device_set_pg_state to prevent
dereferencing NULL pointers during GPU teardown when initialization has
failed.
(cherry picked from commit b7ac77468cda92eecae560b05f62f997a12fe2f2) |
| In the Linux kernel, the following vulnerability has been resolved:
net: macb: Shuffle the tx ring before enabling tx
Quanyang observed that when using an NFS rootfs on an AMD ZynqMp board,
the rootfs may take an extended time to recover after a suspend.
Upon investigation, it was determined that the issue originates from a
problem in the macb driver.
According to the Zynq UltraScale TRM [1], when transmit is disabled,
the transmit buffer queue pointer resets to point to the address
specified by the transmit buffer queue base address register.
In the current implementation, the code merely resets `queue->tx_head`
and `queue->tx_tail` to '0'. This approach presents several issues:
- Packets already queued in the tx ring are silently lost,
leading to memory leaks since the associated skbs cannot be released.
- Concurrent write access to `queue->tx_head` and `queue->tx_tail` may
occur from `macb_tx_poll()` or `macb_start_xmit()` when these values
are reset to '0'.
- The transmission may become stuck on a packet that has already been sent
out, with its 'TX_USED' bit set, but has not yet been processed. However,
due to the manipulation of 'queue->tx_head' and 'queue->tx_tail',
`macb_tx_poll()` incorrectly assumes there are no packets to handle
because `queue->tx_head == queue->tx_tail`. This issue is only resolved
when a new packet is placed at this position. This is the root cause of
the prolonged recovery time observed for the NFS root filesystem.
To resolve this issue, shuffle the tx ring and tx skb array so that
the first unsent packet is positioned at the start of the tx ring.
Additionally, ensure that updates to `queue->tx_head` and
`queue->tx_tail` are properly protected with the appropriate lock.
[1] https://docs.amd.com/v/u/en-US/ug1085-zynq-ultrascale-trm |
| In the Linux kernel, the following vulnerability has been resolved:
net: ncsi: fix skb leak in error paths
Early return paths in NCSI RX and AEN handlers fail to release
the received skb, resulting in a memory leak.
Specifically, ncsi_aen_handler() returns on invalid AEN packets
without consuming the skb. Similarly, ncsi_rcv_rsp() exits early
when failing to resolve the NCSI device, response handler, or
request, leaving the skb unfreed. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mctp: fix device leak on probe failure
Driver core holds a reference to the USB interface and its parent USB
device while the interface is bound to a driver and there is no need to
take additional references unless the structures are needed after
disconnect.
This driver takes a reference to the USB device during probe but does
not to release it on probe failures.
Drop the redundant device reference to fix the leak, reduce cargo
culting, make it easier to spot drivers where an extra reference is
needed, and reduce the risk of further memory leaks. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free by using call_rcu() for oplock_info
ksmbd currently frees oplock_info immediately using kfree(), even
though it is accessed under RCU read-side critical sections in places
like opinfo_get() and proc_show_files().
Since there is no RCU grace period delay between nullifying the pointer
and freeing the memory, a reader can still access oplock_info
structure after it has been freed. This can leads to a use-after-free
especially in opinfo_get() where atomic_inc_not_zero() is called on
already freed memory.
Fix this by switching to deferred freeing using call_rcu(). |
| In the Linux kernel, the following vulnerability has been resolved:
media: chips-media: wave5: Fix PM runtime usage count underflow
Replace pm_runtime_put_sync() with pm_runtime_dont_use_autosuspend() in
the remove path to properly pair with pm_runtime_use_autosuspend() from
probe. This allows pm_runtime_disable() to handle reference count cleanup
correctly regardless of current suspend state.
The driver calls pm_runtime_put_sync() unconditionally in remove, but the
device may already be suspended due to autosuspend configured in probe.
When autosuspend has already suspended the device, the usage count is 0,
and pm_runtime_put_sync() decrements it to -1.
This causes the following warning on module unload:
------------[ cut here ]------------
WARNING: CPU: 1 PID: 963 at kernel/kthread.c:1430
kthread_destroy_worker+0x84/0x98
...
vdec 30210000.video-codec: Runtime PM usage count underflow! |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix transaction abort on set received ioctl due to item overflow
If the set received ioctl fails due to an item overflow when attempting to
add the BTRFS_UUID_KEY_RECEIVED_SUBVOL we have to abort the transaction
since we did some metadata updates before.
This means that if a user calls this ioctl with the same received UUID
field for a lot of subvolumes, we will hit the overflow, trigger the
transaction abort and turn the filesystem into RO mode. A malicious user
could exploit this, and this ioctl does not even requires that a user
has admin privileges (CAP_SYS_ADMIN), only that he/she owns the subvolume.
Fix this by doing an early check for item overflow before starting a
transaction. This is also race safe because we are holding the subvol_sem
semaphore in exclusive (write) mode.
A test case for fstests will follow soon. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: Don't log keys in SMB3 signing and encryption key generation
When KSMBD_DEBUG_AUTH logging is enabled, generate_smb3signingkey() and
generate_smb3encryptionkey() log the session, signing, encryption, and
decryption key bytes. Remove the logs to avoid exposing credentials. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: Workaround SQM/PSE stalls by disabling sticky
NIX SQ manager sticky mode is known to cause stalls when multiple SQs
share an SMQ and transmit concurrently. Additionally, PSE may deadlock
on transitions between sticky and non-sticky transmissions. There is
also a credit drop issue observed when certain condition clocks are
gated.
work around these hardware errata by:
- Disabling SQM sticky operation:
- Clear TM6 (bit 15)
- Clear TM11 (bit 14)
- Disabling sticky → non-sticky transition path that can deadlock PSE:
- Clear TM5 (bit 23)
- Preventing credit drops by keeping the control-flow clock enabled:
- Set TM9 (bit 21)
These changes are applied via NIX_AF_SQM_DBG_CTL_STATUS. With this
configuration the SQM/PSE maintain forward progress under load without
credit loss, at the cost of disabling sticky optimizations. |
| In the Linux kernel, the following vulnerability has been resolved:
media: rockchip: rga: Fix possible ERR_PTR dereference in rga_buf_init()
rga_get_frame() can return ERR_PTR(-EINVAL) when buffer type is
unsupported or invalid. rga_buf_init() does not check the return value
and unconditionally dereferences the pointer when accessing f->size.
Add proper ERR_PTR checking and return the error to prevent
dereferencing an invalid pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panel: Fix a possible null-pointer dereference in jdi_panel_dsi_remove()
In jdi_panel_dsi_remove(), jdi is explicitly checked, indicating that it
may be NULL:
if (!jdi)
mipi_dsi_detach(dsi);
However, when jdi is NULL, the function does not return and continues by
calling jdi_panel_disable():
err = jdi_panel_disable(&jdi->base);
Inside jdi_panel_disable(), jdi is dereferenced unconditionally, which can
lead to a NULL-pointer dereference:
struct jdi_panel *jdi = to_panel_jdi(panel);
backlight_disable(jdi->backlight);
To prevent such a potential NULL-pointer dereference, return early from
jdi_panel_dsi_remove() when jdi is NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/v3d: Set DMA segment size to avoid debug warnings
When using V3D rendering with CONFIG_DMA_API_DEBUG enabled, the
kernel occasionally reports a segment size mismatch. This is because
'max_seg_size' is not set. The kernel defaults to 64K. setting
'max_seg_size' to the maximum will prevent 'debug_dma_map_sg()'
from complaining about the over-mapping of the V3D segment length.
DMA-API: v3d 1002000000.v3d: mapping sg segment longer than device
claims to support [len=8290304] [max=65536]
WARNING: CPU: 0 PID: 493 at kernel/dma/debug.c:1179 debug_dma_map_sg+0x330/0x388
CPU: 0 UID: 0 PID: 493 Comm: Xorg Not tainted 6.12.53-yocto-standard #1
Hardware name: Raspberry Pi 5 Model B Rev 1.0 (DT)
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : debug_dma_map_sg+0x330/0x388
lr : debug_dma_map_sg+0x330/0x388
sp : ffff8000829a3ac0
x29: ffff8000829a3ac0 x28: 0000000000000001 x27: ffff8000813fe000
x26: ffffc1ffc0000000 x25: ffff00010fdeb760 x24: 0000000000000000
x23: ffff8000816a9bf0 x22: 0000000000000001 x21: 0000000000000002
x20: 0000000000000002 x19: ffff00010185e810 x18: ffffffffffffffff
x17: 69766564206e6168 x16: 74207265676e6f6c x15: 20746e656d676573
x14: 20677320676e6970 x13: 5d34303334393134 x12: 0000000000000000
x11: 00000000000000c0 x10: 00000000000009c0 x9 : ffff8000800e0b7c
x8 : ffff00010a315ca0 x7 : ffff8000816a5110 x6 : 0000000000000001
x5 : 000000000000002b x4 : 0000000000000002 x3 : 0000000000000008
x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff00010a315280
Call trace:
debug_dma_map_sg+0x330/0x388
__dma_map_sg_attrs+0xc0/0x278
dma_map_sgtable+0x30/0x58
drm_gem_shmem_get_pages_sgt+0xb4/0x140
v3d_bo_create_finish+0x28/0x130 [v3d]
v3d_create_bo_ioctl+0x54/0x180 [v3d]
drm_ioctl_kernel+0xc8/0x140
drm_ioctl+0x2d4/0x4d8 |
